Give the six figure grid reference of the brick kiln -SST 10th

Give the six figure grid reference of the brick kiln -SST 10th
by

1 Answer

Answer :

(a) (i) 089132 (ii) 059128 (b ) 0916 trellis 0712 radial (c) (i) 1014 (ii) 0816, 0916 (d) 5.5 kms (e)  (i) broken ground (ii) caused due to erosion during heavy rain at the time of flooding. (f) (i) nucleated (ii) people build their houses in areas where there are wells and they can do some farming. This is shown by yellow colour on the map. (g)  north east to south west. An arrow in the bed of the river indicates this. (h) Farming and cattle grazing. (i) (i) Marol to Mitan cart track. (ii) Revdar to Karaunti metalled road (j)  broken ground and stiples in the river.
by

Related questions

Give the six figure grid reference of: (i) the brick kiln (ii) the temple near Asav -Geography

Description : Give the six figure grid reference of: (i) the brick kiln (ii) the temple near Asav -Geography

Last Answer : (a) (i) Brick kiln - 088131 (ii) The temple near Asav - 059127 (b) Pattern of drainage in square 0916 is Radial and in 0712 is trellis. (c) Four figure grid reference of: (i) Stony ... seasonal rainfall in the given area are : (1) Seasonal rivers and streams. (2) Presence of broken ground.

Give the six figure grid reference of : The temple in village Dhavli -SST 10th

Description : Give the six figure grid reference of : The temple in village Dhavli -SST 10th

Last Answer : (a) (i) 111073 (ii) 138045 (b) (i) The relative depth of the embankment is 6 m. (ii) It is salty water. (c) (i) Cliff (ii) Footpath. (d) The rainfall is seasonal because most of the streams ... The region is mountaineous and does not have transport facilities. (j) (i) 1023 - 260 = 763 m (ii) NW.

Give the six figure grid reference of : Triangulated height 217 -SST 10th

Description : Give the six figure grid reference of : Triangulated height 217 -SST 10th

Last Answer : (a) Six fig. grid reference are: (i) D 217 - 940792 (ii) lined well - 925814. (b) (i) Left bank tributary is Balaram nadi. (ii) It is flowing from SE to NW. (c) (i) ... Nucleated. (ii) One region unsuitable for the cultivation of crops is broken ground/white coloured region which is a barren land.

Give the six figure grid reference of : Triangulated height 307. -SST 10th

Description : Give the six figure grid reference of : Triangulated height 307. -SST 10th

Last Answer : (a) (i) 859843 (ii) 860788. (b) (i) 8189 (ii) 8188. (c) 8 cm = 4 km. (d) (i) broken ground (ii) perennial stream. (e) (i) Nucleated (ii) There are a number of ... the horizontal distance between two points on the map to the distance of the corresponding points on the ground. (ii) 1 : 50000.

Study the extract of the Survey of India Map Sheet No. 45D/7 and answer the following questions Give the six figure grid reference for : -Geography

Description : Study the extract of the Survey of India Map Sheet No. 45D/7 and answer the following questions Give the six figure grid reference for : -Geography

Last Answer : (a) Six Figure grid reference are : (i) Surveyed tree 219-979755. (ii) Triangulated height 364-957744. (b) Direction of flow of River Banas is from ENE to WSW. Evidence: Contour ... vertical line running along with 93 easting is Longitude. (ii) RS near Chitrasani settlement is Railway Station.

Study the extract of the Survey of India Map sheet No. 45D/7 and answer the following questions: (a) Give the six figure grid reference of: -Geography

Description : Study the extract of the Survey of India Map sheet No. 45D/7 and answer the following questions: (a) Give the six figure grid reference of: -Geography

Last Answer : (a) (i) ∆364-957744 (ii) The temple at Rampura = 954806 (b) Two features seen in the map which show that the region has seasonal rainfall: (i) Seasonal rivers and streams (ii) Broken ground. ... and the corresponding distance on the earth's surface. The scale of the map provided is 2 cm = 1 km.

How to find four-figure and six-figure grid reference? -SST 10th

Description : How to find four-figure and six-figure grid reference? -SST 10th

Last Answer : Four-figure grid reference: Square grid or four-figure grid reference e.g., the four figure grid reference of A in the figure is 6218. It means that A lies between Eastings 62 to 63 and ... there are squares in which are written QC and QD. These denote two lettered number of 100 square km.

Give the four figure grid reference of a settlement with Spot height 261 -SST 10th

Description : Give the four figure grid reference of a settlement with Spot height 261 -SST 10th

Last Answer : (a) (i) 1107 (ii) 1003 (b) 1606-Radial 1007-Trellis. (c) Two natural features seen in grid 0910 are: (i) River (ii) Broken ground. (d) The distance along the metalled road from the ... dry motors can cross this area. The map extract indicates that it is a dry summer season, rains have not come.

Give the four-figure grid reference of : Dadarla and Bhamra -SST 10th

Description : Give the four-figure grid reference of : Dadarla and Bhamra -SST 10th

Last Answer : (a) The four figure grid reference of: (i) Dadarla -1020 (ii) Bhamra - 0420 (b) Dantrai is the largest settlement shown on the map extract. Post Office (PO) is the one communication facility ... indicates the cart-track. It is a path broader than a pack track, made by bullock or horse cart.

(i) Give the four figure grid reference of the settlement of Hamirpura. -Geography

Description : (i) Give the four figure grid reference of the settlement of Hamirpura. -Geography

Last Answer : (a) (i) 0123-Settlement of Hamirpura. (ii) 078187-Temple in the Settlement of Jolpur. (b) (i) Unlined well. (ii) North-West. (c) (i) Settlement pattern in 0725-Dispersed Settlement pattern in Idarla-Nucleated. (ii) ... L B = 3 km 10 km = 30 km2 (j) (i) Longitude. (ii) Spot height 302 m.

In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace, producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 TPD GCV of coal : 4500 kcal/kg Power Purchased from Grid : 82400 kWh / day Specific Energy consumption for Kiln producing Sponge Iron: 120 kWh / ton sponge iron Calculate the following 1. Specific Energy Consumption of Induction melting furnace in terms of kWh/ton of molten steel 2. Specific Energy Consumption of the entire plant, in terms of kcal/kg of molten steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace,  producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten  steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Last Answer :  a) Specific Energy Consumption of Induction Melting Furnace  Molten Steel Production from the Induction melting furnace per day  = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE  = 655864000/107  = 65.586 ToE

Give four-figure grid references of the following: -SST 10th

Description : Give four-figure grid references of the following: -SST 10th

Last Answer : (a) (i) 0722 (ii) 0826 (iii) 0526 (iv) 0918 (v) 0721 (b) (i) 032238 (ii) 050210 (iii) 019187 (iv) 075188 (v) 085259 (c ) (i) North-west (ii) South-west (iii) East ... is cart track. This is mainly because this is a rural area and most of these cart tracks connect villages in this region.

What are ‘National Grid Reference’? -SST 10th

Description : What are ‘National Grid Reference’? -SST 10th

Last Answer : Grid lines are imaginary lines drawn on a survey map in red colour. The origin of the Grid is a point south-west of the map. The ‘National Grid Reference’ is used for indicating the correct position of a particular feature on the map.

Firing glass in a kiln: can a piece be fired twice?

Description : Firing glass in a kiln: can a piece be fired twice?

Last Answer : Yes. Firing at these low temperatures doesn’t make any fundamental change in the structure of the glass.

How do I make an outdoor kiln?

Description : How do I make an outdoor kiln?

Last Answer : answer:Here is a video showing construction of an outdoor kiln. Here is a print article describing open pit firing and building a brick kiln.

Does ceramics have to be fired in a kiln?

Description : Is it possible to do ceramic things if I don't have a kiln? For example in the oven? But it's probably low temperature huh?

Last Answer : Ceramics (depending on the type of clay and glaze) need temperatures above 1000 ° C (up to 1250 ° C) - you will reach a maximum of less than 300 ° C in the oven. If you have space, ... -mala-vysokozarna-pec-na-vypalovani-keramiky-drevem.html). If not, look around for the pottery that the kiln has.

Who makes thing from clay which are fired in a kiln?

Description : Who makes thing from clay which are fired in a kiln?

Last Answer : Feel Free to Answer

Who makes things made of clay which are fired in kiln?

Description : Who makes things made of clay which are fired in kiln?

Last Answer : Feel Free to Answer

How do you control kiln shell red spot?

Description : How do you control kiln shell red spot?

Last Answer : How to control kiln shell red spot in burning zone

How do you control red spot in kiln burning zone?

Description : How do you control red spot in kiln burning zone?

Last Answer : Feel Free to Answer

How do you control kiln shell red spot?

Description : How do you control kiln shell red spot?

Last Answer : How to control kiln shell red spot in burning zone

A thick paste of cement, sand and water is called – (1) Concrete (2) R.C.C. (3) Mortar (4) Kiln

Description : A thick paste of cement, sand and water is called – (1) Concrete (2) R.C.C. (3) Mortar (4) Kiln

Last Answer : (3) Mortar Explanation: Mortar is a workable paste used to bind construction blocks together and fill the gaps between them. Modern mortars are typically made from a mixture of sand, a binder such as cement or lime, and water

Calcination of limestone to produce lime is done in a __________ kiln. (A) Tunnel (B) Rotary (C) Vertical shaft (D) Both (B) and (C)

Description : Calcination of limestone to produce lime is done in a __________ kiln. (A) Tunnel (B) Rotary (C) Vertical shaft (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

A refractory wall separating the stock and the source of heat is provided in a (A) Updraft kiln (B) Muffle furnace (C) Continuous furnace (D) None of these

Description : A refractory wall separating the stock and the source of heat is provided in a (A) Updraft kiln (B) Muffle furnace (C) Continuous furnace (D) None of these

Last Answer : (B) Muffle furnace

Large tonnage of refractory bricks are dried in a (A) Shaft furnace (B) Rotary hearth furnace (C) Tunnel kiln (D) Muffle furnace

Description : Large tonnage of refractory bricks are dried in a (A) Shaft furnace (B) Rotary hearth furnace (C) Tunnel kiln (D) Muffle furnace

Last Answer : (C) Tunnel kiln

Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Description : Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Last Answer : (B) 40

Which of the following is a heat treatment furnace? (A) Muffle furnace (B) Annealing furnace (C) Reheating furnace (D) Rotary kiln

Description : Which of the following is a heat treatment furnace? (A) Muffle furnace (B) Annealing furnace (C) Reheating furnace (D) Rotary kiln

Last Answer : (B) Annealing furnace

Reducing atmosphere is maintained in a (A) Calcination kiln (B) Blast furnace (C) Soaking pit (D) L.D. converter

Description : Reducing atmosphere is maintained in a (A) Calcination kiln (B) Blast furnace (C) Soaking pit (D) L.D. converter

Last Answer : (B) Blast furnace

Which of the following is not a directly fired furnace? (A) By-product coke oven (B) Calcination kiln (C) Sintering furnace (D) Open hearth furnace

Description : Which of the following is not a directly fired furnace? (A) By-product coke oven (B) Calcination kiln (C) Sintering furnace (D) Open hearth furnace

Last Answer : (A) By-product coke oven

Cement Kiln is a (A) Rotary Kiln (B) Tunnel Kiln (C) Natural draft furnace (D) Batch furnace

Description : Cement Kiln is a (A) Rotary Kiln (B) Tunnel Kiln (C) Natural draft furnace (D) Batch furnace

Last Answer : (A) Rotary Kiln

Which of the following is a periodic furnace? (A) Tunnel kiln (B) Rotary kiln (C) Soaking pit (D) Reheating furnace

Description : Which of the following is a periodic furnace? (A) Tunnel kiln (B) Rotary kiln (C) Soaking pit (D) Reheating furnace

Last Answer : (C) Soaking pit

Which of the following is a directly fired intermittent furnace? (A) Walking beam reheating furnace (B) Reverberatory furnace (C) Tower furnace (D) Tunnel kiln

Description : Which of the following is a directly fired intermittent furnace? (A) Walking beam reheating furnace (B) Reverberatory furnace (C) Tower furnace (D) Tunnel kiln

Last Answer : (B) Reverberatory furnace

Calcination reaction of limestone (CaCO3 → CaO + CO2 ) goes to completion in the rotary kiln, because (A) CaO is not dissociated (B) CO2 escapes continuously (C) Of high calcination temperature (D) CaO is more stable than CaCO3

Description : Calcination reaction of limestone (CaCO3 → CaO + CO2 ) goes to completion in the rotary kiln, because (A) CaO is not dissociated (B) CO2 escapes continuously (C) Of high calcination temperature (D) CaO is more stable than CaCO3

Last Answer : (B) CO2 escapes continuously

How much temperature is maintained during quicklime manufacture in the calcination zone of the vertical shaft kiln? (A) 500°C (B) 750°C (C) 1000°C (D) 1500°C

Description : How much temperature is maintained during quicklime manufacture in the calcination zone of the vertical shaft kiln? (A) 500°C (B) 750°C (C) 1000°C (D) 1500°C

Last Answer : (C) 1000°C

Coal tar is used as a (A) Binding material for coal briquettes (B) Fuel in rotary kiln (C) Binder in making carbon electrodes (D) All (A), (B) and (C)

Description : Coal tar is used as a (A) Binding material for coal briquettes (B) Fuel in rotary kiln (C) Binder in making carbon electrodes (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Rotary kiln is not involved in the production of (A) Cement (B) Lime from limestone (C) Slaked lime from quick lime (D) None of these

Description : Rotary kiln is not involved in the production of (A) Cement (B) Lime from limestone (C) Slaked lime from quick lime (D) None of these

Last Answer : (C) Slaked lime from quick lime

Calcination of limestone is not done in a __________ kiln for producing lime. (A) Vertical shaft (B) Rotary (C) Fluidised bed (D) Fixed bed

Description : Calcination of limestone is not done in a __________ kiln for producing lime. (A) Vertical shaft (B) Rotary (C) Fluidised bed (D) Fixed bed

Last Answer : (D) Fixed bed

Refractory bricks having high thermal conductivity is desirable, when it is to be used in the (A) L.D. converter (B) Blast furnace (C) Rotary kiln (D) Recuperator

Description : Refractory bricks having high thermal conductivity is desirable, when it is to be used in the (A) L.D. converter (B) Blast furnace (C) Rotary kiln (D) Recuperator

Last Answer : (D) Recuperator

Rotary lime kiln is an example of a/an __________ system. (A) Closed (B) Open (C) Isolated (D) Non-thermodynamic

Description : Rotary lime kiln is an example of a/an __________ system. (A) Closed (B) Open (C) Isolated (D) Non-thermodynamic

Last Answer : (B) Open

To obtain cement dry powder, lime stones and shales or their slurry, is burnt in a rotary kiln at a temperature between (A) 1100° and 1200°C (B) 1200° and 1300°C (C) 1300° and 1400°C (D) 1400° and 1500°C

Description : To obtain cement dry powder, lime stones and shales or their slurry, is burnt in a rotary kiln at a temperature between (A) 1100° and 1200°C (B) 1200° and 1300°C (C) 1300° and 1400°C (D) 1400° and 1500°C

Last Answer : D

Pick up the correct statement from the following: (A) Bull's trench kiln a trench excavated in ground (B) Hoffman's kiln is constructed over ground (C) Tunnel Kiln is constructed as a tunnel (D) All the above

Description : Pick up the correct statement from the following: (A) Bull's trench kiln a trench excavated in ground (B) Hoffman's kiln is constructed over ground (C) Tunnel Kiln is constructed as a tunnel (D) All the above

Last Answer : Answer: Option D

The kiln which may work throughout the year, is (A) Clamp (B) Bull's kiln (C) Hoffman's kiln (D) None of these

Description : The kiln which may work throughout the year, is (A) Clamp (B) Bull's kiln (C) Hoffman's kiln (D) None of these

Last Answer : Answer: Option C

Advantage of a clamp compared to a kiln for burning bricks is that (A) It takes less time for burning (B) It gives more output of first class bricks (C) It has less initial cost (D) It is suitable when bricks are required in large numbers

Description : Advantage of a clamp compared to a kiln for burning bricks is that (A) It takes less time for burning (B) It gives more output of first class bricks (C) It has less initial cost (D) It is suitable when bricks are required in large numbers

Last Answer : Answer: Option C

Non-volatile heavy metals in kiln are fixed into ____ a) Clinker’s crystalline structure b) Fumes c) Solid lump d) Slag

Description : Non-volatile heavy metals in kiln are fixed into ____ a) Clinker’s crystalline structure b) Fumes c) Solid lump d) Slag

Last Answer : Clinker’s crystalline structure

What is the combustion temperature range in cement kiln incineration? a) 1300-1600 b) 1350-1650 c) 1250-1450 d) 1235-1600

Description : What is the combustion temperature range in cement kiln incineration? a) 1300-1600 b) 1350-1650 c) 1250-1450 d) 1235-1600

Last Answer : 1350-1650

In the manufacture of cement, the dry of wet mixtue of calcareous and argillaceous materials is burnt in a (a) A Rotary kiln (b) A Grinder (c) Country kiln (d) All the above

Description : In the manufacture of cement, the dry of wet mixtue of calcareous and argillaceous materials is burnt in a (a) A Rotary kiln (b) A Grinder (c) Country kiln (d) All the above

Last Answer : (a) A Rotary kiln

Define lime and explain manufacturing of lime by continuous kiln with neat sketch.

Description : Define lime and explain manufacturing of lime by continuous kiln with neat sketch.

Last Answer : Lime: The moisture and carbon dioxide are removed from the limestone by the process of calcination and the product which is remained after removing the moisture and carbon dioxide is termed as lime. The ... with as of fuel. Its thermal efficiency is however higher than of other furnaces.

A thick paste of cement, sand and water is called (1) Concrete (2) R.C.C. (3) Mortar (4) Kiln

Description : A thick paste of cement, sand and water is called (1) Concrete (2) R.C.C. (3) Mortar (4) Kiln

Last Answer : Mortar

A company limited by shares has to call the statutory meeting within a period of not less than one month and not more than six months. This period is counted with reference to which one of the following ? (A) The date of incorporation (B) The date at which the company is entitled to commence business (C) The date of actual receipt of certificate of incorporation (D) The date of actual commencement of business

Description : A company limited by shares has to call the statutory meeting within a period of not less than one month and not more than six months. This period is counted with reference to which one of ... date of actual receipt of certificate of incorporation (D) The date of actual commencement of business

Last Answer : Answer: The date at which the company is entitled to commence business

The first scientific reference to these objects was a 1611 treatise by Johannes Kepler titled A New Year’s Gift or On the Six-Cornered ____. It would be 300 years before his question (of why they always exhibit a six- fold symmetry) could finally be answ

Description : The first scientific reference to these objects was a 1611 treatise by Johannes Kepler titled A New Year’s Gift or On the Six-Cornered ____. It would be 300 years before his question (of why they always exhibit a six- fold symmetry) could finally be answ

Last Answer : Snowflakes OR Snow crystals.