Advantage of a clamp compared to a kiln for burning bricks is that (A) It takes less time for burning (B) It gives more output of first class bricks (C) It has less initial cost (D) It is suitable when bricks are required in large numbers

Advantage of a clamp compared to a kiln for burning bricks is that
(A) It takes less time for burning
(B) It gives more output of first class bricks
(C) It has less initial cost
(D) It is suitable when bricks are required in large numbers
by

1 Answer

Answer :

Answer: Option C
by

Related questions

The kiln which may work throughout the year, is (A) Clamp (B) Bull's kiln (C) Hoffman's kiln (D) None of these

Description : The kiln which may work throughout the year, is (A) Clamp (B) Bull's kiln (C) Hoffman's kiln (D) None of these

Last Answer : Answer: Option C

Large tonnage of refractory bricks are dried in a (A) Shaft furnace (B) Rotary hearth furnace (C) Tunnel kiln (D) Muffle furnace

Description : Large tonnage of refractory bricks are dried in a (A) Shaft furnace (B) Rotary hearth furnace (C) Tunnel kiln (D) Muffle furnace

Last Answer : (C) Tunnel kiln

The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

Description : The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

Last Answer : (C) Requires more labour

Refractory bricks having high thermal conductivity is desirable, when it is to be used in the (A) L.D. converter (B) Blast furnace (C) Rotary kiln (D) Recuperator

Description : Refractory bricks having high thermal conductivity is desirable, when it is to be used in the (A) L.D. converter (B) Blast furnace (C) Rotary kiln (D) Recuperator

Last Answer : (D) Recuperator

Pug mill is used for (A) Preparation of clay (B) Moulding of clay (C) Drying of bricks (D) Burning of bric

Description : Pug mill is used for (A) Preparation of clay (B) Moulding of clay (C) Drying of bricks (D) Burning of bricks

Last Answer : Answer: Option A

Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia

Description : Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia

Last Answer : Answer: Option A

How do you control red spot in kiln burning zone?

Description : How do you control red spot in kiln burning zone?

Last Answer : Feel Free to Answer

A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Description : A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Last Answer : (A) Incurs smaller pressure drop

Following is advantage of hyperbolic design a) Less initial cost b) Less noise c) Less vibration d) All above

Description : Following is advantage of hyperbolic design a) Less initial cost b) Less noise c) Less vibration d) All above

Last Answer : b) Less noise

Following is not the advantage of hyperbolic design a) Less maintenance cost b) Less initial cost c) Less noise d) All of the above

Description : Following is not the advantage of hyperbolic design a) Less maintenance cost b) Less initial cost c) Less noise d) All of the above

Last Answer : b) Less initial cost

To which polarity does a positive damper with positive bins clamp the most negative extremity of the output waveform (positive or negative)?

Description : To which polarity does a positive damper with positive bins clamp the most negative extremity of the output waveform (positive or negative)?

Last Answer : Positive potential.

Which of the following bricks are used for lining of furnaces? (A) Over-burnt bricks (B) Under-burnt bricks (C) Refractory bricks (D) First class bricks

Description : Which of the following bricks are used for lining of furnaces? (A) Over-burnt bricks (B) Under-burnt bricks (C) Refractory bricks (D) First class bricks

Last Answer : Answer: Option C

To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Description : To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Last Answer : Option D

The minimum compressive strength of 1st class bricks should be (A) 75 kg/cm2 (B) 90 kg/cm2 (C) 100 kg/cm2 (D) 120 kg/cm2

Description : The minimum compressive strength of 1st class bricks should be (A) 75 kg/cm2 (B) 90 kg/cm2 (C) 100 kg/cm2 (D) 120 kg/cm2

Last Answer : Answer: Option C

Second class bricks (A) Are of dark brown colour (B) Produce a metallic sound when struck (C) Are well burnt (D) Are under burnt

Description : Second class bricks (A) Are of dark brown colour (B) Produce a metallic sound when struck (C) Are well burnt (D) Are under burnt

Last Answer : Answer: Option B

The minimum compressive strength of 2nd class bricks should be (A) 75 kg/cm2 (B) 90 kg/cm2 (C) 100 kg/cm2 (D) 120 kg/cm

Description : The minimum compressive strength of 2nd class bricks should be (A) 75 kg/cm2 (B) 90 kg/cm2 (C) 100 kg/cm2 (D) 120 kg/cm

Last Answer : Answer: Option A

For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500

Description : For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500

Last Answer : Answer: Option D

Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Description : Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Last Answer : Answer: Option C

The clay to be used for manufacturing bricks for a large project, is dugout and allowed to weather throughout (A) The monsoon (B) The winter (C) The summer (D) None of these

Description : The clay to be used for manufacturing bricks for a large project, is dugout and allowed to weather throughout (A) The monsoon (B) The winter (C) The summer (D) None of these

Last Answer : Answer: Option A

The size of mould for bricks, is generally kept (A) A little large to specified size (B) A little small to specified size (C) Equal to specified size (D) 10% larger than specified size

Description : The size of mould for bricks, is generally kept (A) A little large to specified size (B) A little small to specified size (C) Equal to specified size (D) 10% larger than specified size

Last Answer : Answer: Option A

Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Description : Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Last Answer : (B) Takes 2-3 days for coking of coal but requires no external fuel for heating

Which of the following factors most likely would heighten an auditor's concern about the risk of fraudulent financial reporting? a. Large amounts of liquid assets that are easily convertible into cash. b. Low growth and profitability as compared to other entity's in the same industry. c. Financial management's participation in the initial selection of accounting principles. d. An overly complex organizational structure involving unusual lines of authority.

Description : Which of the following factors most likely would heighten an auditor's concern about the risk of fraudulent financial reporting? a. Large amounts of liquid assets that are easily ... of accounting principles. d. An overly complex organizational structure involving unusual lines of authority.

Last Answer : An overly complex organizational structure involving unusual lines of authority.

Why is water not suitable for putting out a petrol fire? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by water (3) The heat required for combustion of petrol is very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Description : Why is water not suitable for putting out a petrol fire? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by ... very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Last Answer : (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns Explanation: Water is not effective on petrol fire because it has higher density than ... while petrol stays afloat and keeps burning. Petrochemical fires are nearly always extinguished with chemical foam.

Why is water not suitable for putting out a petrol fire? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by water (3) The heat required for combustion of petrol is very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Description : Why is water not suitable for putting out a petrol fire? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by ... very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Last Answer : (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns Explanation: Water is not effective on petrol fire because it has higher density than petrol as a ... extinguished with chemical foam which forms a blanket over the flames and cuts off the oxygen supply.

Why is water not suitable for putting out a petrol fire ? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by water (3) The heat required for combustion of petrol is very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Description : Why is water not suitable for putting out a petrol fire ? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by ... very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns 

Last Answer : Water, being heavy, slips below petrol which thus remains in contact with air and burns

As compared to ordinary Portland cement, high alumina cement has (A) Higher initial setting time but lower final setting time (B) Lower initial setting time but higher final setting time (C) Higher initial and final setting times (D) Lower initial and final setting times

Description : As compared to ordinary Portland cement, high alumina cement has (A) Higher initial setting time but lower final setting time (B) Lower initial setting time but higher final setting time (C) Higher initial and final setting times (D) Lower initial and final setting times

Last Answer : Answer: Option A

Pick up the incorrect statement from the following: (A) Hydraulic lime is generally obtained by burning kankar (B) Hydraulic lime sets slowly as compared to fat lime (C) Hydraulic lime is generally used in lime mortar (D) None of these

Description : Pick up the incorrect statement from the following: (A) Hydraulic lime is generally obtained by burning kankar (B) Hydraulic lime sets slowly as compared to fat lime (C) Hydraulic lime is generally used in lime mortar (D) None of these

Last Answer : Answer: Option D

To obtain cement dry powder, lime stones and shales or their slurry, is burnt in a rotary kiln at a temperature between (A) 1100° and 1200°C (B) 1200° and 1300°C (C) 1300° and 1400°C (D) 1400° and 1500°C

Description : To obtain cement dry powder, lime stones and shales or their slurry, is burnt in a rotary kiln at a temperature between (A) 1100° and 1200°C (B) 1200° and 1300°C (C) 1300° and 1400°C (D) 1400° and 1500°C

Last Answer : D

Pick up the correct statement from the following: (A) Bull's trench kiln a trench excavated in ground (B) Hoffman's kiln is constructed over ground (C) Tunnel Kiln is constructed as a tunnel (D) All the above

Description : Pick up the correct statement from the following: (A) Bull's trench kiln a trench excavated in ground (B) Hoffman's kiln is constructed over ground (C) Tunnel Kiln is constructed as a tunnel (D) All the above

Last Answer : Answer: Option D

In the manufacture of cement, the dry of wet mixtue of calcareous and argillaceous materials is burnt in a (a) A Rotary kiln (b) A Grinder (c) Country kiln (d) All the above

Description : In the manufacture of cement, the dry of wet mixtue of calcareous and argillaceous materials is burnt in a (a) A Rotary kiln (b) A Grinder (c) Country kiln (d) All the above

Last Answer : (a) A Rotary kiln

For centrifugal pumps (A) Initial cost is low (B) Limited space is required (C) The discharge obtained is steady and non-pulsating (D) All the above

Description : For centrifugal pumps  (A) Initial cost is low  (B) Limited space is required  (C) The discharge obtained is steady and non-pulsating  (D) All the above 

Last Answer : (D) All the above 

. Is not an advantage of this system of irrigation (Drip). a. Water application efficiency is high. b. Recycled non-portable water can be safely used. c. Moisture within the root zone can be maintained. d. Initial cost is more than overhead syste

Description : . Is not an advantage of this system of irrigation (Drip). a. Water application efficiency is high. b. Recycled non-portable water can be safely used. c. Moisture within the root zone can be maintained. d. Initial cost is more than overhead syste

Last Answer : d. Andhra Pradesh

Is not an advantage of this system of irrigation (Drip). a. Water application efficiency is high. b. Recycled non-portable water can be safely used. c. Moisture within the root zone can be maintained. d. Initial cost is more than overhead s

Description : Is not an advantage of this system of irrigation (Drip). a. Water application efficiency is high. b. Recycled non-portable water can be safely used. c. Moisture within the root zone can be maintained. d. Initial cost is more than overhead s

Last Answer : d. Initial cost is more than overhead systems.

What is Output: a) What the processor takes from the user b) What the processor gives to the userc) What the processor gets from the userd) None of These

Description : What is Output: a) What the processor takes from the user b) What the processor gives to the user c) What the processor gets from the user d) None of These

Last Answer : b) What the processor gives to the user

What is Output: a) What the processor takes from the user b) What the processor gives to the user c) What the processor gets from the user d) None of These

Description : What is Output: a) What the processor takes from the user b) What the processor gives to the user c) What the processor gets from the user d) None of These

Last Answer : b) What the processor gives to the user

What is output? a) What the processor takes from the user b) What the user gives to the processor c) What the processor gets from the user d) What the processor gives to the usere) None of these

Description : What is output? a) What the processor takes from the user b) What the user gives to the processor c) What the processor gets from the user d) What the processor gives to the user e) None of these

Last Answer : d) What the processor gives to the user

What The human cerebrum is disproportionately large compared to the cerebrum of the other animals. What advantage does this give to humans?

Description : What The human cerebrum is disproportionately large compared to the cerebrum of the other animals. What advantage does this give to humans?

Last Answer : Need answer

Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Description : Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Which of the following is not an advantage of hybrid vehicles. 1) Environmentally friendly. 2) Initial cost is low. 3) Better mileage. 4) Higher energy conservation.

Description : Which of the following is not an advantage of hybrid vehicles. 1) Environmentally friendly. 2) Initial cost is low. 3) Better mileage. 4) Higher energy conservation.

Last Answer : 2) Initial cost is low.

An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Description : An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Last Answer : A. Palatal reduction may be of minimal thickness.

An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Description : An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Last Answer : A. Palatal reduction may be of minimal thickness

Regarding plane-table survey, which of the following statements does not hold? (a) All the plotting work including contouring can be done in the field (b) It is quite suitable for small scale survey (c) Less number of control points are required (d) It can be done in all seasons

Description : Regarding plane-table survey, which of the following statements does not hold? (a) All the plotting work including contouring can be done in the field (b) It is quite suitable for small scale survey (c) Less number of control points are required (d) It can be done in all seasons

Last Answer : (d) It can be done in all seasons

Regenerators as compared to recuperators for the same duty(A) Store smaller quantity of waste heat (B) Are lighter & compact (C) Involve higher initial cost (D) All (A), (B) & (C)

Description : Regenerators as compared to recuperators for the same duty(A) Store smaller quantity of waste heat (B) Are lighter & compact (C) Involve higher initial cost (D) All (A), (B) & (C)

Last Answer : (C) Involve higher initial cost

Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile matter coals are more suitable for making pulverised fuel (C) Regulation of furnace temperature and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Description : Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile ... and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Last Answer : (D) None of these

Which of the following advantage does not possess by the rapid prototyping process over thetraditional prototyping process? a.It consumes less time b.Gives better quality c.Reduces product launch time d.It's cheaper

Description : Which of the following advantage does not possess by the rapid prototyping process over thetraditional prototyping process? a.It consumes less time b.Gives better quality c.Reduces product launch time d.It's cheaper

Last Answer : d.It's cheaper

The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Description : The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Last Answer : (D) Yielding point

Wet grinding in a revolving mill __________ as compared to dry grinding. (A) Gives less wear on chamber walls (B) Requires more energy (C) Increases capacity (D) Complicates handling of the product

Description : Wet grinding in a revolving mill __________ as compared to dry grinding. (A) Gives less wear on chamber walls (B) Requires more energy (C) Increases capacity (D) Complicates handling of the product

Last Answer : (C) Increases capacity

Gyratory crushers compared to the reciprocating jaw crushers (A) Have greater capacity per unit of discharge area (B) Crush intermittently (C) Are less suitable for coarse materials (D) Have less steady power consumption

Description : Gyratory crushers compared to the reciprocating jaw crushers (A) Have greater capacity per unit of discharge area (B) Crush intermittently (C) Are less suitable for coarse materials (D) Have less steady power consumption

Last Answer : (A) Have greater capacity per unit of discharge area

Ferric stainless steels compared to austenitic stainless steels (A) Have lower corrosion resistance (B) Are harder to fabricate (C) Are less ductile and hence less suitable for cold pressing (D) All (A), (B) and (C)

Description : Ferric stainless steels compared to austenitic stainless steels (A) Have lower corrosion resistance (B) Are harder to fabricate (C) Are less ductile and hence less suitable for cold pressing (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The advantage of reinforced concrete, is due to (A) Monolithic character (B) Fire-resisting and durability (C) Economy because of less maintenance cost (D) All the abov

Description : The advantage of reinforced concrete, is due to (A) Monolithic character (B) Fire-resisting and durability (C) Economy because of less maintenance cost (D) All the abov

Last Answer : Answer: Option D