Choose the correct statement about inflammable substance from the following. They have
a) low ignition temperature and cannot catch fire easily.
b) high ignition temperature and can catch fire easily .
c) low ignition temperature and can catch fire easily
d) high ignition temperature and cannot catch fire easily

1 Answer

Answer :

c) low ignition temperature and can catch fire easily

Related questions

Description : The lowest temperature which at which a substance catches fire is ________ temperature. a) ignition b)boiling c)freezing d)none

Last Answer : a) ignition

Description : The material which on heating in presence of oxygen catches fire easily and produces heat and light energy is known as _________ material. a) combustible b)non-combustible c)conducting d)none

Last Answer : a) combustible

Description : Choose the incorrect statement from the following : Forest fires are usually due to a) carelessness of humans c) heat of sun b) cutting of trees d) lightning strike

Last Answer : b) cutting of trees

Description : On a cold winter night , the process sleeping in a room with closed door and windows with coal fire burning inside may die due to the excessive accumulation of a) nitrogen monoxide b) nitrogen dioxide c) carbon dioxide d) carbon monoxide

Last Answer : d) carbon monoxide

Description : The substance that does not burn with flame is a) LPG b)camphor c)dry grass d)charcoal

Last Answer : d)charcoal

Description : A substance which reacts with oxygen giving heat is called a combustible substance. Which one of the following is a combustible substance? a) iron nail b)glass c)stone piece d)wood

Last Answer : d)wood

Description : _________ is a substance which undergoes spontaneous combustion. a) wood b)coal c)sodium d)cow dung cakes

Last Answer : c)sodium

Description : Increase in temperature due to excess of carbon dioxide in air which traps heat energy is known as _______ . a) global warming b)soot c)ash d)acid rain

Last Answer : a) global warming

Description : The calorific value of fuel is expressed in unit called a) kilojoule per litre c) kilogram per millilitre b) kilogram per gram d) kilo joule per kilogram

Last Answer : d) kilo joule per kilogram

Description : On placing an inverted tumbler over a burning candle, the flame extinguishes after some – time . This is because of non –availability of a) oxygen b)water vapour c)carbon dioxide d)wax

Last Answer : a) oxygen

Description : Magnesium ribbon on burning in air produces a) magnesium oxide ,water and light c) magnesium oxide and heat b) magnesium oxide , heat and light d) magnesium oxide, water and heat

Last Answer : b) magnesium oxide , heat and light

Description : Which one of the following has highest calorific value? a) kerosene b)biogas c)LPG d)petrol

Last Answer : c)LPG

Description : The ________ zone of a candle flame is the hottest zone. a) innermost b)outermost c)middle d)none

Last Answer : b)outermost

Description : The _________ gas produced during burning of coal is responsible for causing acid rain . a) oxygen b)sulphur dioxide c)nitrogen d)water vapour

Last Answer : b)sulphur dioxide

Description : ________ fuels produce least amount of harmful gases and do not leave behind solid residue on combustion. a) solid b)gaseous c)liquid d )semi-solid

Last Answer : b)gaseous

Description : The unit of calorific value of fuel is __________ . a) Kj /Kg b) J/Kg c)Kj /g d)J/g

Last Answer : a) Kj /Kg

Description : The middle zone of a candle flame is known as the ________ zone. a) luminous b)non-luminous c)wax d)burning

Last Answer : a) luminous

Description : _______ is highly poisonous gas produced as a result of incomplete combustion. a) oxygen b)carbon dioxide c)carbon mono oxide d)soot

Last Answer : c)carbon mono oxide

Description : ________ present in air helps in combustion of fuel. a) oxygen b)nitrogen c)carbon-di-oxide d)carbon –mono-oxide

Last Answer : a) oxygen

Description : Discuss in brief process of combustion in SI engines with a sketch.

Last Answer : Combustion In S I Engine According to Ricardo, There are three stages of combustion in SI Engine as shown in figure above 1. Ignition lag stage 2. Flame propagation stage 3. After ... combustion is known as after burning. This generally happens when the rich mixture is supplied to engine. 

Description : Why is water not suitable for putting out a petrol fire? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by ... very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Last Answer : (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns Explanation: Water is not effective on petrol fire because it has higher density than ... while petrol stays afloat and keeps burning. Petrochemical fires are nearly always extinguished with chemical foam.

Description : Why is water not suitable for putting out a petrol fire? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by ... very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Last Answer : (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns Explanation: Water is not effective on petrol fire because it has higher density than petrol as a ... extinguished with chemical foam which forms a blanket over the flames and cuts off the oxygen supply.

Description : Why is water not suitable for putting out a petrol fire ? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by ... very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns 

Last Answer : Water, being heavy, slips below petrol which thus remains in contact with air and burns

Description : The substance that is least prone to catch and spread fire is (a) nylon (b) terycot (c) cotton (d) polyester

Last Answer : Ans:(c)

Description : Alcohols alone cannot be used in CI engines as a) their self ignition temperature is high b) latent heat of vaporization is high c) all of the mentioned d) none of the mentioned

Last Answer : Answer: c Explanation: None.

Description : A coal having higher volatile matter content, has lower (A) Smoking tendency on burning (B) Coke oven gas yield on carbonisation (C) Chance of catching fire during storage in open space (D) Ignition temperature

Last Answer : (D) Ignition temperature

Description : Baryllium Sulphate is less soluble in water due to (1) High inflammable energy (2) Low Energy of dissociation (3) Low inflammable energy (4) Lonic band

Last Answer : High inflammable energy

Description : You win a contest where you can pick out any car, truck, etc. The catch is that you cannot own/rent/buy another vehicle for 30 years. What vehicle would you choose?

Last Answer : Bugatti La Voiture Noire. Then sell it, buy a nice house in a city, and walk to places.

Description : Choose the incorrect statement pertaining to organic compounds (1) They have low melting and boiling points (2) They do not dissolve in water (3) They are not easily combustible (4) They contain mainly carbon and hydrogen

Last Answer : They are not easily combustible

Description : The probability of knocking in diesel engines is increased by a. High self-ignition temperature. b. Low volatility. c. High viscosity. d. all of the above

Last Answer : ANSWER d. all of the above

Description : The probability of knocking in diesel engines is increased by a. High self-ignition temperature. b. Low volatility. c. High viscosity. d. All of the above

Last Answer : ANSWER d. all of the above

Description : Phosphorus is kept in water because – (1) its ignition temperature is very high (2) its ignition temperature is very low (3) its critical temperature is high (4) its critical temperature is low

Last Answer : (2) its ignition temperature is very low Explanation: The allotropic form of Phosphorus (white phosphorus) is less stable and therefore highly reactive because of angular strain in P4 molecule where the angles are only 600.

Description : Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Last Answer : (B) Low viscosity index

Description : In high temperature carbonisation (as compared to low temperature carbonisation) of coal, the (A) Gas yield is less (B) Tar yield is more (C) Ignition temperature of coke produced is less (D) Aromatic content of tar produced is more

Last Answer : (D) Aromatic content of tar produced is more

Description : A coal containing high amount of volatile matter will have (A) Low ignition temperature (B) Very little ash content (C) High fusion point of its ash (D) Low adiabatic flame temperature

Last Answer : (A) Low ignition temperature

Description : Coke used for the production of calcium carbide should have (A) Low ash content (B) Low ignition temperature (C) High electrical resistivity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Phosphorus is kept in water because (1) its ignition temperature is very high (2) its ignition temperature is very low (3) its critical temperature is high (4) its critical temperature is low

Last Answer : its ignition temperature is very low

Description : Ignition rod can be ignited from ? (i) Match box (ii) Ignition match* (iii) From fire (iv) None of the above

Last Answer : (ii) Ignition match

Description : Explain the following properties i) Pour point ii) Viscosity iii) Ignition quality iv) Fire point

Last Answer : i. Pour point: Pour point is the temperature below which the entire mass of fuel, solid or liquid together, freeze and thus cause flow of fuel impossible. Pour point is usually 5 to 10 °C below ... is the temperature at which the flash will sustain itself as a steady flame for at least five seconds.

Description : Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile ... and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Last Answer : (D) None of these

Description : Which of the following statement is incorrect?  A. The liquid fuels consist of hydrocarbons.  B. The liquid fuels have higher calorific value than solid fuels.  C. The solid fuels have higher calorific value than liquid fuels.  D. A good fuel should have low ignition point.

Last Answer : Answer: C

Description : 'Flare tower' used in industry is meant for (A) Venting off (after burning) the excess inflammable/toxic gases at high pressure (B) Absorbing the pollutant gases from the furnace exhaust (C) Cooling of furnace exhaust gases (D) None of these

Last Answer : (A) Venting off (after burning) the excess inflammable/toxic gases at high pressure

Description : Thermoplastic resins are those polymers, which (A) Has decreased plasticity at increasing temperature (B) Cannot be moulded (C) Easily deform under pressure at high temperature (D) None of these

Last Answer : (C) Easily deform under pressure at high temperature

Description : Which one of the following is not a software myth? (A) Once we write the program and get it to work, our job is done. (B) Project requirements continually change, but ... not understand how to control software projects internally, it will invariably struggle when it outsources software projects.

Last Answer : (D) If an organization does not understand how to control software projects internally, it will invariably struggle when it outsources software projects.

Description : The compression ratio cannot be increased beyond certain limit as it results in a. auto-ignition of fuel b. detonation c. engine knocking d. all the above

Last Answer : ANSWER d. all the above

Description : High aniline point of diesel indicates that, it (A) Is highly aromatic (B) Has a large ignition delay (C) Is highly paraffinic (D) Has a low diesel index

Last Answer : (C) Is highly paraffinic

Description : High aniline point of a petrofuel (say diesel) indicates that (A) It is highly aromatic in nature (B) It is highly paraffinic in nature (C) It has a very low diesel index (D) Its ignition quality is very poor

Last Answer : (B) It is highly paraffinic in nature

Description : For long flame and easy ignition, the coal used should have (A) High volatile matter (B) Low ash (C) High calorific value (D) High ash

Last Answer : (A) High volatile matter

Description : Pick out the wrong statement. (A) Tin can be readily and very easily drawn into very fine wire (B) Tin can be severely cold worked without the necessity of annealing due to its low recrystallisation temperature (C) Tin exists in two allotropic forms

Last Answer : (A) Tin can be readily and very easily drawn into very fine wire

Description : Choose the correct statement (a) A refrigerant should have low latent heat (b) If operating temperature of system is low, then refrigerant with low boiling point should be used (c) Pre-cooling and sub-cooling bf refrigerant are same (d) Superheat and sensible heat of a. refrigerant are same

Last Answer : Ans: b