'Flare tower' used in industry is meant for (A) Venting off (after burning) the excess inflammable/toxic gases at high pressure (B) Absorbing the pollutant gases from the furnace exhaust (C) Cooling of furnace exhaust gases (D) None of these

'Flare tower' used in industry is meant for
(A) Venting off (after burning) the excess inflammable/toxic gases at high pressure
(B) Absorbing the pollutant gases from the furnace exhaust
(C) Cooling of furnace exhaust gases
(D) None of these
by

1 Answer

Answer :

(A) Venting off (after burning) the excess inflammable/toxic gases at high pressure
by

Related questions

Safe limit' called Threshold Limit Value (TLV) of carbon monoxide in atmospheric air is < 50 ppm. The main source of carbon monoxide pollutant in air is the (A) Industrial chimney exhaust (B) Automobiles exhaust (C) Photochemical reaction in polluted atmosphere (D) Burning of domestic fuel

Description : Safe limit' called Threshold Limit Value (TLV) of carbon monoxide in atmospheric air is < 50 ppm. The main source of carbon monoxide pollutant in air is the (A) Industrial chimney exhaust (B) Automobiles exhaust (C) Photochemical reaction in polluted atmosphere (D) Burning of domestic fuel

Last Answer : (B) Automobiles exhaust

Supercharging is the process of a. supplying the engine with air at a density greater than the density of the surrounding atmosphere b. providing forced cooling air c. injecting excess fuel d. raising the exhaust pressure

Description : Supercharging is the process of a. supplying the engine with air at a density greater than the density of the surrounding atmosphere b. providing forced cooling air c. injecting excess fuel d. raising the exhaust pressure

Last Answer : ANSWER a. supplying the engine with air at a density greater than the density of the surrounding atmosphere

Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Description : Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Last Answer : ANSWER d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Overfire burning in a furnace is a phenomenon characterised by (A) Supply of excess fuel (B) Supply of excess air (C) Burning carbon monoxide and other incombustible in upper zone of furnace by supplying more air (D) None of these

Description : Overfire burning in a furnace is a phenomenon characterised by (A) Supply of excess fuel (B) Supply of excess air (C) Burning carbon monoxide and other incombustible in upper zone of furnace by supplying more air (D) None of these

Last Answer : (C) Burning carbon monoxide and other incombustible in upper zone of furnace by supplying more air

Overfire burning" in a furnace is a phenomenon characterised by the (A) Supply of excess fuel (B) Supply of excess air (C) Burning of carbon monoxide and other incombustibles in upper zone of furnace by supplying more air (D) None of these

Description : Overfire burning" in a furnace is a phenomenon characterised by the (A) Supply of excess fuel (B) Supply of excess air (C) Burning of carbon monoxide and other incombustibles in upper zone of furnace by supplying more air (D) None of these

Last Answer : (C) Burning of carbon monoxide and other incombustibles in upper zone of furnace by supplying more air

It is easy to detect and monitor excess air a. As oxygen not used for combustion is heated and discharged with the exhaust gases. b. Oxygen is discharged without heating c. Both a. & b. d. None of above

Description : It is easy to detect and monitor excess air a. As oxygen not used for combustion is heated and discharged with the exhaust gases. b. Oxygen is discharged without heating c. Both a. & b. d. None of above

Last Answer : a. As oxygen not used for combustion is heated and discharged with the exhaust gases.

Coke oven gas compared to blast furnace gas is (A) More explosive and inflammable (B) Less poisonous (C) Lighter (D) All (A), (B) and (C)

Description : Coke oven gas compared to blast furnace gas is (A) More explosive and inflammable (B) Less poisonous (C) Lighter (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Ammonia is (a) non-toxic (b) non-inflammable (c) toxic and non-inflammable (d) highly toxic and inflammable

Description : Ammonia is (a) non-toxic (b) non-inflammable (c) toxic and non-inflammable (d) highly toxic and inflammable

Last Answer : Ans: d

Freon group of refrigerants are (a) inflammable (d) toxic (c) non-toxic and non-inflammable (d) non-toxic and inflammable

Description : Freon group of refrigerants are (a) inflammable (d) toxic (c) non-toxic and non-inflammable (d) non-toxic and inflammable

Last Answer : Ans: c

Freon group of refrigerants are n. a) Inflammable. c) Non-inflammable and toxic o. b) Toxic. d) Nontoxic and non-inflammable

Description : Freon group of refrigerants are n. a) Inflammable. c) Non-inflammable and toxic o. b) Toxic. d) Nontoxic and non-inflammable

Last Answer : Nontoxic and non-inflammable

Why is water not suitable for putting out a petrol fire? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by water (3) The heat required for combustion of petrol is very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Description : Why is water not suitable for putting out a petrol fire? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by ... very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Last Answer : (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns Explanation: Water is not effective on petrol fire because it has higher density than ... while petrol stays afloat and keeps burning. Petrochemical fires are nearly always extinguished with chemical foam.

Why is water not suitable for putting out a petrol fire? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by water (3) The heat required for combustion of petrol is very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Description : Why is water not suitable for putting out a petrol fire? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by ... very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Last Answer : (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns Explanation: Water is not effective on petrol fire because it has higher density than petrol as a ... extinguished with chemical foam which forms a blanket over the flames and cuts off the oxygen supply.

Why is water not suitable for putting out a petrol fire ? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by water (3) The heat required for combustion of petrol is very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns

Description : Why is water not suitable for putting out a petrol fire ? (1) The oxygen content of water is isolated by petrol and thus it helps in burning (2) Petrol is too inflammable to be extinguished by ... very low (4) Water, being heavy, slips below petrol which thus remains in contact with air and burns 

Last Answer : Water, being heavy, slips below petrol which thus remains in contact with air and burns

Main pollutant present in automobile exhaust is (A) CO (B) CO2 (C) NO (D) Hydrocarbons

Description : Main pollutant present in automobile exhaust is (A) CO (B) CO2 (C) NO (D) Hydrocarbons

Last Answer : (A) CO

Peroxyacetyl nitrate (PAN), a pollutant is found in the (A) Automobile exhaust (B) Flue gas of coal based power plant (C) Exhaust of nitric acid plant (D) Exhaust of sulphuric acid plant

Description : Peroxyacetyl nitrate (PAN), a pollutant is found in the (A) Automobile exhaust (B) Flue gas of coal based power plant (C) Exhaust of nitric acid plant (D) Exhaust of sulphuric acid plant

Last Answer : (A) Automobile exhaust

Pick out the wrong statement. (A) Catalytic converter is fitted in automobiles to reduce carbon monoxide concentration in exhaust emissions (B) Inhalation of pollutant carbon monoxide results in death by asphyxiation (C) Sulphur dioxide is the main pollutant emitted from the exhaust of petrol driven automobiles (D) Decomposition of plants containing chlorophyll is a natural source of carbon monoxide in atmosphere

Description : Pick out the wrong statement. (A) Catalytic converter is fitted in automobiles to reduce carbon monoxide concentration in exhaust emissions (B) Inhalation of pollutant carbon monoxide results ... D) Decomposition of plants containing chlorophyll is a natural source of carbon monoxide in atmosphere

Last Answer : (C) Sulphur dioxide is the main pollutant emitted from the exhaust of petrol driven automobiles

Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more as compared to that emitted by a four stroke engine (C) Carbon monoxide present in the two stroke petrol engine exhaust is much less as compared to that emitted from a four stroke engine (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Description : Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more ... can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Last Answer : (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

The critical mass of a fissionable material can be reduced by (A) Heating it (B) Cooling it (C) Surrounding it by neutron reflecting material (D) Surrounding it by neutron absorbing material

Description : The critical mass of a fissionable material can be reduced by (A) Heating it (B) Cooling it (C) Surrounding it by neutron reflecting material (D) Surrounding it by neutron absorbing material

Last Answer : (C) Surrounding it by neutron reflecting material

Natural draft cooling tower are mainly used in a) Steel Industry b) Alumina industry c) Fertilizer industry d) Power station

Description : Natural draft cooling tower are mainly used in a) Steel Industry b) Alumina industry c) Fertilizer industry d) Power station

Last Answer : Power station

Acid rains are produced by (a) excess NO2 and SO2 from burning fossil fuels (b) excess production of NH3 by industry and coal gas (c) excess release of carbon monoxide by incomplete combustion (d) excess formation of CO2 by combustion and animal respiration.

Description : Acid rains are produced by (a) excess NO2 and SO2 from burning fossil fuels (b) excess production of NH3 by industry and coal  gas (c) excess release of carbon monoxide by incomplete  combustion (d) excess formation of CO2 by combustion and  animal respiration.

Last Answer : (a) excess NO2 and SO2 from burning fossil fuels

Acid rains are produced by (a) excess NO2 and SO2 from burning fossil fuels (b) excess production of NH3 by industry and coal gas (c) excess release of carbon monoxide by incomplete combustion (d) excess formation of CO2 by combustion and animal respiration.

Description : Acid rains are produced by (a) excess NO2 and SO2 from burning fossil fuels (b) excess production of NH3 by industry and coal gas (c) excess release of carbon monoxide by incomplete combustion (d) excess formation of CO2 by combustion and animal respiration.

Last Answer : (a) excess NO2 and SO2 from burning fossil fuels

which is not a pollutant from exhaust of motor vehicle ?

Description : which is not a pollutant from exhaust of motor vehicle ?

Last Answer : which is not a pollutant from exhaust of motor vehicle ? A. Hydrocarbons gas B. Fly ash C. `SO_(2)` D. CO.

The most hazardous metal pollutant of automobile exhaust is

Description : The most hazardous metal pollutant of automobile exhaust is

Last Answer : The most hazardous metal pollutant of automobile exhaust is A. Cadmium B. Lead C. Mercury D. Copper

Pollutant from motor car exhaust that causes mental disease is – (1) Lead (2) NO2 (3) SO2 (4) Hg

Description : Pollutant from motor car exhaust that causes mental disease is – (1) Lead (2) NO2 (3) SO2 (4) Hg

Last Answer : (1) Lead Explanation: Lead poisoning is a medical condition caused by increased levels of the heavy metal lead in the body. Lead interferes with a variety of body processes and is toxic to ... It interferes with the development of the nervous system, and is therefore particularly toxic to children.

Which pollutant from motor car exhaust causes mental disease ---? A. Carbon dioxide B. Lead (Answer)

Description : Which pollutant from motor car exhaust causes mental disease ---? A. Carbon dioxide B. Lead (Answer)

Last Answer : B. Lead (Answer)

Pollutant from motor car exhaust that causes mental disease is (1) Lead (2) NO2 (3) SO2 (4) Hg

Description : Pollutant from motor car exhaust that causes mental disease is (1) Lead (2) NO2 (3) SO2 (4) Hg

Last Answer : Lead

Graphite is used in nuclear reactors for- (1) reducing the speed of fast neutrons (2) cooling the reactor (3) absorbing neutrons (4) None of the above

Description : Graphite is used in nuclear reactors for- (1) reducing the speed of fast neutrons (2) cooling the reactor (3) absorbing neutrons (4) None of the above

Last Answer : (1) reducing the speed of fast neutrons Explanation: A graphite reactor is a nuclear reactor that uses carbon as a neutron moderator, which allows unenriched uranium to be used as nuclear fuel.

67 The chemical used in breather for transformer should have the quality of A. Ionizing air B. Absorbing moisture C. Cleansing the transformer oil D. Cooling the transformer oil

Description : 67 The chemical used in breather for transformer should have the quality of A. Ionizing air B. Absorbing moisture C. Cleansing the transformer oil D. Cooling the transformer oil

Last Answer : B. Absorbing moisture

Of the following, which non-fissioning element is used in the cooling water of nuclear power plants to help control the rate of the fission reaction by absorbing neutrons: w) zirconium x) boron y) krypton z) cesium

Description : Of the following, which non-fissioning element is used in the cooling water of nuclear power plants to help control the rate of the fission reaction by absorbing neutrons: w) zirconium x) boron y) krypton z) cesium

Last Answer : ANSWER: X -- BORON

Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven(B) Blast furnace stoves(C) Beehive coke oven(D) High pressure boiler

Description : Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven (B) Blast furnace stoves (C) Beehive coke oven (D) High pressure boiler

Last Answer : (D) High pressure boiler

Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature (C) Electrostatic precipitator is the most efficient dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Description : Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for ... dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Last Answer : (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature

During a slow decompression, passengers will occur: a. The cabin temperature will fall as pressure reduces b. Body cavities (sinuses, ears, etc.) will become pressurised and may require assistance in venting c. As soon as the pressure falls, the oxygen drop-out system will operate d. No contra effects, as slow decompression has no effect on the human body

Description : During a slow decompression, passengers will occur: a. The cabin temperature will fall as pressure reduces b. Body cavities (sinuses, ears, etc.) will become pressurised and may require assistance in ... will operate d. No contra effects, as slow decompression has no effect on the human body

Last Answer : b. Body cavities (sinuses, ears, etc.) will become pressurised and may require assistance in venting

Orsat apparatus is meant for (A) Gravimetric analysis of flue gas (B) Finding out combustion efficiency (C) Direct determination of nitrogen in flue gas by absorbing it in ammoniacal cuprous chloride (D) None of these

Description : Orsat apparatus is meant for (A) Gravimetric analysis of flue gas (B) Finding out combustion efficiency (C) Direct determination of nitrogen in flue gas by absorbing it in ammoniacal cuprous chloride (D) None of these

Last Answer : (D) None of these

Which of the following needs to be incorporated to prevent the low pressure turbine exhaust wetness from being excessive? a) Double regeneration b) Double carbonization c) Double reheat d) Double cooling

Description : Which of the following needs to be incorporated to prevent the low pressure turbine exhaust wetness from being excessive? a) Double regeneration b) Double carbonization c) Double reheat d) Double cooling

Last Answer : c) Double reheat

A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Description : A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Last Answer : (A) Incurs smaller pressure drop

The cooling effect in a cooling tower cannot be increased by (A) Increasing the air velocity over the wet surfaces (B) Reducing the humidity of entering air (C) Lowering the barometric pressure (D) None of these

Description : The cooling effect in a cooling tower cannot be increased by (A) Increasing the air velocity over the wet surfaces (B) Reducing the humidity of entering air (C) Lowering the barometric pressure (D) None of these

Last Answer : (D) None of these

The cooling effect in a cooling tower can be speeded up by (A) Increasing the air velocity and area of exposed wet surface (B) Reducing the barometric pressure (C) Reducing the humidity of the air (D) All (A), (B) and (C)

Description : The cooling effect in a cooling tower can be speeded up by (A) Increasing the air velocity and area of exposed wet surface (B) Reducing the barometric pressure (C) Reducing the humidity of the air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

There is main reason for which the automotive manufacturers are developing and selling HEVs. A. Reduction of Co2 emission. B. Direction of exhaust gas toxic emission. C. Improvement of powertrain dynamics D. All of the above

Description : There is main reason for which the automotive manufacturers are developing and selling HEVs. A. Reduction of Co2 emission. B. Direction of exhaust gas toxic emission. C. Improvement of powertrain dynamics D. All of the above

Last Answer : D. All of the above

Can a cooling tower cool water below the wet bulb temperature of inlet air? (A) Yes (B) No (C) Yes; but height of cooling tower will be prohibitively high (D) Yes; but the air flow rate should be excessively high

Description : Can a cooling tower cool water below the wet bulb temperature of inlet air? (A) Yes (B) No (C) Yes; but height of cooling tower will be prohibitively high (D) Yes; but the air flow rate should be excessively high

Last Answer : (B) No

Circulation of gases in furnace is caused by the (A) Change in volume during a change of temperature (B) Difference in density between hot and cold gases (C) Furnace pressure in conjunction with draft in flues(D) All (A), (B) and (C

Description : Circulation of gases in furnace is caused by the (A) Change in volume during a change of temperature (B) Difference in density between hot and cold gases (C) Furnace pressure in conjunction with draft in flues (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Description : The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel consumption

Which of the following accentuates clinkering troubles on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportion of iron & sulphur (B) Low forced draft & fuel bed temperature (C) Thick firebed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering troubles on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportion of iron & sulphur (B) Low forced draft & fuel bed temperature (C) Thick firebed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Use of pulverised coal in boiler furnace provides (A) High calorific value (B) Better combustion (C) Smokeless burning (D) Less erosion on furnace walls

Description : Use of pulverised coal in boiler furnace provides (A) High calorific value (B) Better combustion (C) Smokeless burning (D) Less erosion on furnace walls

Last Answer : (B) Better combustion

The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal(C) Accelerates the burning rate and economises on fuel combustion(D) All (A), (B) and (C)

Description : The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel combustion (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel combustion

In an ammonia plant, the purge off is essential to (A) Maintain inert gas concentration within a limit (B) Remove excess poisonous gases (C) Maintain H2 : N2 ratio at 3 :1 (D) Remove uncondensed ammonia vapour

Description : In an ammonia plant, the purge off is essential to (A) Maintain inert gas concentration within a limit (B) Remove excess poisonous gases (C) Maintain H2 : N2 ratio at 3 :1 (D) Remove uncondensed ammonia vapour

Last Answer : (C) Maintain H2 : N2 ratio at 3 :1

In natural draft cooling tower the air flow is obtained by___________ a) Difference in air pressure b) difference in air temperature c) Difference in air speed d) none of the above

Description : In natural draft cooling tower the air flow is obtained by___________ a) Difference in air pressure b) difference in air temperature c) Difference in air speed d) none of the above

Last Answer : Difference in air pressure

Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile matter coals are more suitable for making pulverised fuel (C) Regulation of furnace temperature and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Description : Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile ... and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Last Answer : (D) None of these