High aniline point of diesel indicates that, it (A) Is highly aromatic (B) Has a large ignition delay (C) Is highly paraffinic (D) Has a low diesel index

High aniline point of diesel indicates that, it
(A) Is highly aromatic
(B) Has a large ignition delay
(C) Is highly paraffinic
(D) Has a low diesel index
by

1 Answer

Answer :

(C) Is highly paraffinic
by

Related questions

High aniline point of a petrofuel (say diesel) indicates that (A) It is highly aromatic in nature (B) It is highly paraffinic in nature (C) It has a very low diesel index (D) Its ignition quality is very poor

Description : High aniline point of a petrofuel (say diesel) indicates that (A) It is highly aromatic in nature (B) It is highly paraffinic in nature (C) It has a very low diesel index (D) Its ignition quality is very poor

Last Answer : (B) It is highly paraffinic in nature

Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Description : Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Last Answer : (C) Aromatic

Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Aniline point of the diesel is a measure of its __________ content. (A) Aromatic (B) Paraffin (C) Olefin (D) Naphthene

Description : Aniline point of the diesel is a measure of its __________ content. (A) Aromatic (B) Paraffin (C) Olefin (D) Naphthene

Last Answer : (B) Paraffin

. Pick out the wrong statement. (A) Multigrade lubricating oils have high viscosity index (B) Paraffinic oil has very high viscosity index (C) Naphthenic oil has very low viscosity index (D) High viscosity index means a large change in viscosity with change in temperature

Description : . Pick out the wrong statement. (A) Multigrade lubricating oils have high viscosity index (B) Paraffinic oil has very high viscosity index (C) Naphthenic oil has very low viscosity index (D) High viscosity index means a large change in viscosity with change in temperature

Last Answer : (D) High viscosity index means a large change in viscosity with change in temperature

Cetane number of a diesel fuel is the measure of its (A) Ignition delay (B) Smoke point (C) Viscosity (D) Oxidation stability

Description : Cetane number of a diesel fuel is the measure of its (A) Ignition delay (B) Smoke point (C) Viscosity (D) Oxidation stability

Last Answer : (A) Ignition delay

Diesel index is defined as (A) (°API) × (Aniline Point, °F)/100 (B) (°API) × (Aniline Point, °C)/100 (C) (°API) × (100)/Aniline Point, °F (D) (°API) × (100)/Aniline Point, °C

Description : Diesel index is defined as (A) (°API) × (Aniline Point, °F)/100 (B) (°API) × (Aniline Point, °C)/100 (C) (°API) × (100)/Aniline Point, °F (D) (°API) × (100)/Aniline Point, °C

Last Answer : (A) (°API) × (Aniline Point, °F)/100

Diesel index (an alternative index for expressing the quality of diesel) is (A) Determined by using a test engine (B) Not related to aniline point (C) Equal to cetane number plus 3 (D) All (A), (B) & (C)

Description : Diesel index (an alternative index for expressing the quality of diesel) is (A) Determined by using a test engine (B) Not related to aniline point (C) Equal to cetane number plus 3 (D) All (A), (B) & (C)

Last Answer : (C) Equal to cetane number plus 3

Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Description : Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Last Answer : (B) Low viscosity index

Specific gravity of a petroleum product gives an indication of its (A) Degree of refinement (B) Hydrocarbon content type (aromatic or paraffinic) (C) Ease of atomisation (D) Sulphur content

Description : Specific gravity of a petroleum product gives an indication of its (A) Degree of refinement (B) Hydrocarbon content type (aromatic or paraffinic) (C) Ease of atomisation (D) Sulphur content

Last Answer : (B) Hydrocarbon content type (aromatic or paraffinic)

__________ base crude oil is also called asphaltic crude. (A) Paraffinic (B) Naphthenic (C) Mixed (D) Aromatic

Description : __________ base crude oil is also called asphaltic crude. (A) Paraffinic (B) Naphthenic (C) Mixed (D) Aromatic

Last Answer : (B) Naphthenic

The knock in diesel engine occurs due to A. instantaneous and rapid burning of the first part of the charge B. instantaneous auto ignition of the last part of the charge C. delayed burning of the last part of the charge D. reduction of delay period

Description : The knock in diesel engine occurs due to A. instantaneous and rapid burning of the first part of the charge B. instantaneous auto ignition of the last part of the charge C. delayed burning of the last part of the charge D. reduction of delay period

Last Answer : ANSWER : A

In high temperature carbonisation (as compared to low temperature carbonisation) of coal, the (A) Gas yield is less (B) Tar yield is more (C) Ignition temperature of coke produced is less (D) Aromatic content of tar produced is more

Description : In high temperature carbonisation (as compared to low temperature carbonisation) of coal, the (A) Gas yield is less (B) Tar yield is more (C) Ignition temperature of coke produced is less (D) Aromatic content of tar produced is more

Last Answer : (D) Aromatic content of tar produced is more

Illuminating characteristics of kerosene is expressed by its (A) Smoke point (B) Aniline point (C) Luminosity number (D) Aromatic content

Description : Illuminating characteristics of kerosene is expressed by its (A) Smoke point (B) Aniline point (C) Luminosity number (D) Aromatic content

Last Answer : (C) Luminosity number

Pick out the wrong statement. (A) Pensky-Marten apparatus is used for determining flash points above 50°C (B) Characterisation factor of paraffinic crude oil is more than 12 (C) Abel apparatus is used for determining flash points below 50°C (D) An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

Description : Pick out the wrong statement. (A) Pensky-Marten apparatus is used for determining flash points above 50°C (B) Characterisation factor of paraffinic crude oil is more than 12 (C) Abel ... An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

Last Answer : (D) An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

Aniline point of high speed diesel may be about __________ °C. (A) 35 (B) 70 (C) 105 (D) 150

Description : Aniline point of high speed diesel may be about __________ °C. (A) 35 (B) 70 (C) 105 (D) 150

Last Answer : (B) 70

Octane number of gasoline is a measure of its (A) Resistance to knock (B) Ignition delay (C) Ignition temperature (D) Smoke point

Description : Octane number of gasoline is a measure of its (A) Resistance to knock (B) Ignition delay (C) Ignition temperature (D) Smoke point

Last Answer : (A) Resistance to knock

A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point

Description : A multigrade lubricating oil means an oil having high (A) Viscosity index (B) Viscosity (C) Aniline point (D) Flash point

Last Answer : (A) Viscosity index

Aniline point is a property of the (A) Diesel (B) LPG (C) Naphtha (D) Gasoline

Description : Aniline point is a property of the (A) Diesel (B) LPG (C) Naphtha (D) Gasoline

Last Answer : (C) Naphtha

Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature. (A) More than (B) Less than (C) Same as (D) Either more or less; depends on the room temperature

Description : Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature. (A) ... (B) Less than (C) Same as (D) Either more or less; depends on the room temperature

Last Answer : (C) Same as

Aniline point is the temperature at which (A) Equal weight of diesel & the aniline are completely miscible (B) Equal weight of aniline & the test sample are completely miscible (C) Equal volume of aniline & the test sample are completely miscible (D) Aniline vaporises

Description : Aniline point is the temperature at which (A) Equal weight of diesel & the aniline are completely miscible (B) Equal weight of aniline & the test sample are completely miscible (C) Equal volume of aniline & the test sample are completely miscible (D) Aniline vaporises

Last Answer : (C) Equal volume of aniline & the test sample are completely miscible

By higher octane number of SI fuel, it is meant that the fuel has (a) Higher heating value (b) Higher flash point (c) Lower volatility (d) Longer ignition delay

Description : By higher octane number of SI fuel, it is meant that the fuel has (a) Higher heating value (b) Higher flash point (c) Lower volatility (d) Longer ignition delay

Last Answer : Ans : d

The probability of knocking in diesel engines is increased by a. High self-ignition temperature. b. Low volatility. c. High viscosity. d. all of the above

Description : The probability of knocking in diesel engines is increased by a. High self-ignition temperature. b. Low volatility. c. High viscosity. d. all of the above

Last Answer : ANSWER d. all of the above

The probability of knocking in diesel engines is increased by a. High self-ignition temperature. b. Low volatility. c. High viscosity. d. All of the above

Description : The probability of knocking in diesel engines is increased by a. High self-ignition temperature. b. Low volatility. c. High viscosity. d. All of the above

Last Answer : ANSWER d. all of the above

Which of the following statements is false about aniline? (a) It is a primary aromatic amine. (b) It is a weak base which forms salts with acids. (c) It liberates nitrogen on treatment with ice-cold nitrous acid. (d) It can be prepared by the reduction of nitrobenzene with tin and HCl

Description : Which of the following statements is false about aniline? (a) It is a primary aromatic amine. (b) It is a weak base which forms salts with acids. (c) It liberates nitrogen on treatment with ice-cold nitrous acid. (d) It can be prepared by the reduction of nitrobenzene with tin and HCl

Last Answer : It liberates nitrogen on treatment with ice-cold nitrous acid

iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above

Description : iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above

Last Answer : ∙ Torque is a function of thermal efficiency

gnition delay is defined as the A)time between start of fuel injection and ignition of fuel B)time between end of fuel injection and ignition of fuel C)time between start of ignition and tdc D)time between completion of ignition and bdc

Description : gnition delay is defined as the A)time between start of fuel injection and ignition of fuel B)time between end of fuel injection and ignition of fuel C)time between start of ignition and tdc D)time between completion of ignition and bdc

Last Answer : A)time between start of fuel injection and ignition of fuel

Most high speed compression ignition engine operate on A. dual cycle B. otto cycle C. diesel cycle D.Carnot cycle

Description : Most high speed compression ignition engine operate on A. dual cycle B. otto cycle C. diesel cycle D.Carnot cycle

Last Answer : ANSWER : A

Spark plug is provided in a/an (A) Engine having carburettor (B) Diesel engine (C) Compression ignition engine (D) Both (B) & (C)

Description : Spark plug is provided in a/an (A) Engine having carburettor (B) Diesel engine (C) Compression ignition engine (D) Both (B) & (C)

Last Answer : (A) Engine having carburettor

A coal containing high amount of volatile matter will have (A) Low ignition temperature (B) Very little ash content (C) High fusion point of its ash (D) Low adiabatic flame temperature

Description : A coal containing high amount of volatile matter will have (A) Low ignition temperature (B) Very little ash content (C) High fusion point of its ash (D) Low adiabatic flame temperature

Last Answer : (A) Low ignition temperature

The boiling point of normal paraffinic (pron: pair-ah-FIN-ik) hydrocarbons increases with the number of carbon atoms per molecule. What is the smallest number of carbon atoms a normal paraffinic hydrocarbon can have and still be a liquid at room temperature (70-75 degrees Fahrenheit) and 1 atmosphere pressure.

Description : The boiling point of normal paraffinic (pron: pair-ah-FIN-ik) hydrocarbons increases with the number of carbon atoms per molecule. What is the smallest number of carbon atoms a normal paraffinic ... and still be a liquid at room temperature (70-75 degrees Fahrenheit) and 1 atmosphere pressure.

Last Answer : ANSWER: FIVE

A coal having higher volatile matter content will necessarily have lower (A) Ash fusion temperature (B) Calorific value (C) Ignition temperature (D) Caking index

Description : A coal having higher volatile matter content will necessarily have lower (A) Ash fusion temperature (B) Calorific value (C) Ignition temperature (D) Caking index

Last Answer : (C) Ignition temperature

What causes ignition to occur in a diesel engine?

Description : What causes ignition to occur in a diesel engine?

Last Answer : When the piston compresses the fuel-air mixture, the spark ignites it, causing combustion

A fuel of cetane number 40 has the same ignition quality as a mixture of a) 40% cetane and 60% alpha methyl naphthalene b) 40% alpha methyl naphthalene and 60% cetane c) 40% petrol and 60% diesel d) 40% diesel and 60% petrol

Description : A fuel of cetane number 40 has the same ignition quality as a mixture of a) 40% cetane and 60% alpha methyl naphthalene b) 40% alpha methyl naphthalene and 60% cetane c) 40% petrol and 60% diesel d) 40% diesel and 60% petrol

Last Answer : Answer: a Explanation: A fuel of cetane number 40 has the same ignition quality as a mixture of 40% cetane and 60% alpha methyl naphthalene as cetane number is counted on cetane percentage.

Ignition quality of diesel is expressed by a. octane number b. cetane number c. calorific value d. carbon content

Description : Ignition quality of diesel is expressed by a. octane number b. cetane number c. calorific value d. carbon content

Last Answer : ANSWER b. cetane number

The self-ignition temperature of diesel oil compared to petrol is a. higher b. lower c. same d. depends on the quality of fuel

Description : The self-ignition temperature of diesel oil compared to petrol is a. higher b. lower c. same d. depends on the quality of fuel

Last Answer : ANSWER a. higher

A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel cycle is higher than the Otto cycle, at a fixed compression ratio c. The compression ratio of a diesel engine is higher than that of an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

Description : A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel ... an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

Last Answer : ANSWER c. The compression ratio of a diesel engine is higher than that of an S.I engine

The self-ignition temperature of diesel as compared to petrol is a. higher b. lower c. same d. varies

Description : The self-ignition temperature of diesel as compared to petrol is a. higher b. lower c. same d. varies

Last Answer : ANSWER a. higher

Which of the following cycle is used for Compression Ignition engine? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Description : Which of the following cycle is used for Compression Ignition engine? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer b. Diesel cycle

Which of the following cycle is used for Spark Ignition engine? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Description : Which of the following cycle is used for Spark Ignition engine? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer a. Otto cycle

Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size

Description : Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size 

Last Answer : Comparison between detonation and diesel knock: Parameter To avoid Detonation in SI Engine  To avoid Diesel knock i) Fuel Ignition Temperature High Low ii) Compression Ratio ... Cylinder wall temperature Low High viii) Cylinder size Small Large

A bar chart is commonly used because (a) It is simple to draw and easy to understand (b) It indicates at a glance the overall progress of the project (c) It shows critical and non-critical activities (d) It incorporates uncertainties for delay in estimation of time required for completion of activities.

Description : A bar chart is commonly used because (a) It is simple to draw and easy to understand (b) It indicates at a glance the overall progress of the project (c) It shows critical ... critical activities (d) It incorporates uncertainties for delay in estimation of time required for completion of activities.

Last Answer : (a) It is simple to draw and easy to understand

The characterisation factor of a crude oil is calculated as 12.5. It meansthat; it is(A) Paraffinic(B) Naphthenic(C) Intermediate(D) None of these

Description : The characterisation factor of a crude oil is calculated as 12.5. It meansthat; it is (A) Paraffinic (B) Naphthenic (C) Intermediate (D) None of these

Last Answer : (A) Paraffinic

Crude oil produced by Indian oil fields are predominantly __________ in nature. (A) Paraffinic (B) Naphthenic (C) Asphaltic (D) Mixed base

Description : Crude oil produced by Indian oil fields are predominantly __________ in nature. (A) Paraffinic (B) Naphthenic (C) Asphaltic (D) Mixed base

Last Answer : (C) Asphaltic

Highest quality bitumen is produced from the __________ crude oil. (A) Paraffinic (B) Naphthenic (C) Intermediate (D) Mixed

Description : Highest quality bitumen is produced from the __________ crude oil. (A) Paraffinic (B) Naphthenic (C) Intermediate (D) Mixed

Last Answer : (B) Naphthenic

Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel oils is higher than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins

Description : Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel ... than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins

Last Answer : (C) Light paraffinic fuel oils is higher than that of equivalent olefins

A few drops of sap were collected by cutting across a plant stem by a suitable method. The sap was tested chemically. Which one of the following test results indicates that it is phloem sap? (a) Acidic (b) Alkaline (c) Low refractive index (d) Absence of sugar

Description : A few drops of sap were collected by cutting across a plant stem by a suitable method. The sap was tested chemically. Which one of the following test results indicates that it is phloem sap? (a) Acidic (b) Alkaline (c) Low refractive index (d) Absence of sugar

Last Answer : (b) Alkaline

Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct process of by-product recovery (C) A high swelling index number of coking coal indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Description : Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct ... indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Last Answer : (C) A high swelling index number of coking coal indicates poor caking properties of coal

High value of BOD (Biochemical Oxygen Demand) indicates that (a) water is less polluted (b) consumption of organic matter in the water is higher by the microbes (c) water is pure (d) water is highly polluted.

Description : High value of BOD (Biochemical Oxygen Demand)  indicates that (a) water is less polluted (b) consumption of organic matter in the water is  higher by the microbes  (c) water is pure (d) water is highly polluted.

Last Answer : (b) consumption of organic matter in the water is 

High value of BOD (Biochemical Oxygen Demand) indicates that (a) water is less polluted (b) consumption of organic matter in the water is higher by the microbes (c) water is pure (d) water is highly polluted.

Description : High value of BOD (Biochemical Oxygen Demand) indicates that (a) water is less polluted (b) consumption of organic matter in the water is higher by the microbes (c) water is pure (d) water is highly polluted.

Last Answer : (b) consumption of organic matter in the water is higher by the microbes