Thermoplastic resins are those polymers, which (A) Has decreased plasticity at increasing temperature (B) Cannot be moulded (C) Easily deform under pressure at high temperature (D) None of these

Thermoplastic resins are those polymers, which
(A) Has decreased plasticity at increasing temperature
(B) Cannot be moulded
(C) Easily deform under pressure at high temperature
(D) None of these
by

1 Answer

Answer :

(C) Easily deform under pressure at high temperature
by

Related questions

Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Last Answer : (B) More brittle

Thermosetting resins are those polymers, which (A) Do not increase in plasticity with rise in temperature (B) Allow slip to occur between molecules (C) Do not take on a permanent set (D) None of theseThermosetting resins are those polymers, which(A) Do not increase in plasticity with rise in temperature(B) Allow slip to occur between molecules(C) Do not take on a permanent set(D) None of these

Description : Thermosetting resins are those polymers, which (A) Do not increase in plasticity with rise in temperature (B) Allow slip to occur between molecules (C) Do not take on a permanent set (D) None of these

Last Answer : (A) Do not increase in plasticity with rise in temperature

Thermoplastic resins usually(A) Remain hard as long as they are hot(B) Cannot be reclaimed from waste(C) Permanent setting resins(D) Less brittle than thermosetting resins

Description : Thermoplastic resins usually (A) Remain hard as long as they are hot (B) Cannot be reclaimed from waste (C) Permanent setting resins (D) Less brittle than thermosetting resins

Last Answer : (D) Less brittle than thermosetting resins

Thermosetting polymers are (A) Injection moulded (B) Cast molded (C) Extruded (D) None of these

Description : Thermosetting polymers are (A) Injection moulded (B) Cast molded (C) Extruded (D) None of these

Last Answer : (B) Cast molded

The ability of the material to deform without breaking is called (a) Elasticity (b) Plasticity (c) Creep (d) None of these

Description : The ability of the material to deform without breaking is called (a) Elasticity (b) Plasticity (c) Creep (d) None of these

Last Answer : (b) Plasticity

Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Description : Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Last Answer : Option D

Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Description : Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Last Answer : (B) Thermoplastic

While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Description : While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Last Answer : A) Low impact strength

A chain growth polymerisation reaction consists of three different types of reaction namely initiation reaction, propagation reaction & termination reaction. Chain growth polymerisation reaction is not involved in the manufacture of (A) Siloxane elastomers (B) Polyamides (C) Vinyl polymers (D) Urea-formaldehyde resins

Description : A chain growth polymerisation reaction consists of three different types of reaction namely initiation reaction, propagation reaction & termination reaction. Chain growth polymerisation reaction is not involved ... Siloxane elastomers (B) Polyamides (C) Vinyl polymers (D) Urea-formaldehyde resins

Last Answer : (D) Urea-formaldehyde resins

Which of the following polymers belong to the class of formaldehyde resin? (A) Melamine resins (B) Teflon (C) Dacron (D) None of these

Description : Which of the following polymers belong to the class of formaldehyde resin? (A) Melamine resins (B) Teflon (C) Dacron (D) None of these

Last Answer : (A) Melamine resins

Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Description : Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Last Answer : (B) Thermosetting

Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Description : Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst

Last Answer : (C) Produces epoxy polymers

Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Last Answer : (B) Magnitude of intermolecular forces

Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Description : Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Last Answer : (A) Polymeric fibres are never produced by addition polymerisation

Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Description : Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Last Answer : (B) Have three dimensional structure

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Description : Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Last Answer : (C) Elastometric

Distinguish between thermoplastic and thermo setting polymers.

Description : Distinguish between thermoplastic and thermo setting polymers.

Last Answer : Thermo plastic polymer Thermo setting plastic  1. The inter moliculer forces are intermediate.  1. The inter molecular force are ... 3. Eg. Polythene and polystyrene  3. Eg. Bakelite

Differentiate between Thermoplastic and Thermosetting polymers.

Description : Differentiate between Thermoplastic and Thermosetting polymers.

Last Answer : Differentiate between Thermosetting and Thermoplastic polymers: Thermosetting Thermoplastic Polymers which once mould /shaped do not soften when heated and thus cannot be reshaped  Polymers whose ... tri, tetra or poly functional. Monomer used in this polymer bi functional.

Flat footed camels can walk easily in sandy deserts because - (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing the area of the surface in contact (3) pressure on the sand is decreased by decreasing the area of the surface in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Description : Flat footed camels can walk easily in sandy deserts because - (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by ... in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Last Answer : (1) pressure on the sand is decreased by increasing the area of the surface in contact Explanation: Camels have broad, flat, leathery pads with two toes on each foot. When the camel places its foot on ... the animal on loose sand in much the same way that a snowshoe helps a person walk on snow.

Flat footed camels can walk easily in sandy deserts because (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing the area of the surface in contact (3) pressure on the sand is decreased by decreasing the area of the surface in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Description : Flat footed camels can walk easily in sandy deserts because (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing ... in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Last Answer : pressure on the sand is decreased by increasing the area of the surface in contact

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

The thermosetting plastic (A) Becomes rigid when moulded at suitable pressure and temperature (B) At 127°C to 177°C permanently set and further application of heat does not soften it (C) Chars at 343°C (D) All the above

Description : The thermosetting plastic (A) Becomes rigid when moulded at suitable pressure and temperature (B) At 127°C to 177°C permanently set and further application of heat does not soften it (C) Chars at 343°C (D) All the above

Last Answer : Answer: Option D

Silicone resins, which are highly water repellent and has good heat resistance cannot be used (A) As room temperature adhesive (B) As grease & lubricant

Description : Silicone resins, which are highly water repellent and has good heat resistance cannot be used (A) As room temperature adhesive (B) As grease & lubricant

Last Answer : (A) As room temperature adhesive

All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Description : All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Last Answer : (C) Buckets

__________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Description : __________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Last Answer : (C) Injection

Polyvinyl acetate is never used for making (A) Moulded articles (B) Fibres (C) Adhesives

Description : Polyvinyl acetate is never used for making (A) Moulded articles (B) Fibres (C) Adhesives

Last Answer : (A) Moulded articles

Addition of plasticisers to polymers results in partial neutralisation of intermolecular forces of attraction between the macro-molecules thereby increasing its (A) Tensile strength (B) Chemical resistance (C) Flexibility (D) All (A), (B) & (C)

Description : Addition of plasticisers to polymers results in partial neutralisation of intermolecular forces of attraction between the macro-molecules thereby increasing its (A) Tensile strength (B) Chemical resistance (C) Flexibility (D) All (A), (B) & (C)

Last Answer : (C) Flexibility

Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Description : Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Last Answer : (A) Decreased capacity

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Description : During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on ... be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Last Answer : (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced)

The truss element can deform only in the a.vertical direction b.horizontal direction c.inclined direction d.axial direction

Description : The truss element can deform only in the a.vertical direction b.horizontal direction c.inclined direction d.axial direction

Last Answer : d.axial direction

The fire shows - my kin, born. The fire grows - my kin, adorn. The fire slows - my kin, deform. The fire goes - my kin, mourn. -Riddles

Description : The fire shows - my kin, born. The fire grows - my kin, adorn. The fire slows - my kin, deform. The fire goes - my kin, mourn. -Riddles

Last Answer : Fruit-bearing tree through the four seasons.

A sulphate salt of group 2 element of the periodic table is white ,soft substance which can be moulded into different shapes by making its dough.Identify the salt . (a) CaSO4.1/2 H2O (b) CaSO4.2H2O (c) 2CaSO4. 1⁄2 H2O (d)CaSO4

Description : A sulphate salt of group 2 element of the periodic table is white ,soft substance which can be moulded into different shapes by making its dough.Identify the salt . (a) CaSO4.1/2 H2O (b) CaSO4.2H2O (c) 2CaSO4. 1⁄2 H2O (d)CaSO4

Last Answer : (a) CaSO4.1/2 H2O

Strain energy of any member may be defined as work done on it (A) To deform it (B) To resist elongation (C) To resist shortening (D) All the above

Description : Strain energy of any member may be defined as work done on it  (A) To deform it  (B) To resist elongation  (C) To resist shortening  (D) All the above 

Last Answer : (D) All the above 

Pick up the correct statement from the following: (A) The average crushing strength of hand moulded bricks is 6000 t/m2 (B) The average tensile strength of hand moulded brick is 200 t/m2 (C) The average shearing strength of hand moulded brick is 600 t/m2 (D) All the above

Description : Pick up the correct statement from the following: (A) The average crushing strength of hand moulded bricks is 6000 t/m2 (B) The average tensile strength of hand moulded brick is 200 t/m2 (C) The average shearing strength of hand moulded brick is 600 t/m2 (D) All the above

Last Answer : Answer: Option D

Ornamental moulded course placed on the top of a wall, is (A) Cornice (B) Coping (C) Frieze (D) Lintel

Description : Ornamental moulded course placed on the top of a wall, is (A) Cornice (B) Coping (C) Frieze (D) Lintel

Last Answer : Answer: Option A

What area of car is designed to deform in a collision ? a) Crumple zone b) Interior zone c) Doors d) Rear end

Description : What area of car is designed to deform in a collision ? a) Crumple zone b) Interior zone c) Doors d) Rear end

Last Answer : a) Crumple zone

What area of car is designed to deform in a collision? a) The crumple zone b) The interior c) The doors d) The rear end

Description : What area of car is designed to deform in a collision? a) The crumple zone b) The interior c) The doors d) The rear end

Last Answer : a) The crumple zone

Arrange the following Polymers in increasing order of inter molecular forces Nylon 6, Neoprene and PVC

Description : Arrange the following Polymers in increasing order of inter molecular forces Nylon 6, Neoprene and PVC

Last Answer : Ans : Nylon 6, PVC and. Neop 

Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Description : Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Last Answer : Ans: (a) Buna-S, Polythene and Nylon 66.  (b) Neoprene, PVC and Nylon 6.

Plexiglass (also called Lucite) because of its high optical transparency is used for making lenses. It is chemically (A) Polymethyl methacrylate (PMMA) (B) Polytetrafluroethylene (PTFE) (C) Polycarbonates (D) Phenolic resins

Description : Plexiglass (also called Lucite) because of its high optical transparency is used for making lenses. It is chemically (A) Polymethyl methacrylate (PMMA) (B) Polytetrafluroethylene (PTFE) (C) Polycarbonates (D) Phenolic resins

Last Answer : (A) Polymethyl methacrylate (PMMA)

Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Description : Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Last Answer : (A) Ethylene glycol

Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low (B) Very high pressure is required resulting in costly pressure vessel (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Description : Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low ... (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Last Answer : (A) Rate of reaction is very low

The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion of the resin. C. Produces porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Description : The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion ... porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Last Answer : B. Produces porosity on the internal portion of the resin.

The material which can be deformed permanently by heat and pressure is called a (1) thermoset (2) thermoplastic (3) chemical compound (4) polymer

Description : The material which can be deformed permanently by heat and pressure is called a (1) thermoset (2) thermoplastic (3) chemical compound (4) polymer

Last Answer : (1) thermoset Explanation: A thermosetting polymer, resin, or plastic, often called a thermoset, is a polymer that is irreversibly hardened by curing from a soft solid or viscous liquid prepolymer or resin.

The material which can be deformed permanently by heat and pressure is called a: (1) Thermoplastic (2) Thermoset (3) Chemical compound (4) Polymer

Description : The material which can be deformed permanently by heat and pressure is called a: (1) Thermoplastic (2) Thermoset (3) Chemical compound (4) Polymer

Last Answer : (2) Thermoset Explanation: Thermoset materials are those materials that are made by polymers joined together by chemical bonds, acquiring a highly cross linked polymer structure. They cannot melt.

Tower diameter may be decreased by (A) Using higher reflux ratio (B) Use of increased tray spacing (C) Increasing the liquid flow rate (D) Increasing the vapour flow rate

Description : Tower diameter may be decreased by (A) Using higher reflux ratio (B) Use of increased tray spacing (C) Increasing the liquid flow rate (D) Increasing the vapour flow rate

Last Answer : (B) Use of increased tray spacing

Choose the correct statement about inflammable substance from the following. They have a) low ignition temperature and cannot catch fire easily. b) high ignition temperature and can catch fire easily . c) low ignition temperature and can catch fire easily d) high ignition temperature and cannot catch fire easily

Description : Choose the correct statement about inflammable substance from the following. They have a) low ignition temperature and cannot catch fire easily. b) high ignition temperature and can catch fire easily ... temperature and can catch fire easily d) high ignition temperature and cannot catch fire easily

Last Answer : c) low ignition temperature and can catch fire easily