What is that which, supposing it's greatest breadth to be four inches, length nine inches, and depth three inches and contains a solid foot? -Riddles

What is that which, supposing it's greatest breadth to be four inches, length nine inches, and depth three inches and contains a solid foot? -Riddles
by

1 Answer

Answer :

A shoe.
by

Related questions

River erosion is at its greatest where river's – (1) depth is more (2) breadth is more (3) flow is fast (4) gradient is more

Description : River erosion is at its greatest where river's – (1) depth is more (2) breadth is more (3) flow is fast (4) gradient is more

Last Answer : (3) flow is fast Explanation: The outer bank (called a cut bank) has the greatest erosion because the water is flowing faster along the outer bank than the inner bank. The slower water allows sediment to be deposited (called a point bar).

The capacity of a cuboidal tank is 50000 litres of water. Find the breadth of the tank, if its length and depth are respectively 2.5 m and 10 m -Maths 9th

Description : The capacity of a cuboidal tank is 50000 litres of water. Find the breadth of the tank, if its length and depth are respectively 2.5 m and 10 m -Maths 9th

Last Answer : Length (l) and depth (h) of tank is 2.5 m and 10 m respectively. To find: The value of breadth, say b. Formula to find the volume of a tank = l b h = (2.5 b 10) m3= 25b m3 Capacity ... of water (Given) Therefore, 25000 b = 50000 This implies, b = 2 Therefore, the breadth of the tank is 2 m.

A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated load W at its mid-span. The same bar experiences an extension e under same tensile load. The ratio of the maximum deflection to the elongation, is (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Description : A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated  load W at its mid-span. The same bar experiences an extension e under same tensile load. The  ratio of the maximum deflection to the ... (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Last Answer : (C) (L/2d)

A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same length and depth as the other bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Description : A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same ... bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Last Answer : Answer: Option C

If L, B and D length, breadth and depth of water in a rectangular sedimentation tank of total discharge Q, the settling velocity, is (A) Q/H(B) Q/D(C) Q/(D × B) (D) Q/(L × B)

Description : If L, B and D length, breadth and depth of water in a rectangular sedimentation tank of total  discharge Q, the settling velocity, is  (A) Q/H (B) Q/D (C) Q/(D × B)  (D) Q/(L × B) 

Last Answer : (D) Q/(L × B) 

The portion of the slab which acts monolithically with the beam and which resists the compressive stresses, is called _________of flange of the T-beam (a) Length (b) Breadth (c) Thickness (d) Depth

Description : The portion of the slab which acts monolithically with the beam and which resists the compressive stresses, is called _________of flange of the T-beam (a) Length (b) Breadth (c) Thickness (d) Depth

Last Answer : (b) Breadth

A butcher is 6 foot and 11 inches tall. He works at 'Meat for All'. What does he weigh? -Riddles

Description : A butcher is 6 foot and 11 inches tall. He works at 'Meat for All'. What does he weigh? -Riddles

Last Answer : He weighs meat.

For a ribbed slab (A) Clear spacing between ribs shall not be greater than 4.5 cm (B) Width of the rib shall not be less than 7.5 cm (C) Overall depth of the slab shall not exceed four times the breadth of the rib (D) All the above

Description : For a ribbed slab (A) Clear spacing between ribs shall not be greater than 4.5 cm (B) Width of the rib shall not be less than 7.5 cm (C) Overall depth of the slab shall not exceed four times the breadth of the rib (D) All the above

Last Answer : Answer: Option D

My last five letters refer to a raised line on the surface of something; my whole refer to a thin tube containing ink inside a pen. My first three & four letters both refer to vehicles. I am a word of nine letters. What Word am I? -Riddles

Description : My last five letters refer to a raised line on the surface of something; my whole refer to a thin tube containing ink inside a pen. My first three & four letters both refer to vehicles. I am a word of nine letters. What Word am I? -Riddles

Last Answer : A Cartridge.

An urn contains nine balls, of which three are red, four are blue and two are green. -Maths 9th

Description : An urn contains nine balls, of which three are red, four are blue and two are green. -Maths 9th

Last Answer : (b) \(rac{2}{7}\)Let S be the sample space having 9 balls (3R + 4B + 2G) Then n(S) = Total number of ways in which 3 balls can be drawn out of the 9 balls= \(rac{9 imes8 imes7}{3 imes2}\) = 84Let A : Event of drawing three ... 2 = 24.∴ P(A) = \(rac{n(A)}{n(S)}\) = \(rac{24}{84}\) = \(rac{2}{7}\).

There is a door, on the side of the door that you are on, there is a skeletal army ready to trample you underneath their feet, on the other side is a city with a wall that will keep you safe. You need to get in the door but there is some sort of code to get into safety; one man goes to the door, and the doorkeeper says 'eight' and the man says 'five' he lets him in. The second man goes up to the door and the doorkeeper says 'nine' and the second man says 'four', and he lets him in. Finally, it's your turn, you only get one chance to guess. The doorkeeper says 'twenty one'. What do you say to get to safety? -Riddles

Description : There is a door, on the side of the door that you are on, there is a skeletal army ready to trample you underneath their feet, on the other side is a city with a wall that will keep you safe. ... get one chance to guess. The doorkeeper says 'twenty one'. What do you say to get to safety? -Riddles

Last Answer : You would say 'nine' as, 21 is nine letters long. It's quite simple actually. Eight is five letters long hence 'five' and nine is four letters long hence the word 'four'.

You are a bus driver. Two kids get on and one kid gets off. Five kids get on and four get off. Nine kids get on another one gets off.What color are the bus drivers eyes? -Riddles

Description : You are a bus driver. Two kids get on and one kid gets off. Five kids get on and four get off. Nine kids get on another one gets off.What color are the bus drivers eyes? -Riddles

Last Answer : If your eyes are green, the answer is green. If your eyes are brown, the answer is brown etc.

Draw four rectangles on a piece of paper. Put nine x's in the four rectangles so that there is an uneven number of x's in each rectangle. -Riddles

Description : Draw four rectangles on a piece of paper. Put nine x's in the four rectangles so that there is an uneven number of x's in each rectangle. -Riddles

Last Answer : Draw one large rectangle. Then draw the three smaller rectangles within the large rectangle. Place three x's in each small rectangle. There will be nine x's in the large rectangle.

A cuboid shaped wooden block has 6 cm length, 4 cm breadth and 1 cm height. 17. Two faces measuring 4 cm x 1 cm are coloured in black. 18. Two faces measuring 6 cm x 1 cm are coloured in red. 19. Two faces measuring 6 cm x 4 cm are coloured in green. 20. The block is divided into 6 equal cubes of side 1 cm (from 6 cm side), 4 equal cubes of side 1 cm(from 4 cm side). How many cubes will have green colour on two sides and rest of the four sides having no colour ? (a)12 (b)10 (c)8 (d)4

Description : A cuboid shaped wooden block has 6 cm length, 4 cm breadth and 1 cm height. 17. Two faces measuring 4 cm x 1 cm are coloured in black. 18. Two faces measuring 6 cm x 1 cm are coloured in red. 19. Two faces ... colour on two sides and rest of the four sides having no colour ? (a)12 (b)10 (c)8 (d)4

Last Answer : Answer key : (c)

The discharge through a channel of rectangular section will be maximum, if (A) Its depth is twice the breadth (B) Its breadth is twice the depth (C) Its depth is thrice the breadth (D) Its breadth is thrice the depth

Description : The discharge through a channel of rectangular section will be maximum, if (A) Its depth is twice the breadth (B) Its breadth is twice the depth (C) Its depth is thrice the breadth (D) Its breadth is thrice the depth

Last Answer : Answer: Option B

A man ordered a length of rope by telephone from his nearest hardware shop. But when he went to collect the rope, he found that the assistant had miswritten the order by interchanging feet and inches. As a result of this, the rope was only 30 percent of the length that the man wanted. What length did he want and what length did he get? -Riddles

Description : A man ordered a length of rope by telephone from his nearest hardware shop. But when he went to collect the rope, he found that the assistant had miswritten the order by interchanging feet and inches. As ... the length that the man wanted. What length did he want and what length did he get? -Riddles

Last Answer : The man ordered 9 feet 2 inches of rope, and got 2 feet 9 inches.

Is it better to go for depth or breadth in your studies?

Description : Is it better to go for depth or breadth in your studies?

Last Answer : Depends what you want to do. Or more specifically, if you know what you want to do. For example, if you're going to become a software engineer (like me), not a person on the planet having ... to change careers at some point, get yourself at least familiar with as many interesting topics as you can.

Which algorithm is used for solving temporal probabilistic reasoning? a) Hill-climbing search b) Hidden markov model c) Depth-first search d) Breadth-first search

Description : Which algorithm is used for solving temporal probabilistic reasoning? a) Hill-climbing search b) Hidden markov model c) Depth-first search d) Breadth-first search

Last Answer : b) Hidden markov model

Which of the following search belongs to totally ordered plan search? a) Forward state-space search b) Hill-climbing search c) Depth-first search d) Breadth-first search

Description : Which of the following search belongs to totally ordered plan search? a) Forward state-space search b) Hill-climbing search c) Depth-first search d) Breadth-first search

Last Answer : a) Forward state-space search

Which algorithm are in more similar to backward chaining algorithm? a) Depth-first search algorithm b) Breadth-first search algorithm c) Hill-climbing search algorithm d) All of the mentioned

Description : Which algorithm are in more similar to backward chaining algorithm? a) Depth-first search algorithm b) Breadth-first search algorithm c) Hill-climbing search algorithm d) All of the mentioned

Last Answer : a) Depth-first search algorithm

Which search is similar to minimax search? a) Hill-climbing search b) Depth-first search c) Breadth-first search d) All of the mentioned

Description : Which search is similar to minimax search? a) Hill-climbing search b) Depth-first search c) Breadth-first search d) All of the mentioned

Last Answer : b) Depth-first search

Which search is equal to minimax search but eliminates the branches that can’t influence the final decision? a) Depth-first search b) Breadth-first search c) Alpha-beta pruning d) None of the mentioned

Description : Which search is equal to minimax search but eliminates the branches that can’t influence the final decision? a) Depth-first search b) Breadth-first search c) Alpha-beta pruning d) None of the mentioned

Last Answer : c) Alpha-beta pruning

Which of the following algorithm is generally used CSP search algorithm? a) Breadth-first search algorithm b) Depth-first search algorithm c) Hill-climbing search algorithm d) None of the mentioned

Description : Which of the following algorithm is generally used CSP search algorithm? a) Breadth-first search algorithm b) Depth-first search algorithm c) Hill-climbing search algorithm d) None of the mentioned

Last Answer : b) Depth-first search algorithm

A* algorithm is based on ___________ a) Breadth-First-Search b) Depth-First –Search c) Best-First-Search d) Hill climbing

Description : A* algorithm is based on ___________ a) Breadth-First-Search b) Depth-First –Search c) Best-First-Search d) Hill climbing

Last Answer : c) Best-First-Search

Which search uses the problem specific knowledge beyond the definition of the problem? a) Informed search b) Depth-first search c) Breadth-first search d) Uninformed search

Description : Which search uses the problem specific knowledge beyond the definition of the problem? a) Informed search b) Depth-first search c) Breadth-first search d) Uninformed search

Last Answer : a) Informed search

Which of the following is/are Uninformed Search technique/techniques? a) Breadth First Search (BFS) b) Depth First Search (DFS) c) Bidirectional Search d) All of the mentioned

Description : Which of the following is/are Uninformed Search technique/techniques? a) Breadth First Search (BFS) b) Depth First Search (DFS) c) Bidirectional Search d) All of the mentioned

Last Answer : d) All of the mentioned

Which search implements stack operation for searching the states? a) Depth-limited search b) Depth-first search c) Breadth-first search d) None of the mentioned

Description : Which search implements stack operation for searching the states? a) Depth-limited search b) Depth-first search c) Breadth-first search d) None of the mentioned

Last Answer : b) Depth-first search

Which search is implemented with an empty first-in-first-out queue? a) Depth-first search b) Breadth-first search c) Bidirectional search d) None of the mentioned

Description : Which search is implemented with an empty first-in-first-out queue? a) Depth-first search b) Breadth-first search c) Bidirectional search d) None of the mentioned

Last Answer : b) Breadth-first search

Which search method takes less memory? a) Depth-First Search b) Breadth-First search c) Linear Search d) Optimal search

Description : Which search method takes less memory? a) Depth-First Search b) Breadth-First search c) Linear Search d) Optimal search

Last Answer : a) Depth-First Search

Which search agent operates by interleaving computation and action? a) Offline search b) Online search c) Breadth-first search d) Depth-first search

Description : Which search agent operates by interleaving computation and action? a) Offline search b) Online search c) Breadth-first search d) Depth-first search

Last Answer : b) Online search

Which search method takes less memory? a) Depth-First Search b) Breadth-First search c) Optimal search d) Linear Search

Description : Which search method takes less memory? a) Depth-First Search b) Breadth-First search c) Optimal search d) Linear Search

Last Answer : a) Depth-First Search

A* algorithm is based on which of the following concept? A : Best-First-Search B : Breadth-First-Search C : Depth-First –Search D : Hill climbing

Description : A* algorithm is based on which of the following concept? A : Best-First-Search B : Breadth-First-Search C : Depth-First –Search D : Hill climbing

Last Answer : A : Best-First-Search

The ratio of the breadth to effective depth of a beam is kept (A) 0.25 (B) 0.50 (C) 0.70 (D) 0.75

Description : The ratio of the breadth to effective depth of a beam is kept (A) 0.25 (B) 0.50 (C) 0.70 (D) 0.75

Last Answer : Answer: Option B

A singly reinforced beam has breadth b, effective depth d, depth of neutral axis n and critical neutral axis n1. If fc and ft are permissible compressive and tensile stresses, the moment to resistance of the beam, is (A) bn (fc /2) (d - n/3) (B) Atft (d - n/3) (C) ½ n1 (1 - n1/3) cbd² (D) All the above

Description : A singly reinforced beam has breadth b, effective depth d, depth of neutral axis n and critical neutral axis n1. If fc and ft are permissible compressive and tensile stresses, the moment to resistance of the beam, is (A) bn (fc ... (B) Atft (d - n/3) (C) ½ n1 (1 - n1/3) cbd² (D) All the above

Last Answer : Answer: Option D

The most economical section of a trapezoidal channel is one which has hydraulic mean depth equal to (A) 1/2 × depth (B) 1/2 × breadth (C) 1/2 × sloping side (D) 1/4 × (depth + breadth)

Description : The most economical section of a trapezoidal channel is one which has hydraulic mean depth equal to (A) 1/2 × depth (B) 1/2 × breadth (C) 1/2 × sloping side (D) 1/4 × (depth + breadth)

Last Answer : Answer: Option A

The most economical section of a rectangular channel is one which has hydraulic mean depth or hydraulic radius equal to (A) Half the depth (B) Half the breadth (C) Twice the depth (D) Twice the breadth

Description : The most economical section of a rectangular channel is one which has hydraulic mean depth or hydraulic radius equal to (A) Half the depth (B) Half the breadth (C) Twice the depth (D) Twice the breadth

Last Answer : Answer: Option A

In a T-beam, the vertical distance between the bottom of the flange and the centre of the tensile reinforcement is (a) Breadth of flange (b) Thickness of flange (c) Breadth of slab (d) Depth of rib

Description : In a T-beam, the vertical distance between the bottom of the flange and the centre of the tensile reinforcement is (a) Breadth of flange (b) Thickness of flange (c) Breadth of slab (d) Depth of rib

Last Answer : (d) Depth of rib

The breadth of rib in a T-beam should at least be equal to __________the depth of rib (a) One –half (b) One –third (c) One-fourth (d) One –sixth

Description : The breadth of rib in a T-beam should at least be equal to __________the depth of rib (a) One –half (b) One –third (c) One-fourth (d) One –sixth

Last Answer : (b) One –third

The breadth of the flange of a T-beam is (a) 1/3rd of the effective span of the T-beam (b) Twelve times the depth of slab plus breadth of rib. (c) Centre to centre distance between the adjacent beam. (d) Least of (a) , (b) or (c)

Description : The breadth of the flange of a T-beam is (a) 1/3rd of the effective span of the T-beam (b) Twelve times the depth of slab plus breadth of rib. (c) Centre to centre distance between the adjacent beam. (d) Least of (a) , (b) or (c)

Last Answer : (d) Least of (a) , (b) or (c)

In the …………….. traversal we process all of a vertex’s descendents before we move to an adjacent vertex. A) Depth First B) Breadth First C) With First D) Depth Limited

Description : In the …………….. traversal we process all of a vertex’s descendents before we move to an adjacent vertex. A) Depth First B) Breadth First C) With First D) Depth Limited

Last Answer : A) Depth First

Which of the following is NOT a factor used to classify wholesalers? A)Whether the wholesaler is owned by the producer B)Whether the wholesaler takes title to the products it handles C)The range of services offered by the wholesaler D)The price range of the products carried by the wholesaler E)The breadth and depth of the product lines carried by the wholesaler

Description : Which of the following is NOT a factor used to classify wholesalers? A)Whether the wholesaler is owned by the producer B)Whether the wholesaler takes title to the products it handles C)The ... products carried by the wholesaler E)The breadth and depth of the product lines carried by the wholesaler

Last Answer : D)The price range of the products carried by the wholesale

A* algorithm is based on (A) Breadth-First-Search (B) Depth-First –Search (C) Best-First-Search (D) Hill climbing

Description : A* algorithm is based on (A) Breadth-First-Search (B) Depth-First –Search (C) Best-First-Search (D) Hill climbing

Last Answer : (C) Best-First-Search

Which search method takes less memory? (A) Depth-First Search (B) Breadth-First search (C) Both (A) and (B) (D) Linear Search

Description : Which search method takes less memory? (A) Depth-First Search (B) Breadth-First search (C) Both (A) and (B) (D) Linear Search

Last Answer : (A) Depth-First Search

Level order Traversal of a rooted Tree can be done by starting from root and performing: (A) Breadth First Search (B) Depth first search (C) Root search (D) Deep search

Description : Level order Traversal of a rooted Tree can be done by starting from root and performing: (A) Breadth First Search (B) Depth first search (C) Root search (D) Deep search

Last Answer : (A) Breadth First Search

Which of the following statements is false? (A) Optimal binary search tree construction can be performed efficiently using dynamic programming. (B) Breadth-first search cannot be used to find connected components of a graph. (C) Given the prefix and postfix walks of a binary tree, the tree cannot be reconstructed uniquely. (D) Depth-first-search can be used to find the components of a graph. (1) A (2) B (3) C (4) D

Description : Which of the following statements is false? (A) Optimal binary search tree construction can be performed efficiently using dynamic programming. (B) Breadth-first search cannot be used to find connected components of a graph. (C) ... used to find the components of a graph. (1) A (2) B (3) C (4) D 

Last Answer : Answer: 2

he crossed the breadth of the Eastern Hemisphere, visited territories equivalent to about 44 modern countries, and put behind him a total distance of approximately 73000 miles: he was world's greatest traveler of Pre-modern times A. Megasthenes B. Fahien C. Marco Polo D. Ibn-e-Batuta

Description : he crossed the breadth of the Eastern Hemisphere, visited territories equivalent to about 44 modern countries, and put behind him a total distance of approximately 73000 miles: he was world's greatest traveler of Pre-modern times A. Megasthenes B. Fahien C. Marco Polo D. Ibn-e-Batuta

Last Answer : ANSWER: C

he crossed the breadth of the Eastern Hemisphere, visited territories equivalent to about 44 modern countries, and put behind him a total distance of approximately 73000 miles: he was world's greatest traveler of Pre-modern times A. Megasthenes B. Fahien C. Marco Polo D. Ibn-e-Batuta

Description : he crossed the breadth of the Eastern Hemisphere, visited territories equivalent to about 44 modern countries, and put behind him a total distance of approximately 73000 miles: he was world's greatest traveler of Pre-modern times A. Megasthenes B. Fahien C. Marco Polo D. Ibn-e-Batuta

Last Answer : ANSWER: C

he crossed the breadth of the Eastern Hemisphere, visited territories equivalent to about 44 modern countries, and put behind him a total distance of approximately 73000 miles: he was world's greatest traveler of Pre-modern times A. Megasthenes B. Fahien C. Marco Polo D. Ibn-e-Batuta

Description : he crossed the breadth of the Eastern Hemisphere, visited territories equivalent to about 44 modern countries, and put behind him a total distance of approximately 73000 miles: he was world's greatest traveler of Pre-modern times A. Megasthenes B. Fahien C. Marco Polo D. Ibn-e-Batuta

Last Answer : ANSWER: C

Dynamite is a tool that can be used to cut down trees. To cut a tree 18 inches in diameter requires five sticks of dynamite: one on the north, south, east and west sides of the tree, and the fifth stick on the side to which the tree should fall. During construction of a dam, a tree 18 inches in diameter was completely covered by water. Since the treetop was fouling the boat's propellers, it had to be cut down. A diver went down and put a stick of dynamite on the four sides of the tree. Since the current is flowing south at 2 knots per hour, on which side of the tree would you instruct the diver to put the fifth stick of dynamite if you wanted the tree to fall north? -Riddles

Description : Dynamite is a tool that can be used to cut down trees. To cut a tree 18 inches in diameter requires five sticks of dynamite: one on the north, south, east and west sides of the tree, and the ... you instruct the diver to put the fifth stick of dynamite if you wanted the tree to fall north? -Riddles

Last Answer : It doesn't matter where the fifth stick is placed, since the tree won't fall in any direction. Being wood, it will float and rise to the surface.

What has a head, a foot, and four legs? -Riddles

Description : What has a head, a foot, and four legs? -Riddles

Last Answer : A bed!