If L, B and D length, breadth and depth of water in a rectangular sedimentation tank of total discharge Q, the settling velocity, is (A) Q/H(B) Q/D(C) Q/(D × B) (D) Q/(L × B)

If L, B and D length, breadth and depth of water in a rectangular sedimentation tank of total 

discharge Q, the settling velocity, is 

(A) Q/H

(B) Q/D

(C) Q/(D × B) 

(D) Q/(L × B) 

by

1 Answer

Answer :

(D) Q/(L × B) 

by

Related questions

In a sedimentation tank (length L, width B, depth D) the settling velocity of a particle for a discharge Q, is A. Q/(B × D) B. Q/(L × D) C. Q/L D. Q/(B × L)

Description : In a sedimentation tank (length L, width B, depth D) the settling velocity of a particle for a discharge Q, is A. Q/(B × D) B. Q/(L × D) C. Q/L D. Q/(B × L)

Last Answer : ANS: D

The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach) (A) (2/3) Cd × L. 2g [H1 - Ha] (B) (2/3) Cd × L. 2g [H1 3/2 - Ha 3/2] (C) (2/3) Cd × L. 2g [H1 2 - Ha 2 ] (D) (2/3) Cd × L. 2g [H1 5/2 - Ha 5/2]

Description : The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of ... 2g [H1 2 - Ha 2 ] (D) (2/3) Cd L. 2g [H1 5/2 - Ha 5/2]

Last Answer : Answer: Option B

A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated load W at its mid-span. The same bar experiences an extension e under same tensile load. The ratio of the maximum deflection to the elongation, is (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Description : A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated  load W at its mid-span. The same bar experiences an extension e under same tensile load. The  ratio of the maximum deflection to the ... (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Last Answer : (C) (L/2d)

The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is A. 204 cu.m B. 208 cu.m C. 212 cu.m D. 216 cu.m

Description : The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is A. 204 cu.m B. 208 cu.m C. 212 cu.m D. 216 cu.m

Last Answer : ANS: D

The efficiency of sedimentation tank does not depend upon (A) Depth of tank (B) Length of tank (C) Detention period (D) Velocity of water

Description : The efficiency of sedimentation tank does not depend upon  (A) Depth of tank  (B) Length of tank  (C) Detention period  (D) Velocity of water

Last Answer : (D) Velocity of water

The discharge through a channel of rectangular section will be maximum, if (A) Its depth is twice the breadth (B) Its breadth is twice the depth (C) Its depth is thrice the breadth (D) Its breadth is thrice the depth

Description : The discharge through a channel of rectangular section will be maximum, if (A) Its depth is twice the breadth (B) Its breadth is twice the depth (C) Its depth is thrice the breadth (D) Its breadth is thrice the depth

Last Answer : Answer: Option B

The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of discharge) (A) Q = (2/3) Cd × b × (2g) × (H2 - H1) (B) Q = (2/3) Cd × b × (2g) × (H2 1/2 - H1 1/2) (C) Q = (2/3) Cd × b × (2g) × (H2 3/2 - H1 3/2) (D) Q = (2/3) Cd × b × (2g) × (H2 2 - H1 2 )

Description : The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of ... H1 3/2) (D) Q = (2/3) Cd b (2g) (H2 2 - H1 2 )

Last Answer : Answer: Option C

The flow of water gets retarded, in (A) Settling tank (B) Sedimentation tank (C) Clarifier (D) All the above

Description : The flow of water gets retarded, in (A) Settling tank (B) Sedimentation tank (C) Clarifier (D) All the above

Last Answer : (D) All the above

The ratio of design discharge to the surface area of a sedimentation tank is called A. Surface loading B. Overflow rate C. Overflow velocity D. All of these

Description : The ratio of design discharge to the surface area of a sedimentation tank is called A. Surface loading B. Overflow rate C. Overflow velocity D. All of these

Last Answer : ANS: D

The discharge per unit plan area of a sedimentation tank, is generally called A. Over flow rate B. Surface loading C. Over flow velocity D. All the above

Description : The discharge per unit plan area of a sedimentation tank, is generally called A. Over flow rate B. Surface loading C. Over flow velocity D. All the above

Last Answer : ANS: D

The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a rectangular notch is given by (A) dQ/Q = (1/2) × (dH/H) (B) dQ/Q = (3/4) × (dH/H) (C) dQ/Q = (dH/H) (D) dQ/Q = (3/2) × (dH/H)

Description : The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a rectangular notch is given by (A) dQ/Q = (1/2) × (dH/H) (B) dQ/Q = (3/4) × (dH/H) (C) dQ/Q = (dH/H) (D) dQ/Q = (3/2) × (dH/H)

Last Answer : Answer: Option D

The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Description : The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Last Answer : ANS: D

When the coefficient of discharge (Cd) is 0.623, then the general equation for discharge over a rectangular weir is (A) 1.84(L - 0.1nH)H 3/2 (B) 1.84(L - nH)H 2 (C) 1.84(L - 0.1nH)H 5/2 (D) 1.84(L - nH)H 3

Description : When the coefficient of discharge (Cd) is 0.623, then the general equation for discharge over a rectangular weir is (A) 1.84(L - 0.1nH)H 3/2 (B) 1.84(L - nH)H 2 (C) 1.84(L - 0.1nH)H 5/2 (D) 1.84(L - nH)H 3

Last Answer : Answer: Option A

Gravity settling process is not involved in the working of a (A) Hydrocyclone (B) Classifier (C) Dorr-thickener (D) Sedimentation tank

Description : Gravity settling process is not involved in the working of a (A) Hydrocyclone (B) Classifier (C) Dorr-thickener (D) Sedimentation tank

Last Answer : (A) Hydrocyclone

The ratio of discharge and plan area of a continuous flow type settling tank, is known (A) Surface loading (B) Overflow (C) Overflow rate (D) All the above

Description : The ratio of discharge and plan area of a continuous flow type settling tank, is known (A) Surface loading (B) Overflow (C) Overflow rate (D) All the above

Last Answer : (D) All the above

The most economical section of a rectangular channel is one which has hydraulic mean depth or hydraulic radius equal to (A) Half the depth (B) Half the breadth (C) Twice the depth (D) Twice the breadth

Description : The most economical section of a rectangular channel is one which has hydraulic mean depth or hydraulic radius equal to (A) Half the depth (B) Half the breadth (C) Twice the depth (D) Twice the breadth

Last Answer : Answer: Option A

The capacity of a cuboidal tank is 50000 litres of water. Find the breadth of the tank, if its length and depth are respectively 2.5 m and 10 m -Maths 9th

Description : The capacity of a cuboidal tank is 50000 litres of water. Find the breadth of the tank, if its length and depth are respectively 2.5 m and 10 m -Maths 9th

Last Answer : Length (l) and depth (h) of tank is 2.5 m and 10 m respectively. To find: The value of breadth, say b. Formula to find the volume of a tank = l b h = (2.5 b 10) m3= 25b m3 Capacity ... of water (Given) Therefore, 25000 b = 50000 This implies, b = 2 Therefore, the breadth of the tank is 2 m.

For a continuous flow type of sedimentation tanks A. Width of the tank is normally kept about 6 m B. Length of the tank is normally kept 4 to 5 times the width C. Maximum horizontal flow velocity is limited to 0.3 m/minute D. All the above

Description : For a continuous flow type of sedimentation tanks A. Width of the tank is normally kept about 6 m B. Length of the tank is normally kept 4 to 5 times the width C. Maximum horizontal flow velocity is limited to 0.3 m/minute D. All the above

Last Answer : ANS: D

For a continuous flow type of sedimentation tanks A. Width of the tank is normally kept about 6 m B. Length of the tank is normally kept 4 to 5 times the width C. Maximum horizontal flow velocity is limited to 0.3 m/minute D. All the above

Description : For a continuous flow type of sedimentation tanks A. Width of the tank is normally kept about 6 m B. Length of the tank is normally kept 4 to 5 times the width C. Maximum horizontal flow velocity is limited to 0.3 m/minute D. All the above

Last Answer : D

Velocity of flow of water in plain sedimentation water tank, is normally kept (A) 3 cm/minute (B) 10 cm/minute (C) 20 cm/minute (D) 30 cm/minute

Description : Velocity of flow of water in plain sedimentation water tank, is normally kept  (A) 3 cm/minute  (B) 10 cm/minute  (C) 20 cm/minute  (D) 30 cm/minute 

Last Answer : (D) 30 cm/minute 

Consider the following statements: Mitra’s hyperbolic transition design is based on the principle that : 1. Flow depth in the canal, as well as the discharge, is constant 2. width of the canal varies along with the discharge 3. Rate of change of velocity per unit length of transition is constant throughout the length of the transition. Which of these statements are correct ? a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Description : Consider the following statements: Mitra's hyperbolic transition design is based on the principle that : 1. Flow depth in the canal, as well as the discharge, is constant 2. width of the canal varies along with the discharge 3. Rate ... a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Last Answer : d) 1 and 3 only

The sewage discharge in a detritus tank of a treatment plant is 576 litres/sec with flow velocity of 0.2 m/sec. If the ratio of width to depth is 2, the depth is A. 100 cm B. 110 cm C. 120 cm D. 150 cm

Description : The sewage discharge in a detritus tank of a treatment plant is 576 litres/sec with flow velocity of 0.2 m/sec. If the ratio of width to depth is 2, the depth is A. 100 cm B. 110 cm C. 120 cm D. 150 cm

Last Answer : ANS: C

If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Description : If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Last Answer : (A) wQH/15

A rectangular tank 10 m x 5 m in plan and 3 m deep is divided by a partition wall parallel to the shorter wall of the tank. One of the compartments contains water to a depth of 3 m, and the other a lighter liquid of specific gravity 0.75 to a depth of 2 m. The resultant pressure thrust on the partition wall is (a) 1000 kg (b) 1500 kg (c) 2000 kg (d) 2500 kg

Description : A rectangular tank 10 m x 5 m in plan and 3 m deep is divided by a partition wall parallel to the shorter wall of the tank. One of the compartments contains water to a depth of 3 m, and the other a lighter ... pressure thrust on the partition wall is (a) 1000 kg (b) 1500 kg (c) 2000 kg (d) 2500 kg

Last Answer : Correct Answer is 15000 kg

If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Description : If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Last Answer : Answer: Option C

The detention time of a circular tank of diameter d and water depth H, for receiving the sewage Q per hour, is A. d² (0.011d + 0.785H)/Q B. d (0.022d + 0.085H)/Q C. d (0.785d + 0.011H)/Q D. d (0.285d + 0.011H)/Q

Description : The detention time of a circular tank of diameter d and water depth H, for receiving the sewage Q per hour, is A. d² (0.011d + 0.785H)/Q B. d (0.022d + 0.085H)/Q C. d (0.785d + 0.011H)/Q D. d (0.285d + 0.011H)/Q

Last Answer : ANS: A

The discharge over a rectangular notch is (where b = Width of notch, and H = Height of liquid, above the sill of the notch) (A) (2/3) Cd × b × gH) (B) (2/3) Cd × b × g) × H (C) (2/3) Cd × b × g) × H 3/2 (D) (2/3) Cd × b × g) × H

Description : The discharge over a rectangular notch is (where b = Width of notch, and H = Height of liquid, above the sill of the notch) (A) (2/3) Cd × b × gH) (B) (2/3) Cd × b × g) × H (C) (2/3) Cd × b × g) × H 3/2 (D) (2/3) Cd × b × g) × H

Last Answer : Answer: Option C

According to Bazin's formula, the discharge over a rectangular weir is mL2g x H 3/2where m is equal to (A) 0.405 + (0.003/H) (B) 0.003 + (0.405/H) (C) 0.405 + (H/0.003) (D) 0.003 + (H/0.405)

Description : According to Bazin's formula, the discharge over a rectangular weir is mL2g x H 3/2where m is equal to (A) 0.405 + (0.003/H) (B) 0.003 + (0.405/H) (C) 0.405 + (H/0.003) (D) 0.003 + (H/0.405)

Last Answer : Answer: Option A

The discharge over a rectangular notch is (A) Inversely proportional to H 3/2 (B) Directly proportional to H 3/2 (C) Inversely proportional to H 5/2 (D) Directly proportional to H 5/2

Description : The discharge over a rectangular notch is (A) Inversely proportional to H 3/2 (B) Directly proportional to H 3/2 (C) Inversely proportional to H 5/2 (D) Directly proportional to H 5/2

Last Answer : Answer: Option B

A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same length and depth as the other bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Description : A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same ... bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Last Answer : Answer: Option C

The portion of the slab which acts monolithically with the beam and which resists the compressive stresses, is called _________of flange of the T-beam (a) Length (b) Breadth (c) Thickness (d) Depth

Description : The portion of the slab which acts monolithically with the beam and which resists the compressive stresses, is called _________of flange of the T-beam (a) Length (b) Breadth (c) Thickness (d) Depth

Last Answer : (b) Breadth

The settlement of a particle in sedimentation tank, is affected by A. Velocity of flow B. Viscosity of water C. Size and shape of solid D. All the above

Description : The settlement of a particle in sedimentation tank, is affected by A. Velocity of flow B. Viscosity of water C. Size and shape of solid D. All the above

Last Answer : ANS: D

The length, breadth and height of a rectangular parallelopiped are in the ratios 6 : 3 : 1. If the surface area of a cube is equal -Maths 9th

Description : The length, breadth and height of a rectangular parallelopiped are in the ratios 6 : 3 : 1. If the surface area of a cube is equal -Maths 9th

Last Answer : answer:

A rectangular park has a concrete footpath running in the middle of the park parallel to the length of the park. The rest of the park is used as a playing ground, which has an area of 253 sq. m. If the width of the path is 4m and the length of the park is greater than its breadth by 8 m. What is the area of the park? (in sq. m.) (a) 896 (b) 345 (c) 432

Description : A rectangular park has a concrete footpath running in the middle of the park parallel to the length of the park. The rest of the park is used as a playing ground, which has an area of 253 sq. m. If the width of the path ... m. What is the area of the park? (in sq. m.) (a) 896 (b) 345 (c) 432

Last Answer : (b) 345

A rectangular plot has a concrete path running inner side of the plot is used as a lawn, which has an area of 432 sq.m. If the width of the path is 4 m and the length of the plot is greater than its breadth by 2m, what is the area of the rectangular plot? 1) 980 m^2 2) 975 m^2 3) 984 m^2 4) 960 m^2 5) 965 m^2

Description : A rectangular plot has a concrete path running inner side of the plot is used as a lawn, which has an area of 432 sq.m. If the width of the path is 4 m and the length of the plot is greater than its breadth by 2m, what is ... plot? 1) 980 m^2 2) 975 m^2 3) 984 m^2 4) 960 m^2 5) 965 m^2

Last Answer : 4) 960 m^2

In a flow net (A) Flow lines and equipotential lines cross each other at right angles (B) Fields are rectangles whose length is twice the breadth (C) Smaller the dimensions of the field, smaller will be the hydraulic gradient and velocity of flow through it (D) For homogeneous soil, the curves are smooth and circular

Description : In a flow net (A) Flow lines and equipotential lines cross each other at right angles (B) Fields are rectangles whose length is twice the breadth (C) Smaller the dimensions of the field, ... gradient and velocity of flow through it (D) For homogeneous soil, the curves are smooth and circular

Last Answer : Option A

The detention time (t) of a settling tank, may be defined as the time required for A. A particle to travel along its length B. A particle to travel from top surface to bottom sludge zone C. The flow of sewage to fill the tank D. None of these

Description : The detention time (t) of a settling tank, may be defined as the time required for A. A particle to travel along its length B. A particle to travel from top surface to bottom sludge zone C. The flow of sewage to fill the tank D. None of these

Last Answer : ANS: C

A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Description : A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Last Answer : Answer: Option C

If is unit weight of water, Q the discharge in cumecs, H the pump, the H.P. of the motor is (A) H.P. = /75 (B) H.P. = /4500 (C) H.P. = /75 H (D) H.P. = /4500 H

Description : If is unit weight of water, Q the discharge in cumecs, H the pump, the H.P. of the motor is (A) H.P. = /75 (B) H.P. = /4500 (C) H.P. = /75 H (D) H.P. = /4500 H

Last Answer : Answer: Option A

Detention period of a settling tank is (A) Average theoretical time required for water to flow through the tank (B) Time required for flow of water to fill the tank fully (C) Average time for which water is retained in tank (D) All the above

Description : Detention period of a settling tank is  (A) Average theoretical time required for water to flow through the tank  (B) Time required for flow of water to fill the tank fully  (C) Average time for which water is retained in tank  (D) All the above

Last Answer : (D) All the above

The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress, due to same load at its mid span, is (A) 1/2 (B) 2/3 (C) 1/4 (D) 1/3

Description : The ratio of the length and depth of a simply supported rectangular beam which experiences  maximum bending stress equal to tensile stress, due to same load at its mid span, is  (A) 1/2  (B) 2/3  (C) 1/4  (D) 1/3

Last Answer : (B) 2/3 

The deflection of any rectangular beam simply supported, is (A) Directly proportional to its weight (B) Inversely proportional to its width (C) Inversely proportional to the cube of its depth (D) Directly proportional to the cube of its length

Description : The deflection of any rectangular beam simply supported, is (A) Directly proportional to its weight (B) Inversely proportional to its width (C) Inversely proportional to the cube of its depth (D) Directly proportional to the cube of its length

Last Answer : (C) Inversely proportional to the cube of its depth

149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Description : 149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Last Answer : Answer: Option C

The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a triangular notch is given by (A) dQ/Q = 3/2 × (dH/H) (B) dQ/Q = 2 × (dH/H) (C) dQ/Q = 5/2 × (dH/H) (D) dQ/Q = 3 × (dH/H)

Description : The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a triangular notch is given by (A) dQ/Q = 3/2 × (dH/H) (B) dQ/Q = 2 × (dH/H) (C) dQ/Q = 5/2 × (dH/H) (D) dQ/Q = 3 × (dH/H)

Last Answer : Answer: Option C

The maximum discharge over a broad crested weir is (A) 0.384 Cd × L × H1/2 (B) 0.384 Cd × L × H3/2 (C) 1.71 Cd × L × H1/(D) 1.71 Cd × L × H 3/

Description : The maximum discharge over a broad crested weir is (A) 0.384 Cd × L × H1/2 (B) 0.384 Cd × L × H3/2 (C) 1.71 Cd × L × H1/ (D) 1.71 Cd × L × H 3/

Last Answer : Answer: Option D

Distribution of wash water is provided in (A) Sedimentation tank (B) Slow sand filter (C) Rapid gravity filter (D) All the above

Description : Distribution of wash water is provided in  (A) Sedimentation tank  (B) Slow sand filter  (C) Rapid gravity filter  (D) All the above 

Last Answer : (C) Rapid gravity filter

What is that which, supposing it's greatest breadth to be four inches, length nine inches, and depth three inches and contains a solid foot? -Riddles

Description : What is that which, supposing it's greatest breadth to be four inches, length nine inches, and depth three inches and contains a solid foot? -Riddles

Last Answer : A shoe.

Normal values of overflow rate for plain sedimentation tank using coagulants, is (A) 750 to 1000 litres/hr/m2(B) 1000 to 1250 litres/hr/m2(C) 1250 to 1500 litres/hr/m2(D) 1500 litres/hr/m

Description : Normal values of overflow rate for plain sedimentation tank using coagulants, is (A) 750 to 1000 litres/hr/m2 (B) 1000 to 1250 litres/hr/m2 (C) 1250 to 1500 litres/hr/m2 (D) 1500 litres/hr/m

Last Answer : (B) 1000 to 1250 litres/hr/m2

Detention time for plain sedimentation tank usually ranges from (A) 2 to 4 hours (B) 4 to 8 hours (C) 6 to 10 hours (D) 8 to 12 hours

Description : Detention time for plain sedimentation tank usually ranges from (A) 2 to 4 hours (B) 4 to 8 hours (C) 6 to 10 hours (D) 8 to 12 hours

Last Answer : (B) 4 to 8 hours

Normal values of overflow rate for plain sedimentation tank, is (A) 250 to 500 litres/hr/m2 (B) 500 to 750 litres/hr/m2 (C) 750 to 1000 litres/hr/m2 (D) 1000 to 1250 litres/hr/m

Description : Normal values of overflow rate for plain sedimentation tank, is  (A) 250 to 500 litres/hr/m2 (B) 500 to 750 litres/hr/m2 (C) 750 to 1000 litres/hr/m2 (D) 1000 to 1250 litres/hr/m

Last Answer : (B) 500 to 750 litres/hr/m