Description : Number of displacement polynomials used for an element depends on . a.nature of element b.type of an element c.degrees of freedom d.nodes
Last Answer : c.degrees of freedom
Description : Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element
Last Answer : c.truss element
Description : How many minimum numbers of zeros are there in ‘3 x 3’ triangular matrix? a.4 b.3 c.5 d.6
Last Answer : b.3
Description : When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain
Last Answer : a.plane stress
Description : The actual thickness of plane strain element is . a.very large b.very small c.assumed by software d.any of the above
Last Answer : a.very large
Description : STL consists of an unordered list of _______ facets representing the outside skin of an object. a.linear b.triangular c.square d.hexagonal
Last Answer : b.triangular
Description : In part programming, interpolation is used for obtaining trajectory. a.helicoidal b.pentagonal c.triangular d.zig-zag
Last Answer : a.helicoidal
Description : The curve is defined as the locus of a point moving with _ degree of freedom a.0 b.1 c.2 d.3
Last Answer : b.1
Description : How many nodes are there in a tetrahedron element? a.3 b.4 c.5 d.6
Last Answer : b.4
Description : How many nodes are there in a tetrahedron with curved sides element? a.6 b.8 c.10 d.12
Last Answer : c.10
Description : How many nodes are there in a hexahedron element? a.4 b.6 c.8 d.10
Last Answer : c.8
Description : How many nodes are there in a 3-D brick element? a.3 b.6 c.8 d.9
Description : Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining
Last Answer : c.Additional holes, teeth and forming
Description : Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining
Last Answer : d.Plane surface machining
Description : Digit 3 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining
Last Answer : c.Rotational machining
Description : Digit 2 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining
Last Answer : b.Main shape
Description : Digit 1 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining
Last Answer : a.Part class
Description : In Opitz system, 2nd digit indicates a.Type and Shape b.External shape and external shape elements c.External plane surface finishing d.Auxiliary hole and gear teeth
Last Answer : b.External shape and external shape elements
Description : XY Plane Selection in CNC machining is done by….. a.G16 b.G17 c.G18 d.G19
Last Answer : b.G17
Description : The ___________ is used to create a surface using curves that form closed boundaries a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution
Last Answer : c.coons patch
Description : In modeling of a tabulated cylinder, the plane of the curve is _______ a.along the curve b.normal to the curve c.along the axis of the cylinder d.perpendicular to the axis of the cylinder
Last Answer : d.perpendicular to the axis of the cylinder
Description : The is used to create a surface using curves that form closed boundaries. a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution
Description : From the following, which is an axisymmetric surface? a.Plane Surface b.Ruled Surface c.Surface of Revolution d.All of the above
Last Answer : c.Surface of Revolution
Description : Which of this is compulsory for 2D reflection? a.Reflection plane. b.Origin c.Reflection axis d.Co-ordinate axis.
Last Answer : c.Reflection axis
Description : Which of the following is NOT true?Image formed by reflection through a plane mirror is a.of same size b.same orientation c.is at same distance from the mirror d.virtual
Last Answer : b.same orientation
Description : The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing
Last Answer : a.Rotation
Description : In FEA of a fluid mechanics problem, we need to find . a.stress distribution b.heat flux distribution c.pressure distribution d.all of the above
Last Answer : c.pressure distribution
Description : For thermal analysis, the field variable is a.stress b.strain c.displacement d.Temperature
Last Answer : d.Temperature
Description : From which of the following is not the main element of Flexible manufacturing system a.Work handling system b.Material handling system c.Tool handling system d.Main frame computer
Last Answer : a.Work handling system
Description : The applications of the Finite Element Method in two-dimensional analyses are . a.stretching of plates b.gravity of dams c.axisymmetric shells d.all of the above
Last Answer : c.axisymmetric shells
Description : is defined as the ratio of the largest dimension of theelement to the smallest dimension. a.Element depth ratio b.Mode shape ratio c.Aspect ratio d.None of the above
Last Answer : c.Aspect ratio
Description : The finite element methods can be applied in ---------areas. a.thermal b.soil and rock mechanics c.vibration d.all of the above
Last Answer : d.all of the above
Description : is/are the phase/s of finite element method a.Pre-processing b.Solution c.Post Processing d.None
Last Answer : c.Post Processing
Description : Axis-Symmetric element is Element a.1D b.2D c.3D d.4D
Last Answer : b.2D
Description : From below, choose the condition for the axisymmetric element. a.Symmetric about axis b.Boundary conditions are symmetric about an axis c.Loading conditions are symmetric about an axis d.All the above
Last Answer : d.All the above
Description : The determinant of an element stiffness matrix is always a.3 b.2 c.1 d.
Last Answer : d.0
Description : The truss element can deform only in the a.vertical direction b.horizontal direction c.inclined direction d.axial direction
Last Answer : d.axial direction
Description : The truss element can resist only a.surface force b.axial force c.point load d.none of the above
Last Answer : b.axial force
Description : To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function
Last Answer : a.shape function
Description : Example of 2-D Element is . a.bar b.triangle c.hexahedron d.tetrahedron
Last Answer : b.triangle
Description : Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above
Last Answer : a.approximate numerical solution
Description : The numbers of node for 1 D element are a.1 b.2 c.3 d.
Last Answer : b.2
Description : The finite element method is mostly used in the field of a.structural mechanics b.classical mechanics c.applied mechanics d.engineering mechanics
Last Answer : d.engineering mechanics
Description : From the following, which type of element is not two dimensional? a.Tetrahedron b.Quadrilateral c.Parallelogram d.Rectangle
Last Answer : a.Tetrahedron
Description : What is the full form of FEA a.Fracture Element Analysis b.Finite Element Analysis c.Future Electronic Analysis d.None of the above
Last Answer : b.Finite Element Analysis
Description : Rotation is simply---------object w.r.t origin or centre point. a.Turn b.Shift c.Compression d.Drag element
Last Answer : a.Turn
Description : For Q 51, find coordinates of point on circle at u=0 a.11.6, 7 b.7, 11 c.11, 7 d.11.5, 7.5
Last Answer : a.11.6, 7
Description : For Q 51, find radius of circle a.3 b.3.6 c.4 d.3.5
Last Answer : b.3.6
Description : A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5
Last Answer : a.9.24,9.24
Description : Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]
Last Answer : c.[3.75 4.75 6.75]