Description : How many nodes are there in a tetrahedron with curved sides element? a.6 b.8 c.10 d.12
Last Answer : c.10
Description : Example of 2-D Element is . a.bar b.triangle c.hexahedron d.tetrahedron
Last Answer : b.triangle
Description : From the following, which type of element is not two dimensional? a.Tetrahedron b.Quadrilateral c.Parallelogram d.Rectangle
Last Answer : a.Tetrahedron
Description : How many nodes are there in a hexahedron element? a.4 b.6 c.8 d.10
Last Answer : c.8
Description : How many nodes are there in a 3-D brick element? a.3 b.6 c.8 d.9
Description : Number of displacement polynomials used for an element depends on . a.nature of element b.type of an element c.degrees of freedom d.nodes
Last Answer : c.degrees of freedom
Description : For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6
Last Answer : b.3*3
Description : The characteristic of the shape function is a.the shape function has a unit value at one nodal point and zero value at the other nodes b.the sum of the shape function is equal to one c.both a & b d.None of the above
Last Answer : c.both a & b
Description : A triangular plane stress element has how many degrees of freedom? a.3 b.4 c.5 d.6
Last Answer : d.6
Description : From which of the following is not the main element of Flexible manufacturing system a.Work handling system b.Material handling system c.Tool handling system d.Main frame computer
Last Answer : a.Work handling system
Description : The actual thickness of plane strain element is . a.very large b.very small c.assumed by software d.any of the above
Last Answer : a.very large
Description : The applications of the Finite Element Method in two-dimensional analyses are . a.stretching of plates b.gravity of dams c.axisymmetric shells d.all of the above
Last Answer : c.axisymmetric shells
Description : is defined as the ratio of the largest dimension of theelement to the smallest dimension. a.Element depth ratio b.Mode shape ratio c.Aspect ratio d.None of the above
Last Answer : c.Aspect ratio
Description : The finite element methods can be applied in ---------areas. a.thermal b.soil and rock mechanics c.vibration d.all of the above
Last Answer : d.all of the above
Description : is/are the phase/s of finite element method a.Pre-processing b.Solution c.Post Processing d.None
Last Answer : c.Post Processing
Description : Axis-Symmetric element is Element a.1D b.2D c.3D d.4D
Last Answer : b.2D
Description : From below, choose the condition for the axisymmetric element. a.Symmetric about axis b.Boundary conditions are symmetric about an axis c.Loading conditions are symmetric about an axis d.All the above
Last Answer : d.All the above
Description : The determinant of an element stiffness matrix is always a.3 b.2 c.1 d.
Last Answer : d.0
Description : Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element
Last Answer : c.truss element
Description : The truss element can deform only in the a.vertical direction b.horizontal direction c.inclined direction d.axial direction
Last Answer : d.axial direction
Description : The truss element can resist only a.surface force b.axial force c.point load d.none of the above
Last Answer : b.axial force
Description : To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function
Last Answer : a.shape function
Description : Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above
Last Answer : a.approximate numerical solution
Description : The numbers of node for 1 D element are a.1 b.2 c.3 d.
Last Answer : b.2
Description : The finite element method is mostly used in the field of a.structural mechanics b.classical mechanics c.applied mechanics d.engineering mechanics
Last Answer : d.engineering mechanics
Description : What is the full form of FEA a.Fracture Element Analysis b.Finite Element Analysis c.Future Electronic Analysis d.None of the above
Last Answer : b.Finite Element Analysis
Description : Rotation is simply---------object w.r.t origin or centre point. a.Turn b.Shift c.Compression d.Drag element
Last Answer : a.Turn
Description : For Q 51, find coordinates of point on circle at u=0 a.11.6, 7 b.7, 11 c.11, 7 d.11.5, 7.5
Last Answer : a.11.6, 7
Description : For Q 51, find radius of circle a.3 b.3.6 c.4 d.3.5
Last Answer : b.3.6
Description : A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5
Last Answer : a.9.24,9.24
Description : Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]
Last Answer : c.[3.75 4.75 6.75]
Description : Find the tangent vector of line having end points P1(3,5,8) and P2 (6,4,3) a.3i+j-5k b.3i-j-5k c.3i-j+5k d.-3i-j-5k
Last Answer : b.3i-j-5k
Description : Write parametric equation of line having end points P1(3,5,8) and P2 (6,4,3). a.[3 5 8]+u[3 -1 -5] b.[3 5 8]+u[3 1 5] c.[3 8 5]+u[3 -1 -5] d.[3 5 8]+u[-3 1 5]
Last Answer : a.[3 5 8]+u[3 -1 -5]
Description : A line AB with end points A (2, 1) & B (7, 6) is to be moved by 3 units in x-direction & 4units in y-direction. Calculate new coordinates of points B. a.(10, 2) b.(2, 10) c.(10, 10) d.(10, 5)
Last Answer : c.(10, 10)
Description : Coordinate of â- ABCD is WCS are: lowermost corner A(2,2) & diagonal corner are C(8,6). W.r.t MCS. The coordinates of origin of WCS system are (5,4). If the axes of WCS are at 600 in CCW w.r.t. the axes of MCS. Find new ... in MCS. a.(4.268, 6.732) b.(5.268, 6.732) c.(4.268, 4.732) d.(6.268, 4.732)
Last Answer : a.(4.268, 6.732)
Description : How many minimum numbers of zeros are there in ‘3 x 3’ triangular matrix? a.4 b.3 c.5 d.6
Last Answer : b.3
Description : If a ‘3 x 3’ matrix shears in Y direction, how many elements of it are ‘0’? a.2 b.3 c.6 d.5
Last Answer : d.5
Description : If a ‘3 x 3’ matrix shears in X direction, how many elements of it are ‘1’? a.2 b.3 c.6 d.5
Description : A circle is passing through two end points A[6,4] and B[10,10]. Find center point ofcircle a.7,8 b.8,8 c.8,7 d.7,7
Last Answer : c.8,7
Description : Two lines L1 and L2 having Parametric equations are P1=[3 4 7]+u[2 2 -6] and P2=[15 -2]+u[1 4 2]. Tangent vector for line L1 a.2i+2j-6k b.2i+2j+6k c.2i-2j-6k d.6-2j-2k
Last Answer : a.2i+2j-6k
Description : Reflection about the line y=0, the axis, is accomplished with the transformationmatrix with how many elements as ‘0’? a.8 b.9 c.4 d.6
Description : Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining
Last Answer : c.Additional holes, teeth and forming
Description : Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus
Last Answer : a.5 axis CNC Milling
Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)
Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)
Description : In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)
Last Answer : b.(10, 5)
Description : In how many ways CNC machine tool systems can be classified? a.2 b.3 c.4 d.5
Description : The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the ... b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5
Last Answer : a.N010 GO2 X10 Y10 X5 Y5 R5
Description : n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion ... 0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0
Last Answer : b.N010 GO2 X7.0 Y2.0 I5.0 J2.0
Description : The sum of the shape function is equal to a.0 b.0.5 c.1 d.2
Last Answer : c.1
Description : Find parametric equation for Y-coordinates of Hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.2u3-3u2+2u+4 b.3u3-2u2-2u-4 c.2u3-3u2-2u-4 d.2u3+3u2+2u+4
Last Answer : a.2u3-3u2+2u+4