The finite element method is mostly used in the field of a.structural mechanics b.classical mechanics c.applied mechanics d.engineering mechanics

The finite element method is mostly used in the field of a.structural mechanics b.classical mechanics c.applied mechanics d.engineering mechanics
by

1 Answer

Answer :

d.engineering mechanics
by

Related questions

The finite element methods can be applied in ---------areas. a.thermal b.soil and rock mechanics c.vibration d.all of the above

Description : The finite element methods can be applied in ---------areas. a.thermal b.soil and rock mechanics c.vibration d.all of the above

Last Answer : d.all of the above

The applications of the Finite Element Method in two-dimensional analyses are . a.stretching of plates b.gravity of dams c.axisymmetric shells d.all of the above

Description : The applications of the Finite Element Method in two-dimensional analyses are . a.stretching of plates b.gravity of dams c.axisymmetric shells d.all of the above

Last Answer : c.axisymmetric shells

is/are the phase/s of finite element method a.Pre-processing b.Solution c.Post Processing d.None

Description : is/are the phase/s of finite element method a.Pre-processing b.Solution c.Post Processing d.None

Last Answer : c.Post Processing

Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above

Description : Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above

Last Answer : a.approximate numerical solution

What is the full form of FEA a.Fracture Element Analysis b.Finite Element Analysis c.Future Electronic Analysis d.None of the above

Description : What is the full form of FEA a.Fracture Element Analysis b.Finite Element Analysis c.Future Electronic Analysis d.None of the above

Last Answer : b.Finite Element Analysis

In FEA of a fluid mechanics problem, we need to find . a.stress distribution b.heat flux distribution c.pressure distribution d.all of the above

Description : In FEA of a fluid mechanics problem, we need to find . a.stress distribution b.heat flux distribution c.pressure distribution d.all of the above

Last Answer : c.pressure distribution

To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements

Description : To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements

Last Answer : d.finite elements

Which layout is mostly used for the batch type of production? a.Product layout b.Process layout c.In line layout d.None of the above

Description : Which layout is mostly used for the batch type of production? a.Product layout b.Process layout c.In line layout d.None of the above

Last Answer : b.Process layout

Which layout is mostly used for batch type of production? a.Product layout b.Process layout c.In line layout d.None of the above

Description : Which layout is mostly used for batch type of production? a.Product layout b.Process layout c.In line layout d.None of the above

Last Answer : b.Process layout

_____ is area of engineering and science which understand the different principles, structure andprogramming of robot a.Mechatronics b.Robotics c.Aeronautics d.None of the above

Description : _____ is area of engineering and science which understand the different principles, structure andprogramming of robot a.Mechatronics b.Robotics c.Aeronautics d.None of the above

Last Answer : b.Robotics

CAD/CAM is the relationship between a.science and engineering b.manufacturing and marketing c.design and manufacturing d.design and marketing

Description : CAD/CAM is the relationship between a.science and engineering b.manufacturing and marketing c.design and manufacturing d.design and marketing

Last Answer : c.design and manufacturing

A system that automates the drafting process with interactive computer graphics iscalled a.Computer Aided Engineering (CAE) b.Computer Aided Design (CAD) c.Computer Aided Manufacturing (CAM) d.Computer Aided Instruction (CAI)

Description : A system that automates the drafting process with interactive computer graphics iscalled a.Computer Aided Engineering (CAE) b.Computer Aided Design (CAD) c.Computer Aided Manufacturing (CAM) d.Computer Aided Instruction (CAI)

Last Answer : b.Computer Aided Design (CAD)

__________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Description : __________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : c.Formative process

A two dimensional rotation is applied to an object by a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.Any of the mentioned

Description : A two dimensional rotation is applied to an object by a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.Any of the mentioned

Last Answer : c.Only b

A translation is applied to an object by D a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.All of the mentioned

Description : A translation is applied to an object by D a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.All of the mentioned

Last Answer : a.Repositioning it along with straight line path

From which of the following is not the main element of Flexible manufacturing system a.Work handling system b.Material handling system c.Tool handling system d.Main frame computer

Description : From which of the following is not the main element of Flexible manufacturing system a.Work handling system b.Material handling system c.Tool handling system d.Main frame computer

Last Answer : a.Work handling system

How many nodes are there in a tetrahedron with curved sides element? a.6 b.8 c.10 d.12

Description : How many nodes are there in a tetrahedron with curved sides element? a.6 b.8 c.10 d.12

Last Answer : c.10

How many nodes are there in a hexahedron element? a.4 b.6 c.8 d.10

Description : How many nodes are there in a hexahedron element? a.4 b.6 c.8 d.10

Last Answer : c.8

How many nodes are there in a tetrahedron element? a.3 b.4 c.5 d.6

Description : How many nodes are there in a tetrahedron element? a.3 b.4 c.5 d.6

Last Answer : b.4

The actual thickness of plane strain element is . a.very large b.very small c.assumed by software d.any of the above

Description : The actual thickness of plane strain element is . a.very large b.very small c.assumed by software d.any of the above

Last Answer : a.very large

is defined as the ratio of the largest dimension of theelement to the smallest dimension. a.Element depth ratio b.Mode shape ratio c.Aspect ratio d.None of the above

Description : is defined as the ratio of the largest dimension of theelement to the smallest dimension. a.Element depth ratio b.Mode shape ratio c.Aspect ratio d.None of the above

Last Answer : c.Aspect ratio

Axis-Symmetric element is Element a.1D b.2D c.3D d.4D

Description : Axis-Symmetric element is Element a.1D b.2D c.3D d.4D

Last Answer : b.2D

From below, choose the condition for the axisymmetric element. a.Symmetric about axis b.Boundary conditions are symmetric about an axis c.Loading conditions are symmetric about an axis d.All the above

Description : From below, choose the condition for the axisymmetric element. a.Symmetric about axis b.Boundary conditions are symmetric about an axis c.Loading conditions are symmetric about an axis d.All the above

Last Answer : d.All the above

How many nodes are there in a 3-D brick element? a.3 b.6 c.8 d.9

Description : How many nodes are there in a 3-D brick element? a.3 b.6 c.8 d.9

Last Answer : c.8

The determinant of an element stiffness matrix is always a.3 b.2 c.1 d.

Description : The determinant of an element stiffness matrix is always a.3 b.2 c.1 d.

Last Answer : d.0

Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element

Description : Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element

Last Answer : c.truss element

The truss element can deform only in the a.vertical direction b.horizontal direction c.inclined direction d.axial direction

Description : The truss element can deform only in the a.vertical direction b.horizontal direction c.inclined direction d.axial direction

Last Answer : d.axial direction

The truss element can resist only a.surface force b.axial force c.point load d.none of the above

Description : The truss element can resist only a.surface force b.axial force c.point load d.none of the above

Last Answer : b.axial force

To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function

Description : To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function

Last Answer : a.shape function

Example of 2-D Element is . a.bar b.triangle c.hexahedron d.tetrahedron

Description : Example of 2-D Element is . a.bar b.triangle c.hexahedron d.tetrahedron

Last Answer : b.triangle

The numbers of node for 1 D element are a.1 b.2 c.3 d.

Description : The numbers of node for 1 D element are a.1 b.2 c.3 d.

Last Answer : b.2

Number of displacement polynomials used for an element depends on . a.nature of element b.type of an element c.degrees of freedom d.nodes

Description : Number of displacement polynomials used for an element depends on . a.nature of element b.type of an element c.degrees of freedom d.nodes

Last Answer : c.degrees of freedom

A triangular plane stress element has how many degrees of freedom? a.3 b.4 c.5 d.6

Description : A triangular plane stress element has how many degrees of freedom? a.3 b.4 c.5 d.6

Last Answer : d.6

From the following, which type of element is not two dimensional? a.Tetrahedron b.Quadrilateral c.Parallelogram d.Rectangle

Description : From the following, which type of element is not two dimensional? a.Tetrahedron b.Quadrilateral c.Parallelogram d.Rectangle

Last Answer : a.Tetrahedron

Rotation is simply---------object w.r.t origin or centre point. a.Turn b.Shift c.Compression d.Drag element

Description : Rotation is simply---------object w.r.t origin or centre point. a.Turn b.Shift c.Compression d.Drag element

Last Answer : a.Turn

An engineering science primarily concerned with heat and work conversions.  a. Thermodynamics  b. Mechanics  c. Physics  d. Electromagnetic

Description : An engineering science primarily concerned with heat and work conversions.  a. Thermodynamics  b. Mechanics  c. Physics  d. Electromagnetic

Last Answer : Thermodynamics

From the following in which FMS layout robots are used as material handling system a.Ladder layout b.Open field layout c.Loop layout d.Robot centered layout

Description : From the following in which FMS layout robots are used as material handling system a.Ladder layout b.Open field layout c.Loop layout d.Robot centered layout

Last Answer : d.Robot centered layout

From the following which FMS layout is combination of many loop and ladder layout a.Ladder layout b.Open field layout c.Loop layout d.None of the above

Description : From the following which FMS layout is combination of many loop and ladder layout a.Ladder layout b.Open field layout c.Loop layout d.None of the above

Last Answer : b.Open field layout

From the following in which FMS layout workstations are arranged in a loop with rungs a.Ladder layout b.Open field layout c.Loop layout d.None of the above

Description : From the following in which FMS layout workstations are arranged in a loop with rungs a.Ladder layout b.Open field layout c.Loop layout d.None of the above

Last Answer : a.Ladder layout

From the following in which FMS layout machine tools are kept along a straight line. a.Loop layout b.In line layout c.Ladder layout d.Open field layout

Description : From the following in which FMS layout machine tools are kept along a straight line. a.Loop layout b.In line layout c.Ladder layout d.Open field layout

Last Answer : b.In line layout

For thermal analysis, the field variable is a.stress b.strain c.displacement d.Temperature

Description : For thermal analysis, the field variable is a.stress b.strain c.displacement d.Temperature

Last Answer : d.Temperature

Which of the following is not the method of part family formation a.Visual inspection method b.Automatic product sorting c.Parts classification & coding d.Production flow analysis

Description : Which of the following is not the method of part family formation a.Visual inspection method b.Automatic product sorting c.Parts classification & coding d.Production flow analysis

Last Answer : b.Automatic product sorting

The following is basically a material flow simplification technique a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above

Description : The following is basically a material flow simplification technique a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above

Last Answer : c.Cell formation using Production Flow Analysis

Which of the following technique of grouping does not consider the design and shape aspect? a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above

Description : Which of the following technique of grouping does not consider the design and shape aspect? a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above

Last Answer : c.Cell formation using Production Flow Analysis

In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational – Material – Size – Shape b.Material – Rotational or non rotational – Size – Shape c.Size – Rotational or non rotational – Material – Shape d.Shape – Rotational or non rotational – Material – Size

Description : In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational †Material †Size †Shape b.Material †Rotational or non ... non rotational †Material †Shape d.Shape †Rotational or non rotational †Material †Size

Last Answer : a.Rotational or non rotational – Material – Size – Shape

From which of the following is robot programming method a.Manual method b.Lead through method c.Walk through method d.All of the above

Description : From which of the following is robot programming method a.Manual method b.Lead through method c.Walk through method d.All of the above

Last Answer : d.All of the above

From the following which method is used to guide the AGV. a.Wire guided b.Paint strip c.Self guided vehicle d.All of the above

Description : From the following which method is used to guide the AGV. a.Wire guided b.Paint strip c.Self guided vehicle d.All of the above

Last Answer : d.All of the above

From the following in which coding method supplementary code and form code are used? a.KK3 system b.The MICLASS system c.OPITZ coding system d.The DICLASS system

Description : From the following in which coding method supplementary code and form code are used? a.KK3 system b.The MICLASS system c.OPITZ coding system d.The DICLASS system

Last Answer : c.OPITZ coding system

Which one of the following is not a direct rapid tooling method? a.LOM Composite b.Direct AIM (ACES Injection Molding) c.Sand Molding d.Injection molding

Description : Which one of the following is not a direct rapid tooling method? a.LOM Composite b.Direct AIM (ACES Injection Molding) c.Sand Molding d.Injection molding

Last Answer : d.Injection molding

Which one of the following is not a rapid indirect tooling method? a.Vacuum Casting b.Investment Casting c.Laser-Engineered Net Shaping d.Injection molding

Description : Which one of the following is not a rapid indirect tooling method? a.Vacuum Casting b.Investment Casting c.Laser-Engineered Net Shaping d.Injection molding

Last Answer : c.Laser-Engineered Net Shaping