The back e.m.f of a motor at the moment of starting : -

The back e.m.f of a motor at the moment of starting : - 

a) zero b) maximum c) minimum d) optimum
by

1 Answer

Answer :

The back e.m.f of a motor at the moment of starting : - zero

by

Related questions

As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent...

Description : As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit?

Last Answer : As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit a resistance is connected in series with armature.

Calculate the Polar moment of inertia in m 4 of a single motor system from the following data: C = 8 GN/m 2 , L=9m, I = 600 Kg-m 2 , f=10 Hz a) 0.00027b) 0.00032 c) 0.00045 d) 0.00078

Description : Calculate the Polar moment of inertia in m 4 of a single motor system from the following data: C = 8 GN/m 2 , L=9m, I = 600 Kg-m 2 , f=10 Hz a) 0.00027b) 0.00032 c) 0.00045 d) 0.00078

Last Answer : a) 0.00027

In a Synchronous motor, the magnitude of stator back e.m.f (Eb) depends on

Description : In a Synchronous motor, the magnitude of stator back e.m.f (Eb) depends on

Last Answer : In a Synchronous motor, the magnitude of stator back e.m.f (Eb) depends on DC excitation only

If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will?

Last Answer : If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will increase.

In case the back e.m.f. and the speed of a D.C. motor are doubled, the torque developed by the motor will?

Last Answer : In case the back e.m.f. and the speed of a D.C. motor are doubled, the torque developed by the motor will remain unchanged.

The mechanical power developed by a shunt motor will be maximum when the ratio of back e.m.f. to applied voltage is?

Last Answer : The mechanical power developed by a shunt motor will be maximum when the ratio of back e.m.f. to applied voltage is 0.5.

What will happen if the back e.m.f. of a D.C. motor vanishes suddenly?

Last Answer : The armature may burn if the back e.m.f. of a D.C. motor vanishes suddenly.

Which of the following quantity maintains the same direction whether a D.C. machine runs as a generator or as a motor a. Induced e.m.f. b. Armature Current c. Field Current d. Supply Current

Description : Which of the following quantity maintains the same direction whether a D.C. machine runs as a generator or as a motor a. Induced e.m.f. b. Armature Current c. Field Current d. Supply Current  

Last Answer : Which of the following quantity maintains the same direction whether a D.C. machine runs as a generator or as a motor a. Induced e.m.f. b. Armature Current c. Field Current d. Supply Current  

The seven elements A, B, C, D, E, F and G are pushed onto a stack in reverse order, i.e., starting from G. The stack is popped five times and each element is inserted into a queue. Two elements are deleted from the queue and pushed back onto the stack. Now, one element is popped from the stack. The popped item is ................... (1) A (2) B (3) F (4) G

Description : The seven elements A, B, C, D, E, F and G are pushed onto a stack in reverse order, i.e., starting from G. The stack is popped five times and each element is inserted into a queue. Two elements are deleted from the queue and pushed ... The popped item is ................... (1) A (2) B (3) F (4) G

Last Answer : Answer: 2

A couple consists of a force P acting at a point A whose coordinates are (-1,2,4) m and force - F acting at a point whose coordinates are (2,3, -2)m. If F = 3i + 2j - 4k in kg units the moment of the couple in kg - m units would be a.8i - 6j - 3k b.12i - 3j + k c.16i - 12j - 6k d.4i - 3j + k e.8i + 5j + 3k

Description : A couple consists of a force P acting at a point A whose coordinates are (-1,2,4) m and force - F acting at a point whose coordinates are (2,3, -2)m. If F = 3i + 2j - 4k in kg units the moment of the couple in kg - m ... .8i - 6j - 3k b.12i - 3j + k c.16i - 12j - 6k d.4i - 3j + k e.8i + 5j + 3k

Last Answer : a. 8i - 6j - 3k

If M, I, R, E, F, and Y are the bending moment, moment of inertia, radius of curvature, modulus of elasticity stress and the depth of the neutral axis at section, then (A) M/I = R/E = F/Y (B) I/M = R/E = F/Y (C) M/I = E/R = E/Y (D) M/I = E/R = Y/F

Description : If M, I, R, E, F, and Y are the bending moment, moment of inertia, radius of curvature, modulus of  elasticity stress and the depth of the neutral axis at section, then  (A) M/I = R/E = F/Y (B) I/M = R/E = F/Y (C) M/I = E/R = E/Y (D) M/I = E/R = Y/F

Last Answer : (C) M/I = E/R = E/Y

What is the back E.M.F in Transformer ?

Description : What is the back E.M.F in Transformer ?

Last Answer : Back emf in transformer is when apply voltage in primary side of transformer. This voltage produce flux according to Faraday law electro magnetic induction. This flux called mutual flux and this ... secondary flux oppos the applied voltage according to lenz law. its called back emf of transformer

If Z and I are the section modulus and moment of inertia of the section, the shear force F and bending moment M at a section are related by (A) F = My/I (B) F = M/Z (C) F = dM/dx (D) F Mdx

Description : If Z and I are the section modulus and moment of inertia of the section, the shear force F and bending moment M at a section are related by (A) F = My/I (B) F = M/Z (C) F = dM/dx (D) F Mdx

Last Answer : (C) F = dM/dx

is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) (B) f = (A/P) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Description : is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) ... ) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Last Answer : Answer: Option C

is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Description : is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Last Answer : Answer: Option C

The deep beams are designed for (a) Shear force only (b) Bending moment only (c) Both S.F & B.M (d) Bearing

Description : The deep beams are designed for (a) Shear force only (b) Bending moment only (c) Both S.F & B.M (d) Bearing

Last Answer : (b) Bending moment only

Consequence of motor effect isA. electromagnetic induction B. current C. voltage D. e.m.f

Description :  Consequence of motor effect isA. electromagnetic induction B. current C. voltage D. e.m.f

Last Answer : electromagnetic induction

A step-down chopper, fed from a 120 volt DC source, operates a DC motor whose armature e.m.f. and

Description : A step-down chopper, fed from a 120 volt DC source, operates a DC motor whose armature e.m.f. and armature resistance are 100 volt and 0.5Ω respectively. With the magnitude control ratio 0.6, the quadrant of operation DC motor is  (a) First (b) Second (c) Third (d) Fourth

Last Answer : A step-down chopper, fed from a 120 volt DC source, operates a DC motor whose armature e.m.f. and armature resistance are 100 volt and 0.5Ω respectively. With the magnitude control ratio 0.6, the quadrant of operation DC motor is First

The induced e.m.f. in the armature conductors of a d.c. motor is?

Description : The induced e.m.f. in the armature conductors of a d.c. motor is?

Last Answer : The induced e.m.f. in the armature conductors of a d.c. motor is sinusoidal.

The counter e.m.f. of a d.c. motor?

Description : The counter e.m.f. of a d.c. motor?

Last Answer : The counter e.m.f. of a d.c. motor helps in energy conversion.

When the armature of a D.C. motor rotates, e.m.f. induced is

Last Answer : When the armature of a D.C. motor rotates, e.m.f. induced is back e.m.f.

When starting a DC propulsion motor the variable rheostat must FIRST be turned ____________. A. all the way to the run position then quickly back to slow B. to the slow position then gradually moved to full speed C. to the mid position D. quickly to the run position

Description : When starting a DC propulsion motor the variable rheostat must FIRST be turned ____________. A. all the way to the run position then quickly back to slow B. to the slow position then gradually moved to full speed C. to the mid position D. quickly to the run position

Last Answer : Answer: B

Starting torque can be obtained in the case of a single phase induction motor with identical main and ...

Description : Starting torque can be obtained in the case of a single phase induction motor with identical main and auxiliary windings by connecting:  (1) A capacitor across the mains (2) A capacitor in ... with the auxiliary winding (4) Equal value capacitors in series with the main and the auxiliary windings

Last Answer : Starting torque can be obtained in the case of a single phase induction motor with identical main and auxiliary windings by connecting:  A capacitor is series with the auxiliary winding.

Why a dc series motor has a high starting torque?

Description : Why a dc series motor has a high starting torque?

Last Answer : motor

Why does induction motor have high starting current?

Description : Why does induction motor have high starting current?

Last Answer : In induction motor , the flux produce is quadrature to the applied voltage. Since when we are going to start motor , there is no flux present inside . So in order to lets say compensate it ... times of current to further increase flux. So that is reason for high starting current in induction motor

Why a single phase motor is not a self starting motor?

Description : Why a single phase motor is not a self starting motor

Last Answer : The motor mechanical degree 360 degree this must covered revolving field so single phase to starting need starting winding with 90 degree to main winding

A balanced three-phase, 50 Hz voltage is applied to a 3 phase, 4 pole, induction motor. When the motor is delivering rated output, the slip is found to be 0.05. The speed of the rotor m.m.f. relative to the rotor structure is (A) 1500 r.p.m. (B) 1425 r.p.m. (C) 25 r.p.m. (D) 75 r.p.m.

Description : A balanced three-phase, 50 Hz voltage is applied to a 3 phase, 4 pole, induction motor. When the motor is delivering rated output, the slip is found to be 0.05. The speed of the rotor m.m.f. relative to the rotor structure is (A) 1500 r.p.m. (B) 1425 r.p.m. (C) 25 r.p.m. (D) 75 r.p.m.

Last Answer : (D) 75 r.p.m.

Better classroom management means (a) per group work and better interaction among pupils (b) prior preparation of teacher in the making of suitable aids (c) Punctuality of the teachers in coming in the class and finishing the course in time (d) Getting the attention and cooperation of all the students before starting the class/ task (e) Moving around the room to identify pupils having or creating problems (f) Avoid teaching when pupils are not in proper mood (g) All of these

Description : Better classroom management means (a) per group work and better interaction among pupils (b) prior preparation of teacher in the making of suitable aids (c) Punctuality of the teachers in coming in the ... creating problems (f) Avoid teaching when pupils are not in proper mood (g) All of these

Last Answer : (g) All of these

Any middle aged jellies starting over from scratch? I could use some cheerful optimisim as I am feeling very grim in the moment.

Description : Any middle aged jellies starting over from scratch? I could use some cheerful optimisim as I am feeling very grim in the moment.

Last Answer : Bought the farm means dead, maybe that should be worded differently? LOL. Leave it to you to have humor accidently during a serious and difficult time. I hope things turn around for you, I wish I had some wisdom to share.

In a cantilever carrying a uniformly varying load starting from zero at the free end, the Bending moment diagram is (a) A horizontal line parallel to x-axis (b) A line inclined to x-axis (c) Follows a parabolic law (d) Follows a cubic law

Description : In a cantilever carrying a uniformly varying load starting from zero at the free end, the Bending moment diagram is (a) A horizontal line parallel to x-axis (b) A line inclined to x-axis (c) Follows a parabolic law (d) Follows a cubic law

Last Answer : (d) Follows a cubic law

In case of D.C. shunt motors the speed is dependent on back e.m.f. only because?

Last Answer : In case of D.C. shunt motors the speed is dependent on back e.m.f. only because flux is practically constant in D:C. shunt motors.

In a variable speed induction motor derive V/f kept constant over a wide range of its frequency variation. ...

Description :  In a variable speed induction motor derive V/f kept constant over a wide range of its frequency variation. The motor operates in the following mode : -  a) Constant power mode b) Constant torque mode c) Constant slip mode d) Variable power and variable torque mode

Last Answer :  In a variable speed induction motor derive V/f kept constant over a wide range of its frequency variation. The motor operates in the following mode : - Constant torque mode

A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.Zero b.2i + 3j c.i - j - k d.i + j e.i + j + k

Description : A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.Zero b.2i + 3j c.i - j - k d.i + j e.i + j + k

Last Answer : c. i - j - k

A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.107 dynes b.i + j + k c.2i + 3j d.zero e.i - j - k

Description : A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.107 dynes b.i + j + k c.2i + 3j d.zero e.i - j - k

Last Answer : b. i + j + k

Define the following terms as referred to battery. a) E.M.F b) Internal resistance c) Ah efficiency d) WAh efficiency

Description : Define the following terms as referred to battery. a) E.M.F b) Internal resistance c) Ah efficiency d) WAh efficiency

Last Answer : a) E.M.F : The electromotive force of a battery is defined as the energy spent or the work done in taking a unit positive charge around the complete circuit of the battery i.e., in ... input required to restore the initial state of charge, under specified conditions, is called Watt-hr efficiency.

Which law states that induced e.m.f and current always opposes the cause producing them?

Description : Which law states that induced e.m.f and current always opposes the cause producing them?

Last Answer : Lenz's law states that induced e.m.f and current always opposes the cause producing them.

Five cells, each with an e.m.f. of 2V and internal resistance of 0.5Ω are connected in series.

Description : Five cells, each with an e.m.f. of 2V and internal resistance of 0.5Ω are connected in series. The resulting battery will have

Last Answer : Five cells, each with an e.m.f. of 2V and internal resistance of 0.5Ω are connected in series. The resulting battery will have An e.m.f. of 10V and an internal resistance of 2.5 Ω

These self inductance of a circuit is defined as twice the work done against the induced e.m.f.

Description : These self inductance of a circuit is defined as twice the work done against the induced e.m.f. on establishing unit current in the coil. If the current to be established in the coil is doubled, the work done ... induced e.m.f. will be  1. Doubled  2. Halved  3. four times  4. Quarter times 

Last Answer : These self inductance of a circuit is defined as twice the work done against the induced e.m.f. on establishing unit current in the coil. If the current to be established in the coil is doubled, the work done against the induced e.m.f. will be four times

The e.m.f. induced in the primary of a transformer: ...

Description : The e.m.f. induced in the primary of a transformer:  (A) is in phase with the flux (B) lags behind the flux by 90 degree (C) leads the flux by 90 degree (D) is in phase opposition to that of flux

Last Answer : The e.m.f. induced in the primary of a transformer: leads the flux by 90 degree 

For the production of induced e.m.f. field system of an electric machine_________.

Last Answer : For the production of induced e.m.f. field system of an electric machine may be on stator or rotor.

Who among the following is credited with starting the work on plant tissue culture? (1) F.C. Steward (2) P. Maheshwari (3) P.R. White (4) Haberlandt

Description : Who among the following is credited with starting the work on plant tissue culture? (1) F.C. Steward (2) P. Maheshwari (3) P.R. White (4) Haberlandt

Last Answer : (4) Haberlandt Explanation: G. Haberlandt, a German botanist, in 1902 cultured fully differentiated plant cells isolated from different plants. This was the very first step for the beginning of plant ... were made by the Cell Doctrine which admitted that a cell is capable of showing totipotency.

Who among the following is credited with starting the work on plant tissue culture? (1) F.C. Steward (2) P. Maheshwari (3) P.R. White (4) Haberlandt

Description : Who among the following is credited with starting the work on plant tissue culture? (1) F.C. Steward (2) P. Maheshwari (3) P.R. White (4) Haberlandt

Last Answer : Haberlandt

in the expression tau=r*f. is r equal to the moment arm explain?

Description : in the expression tau=r*f. is r equal to the moment arm explain?

Last Answer : ending

Squirrel cage induction motor has a) Zero starting torque b) Very small starting torque c) Medium starting torque d) Very high starting torque

Description : Squirrel cage induction motor has a) Zero starting torque b) Very small starting torque c) Medium starting torque d) Very high starting torque

Last Answer : Ans: B

The starting current of an electric motor is ________ the current flowing after the motor reaches its normal running speed. (a) nearly equal to (b) exactly equal to (c) less than (d) much greater than

Description : The starting current of an electric motor is ________ the current flowing after the motor reaches its normal running speed. (a) nearly equal to (b) exactly equal to (c) less than (d) much greater than

Last Answer : Ans:(d)

The wiring diagram for the motor starting circuit shown in the illustration indicates ______________. EL-0007 A. resistance starting B. reduced voltage starting C. low voltage protection D. low voltage release

Description : The wiring diagram for the motor starting circuit shown in the illustration indicates ______________. EL-0007 A. resistance starting B. reduced voltage starting C. low voltage protection D. low voltage release

Last Answer : Answer: C

A series wound DC motor has its armature and field connected in series with a resistor. When the motor is disconnected from its power supply, this motor will exemplify __________. A. the proper connections for across the line starting B. the proper connections for an automatic strip heater C. a reversing controller circuit D. dynamic braking

Description : A series wound DC motor has its armature and field connected in series with a resistor. When the motor is disconnected from its power supply, this motor will exemplify __________. A. the ... the proper connections for an automatic strip heater C. a reversing controller circuit D. dynamic braking

Last Answer : Answer: D

Which statement is true concerning a split-phase induction motor? A. Motor rotation can be reversed without changing the windings or leads. B. Motor speed can be readily adjusted from zero to full speed. C. The motor will run as a generator with the proper wiring. D. Motor rotation can be reversed by reversing the leads on the starting winding.

Description : Which statement is true concerning a split-phase induction motor? A. Motor rotation can be reversed without changing the windings or leads. B. Motor speed can be readily adjusted from zero to full ... proper wiring. D. Motor rotation can be reversed by reversing the leads on the starting winding.

Last Answer : Answer: D

What is the main function in the use of a capacitor for starting a single phase motor? A. Reduce radio interference B. Split the phase to establish a rotating magnetic field C. Reduce the phase angle D. Prolong the life of the starting contacts

Description : What is the main function in the use of a capacitor for starting a single phase motor? A. Reduce radio interference B. Split the phase to establish a rotating magnetic field C. Reduce the phase angle D. Prolong the life of the starting contacts

Last Answer : Answer: B

A single-phase induction motor starts, comes up to about 75% rated speed, slows down to a lower speed, and accelerates again. The problem is most likely in the ____________. A. starting winding B. running winding C. starting capacitor D. running centrifugal switch

Description : A single-phase induction motor starts, comes up to about 75% rated speed, slows down to a lower speed, and accelerates again. The problem is most likely in the ____________. A. starting winding B. running winding C. starting capacitor D. running centrifugal switch

Last Answer : Answer: B