Do gasses ever move via anything other than a pressure differential?

1 Answer

Answer :

answer:Gases (sp!!) are always in motion. SRM

Related questions

Description : Electricity is passed through water in electrolysis and two gases are formed. If one gas has a boiling point of -183 degrees and other has a boiling point of -253 degrees what are the gasses?

Last Answer : We know that the gas oxygen has a boiling point of about -183 degrees C. The gas hydrogen has a boiling point of about -253 degrees C.

Description : Which is atmospheric attenuation? A. Attenuation due to rain B. Attenuation due to other gasses C. Attenuation due to mist and fog D. Due to water vapor and oxygen

Last Answer : D. Due to water vapor and oxygen

Description : Can you help me understand why my answer is wrong (system of differential equations, solved via eigenvectors)?

Last Answer : Ah, I think I figured it out, kind of. It seems the formula the professor gave us was wrong? I have a solution, but not via eigenvectors. Would still appreciate help if anyone can offer it.

Description : At what temperatures do gasses become plasma?

Last Answer : Brian1946 You probably graduated in 1964 from high school Somewhere above 1,000,000,000 degrees as I recall, but I graduated in high school in 1964

Description : Are the oil spill gasses causing Floridians and south Texans to become sick?

Last Answer : Is that why I am coughing and nauseted?

Description : How would one combine the gasses oxygen and hydrogen to form water?

Last Answer : Well, I know it would be two parts hydrogen to one part oxygen, but how the process actually occurs, I can’t tell you.

Description : A lead-acid battery is considered fully charged when the ______________. A. electrolyte gasses freely B. battery charger ammeter indicates a positive reading C. terminal voltage reaches a constant value at a ... cells reaches the correct value and no longer increases over a period of 1 to 4 hours

Last Answer : Answer: D

Description : Atmospheric attenuation is an attenuation which is due to A. mist and fog B. gasses in the atmosphere C. water vapor and oxygen D. rain

Last Answer : C. water vapor and oxygen

Description : Which of the following terms refers to the use of compressed gasses to drive (power) the robot device? a) pneumatic b) hydraulic c) piezoelectric d) photosensitive

Last Answer : a) pneumatic

Description : During respiration by which process gasses inter and release from the blood

Last Answer : Diffussion

Description : Have you ever ordered anything on Amazon.Co.Uk via Prime but in the States?

Last Answer : I’ve bought books and a CD or two from there. I doubt Prime will do 2 days shipping.

Description : How much would it cost to move a 20 X 20 log cabin via skycrane 10 miles?

Last Answer : Construction takes eight to nine months and ranges from $125 to $175 per square foot, Beauchesne says. “The typical cost for a turnkey log cabin, with land, can run anywhere from $175,000 up to $350,000 or more depending on the size,”

Description : In order that flow takes place between two points in a pipeline, the differential pressure between these points must be more than (A) Frictional force (B) Viscosity (C) Surface friction (D) All of the above

Last Answer : Answer: Option D

Description : What Differential Pressure Transmitters Do?

Last Answer : Differential pressure transmitters were originally designed for use in pipes to measure pressure before and after the fluid encounters a filter, pump, or another interruption in flow. Standard ... realized that differential pressure measurements could be used to determine liquid level as well.

Description : which areas can be used for as the differential pressure transmitter?

Last Answer : 1: Guage pressure measurement by supply the HIGH side and venting the LOW side to the atmosphere2: Measurement of level of open tank by connecting the impulse line at the bottom of the tank to ... : Measurement of absolute pressure by supply the HIGH side and blinding or blocking the the LOW side

Description : What areas can Differential pressure transmitter be used in??

Last Answer : 1: Guage pressure measurement by supply the HIGH side and venting the LOW side to the atmosphere2: Measurement of level of open tank by connecting the impulse line at the bottom of the tank to ... : Measurement of absolute pressure by supply the HIGH side and blinding or blocking the the LOW side

Description : Is a differential pressure transmitter a fuse that is connected power supply?

Last Answer : A differential pressure transmitter accurately measures your liquid levels, differential pressure and gauge pressure. The transmitter utilizes a unique silicone sensor with microprocessor technology to provide great performance and functionality.

Description : Ceramic recuperators compared to metallic recuperators for the same duty (A) Are lighter (B) Occupy more space (C) Are less costly (D) Have higher pressure differential between flue gas & air side

Last Answer : (B) Occupy more space

Description : Permanent pressure loss in a well designed Venturimeter is about __________ percent of the venturi differential. (A) 1 (B) 10 (C) 30 (D) 50

Last Answer : (A) 1

Description : Pressure difference between two points in vessels, pipelines or in two different pipelines can be measured by a differential manometer. The pressure difference measured as the mm of water column in case of mercury-water, differential manometer is ... mm). (A) H (B) 12.6 H (C) 13.6 H (D) 14.6 H

Last Answer : (B) 12.6 H

Description : Working principle of manometer comprises of balancing a coloumn of liquid against the pressure to be measured. Inclined tube manometer is especially used for the measurement of __________ pressure. (A) Small differential (B) Atmospheric (C) Absolute (D) Gage

Last Answer : (A) Small differential

Description : A differential pressure cell is used for (A) Measuring small pressure difference in gases (B) Measuring small pressure difference in liquids (C) Remote recording of pressure difference (D) Measuring the difference of the impact & the static pressure

Last Answer : (C) Remote recording of pressure difference

Description : With increase in the ratio of orifice diameter to pipe diameter, the fraction of the orifice pressure differential that is permanently lost (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Last Answer : (B) Decreases

Description : Differential manometer measures the (A) Atmospheric pressure (B) Sub-atmospheric pressure (C) Pressure difference between two points (D) None of these

Last Answer : (C) Pressure difference between two points

Description : 2. Differential manometer measures the (A) Absolute pressure (B) Gauge pressure (C) Pressure difference (D) Pressure gradien

Last Answer : (C) Pressure difference

Description : Percentage of differential pressure lost in a Venturimeter with a tapering of 15° may be about (A) 1 (B) 10 (C) 25 (D) 50

Last Answer : Option B

Description : A differential manometer is used to measure (A) Atmospheric pressure (B) Pressure in pipes and channels (C) Pressure in Venturimeter (D) Difference of pressures between two points in a pipe

Last Answer : Answer: Option D

Description : Differential manometer is used to measure (A) Pressure in pipes, channels etc. (B) Atmospheric pressure (C) Very low pressure (D) Difference of pressure between two points

Last Answer : Answer: Option D

Description : Maximum Differential pressure: a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure b. Is the absolute pressure provided by the vacuum ... time limit d. Is the absolute pressure the cabin pressure ducting is designed to carry

Last Answer : a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure

Description : When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Last Answer : a. Rapid descent when AC descends below cabin altitude

Description : What is the method of determining maximum differential pressure during hydro testing of shell and tube heat exchangers?

Last Answer : Mr. Richard Lee of Plumlee International Consulting usually heat exchangers have two sets of test pressures per side, one for strength tests, and the other for operating or leak tests. The ... . The acceptability of this lower pressure test will often depend upon the consequences of a leak.

Description : Maximum Differential pressure: a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure b. Is the absolute pressure provided by the ... time limit d. Is the absolute pressure the cabin pressure ducting is designed to carry

Last Answer : a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure

Description : When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Last Answer : a. Rapid descent when AC descends below cabin altitude

Description : Explain differential pressure measurement method as indirect method for level measurement.

Last Answer : Differential pressure measurement as indirect method for level measurement:  Closed vessel: Differential pressure (DP) transmitters used for liquid level application measure hydrostatic pressure head. In a closed ... side of the DP and the low pressure side is vented to atmosphere.  

Description : Define gauge pressure and differential pressure

Last Answer : (i) Gauge pressure: Gauge pressure is defined as the difference between actual pressure and atmospheric pressure.  Gauge pressure= Pabsolute - Patmospheric  (ii) Atmospheric pressure: Atmospheric pressure ... atmosphere around it. It shows the difference between two pressures of the same unit. 

Description : Explain working of pressure switch with suitable diagram. State the function of differential setting in pressure switch.

Last Answer : Pressure switch is used to turn on/off when specified pressure is reached. It consists of a pressure port and bellows. When pressure is applied, bellows expand and actuate the snap action ... pressure setting i.e. hysteresis setting. This prevents chattering of pressure switch contacts.

Description : The cerebrospinal fluid: a. has a normal volume of 150 ml b. has a normal opening pressure of 7 - 18 cm H2O c. flows from the ventricles to the subarachnoid space via the foramen of Monro d. does not contain neutrophils in normal individuals

Last Answer : has a normal volume of 150 m

Description : An AC generator operating in parallel loses its excitation without tripping the circuit breaker. This will __________. A. not affect the faulty generator due to the compensation of the other generators B. ... between the armature and the bus D. cause high currents to be induced in the field windings

Last Answer : Answer: D

Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

Description : Does anything move faster than light?

Last Answer : Bad news.

Description : Is anything more exhausting than a cross-country move?

Last Answer : A cross-ocean move?

Description : Cumulative analysis for determining surface is more precise than differential analysis, because of the (A) Assumption that all particles in a single fraction are equal in size (B) Fact that screening is more ... all particles in a single fraction are equal in size, is not needed (D) None of these

Last Answer : (C) Assumption that all particles in a single fraction are equal in size, is not needed

Description : Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate ... less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Last Answer : (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order

Description : The medium which allows the growth of more than one microorganisms of interest but with morphologically distinguishable colonies is known as A- selective medium B- enrichment medium C- differential medium D- none of these

Last Answer : differential medium

Description : If the foundations of all the columns of a structure are designed on the total live and dead load basis, then (A) There will be no settlement of columns (B) There will be no ... will be more than interior columns (D) The settlement of interior columns will be more than exterior columns

Last Answer : Answer: Option C

Description : Times in your life when you've liked someone, did you make the first move as far as indicating that you liked them, or did you wait for them to show you that they liked you before you did anything?

Last Answer : Hmm, it was a bit of both (female here). It completely depended upon the person and the situation.

Description : Is there anything that you'd truly miss if you were to move away from your area?

Last Answer : There would be so much I’d miss about NYC!

Description : I am planning to move to London in 3 months and I am most concern with how much it will cost me to live decently in this place. I found some useful and informative sites regarding ... anyone share their knowledge? Anything that can help me compute for my monthly expenses would be most appreciated.

Last Answer : answer:CCCCCONGRATULATIONS, YOU MADE THE LARGEST QUESTION YET !!! …and i’m not even gonna bother reading something that long…