ate of wear chain drive system a) Directly related to speed of chain b) Inversely related to size of sprocket of chain length c) Both (a) and (b) d) None of the above

ate of wear chain drive system
a) Directly related to speed of chain
b) Inversely related to size of sprocket of chain length c) Both (a) and (b)
d) None of the above
by

1 Answer

Answer :

c) Both (a) and (b)
by

Related questions

The commonly used power transmission system in ferti seed drills are: a) China-sprocket and gears b) Gears and belt pulleys c) Belt pulleys and cams d) Belt pulleys and chain sprocket

Description : The commonly used power transmission system in ferti seed drills are: a) China-sprocket and gears b) Gears and belt pulleys c) Belt pulleys and cams d) Belt pulleys and chain sprocket

Last Answer : d) Belt pulleys and chain sprocket

Permeability of soil varies a) Inversely as square of grain size b) Inversely as grain size c) Directly as grain size d) Square of grain size*

Description : Permeability of soil varies a) Inversely as square of grain size b) Inversely as grain size c) Directly as grain size d) Square of grain size*

Last Answer : d) Square of grain size*

Loading capacity of chain drive system is based on a) Rate of wear b) Ultimate strength of chain material c) None of (a) and (b) d) Both (a) and (b)

Description : Loading capacity of chain drive system is based on a) Rate of wear b) Ultimate strength of chain material c) None of (a) and (b) d) Both (a) and (b)

Last Answer : a) Rate of wear

The train runs faster on BG than on MG rail because its speed is directly proportional to a) Weight of the train* b) Gauge width c)Policy of Railway Board d) Length of the train

Description : The train runs faster on BG than on MG rail because its speed is directly proportional to a) Weight of the train* b) Gauge width c)Policy of Railway Board d) Length of the train

Last Answer : a) Weight of the train*

How do you measure the dimension of chain sprocket?

Description : How do you measure the dimension of chain sprocket?

Last Answer : External diameter, internal diameter, and tooth count.

Income and consumption are : (1) inversely related (2) directly related (3) partially related (4) unrelated.

Description : Income and consumption are : (1) inversely related (2) directly related (3) partially related (4) unrelated.

Last Answer : (2) directly related Explanation: Consumption and income arc directly or positively related. An increase in income is associated with an increase in income; a decrease in consumption accompanies a decrease in income.

The demand curve shows that price and quantity demanded are - (1) directly related only (2) directly proportional and also directly related (3) inversely proportional and aslo inversely related (4) inversely related only

Description : The demand curve shows that price and quantity demanded are - (1) directly related only (2) directly proportional and also directly related (3) inversely proportional and aslo inversely related (4) inversely related only

Last Answer : (3) inversely proportional and aslo inversely related Explanation: Law of demand states that consumers buy more of a good when its price is lower and less when its price is higher. It states that ... good demanded by the consumer will be negatively correlated to the change in the price of the good.

Resultant force acting on object and rate of change of linear momentum are A. inversely related B. not related at all C. directly related D. directly proportional

Description : Resultant force acting on object and rate of change of linear momentum are A. inversely related B. not related at all C. directly related D. directly proportional

Last Answer : directly related

Extension and applied force are A. directly proportional B. inversely proportional C. are independent of each otherD. inversely related

Description : Extension and applied force are A. directly proportional B. inversely proportional C. are independent of each other D. inversely related

Last Answer : inversely related

capacitance and charge on plates are A. inversely related B. directly related C. not related at all D. always equal

Description : capacitance and charge on plates are A. inversely related B. directly related C. not related at all D. always equal

Last Answer : directly related

Hooke's law states that stress and strain are (A) Directly proportional (B) Inversely proportional (C) Curvilinearly related (D) None of these

Description : Hooke's law states that stress and strain are (A) Directly proportional (B) Inversely proportional (C) Curvilinearly related (D) None of these

Last Answer : (A) Directly proportional

Stress in a beam due to simple bending, is (A) Directly proportional (B) Inversely proportional (C) Curvilinearly related (D) None of these

Description : Stress in a beam due to simple bending, is  (A) Directly proportional  (B) Inversely proportional  (C) Curvilinearly related  (D) None of these 

Last Answer : (A) Directly proportional 

Column efficiency is measured in terms of number of theoretical plates, which is: A. Inversely related to height equivalent to theoretical plates B. Directly related to the peak width C. Directly related to height equivalent to theoretical plates D. Inversely related to the peak width

Description : Column efficiency is measured in terms of number of theoretical plates, which is: A. Inversely related to height equivalent to theoretical plates B. Directly related to the peak width C. Directly related to height equivalent to theoretical plates D. Inversely related to the peak width

Last Answer : Inversely related to height equivalent to theoretical plates 

Income and consumption are : (1) inversely related (2) directly related (3) partially related (4) unrelated.

Description : Income and consumption are : (1) inversely related (2) directly related (3) partially related (4) unrelated.

Last Answer : directly related

The demand curve shows that price and quantity demanded are (1) directly related only (2) directly proportional and also directly related (3) inversely proportional and aslo inversely related (4) inversely related only

Description : The demand curve shows that price and quantity demanded are (1) directly related only (2) directly proportional and also directly related (3) inversely proportional and aslo inversely related (4) inversely related only

Last Answer :  inversely proportional and aslo inversely related

The frequency of vibration of a stretched string is _______ its length. (a) Directly proportional to (b) Inversely proportional to (c) Directly proportional to the square of (d) Independent of

Description : The frequency of vibration of a stretched string is _______ its length. (a) Directly proportional to (b) Inversely proportional to (c) Directly proportional to the square of (d) Independent of

Last Answer : Ans:(b)

The resistance of a conductor varies _____________. A. directly as its length and inversely as its cross-sectional area B. inversely as its length and directly as its cross-sectional area C. directly as its length and directly as its cross-sectional area D. inversely as its length and inversely as its cross-sectional area

Description : The resistance of a conductor varies _____________. A. directly as its length and inversely as its cross-sectional area B. inversely as its length and directly as its cross-sectional area C. directly ... as its cross-sectional area D. inversely as its length and inversely as its cross-sectional area

Last Answer : Answer: A

The energy loss over a length of pipeline according to Darcy-Weisbach equation for pipe flow is ___________ the mean velocity of flow. (A) Directly proportional to (B) Directly proportional to square of (C) Inversely proportional to (D) Inversely proportional to square of

Description : The energy loss over a length of pipeline according to Darcy-Weisbach equation for pipe flow is ___________ the mean velocity of flow. (A) Directly proportional to (B) Directly proportional to square of (C) Inversely proportional to (D) Inversely proportional to square of

Last Answer : (B) Directly proportional to square of

The deflection of any rectangular beam simply supported, is (A) Directly proportional to its weight (B) Inversely proportional to its width (C) Inversely proportional to the cube of its depth (D) Directly proportional to the cube of its length

Description : The deflection of any rectangular beam simply supported, is (A) Directly proportional to its weight (B) Inversely proportional to its width (C) Inversely proportional to the cube of its depth (D) Directly proportional to the cube of its length

Last Answer : (C) Inversely proportional to the cube of its depth

The coherence length over which there is a strong relationship between amplitudes is; (A) Directly proportional to the bandwidth (B) Inversely proportional to the bandwidth (C) The square of the bandwidth (D) None of these

Description : The coherence length over which there is a strong relationship between amplitudes is; (A) Directly proportional to the bandwidth (B) Inversely proportional to the bandwidth (C) The square of the bandwidth (D) None of these

Last Answer : Answer: Option B

The Reynold's number of a ship is __________ to its velocity and length. (A) Directly proportional (B) Inversely proportional (C) Square root of velocity (D) None of these

Description : The Reynold's number of a ship is __________ to its velocity and length. (A) Directly proportional (B) Inversely proportional (C) Square root of velocity (D) None of these

Last Answer : Answer: Option A

The intensity of pressure at any point, in a liquid, is (A) Directly proportional to the area of the vessel containing liquid (B) Directly proportional to the depth of liquid from the surface (C) Directly proportional to the length of the vessel containing liquid (D) Inversely proportional to the depth of liquid from the surface

Description : The intensity of pressure at any point, in a liquid, is (A) Directly proportional to the area of the vessel containing liquid (B) Directly proportional to the depth of liquid from the ... length of the vessel containing liquid (D) Inversely proportional to the depth of liquid from the surface

Last Answer : Answer: Option B

Formula for average service life of belt at a given speed is a) Life(hrs)= [ Belt length (mm)/ Total fatique rates]*100 b) Life(hrs)=[Total fatique rates / Belt length (mm)]*100 c) Life(hrs)=[Belt length (m)/ Total fatique rates]*100 d) None of the above

Description : Formula for average service life of belt at a given speed is a) Life(hrs)= [ Belt length (mm)/ Total fatique rates]*100 b) Life(hrs)=[Total fatique rates / Belt length (mm)]*100 c) Life(hrs)=[Belt length (m)/ Total fatique rates]*100 d) None of the above

Last Answer : a) Life(hrs)= [ Belt length (mm)/ Total fatique rates]*100

For a specific centrifugal air blower operating at constant speed & capacity, the power requirement and pressure vary (A) Directly as square of gas density (B) Directly as gas density (C) Directly as square root of gas density (D) Inversely as gas density

Description : For a specific centrifugal air blower operating at constant speed & capacity, the power requirement and pressure vary (A) Directly as square of gas density (B) Directly as gas density (C) Directly as square root of gas density (D) Inversely as gas density

Last Answer : (B) Directly as gas density

. The pressure and power requirement of a gas fan at constant speed & capacity varies __________ the gas density. (A) Directly as (B) Inversely as square root of (C) Inversely as (D) As square of

Description : . The pressure and power requirement of a gas fan at constant speed & capacity varies __________ the gas density. (A) Directly as (B) Inversely as square root of (C) Inversely as (D) As square of

Last Answer : (A) Directly as

Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False

Description : Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False

Last Answer : A. True

Explain Bicycle Rear Wheel Sprocket Working?

Description : Explain Bicycle Rear Wheel Sprocket Working?

Last Answer : Rear wheel sprocket works under the principle of ratchet and pawl.

Permissible wear of web & foot of rail due to corrosion is:- (a) 15 mm. (b) 1.5 mm.* (c) 0.5 mm. (d) 2.5 mm.

Description : Permissible wear of web & foot of rail due to corrosion is:- (a) 15 mm. (b) 1.5 mm.* (c) 0.5 mm. (d) 2.5 mm.

Last Answer : (b) 1.5 mm

Vertical wear permissible for 60kg/90UTS. rails is:- (a) 23 mm. (b) 10 mm. (c) 13 mm.* (d) 15 mm.

Description : Vertical wear permissible for 60kg/90UTS. rails is:- (a) 23 mm. (b) 10 mm. (c) 13 mm.* (d) 15 mm.

Last Answer : (c) 13 mm.

Minimum permissible vertical wear on nose of a 52 kg CMS crossing on Rajdhani route is i) 6mm ii) 8mm* iii) 10mm iv) 12 mm

Description : Minimum permissible vertical wear on nose of a 52 kg CMS crossing on Rajdhani route is i) 6mm ii) 8mm* iii) 10mm iv) 12 mm

Last Answer : ii) 8mm*

Let the only force acting on two bodies be their mutual interactions. If both bodies start from rest, the distances travelled by each will be a a.proportional to the respective masses of the bodies b.107 dynes c.inversely proportional to the respective masses of the bodies d.directly proportional to the square of the respective masses of the bodies e.inversely proportional to the square of the respective masses of the bodies

Description : Let the only force acting on two bodies be their mutual interactions. If both bodies start from rest, the distances travelled by each will be a a.proportional to the respective masses of the ... masses of the bodies e.inversely proportional to the square of the respective masses of the bodies

Last Answer : c. inversely proportional to the respective masses of the bodies

The shear stress between the two liquid layers is __________ proportional to the distance between two layers(A) Directly (B) Inversely (C) Both A and B (D) None of these .

Description : The shear stress between the two liquid layers is __________ proportional to the distance between two layers. (A) Directly (B) Inversely (C) Both A and B (D) None of these

Last Answer : Answer: Option B

In India soils are classified by a) MIT classification b) Unified soil classification system* c) International classification system d) Particle size classification

Description : In India soils are classified by a) MIT classification b) Unified soil classification system* c) International classification system d) Particle size classification

Last Answer : b) Unified soil classification system*

Number of Elastic clips used for one K to BG single line section having 13 length & concrete sleepers of M+7 sleeper density are (a) 5280 (b) 6160* (c) 6250 (d) 6500

Description : Number of Elastic clips used for one K to BG single line section having 13 length & concrete sleepers of M+7 sleeper density are (a) 5280 (b) 6160* (c) 6250 (d) 6500

Last Answer : (b) 6160*

In case of septic tank, the length (L) to width (B) ratio is generally (a ) L = 3 B* (b) L = 5 B (c) L = 1.5 B (d) L = B

Description : In case of septic tank, the length (L) to width (B) ratio is generally (a ) L = 3 B* (b) L = 5 B (c) L = 1.5 B (d) L = B

Last Answer : (a ) L = 3 B*

The amplitude of a wave is ______. (i) the distance the wave moves in one second (ii). the distance the wave moves in one time period of the wave (iii) the maximum distance moved by the medium particles on either side of the mean position* (iv) the distance equal to one wave length

Description : The amplitude of a wave is ______. (i) the distance the wave moves in one second (ii). the distance the wave moves in one time period of the wave (iii) the maximum distance moved by the medium particles on either side of the mean position* (iv) the distance equal to one wave length

Last Answer : iii) the maximum distance moved by the medium particles on either side of the mean position*

In case of compaction of soil by sheep foot roller maximum thickness of layer should not exceed buy more than -------------- centimeter of length of their teeth a) 5 centimeter* b) 4 centimeter c) 3 centimeter d) 2 centimeter

Description : In case of compaction of soil by sheep foot roller maximum thickness of layer should not exceed buy more than -------------- centimeter of length of their teeth a) 5 centimeter* b) 4 centimeter c) 3 centimeter d) 2 centimeter

Last Answer : a) 5 centimeter*

In LWR track on BG a) Level crossing should be separated by providing SEJs b) Level crossing cannot be provided in LWR. c) Level crossing should not fall within the breathing length of LWR* d) Level crossing should be laid with rail free fastenings.

Description : In LWR track on BG a) Level crossing should be separated by providing SEJs b) Level crossing cannot be provided in LWR. c) Level crossing should not fall within the breathing length of LWR* d) Level crossing should be laid with rail free fastenings.

Last Answer : c) Level crossing should not fall within the breathing length of LWR*

Minimum length of check rail for square crossing shall be -------- more than the width of gate a) 1 meters b) 2 meters* c) 3 meters d) 5 meters

Description : Minimum length of check rail for square crossing shall be -------- more than the width of gate a) 1 meters b) 2 meters* c) 3 meters d) 5 meters

Last Answer : b) 2 meters*

Length of bridge timber in BG a) outer to outer of girder plus 305mm b) 2440mm c) whichever is more in a) & b)* d) whichever is less in a) & b)

Description : Length of bridge timber in BG a) outer to outer of girder plus 305mm b) 2440mm c) whichever is more in a) & b)* d) whichever is less in a) & b)

Last Answer : c) whichever is more in a) & b)*

Minimum length of steel channel sleeper in BG a) 2500mm b) 2440mm* c) 2400mm d) 2600mm

Description : Minimum length of steel channel sleeper in BG a) 2500mm b) 2440mm* c) 2400mm d) 2600mm

Last Answer : b) 2440mm*

The danger level should be marked with a bright red band …… wide centrally over a white band …… wide for a length of……… a) 5 cm, 10 cm, 60 cms* b) 10 cm, 20 cm, 60 cm c) 15 cm, 30 mm, 60 cm d) None of the above

Description : The danger level should be marked with a bright red band …… wide centrally over a white band …… wide for a length of……… a) 5 cm, 10 cm, 60 cms* b) 10 cm, 20 cm, 60 cm c) 15 cm, 30 mm, 60 cm d) None of the above

Last Answer : a) 5 cm, 10 cm, 60 cms*

Length of guard rails to be bent so as to be brought together at the middle of the track.(L2) a) 3200 mm b) 4875 mm* c) 3655 mm d) None of the above

Description : Length of guard rails to be bent so as to be brought together at the middle of the track.(L2) a) 3200 mm b) 4875 mm* c) 3655 mm d) None of the above

Last Answer : b) 4875 mm*

In cement pressure grouting G.I pipes of diameter …… and ……length, should be fixed in drilled holes a) 12 to 20 mm, 200 mm* b) 12 to 20 mm, 300 mm c) 12 to 25 mm, 500 mm d) 20 to 25 mm, 300 mm

Description : In cement pressure grouting G.I pipes of diameter …… and ……length, should be fixed in drilled holes a) 12 to 20 mm, 200 mm* b) 12 to 20 mm, 300 mm c) 12 to 25 mm, 500 mm d) 20 to 25 mm, 300 mm

Last Answer : a) 12 to 20 mm, 200 mm*

A bridge is generally specified as “Br. No. 180 (5x9.10m G) at km 345/5-6”. a) Effective Span b) Width of bridge c) Clear Span* d) Overall length of bridge

Description : A bridge is generally specified as “Br. No. 180 (5x9.10m G) at km 345/5-6”. a) Effective Span b) Width of bridge c) Clear Span* d) Overall length of bridge

Last Answer : c) Clear Span*

The length of the countersunk head rivet shank is, when L = length of the rivet, G = length of grip in mm; D = Dia of rivet in mm a) L =G +0.5 D + 1mm for every 4 mm of grip or part thereof * b) b) L =G +0.5 D + 1mm c) L =G +0.5 D d) None of the above

Description : The length of the countersunk head rivet shank is, when L = length of the rivet, G = length of grip in mm; D = Dia of rivet in mm a) L =G +0.5 D + 1mm for every 4 mm of grip or part thereof * b) b) L =G +0.5 D + 1mm c) L =G +0.5 D d) None of the above

Last Answer : a) L =G +0.5 D + 1mm for every 4 mm of grip or part thereof *

he length of the snap head rivet shank is, when L = length of the rivet, G = length of grip in mm; D = Dia of rivet in mm a) L =G +1.5 D + 1mm for every 4 mm of grip or part thereof * b) b) L =G +0.5 D + 1mm c) L =G +0.5 D d) None of the above

Description : he length of the snap head rivet shank is, when L = length of the rivet, G = length of grip in mm; D = Dia of rivet in mm a) L =G +1.5 D + 1mm for every 4 mm of grip or part thereof * b) b) L =G +0.5 D + 1mm c) L =G +0.5 D d) None of the above

Last Answer : a) L =G +1.5 D + 1mm for every 4 mm of grip or part thereof *

Overall length of fan shaped 1 in 12 Turnout a. 39975 mm* b. 41004 mm c. 28613 mm d. None of above

Description : Overall length of fan shaped 1 in 12 Turnout a. 39975 mm* b. 41004 mm c. 28613 mm d. None of above

Last Answer : a. 39975 mm*

32 kmph 11.What is the weight per meter length of 52 kg Rail? a. 54.14 kg b. 50.25 kg c. 51.89 kg* d. 53.85 kg

Description : 32 kmph 11.What is the weight per meter length of 52 kg Rail? a. 54.14 kg b. 50.25 kg c. 51.89 kg* d. 53.85 kg

Last Answer : c. 51.89 kg*

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to