Foam spraying requires special type of nozzle
A. Flat fan nozzle
B. Flooding nozzle
C. Hollow cone nozzle
D. Air aspiring nozzle

1 Answer

Answer :

D. Air aspiring nozzle

Related questions

Description : The nozzle used for chemical spraying of weedicides (a) hollow cone nozzle (b) solid cone nozzle (c) flat fan nozzle (d) flooding nozzle

Last Answer : (c) flat fan nozzle

Description : Spary angle for fan nozzle and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Last Answer : c) 60-95

Description : Spray Angle for fan nozzles and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Last Answer : c) 60-95

Description : is the types of nozzle used in sprayers a) Hollow cone type of nozzle b) Solid cone type nozzle c) Fan type nozzle d) All of the above

Last Answer : All of the above

Description : Flooding nozzle have spray angle a) 100-150 b) 90-100 c) 60-95 d) 30-45

Last Answer : a) 100-150

Description : nozzle which forms narrow elliptical spray pattern. a) Hollow cone nozzle b) Hard cone nozzle c) Solid cone nozzle d) Fan nozzle

Last Answer : Fan nozzle

Description : swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.

Last Answer : a. Impart rotational motion to the liquid passing through it.

Description : Hollow cone nozzles employed on boom type of sprayers have spray angle between : A .30-60° B.40-60° C.60-95° D.100-150°

Last Answer : C.60-95°

Description : Fan nozzle mostly used for pressure spraying. b. high c. moderate d. None of above

Last Answer : Ans- b. low

Description : .In Hydraulic sprayers, the degree of atomization is primarily a function of A. Liquid pressure and the nozzle characteristics B. Air velocity C. Size of the nozzle D. Size and shape of the atomizer

Last Answer : A. Liquid pressure and the nozzle characteristics

Description : In hydraulic sprayers, the degree is primarily a function of: a) Liquid pressure and the nozzle characteristics b) Air velocity c) Size of the nozzle d) Shape and size of the atomizer

Last Answer : a) Liquid pressure and the nozzle characteristics

Description : Nozzle spacing on boom is governed by a.) Type of spray b.) Height of crops c.) Density of crop d.) All of the above

Last Answer : d.) All of the above

Description : In sprayers , operating pressures below ___________Kpa are undesirable for hydraulic nozzles other than flooding type

Last Answer : 140

Description : Application rate of sprayer is affected by a. forward of speed b. number of nozzle c. rate of discharge d. all of the above

Last Answer : d. all of the above

Description : Flow rates of particular nozzle is directly proportional to a. square root of pressure b. orifice area c. Both (a) and (B) d. none of the above

Last Answer : c. Both (a) and (B)

Description : Injection pressure of fuel nozzle in diesel engine is a) 30-45 kg/cm2 b) 50-100 kg/cm2 c) 120-200 kg/cm2 d) 200 kg/cm2

Last Answer : c) 120-200 kg/cm2

Description : In electrostatic spraying the total volume of liquid to be sprayed over one Hectare is a.100 litres

Last Answer : a.

Description : The amount of liquid required for spraying of plantation crops is : a.) 200-400L/ha b.) 400-600L/ha c.) 600-800L/ha d.) 1000-1200L/ha

Last Answer : d.) 1000-1200L/ha

Description : he amount of liquid required for ground spraying of agricultural crops is : a.) 400-600L/ha b.) 200-400L/ha c.) 1000-2000L/ha d.) 600-800L/ha

Last Answer : a.) 400-600L/ha

Description : Flooding nozzles are generally operated with (a) Axis vertical (b) Axis horizontal (c) Inclined (d) None of the above

Last Answer : (a) Axis vertical

Description : A flat fan nozzle is suitable for a) Foliage spray b) Insect control c) Spot spray d) Herbicide spray

Last Answer : ans d

Description : Farming operation which requires maximum energy a.) Sowing b.) Interculture c.) Tillage d.) Harvesting

Last Answer : c.) Tillage

Description : One of the main advantages of disc brakes over drum brakes is that the disc brake : U. Can stop a vehicle in a shorter distance V. Is more heat resistant W. Weighs less than drum brakes X. Requires less pedal force to stop the vehicle

Last Answer : . Requires less pedal force to stop the vehicle

Description : Flat planting predominates where a) Nature moisture content is favourable b) Rainfall is high to provide surface drainage c) Semi arid areas to conserve moisture d) None of the above

Last Answer : a) Nature moisture content is favourable

Description : Flat bat reels are widely used because :- a) This works well in lodged crop b) This is simpler and less expensive than pick up reels C) This works well in upright crops d) Both (b) and (c)

Last Answer : d) Both (b) and (c)

Description : Fire in fuel gas pipelines is extinguished most effectively by (A) Spraying water (B) Blanketting the area with nitrogen atmosphere (C) Fire fighting foam (D) None of these

Last Answer : Option B

Description : Insulation of liquid surface can be achieved by __________ on top of its surface. (A) Floating hollow polypropylene spheres (B) Spraying alumina powder (C) Putting cement (D) None of these

Last Answer : (A) Floating hollow polypropylene spheres

Description : Hallow cone nozzle – liquid is fed into whirl chamber through entry or through a fixed spiral passage to give rotation motion. a. Axial b. Radial c. tangential. d. None of above

Last Answer : Ans- c. tangential.

Description : It is the part of cone nozzle which imparts rotation to the liquid. b. Cone plate c. Round plate d. None of above

Last Answer : Ans- a. Swirl plate

Description : . Fan nozzle forms narrow. spray pattern. a. large c. Straight. d. None of above

Last Answer : Ans- b. elliptical.

Description : In the natural draft cooling tower_________ is not required a) Fan b) tower c) Nozzle d) none of the above

Last Answer : Fan

Description : A bus stop is barricaded from the remaining part of the road, by using 50 hollow cones made of recycled cardboard. Each cone has a base diameter of 40 cm and height 1 m. -Maths 9th

Last Answer : Given: Radius of cone, r = diameter/2 = 40/2 cm = 20cm = 0.2 m Height of cone, h = 1m Slant height of cone is l, and l2 = (r2+h2) Using given values, l2 = (0.22+12) = (1.04) Or l ... (32.028 12) = Rs.384.336 = Rs.384.34 (approximately) Therefore, the cost of painting all these cones is Rs. 384.34.

Description : Center of gravity of a thin hollow cone lies on the axis at a height of (A) One-fourth of the total height above base (B) One-third of the total height above base (C) One-half of the total height above base (D) Three-eighth of the total height above the base

Last Answer : (B) One-third of the total height above base

Description : Center of gravity of a thin hollow cone lies on the axis at a height of?

Last Answer : Center of gravity of a thin hollow cone lies on the axis at a height of one-third of the total height above base.

Description : Is it advisable to cool a fin fan by spraying demineralized water on it?

Last Answer : Fin fan has carbon steel tubes with aluminum fins RESPONSE In a similar service, the fin fan suffered external corrosion when spraying it with demin water. The salt and oxygen in the air ... , which should significantly lower the likelihood of cold ambient temperature causing the gas to condense.

Description : Air output of a duster is given by formula a) Q= 60×A×V b)Q= 60×A×(2GH/Y) c) Q= 240×A×h d) all of the above

Last Answer : d) all of the above

Description : The mechanical cleaning of sugar cane is done due to A. The different in the peripheral velocity of rollers B. Rough surface provided Or the outer surface of rollers C. Blow of air which forces the extraneous material out of the machine D. All of the above

Last Answer : D. All of the above

Description : A paddy transplanter uses either root wash type seedlings or __________ seedlings.

Last Answer : soil bearing

Description : Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Last Answer : f. Dried hard soils

Description : power of absorbing type hydraulic dynamometer varies as a) cube of rpm b) fifth power of the diameter c) none of the above d) both (a) and (b)

Last Answer : d) both (a) and (b)

Description : Agitator(propeller or paddle)type for agitating liquid in power sprays have a velocity of a.100-120 rpm b.60-100 rpm c.10-20 rpm d. none of the above

Last Answer : a.100-120 rpm

Description : Axial flow thresher uses a) Raspbar type cylinder b) Serrated disc type c) Spike tooth d) Hammer mill

Last Answer : a) Raspbar type cylinder

Description : In a horizontal plate type planter maximum obtainable value of cell fill is : A.Greater then 100% B.Less than 100% C.200% D.None of the above

Last Answer : A.Greater then 100%

Description : The two types of cylinder used on power wheat threshers are: a) Serrated disc and rasp bar b) Spike tooth and wire loop type c) Spike tooth and hammer mill d) Hammer mill and flails

Last Answer : c) Spike tooth and hammer mill

Description : Axial flow thresher uses a) Raspbar type cylinder b) Serrated disc type cylinder c) Spike tooth d) Hammer mill

Last Answer : a) Raspbar type cylinder

Description : The type of restrained three point linkage system in which the depth of implement is automatically adjusted to maintain a pre selected constant draft is called : E. Automatic draft control system F. Precision control system G. Depth control system H. None of the above

Last Answer : E. Automatic draft control system

Description : The type of bearing generally used to support the discs on a standard disc plough is: A. Ball bearing. B. Tapered roller bearing. C. Plain roller bearing. D. Bush bearing.

Last Answer : B. Tapered roller bearing.

Description : How type furrow (or shovel) opener are especially suited to a. Stoney and root infested fields b. Poorly prepared beds in trashy soil c. Hard field with considerable debris and mulch d. None of the above

Last Answer : a. Stoney and root infested fields

Description : Most commonly used for the metering mechanism for fertilizer a. Spur wheel b. Serrated wheel c. Star wheel d. Auger type

Last Answer : a. Spur wheel

Description : Juice extraction capacity of vertical three roller type bullock down sugercane crusher E. 50-70% F. 70-90% G. 90-100% H. 30-50%

Last Answer : E. 50-70%