Injection pressure of fuel nozzle in diesel engine is a) 30-45 kg/cm2 b) 50-100 kg/cm2 c) 120-200 kg/cm2 d) 200 kg/cm2

Injection pressure of fuel nozzle in diesel engine is
a) 30-45 kg/cm2
b) 50-100 kg/cm2
c) 120-200 kg/cm2
d) 200 kg/cm2
by

1 Answer

Answer :

c) 120-200 kg/cm2
by

Related questions

Compression pressure in diesel engine cylinder is a) 6-10 kg/cm2 b) 10-20 kg/cm2 c) 20-35 kg/cm2 d) None of the above

Description : Compression pressure in diesel engine cylinder is a) 6-10 kg/cm2 b) 10-20 kg/cm2 c) 20-35 kg/cm2 d) None of the above

Last Answer : c) 20-35 kg/cm2

The injection pressure of ic engine used on tractors is in range of kg/cm2 1. 0-6 2. 60-120 3. 120-200 4. 200-300

Description : The injection pressure of ic engine used on tractors is in range of kg/cm2 1. 0-6 2. 60-120 3. 120-200 4. 200-300

Last Answer : ans 3

Flooding nozzle have spray angle a) 100-150 b) 90-100 c) 60-95 d) 30-45

Description : Flooding nozzle have spray angle a) 100-150 b) 90-100 c) 60-95 d) 30-45

Last Answer : a) 100-150

Compression pressure in petrol engine cylinder is a) 6-10 kg/cm2 b) 10-20 kg/cm2 c) 20-35 kg/cm2 d) 35-40 kg/cm2

Description : Compression pressure in petrol engine cylinder is a) 6-10 kg/cm2 b) 10-20 kg/cm2 c) 20-35 kg/cm2 d) 35-40 kg/cm2

Last Answer : a) 6-10 kg/cm2

The fuel in diesel engine is normally injected at pressure of a. 5-10 kg/cm2 b. 20-25 kg/cm2 c 60-80 kg/cm2 d. 90-130 kg/cm2

Description : The fuel in diesel engine is normally injected at pressure of a. 5-10 kg/cm2 b. 20-25 kg/cm2 c 60-80 kg/cm2 d. 90-130 kg/cm2

Last Answer : ANSWER d. 90-130 kg/cm2

Spary angle for fan nozzle and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Description : Spary angle for fan nozzle and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Last Answer : c) 60-95

Spray Angle for fan nozzles and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Description : Spray Angle for fan nozzles and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Last Answer : c) 60-95

The pressure (kg/cm2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively (A) 10 and 120 (B) 1 and 200 (C) 50 and 250 (D) 10 and 300

Description : The pressure (kg/cm2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively (A) 10 and 120 (B) 1 and 200 (C) 50 and 250 (D) 10 and 300

Last Answer : (B) 1 and 200

A traction fitted with diesel engine will have good slogging ability as lugging ability if it has a reserve of a.500 rpm d.200 rpm c.300 rpm e.1000 rpm

Description : A traction fitted with diesel engine will have good slogging ability as lugging ability if it has a reserve of a.500 rpm d.200 rpm c.300 rpm e.1000 rpm

Last Answer : a.500 rpm

iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above

Description : iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above

Last Answer : ∙ Torque is a function of thermal efficiency

Hand operated sprayer are operated at a pressure (kg/cm2) a) 1-7 b) 7-10 c)10-20 d) 20-55

Description : Hand operated sprayer are operated at a pressure (kg/cm2) a) 1-7 b) 7-10 c)10-20 d) 20-55

Last Answer : a) 1-7

Operating pressure of power operated sprayer E. 1-7 kg/cm2 F. 10-20 kg/cm2+ G. 20-55 kg/cm2 H. >55 kg/cm2

Description : Operating pressure of power operated sprayer E. 1-7 kg/cm2 F. 10-20 kg/cm2+ G. 20-55 kg/cm2 H. >55 kg/cm2

Last Answer : G. 20-55 kg/cm2

Operating pressure of the hand operated sprayer is E. 20-55 kg/cm2 F. 1-7 kg/cm2 G. 10-20 kg/cm2 H. >55 kg/cm2

Description : Operating pressure of the hand operated sprayer is E. 20-55 kg/cm2 F. 1-7 kg/cm2 G. 10-20 kg/cm2 H. >55 kg/cm2

Last Answer : F. 1-7 kg/cm2

ears commonly used on fuel injection pumps are a. Spur gears b. helical gears c. rack and pinion d. spiral gears

Description : ears commonly used on fuel injection pumps are a. Spur gears b. helical gears c. rack and pinion d. spiral gears

Last Answer : c. rack and pinion

gnition delay is defined as the A)time between start of fuel injection and ignition of fuel B)time between end of fuel injection and ignition of fuel C)time between start of ignition and tdc D)time between completion of ignition and bdc

Description : gnition delay is defined as the A)time between start of fuel injection and ignition of fuel B)time between end of fuel injection and ignition of fuel C)time between start of ignition and tdc D)time between completion of ignition and bdc

Last Answer : A)time between start of fuel injection and ignition of fuel

.In Hydraulic sprayers, the degree of atomization is primarily a function of A. Liquid pressure and the nozzle characteristics B. Air velocity C. Size of the nozzle D. Size and shape of the atomizer

Description : .In Hydraulic sprayers, the degree of atomization is primarily a function of A. Liquid pressure and the nozzle characteristics B. Air velocity C. Size of the nozzle D. Size and shape of the atomizer

Last Answer : A. Liquid pressure and the nozzle characteristics

Flow rates of particular nozzle is directly proportional to a. square root of pressure b. orifice area c. Both (a) and (B) d. none of the above

Description : Flow rates of particular nozzle is directly proportional to a. square root of pressure b. orifice area c. Both (a) and (B) d. none of the above

Last Answer : c. Both (a) and (B)

In hydraulic sprayers, the degree is primarily a function of: a) Liquid pressure and the nozzle characteristics b) Air velocity c) Size of the nozzle d) Shape and size of the atomizer

Description : In hydraulic sprayers, the degree is primarily a function of: a) Liquid pressure and the nozzle characteristics b) Air velocity c) Size of the nozzle d) Shape and size of the atomizer

Last Answer : a) Liquid pressure and the nozzle characteristics

The estimated useful life of diesel engine is: A)8 years b)10 years C)12 years d)14years

Description : The estimated useful life of diesel engine is: A)8 years b)10 years C)12 years d)14years

Last Answer : b)10 years

GOOD EARTH is one of the important make of (A) tractor (B) electric motor (C) diesel engine (D)power tiller

Description : GOOD EARTH is one of the important make of (A) tractor (B) electric motor (C) diesel engine (D)power tiller

Last Answer : A) tractor

40 optimum working temperature for diesel engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c

Description : 40 optimum working temperature for diesel engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c

Last Answer : ∙ 88-90°c

onstant speed governors are used on ∙ Tractor engine diesel ∙ Stationary diesel engine ∙ Petrol engine ∙ None of the above

Description : onstant speed governors are used on ∙ Tractor engine diesel ∙ Stationary diesel engine ∙ Petrol engine ∙ None of the above

Last Answer : Stationary diesel engine

variable speed governors are used on ∙ Tractor engine(diesel) ∙ Stationary engine (diesel) ∙ Petrol engine ∙ None of the above

Description : variable speed governors are used on ∙ Tractor engine(diesel) ∙ Stationary engine (diesel) ∙ Petrol engine ∙ None of the above

Last Answer : ∙ Tractor engine(diesel)

High speed diesel A) is used on high speed engine B) has lower fule value then l.s.d per litre. C)both (a) & (b) D)none of the above

Description : High speed diesel A) is used on high speed engine B) has lower fule value then l.s.d per litre. C)both (a) & (b) D)none of the above

Last Answer : C)both (a) & (b)

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

Steam pressures usually used in thermal power plants are (A) 5 kg/cm2 to 10 kg / cm2 (B) 50 kg/cm2 to 100 kg / cm2 (C) 110 kg/cm2 to 170 kg / cm2 (D) 200 kg/cm2 to 215 kg / cm2

Description : Steam pressures usually used in thermal power plants are (A) 5 kg/cm2 to 10 kg / cm2 (B) 50 kg/cm2 to 100 kg / cm2 (C) 110 kg/cm2 to 170 kg / cm2 (D) 200 kg/cm2 to 215 kg / cm2

Last Answer : Ans: C

If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm(C) 150 cm (D) 200 cm

Description : If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm (C) 150 cm (D) 200 cm

Last Answer : Answer: Option C

Application rate of sprayer is affected by a. forward of speed b. number of nozzle c. rate of discharge d. all of the above

Description : Application rate of sprayer is affected by a. forward of speed b. number of nozzle c. rate of discharge d. all of the above

Last Answer : d. all of the above

swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.

Description : swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.

Last Answer : a. Impart rotational motion to the liquid passing through it.

The nozzle used for chemical spraying of weedicides (a) hollow cone nozzle (b) solid cone nozzle (c) flat fan nozzle (d) flooding nozzle

Description : The nozzle used for chemical spraying of weedicides (a) hollow cone nozzle (b) solid cone nozzle (c) flat fan nozzle (d) flooding nozzle

Last Answer : (c) flat fan nozzle

Nozzle spacing on boom is governed by a.) Type of spray b.) Height of crops c.) Density of crop d.) All of the above

Description : Nozzle spacing on boom is governed by a.) Type of spray b.) Height of crops c.) Density of crop d.) All of the above

Last Answer : d.) All of the above

Foam spraying requires special type of nozzle A. Flat fan nozzle B. Flooding nozzle C. Hollow cone nozzle D. Air aspiring nozzle

Description : Foam spraying requires special type of nozzle A. Flat fan nozzle B. Flooding nozzle C. Hollow cone nozzle D. Air aspiring nozzle

Last Answer : D. Air aspiring nozzle

In a 4 S diesel engine, the term ‘squish’ refers to the (a) Injection of fuel in the precombustion chamber (b) Discharge of gases from the precombustion chamber (c) Entry of air into the combustion chamber (d) Stripping of fuel from the core

Description : In a 4 S diesel engine, the term ‘squish’ refers to the (a) Injection of fuel in the precombustion chamber (b) Discharge of gases from the precombustion chamber (c) Entry of air into the combustion chamber (d) Stripping of fuel from the core

Last Answer : Ans :c

Mixing of air and fuel in the diesel engine occurs in a. injection pump b. carburetor c. engine cylinder d. inlet manifold

Description : Mixing of air and fuel in the diesel engine occurs in a. injection pump b. carburetor c. engine cylinder d. inlet manifold

Last Answer : ANSWER c. engine cylinder

List any two major requirements of fuel injection system. Draw a layout of fuel injection system used in diesel engine.

Description : List any two major requirements of fuel injection system. Draw a layout of fuel injection system used in diesel engine.

Last Answer : Requirements of fuel injection system 1) Metering - The fuel injection system must measure the fuel supplied to the engine very accurately as fuel requirements vary from low to high engine speeds. 2) Time- ... and stop injection- The injection fuel must start and end quickly.  OR

Draw a layout of fuel injection system in CRDI diesel engine. State its fundamental requirement.

Description : Draw a layout of fuel injection system in CRDI diesel engine. State its fundamental requirement.

Last Answer : Fundamental requirement:-The line diagram of CRDI shows that the system is controlled by ECU. The sensors in the system are used to feed the input in the ECU.ECU will provide the signal ... fuel injector, common rail, High pressure fuel pump, ECM/ECU, Pressure sensor, Rail pressure limiter. 

Stroke bore ratio for tractor engine is (a) 1.25 (b) 1.45 (c) 1.75 (d) 2.00

Description : Stroke bore ratio for tractor engine is (a) 1.25 (b) 1.45 (c) 1.75 (d) 2.00

Last Answer : (a) 1.25

Weight per unit of drawbar power is generally ranges between a)50-120kg/kw b)120-150kg/kw c)150-250kg/kw d)250-300kg/kw

Description : Weight per unit of drawbar power is generally ranges between a)50-120kg/kw b)120-150kg/kw c)150-250kg/kw d)250-300kg/kw

Last Answer : a)50-120kg/kw

Agitator(propeller or paddle)type for agitating liquid in power sprays have a velocity of a.100-120 rpm b.60-100 rpm c.10-20 rpm d. none of the above

Description : Agitator(propeller or paddle)type for agitating liquid in power sprays have a velocity of a.100-120 rpm b.60-100 rpm c.10-20 rpm d. none of the above

Last Answer : a.100-120 rpm

XYZ Ltd. issued 10,000 shares of Rs. 100 each at Rs. 120 per share with Rs. 25 on application, Rs. 45 on allotment including premium, Rs. 20 on first call and Rs. 30 on final call. Govind who held 200 shares did not pay any call money and his shares were forfeited. What is the amount to be credited to Share Forfeiture Account on forfeiture ? (A) Rs. 14,000 (B) Rs. 10,000 (C) Rs. 9,000 (D) Rs. 4,000

Description : XYZ Ltd. issued 10,000 shares of Rs. 100 each at Rs. 120 per share with Rs. 25 on application, Rs. 45 on allotment including premium, Rs. 20 on first call and Rs. 30 on final call. Govind who held 200 shares did not pay ... forfeiture ? (A) Rs. 14,000 (B) Rs. 10,000 (C) Rs. 9,000 (D) Rs. 4,000

Last Answer : Answer: Rs. 10,000

The minimum compressive strength of 1st class bricks should be (A) 75 kg/cm2 (B) 90 kg/cm2 (C) 100 kg/cm2 (D) 120 kg/cm2

Description : The minimum compressive strength of 1st class bricks should be (A) 75 kg/cm2 (B) 90 kg/cm2 (C) 100 kg/cm2 (D) 120 kg/cm2

Last Answer : Answer: Option C

The minimum compressive strength of 2nd class bricks should be (A) 75 kg/cm2 (B) 90 kg/cm2 (C) 100 kg/cm2 (D) 120 kg/cm

Description : The minimum compressive strength of 2nd class bricks should be (A) 75 kg/cm2 (B) 90 kg/cm2 (C) 100 kg/cm2 (D) 120 kg/cm

Last Answer : Answer: Option A

subsoilers are operated at maximum depth of: A.30-40cm B.45-75cm C.75-90cm D.10-20cm

Description : subsoilers are operated at maximum depth of: A.30-40cm B.45-75cm C.75-90cm D.10-20cm

Last Answer : B.45-75cm

Formula for established plant to the seed sown based on the delivery rate (kg/ha) is A. CI=[(E×10000) /(D×W) ]×100 B. CI=[E/(N+E) ]×100 C. Both (A) and (B) D. None of (A) and (B)

Description : Formula for established plant to the seed sown based on the delivery rate (kg/ha) is A. CI=[(E×10000) /(D×W) ]×100 B. CI=[E/(N+E) ]×100 C. Both (A) and (B) D. None of (A) and (B)

Last Answer : A. CI=[(E×10000) /(D×W) ]×100

Recommended capacity of the seed box or hopper for tractor mounted (large size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Description : Recommended capacity of the seed box or hopper for tractor mounted (large size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Last Answer : d. 200-300 lit

Recommended capacity of the seed box or hopper for tractor mounted(small size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Description : Recommended capacity of the seed box or hopper for tractor mounted(small size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Last Answer : c. 100-150 lit

Recommended capacity of the seed box or hopper for animal drawn is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Description : Recommended capacity of the seed box or hopper for animal drawn is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Last Answer : b. 10-60 lit

Recommended capacity of the seed box or hopper for manually operated seeder is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Description : Recommended capacity of the seed box or hopper for manually operated seeder is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Last Answer : a. 2-10 lit

high pressure boiler generates steam at a pressure greater than __________ kg/cm2. (A) 10 (B) 30 (C) 50 (D) 80

Description : high pressure boiler generates steam at a pressure greater than __________ kg/cm2. (A) 10 (B) 30 (C) 50 (D) 80

Last Answer : Option D

Turbo chargers or super chargers increases engine power by A. 10-20% C. 50-60% B. 20-30% D. 90-100%

Description : Turbo chargers or super chargers increases engine power by A. 10-20% C. 50-60% B. 20-30% D. 90-100%

Last Answer : A. 10-20%