Farming operation which requires maximum energy a.) Sowing b.) Interculture c.) Tillage d.) Harvesting

Farming operation which requires maximum energy  
a.) Sowing b.) Interculture  
c.) Tillage d.) Harvesting
by

1 Answer

Answer :

c.) Tillage
by

Related questions

The ideal moisture content for the soil primary tillage operation a) Upper plastic limit of the soil b) Lower plastic limit c) Wilting Point d) All of the above

Description : The ideal moisture content for the soil primary tillage operation a) Upper plastic limit of the soil b) Lower plastic limit c) Wilting Point d) All of the above

Last Answer : a) Upper plastic limit of the soil

The method of harvesting a crop which leaves the roots and the lower parts of the plant uncut to give the subtle crops is known as - a. Mulching b. Intensive farming c. Ratooning d. Zero tillage farming

Description : The method of harvesting a crop which leaves the roots and the lower parts of the plant uncut to give the subtle crops is known as - a. Mulching b. Intensive farming c. Ratooning d. Zero tillage farming

Last Answer : c. Ratooning

The method of harvesting a crop which leaves the roots and a. MulchingB. Intensive farmingC. RatooningD. Zero tillage farming the lower parts of the plant uncut to give the subtle crops is known as?

Description : The method of harvesting a crop which leaves the roots and the lower parts of the plant uncut to give the subtle crops is known as? a. Mulching B. Intensive farming C. Ratooning D. Zero tillage farming

Last Answer : C. Ratooning

Tillage operation carried out after sowing but before emergence of crop is called as — a. Minimum tillage b. Blind tillage c. Zero tillage d. None of these

Description : Tillage operation carried out after sowing but before emergence of crop is called as — a. Minimum tillage b. Blind tillage c. Zero tillage d. None of these

Last Answer : b. Blind tillage

Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed

Description : Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed

Last Answer : p. For operating on the sides of plant bed

shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Description : shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Last Answer : i. Minimum tillage of trashy land at shallow depths

Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Description : Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Last Answer : f. Dried hard soils

Depth of working of a tillage implement is controlled by a) Furrow Wheel b) Gauge Wheel c) Cage Wheel d) Star Wheel

Description : Depth of working of a tillage implement is controlled by a) Furrow Wheel b) Gauge Wheel c) Cage Wheel d) Star Wheel

Last Answer : d) Star Wheel

The two primery tillage equipment a. MB plough and disc harrow b. Disc plough and disc harrow c. Disc harrow and cultivetor d. MB plough and subsoiler

Description : The two primery tillage equipment a. MB plough and disc harrow b. Disc plough and disc harrow c. Disc harrow and cultivetor d. MB plough and subsoiler

Last Answer : d. MB plough and subsoiler

A power tiller is relatively more suitable for : A. Puddling of low land paddy fields with a rotary tiller B. Primary tillage of upland paddy fields with a rotary tillers C. Primary tillage with a mould board plough D. Farm transportation work

Description : A power tiller is relatively more suitable for : A. Puddling of low land paddy fields with a rotary tiller B. Primary tillage of upland paddy fields with a rotary tillers C. Primary tillage with a mould board plough D. Farm transportation work

Last Answer : A. Puddling of low land paddy fields with a rotary tiller

he shape of the gross surface of the tillage tool is designated as a) Micro shape c) Edge shape b) Macro shape d) Gross shape

Description : he shape of the gross surface of the tillage tool is designated as a) Micro shape c) Edge shape b) Macro shape d) Gross shape

Last Answer : b) Macro shape

A Tillage implement moving at a constant velocity is subjected to a) Force of gravity b) Soil force (resistance) c) Pull of mower d) All of the above

Description : A Tillage implement moving at a constant velocity is subjected to a) Force of gravity b) Soil force (resistance) c) Pull of mower d) All of the above

Last Answer : d) All of the above

V-shaped sweeps are best suited for a ) Primary tillage b) Stubble mulch tillage c) Rotary tillage d) Minimum tillage

Description : V-shaped sweeps are best suited for a ) Primary tillage b) Stubble mulch tillage c) Rotary tillage d) Minimum tillage

Last Answer : b) Stubble mulch tillage

tractor us used for major operation such as ploughing, harrowing, sowing, harvesting and transporting work. A. Row crop Tractor C. Special purpose tractor B. Crawler tractor D. General purpose tractor

Description : tractor us used for major operation such as ploughing, harrowing, sowing, harvesting and transporting work. A. Row crop Tractor C. Special purpose tractor B. Crawler tractor D. General purpose tractor

Last Answer : General purpose tractor

Interculture operation in groundnut crop should be avoided at

Description : Interculture operation in groundnut crop should be avoided at

Last Answer : Ans.Pegging stage

Harvesting of wheat with bullock drawn reaper and making bundles could require a) 2 persons b) 3 persons c) 4 persons d) 5 person

Description : Harvesting of wheat with bullock drawn reaper and making bundles could require a) 2 persons b) 3 persons c) 4 persons d) 5 person

Last Answer : a) 2 persons

Reaper is used for a.) Plowing b.) Harvesting and threshing. c.) Cutting crops. d.) Cutting and windrow.

Description : Reaper is used for a.) Plowing b.) Harvesting and threshing. c.) Cutting crops. d.) Cutting and windrow.

Last Answer : d.) Cutting and windrow.

owest specific energy requirement for the operation of rotavator is about _______ times as great as a mould board plough working in the same soil. a) Equal b) Twice c) Three d) Four

Description : owest specific energy requirement for the operation of rotavator is about _______ times as great as a mould board plough working in the same soil. a) Equal b) Twice c) Three d) Four

Last Answer : c) Three

One of the main advantages of disc brakes over drum brakes is that the disc brake : U. Can stop a vehicle in a shorter distance V. Is more heat resistant W. Weighs less than drum brakes X. Requires less pedal force to stop the vehicle

Description : One of the main advantages of disc brakes over drum brakes is that the disc brake : U. Can stop a vehicle in a shorter distance V. Is more heat resistant W. Weighs less than drum brakes X. Requires less pedal force to stop the vehicle

Last Answer : . Requires less pedal force to stop the vehicle

Foam spraying requires special type of nozzle A. Flat fan nozzle B. Flooding nozzle C. Hollow cone nozzle D. Air aspiring nozzle

Description : Foam spraying requires special type of nozzle A. Flat fan nozzle B. Flooding nozzle C. Hollow cone nozzle D. Air aspiring nozzle

Last Answer : D. Air aspiring nozzle

An animal drawn seed drill has k number of furrow openers 180mm apart. If the speed of operation is 2.0kmph, the area covered (ha), in 8-11day is given by: A. 1.85/1000k B. 28.8 x 10-2k C. k/6.56 D. 1.762k

Description : An animal drawn seed drill has k number of furrow openers 180mm apart. If the speed of operation is 2.0kmph, the area covered (ha), in 8-11day is given by: A. 1.85/1000k B. 28.8 x 10-2k C. k/6.56 D. 1.762k

Last Answer : B. 28.8 x 10-2k

An animal drawn seed drill has k number of furrow openers 180mm apart. If the speed of the operation is 2.0kmph then the area covered (ha), in 8 hr day is given by: a) 1.85/1000k b) 28.8 * 10-2k c) k/6.456 d) 1.762k

Description : An animal drawn seed drill has k number of furrow openers 180mm apart. If the speed of the operation is 2.0kmph then the area covered (ha), in 8 hr day is given by: a) 1.85/1000k b) 28.8 * 10-2k c) k/6.456 d) 1.762k

Last Answer : b) 28.8 * 10-2k

A power tiller is most suited for : A. Draft operation with rigid tools B. Rotary cultivation C. Stationary operation D. Transport work

Description : A power tiller is most suited for : A. Draft operation with rigid tools B. Rotary cultivation C. Stationary operation D. Transport work

Last Answer : B. Rotary cultivation

ed planting is practiced for row crops in (a) Semi-arid conditions to place seed deep in moist soil (b) High rainfall areas to improve surface drainage (c) Irrigated areas leaving more space for operation of equipments (d) Both (b) and (c)

Description : ed planting is practiced for row crops in (a) Semi-arid conditions to place seed deep in moist soil (b) High rainfall areas to improve surface drainage (c) Irrigated areas leaving more space for operation of equipments (d) Both (b) and (c)

Last Answer : d) Both (b) and (c)

Lister planting or furrow planting is practiced for (a) High rainfall areas to improve surface drainage (b) Semi-arid conditions to place seed deep in moist soil (c) Areas where natural moisture conditions are favourable (d) Irrigated areas leaving more space for operation of equipments

Description : Lister planting or furrow planting is practiced for (a) High rainfall areas to improve surface drainage (b) Semi-arid conditions to place seed deep in moist soil (c) Areas where natural moisture conditions are favourable (d) Irrigated areas leaving more space for operation of equipments

Last Answer : (b) Semi-arid conditions to place seed deep in moist soil

One operation of rotavator dose a job equivalent to a) One ploughing + two harrowing b) One harrowing + two ploughing c) One ploughing only d) One harrowing only

Description : One operation of rotavator dose a job equivalent to a) One ploughing + two harrowing b) One harrowing + two ploughing c) One ploughing only d) One harrowing only

Last Answer : a) One ploughing + two harrowing

349- Pods, heads or ears & freeseeds, lost during the cutting & conveying operation are called as..... (a) Cylinder loss (b) Walker losses ( rack loss) (c) Shoe losses (d) Gathering loss

Description : 349- Pods, heads or ears & freeseeds, lost during the cutting & conveying operation are called as..... (a) Cylinder loss (b) Walker losses ( rack loss) (c) Shoe losses (d) Gathering loss

Last Answer : (d) Gathering loss

Name three cropping seasons of India. Write their sowing and harvesting time and major crops of each season. -Geography 10th

Description : Name three cropping seasons of India. Write their sowing and harvesting time and major crops of each season. -Geography 10th

Last Answer : Rabi, Kharif, and Zaid are the three cropping seasons.I. Rabi crops (Winter crops): These are sown in winter from October to December. Harvested in summer from April to June. Important crops ... parts of the country). Important crops are watermelon, musk melon, cucumber and fodder crops, etc.

Sowing of paddy in January-Feb and harvesting in April-May is called as

Description : Sowing of paddy in January-Feb and harvesting in April-May is called as

Last Answer : Ans.Boro/Summer/Spring

Sowing of paddy in June-July and harvesting in October is called as

Description : Sowing of paddy in June-July and harvesting in October is called as

Last Answer : Ans.Aman/Kharif/Aghani

Sowing of paddy in April-May and harvesting in August-Sept. is called as

Description : Sowing of paddy in April-May and harvesting in August-Sept. is called as

Last Answer : Ans.Aus/Autumn/Pre kharif paddy

Minimum support prices for major agricultural products are fixed by government a. After sowing b. In middle of crop period c. Before start of sowing season d. After harvesting

Description : Minimum support prices for major agricultural products are fixed by government a. After sowing b. In middle of crop period c. Before start of sowing season d. After harvesting

Last Answer : c. Before start of sowing season

What is Relay cropping? a. The following crop is sown before the harvesting of preceding crop b. Repeated sowing of crop in same field c. Growing of two crops simultaneously d. None of these

Description : What is Relay cropping? a. The following crop is sown before the harvesting of preceding crop b. Repeated sowing of crop in same field c. Growing of two crops simultaneously d. None of these

Last Answer : a. The following crop is sown before the harvesting of preceding crop

The process of separation of grains from cut crop after harvesting is known as ________. a) harvesting b)threshing c)winnowing d)sowing

Description : The process of separation of grains from cut crop after harvesting is known as ________. a) harvesting b)threshing c)winnowing d)sowing

Last Answer : b)threshing

The cutting and gathering of crop after maturation is known as _______. a) harvesting b)threshing c)winnowing d)sowing

Description : The cutting and gathering of crop after maturation is known as _______. a) harvesting b)threshing c)winnowing d)sowing

Last Answer : a) harvesting

The tillage that is done immediately after crop harvesting to remove the weeds and to restore soil structure is? A. strip B. sub-soil C. fallow D. stubble

Description : The tillage that is done immediately after crop harvesting to remove the weeds and to restore soil structure is? A. strip B. sub-soil C. fallow D. stubble

Last Answer : D. stubble

'Mixed Farming means – (1) Sowing of both cash and food crops (2) Sowing of two or more crops in the same field (3) Sowing of two or more plants in alternate years (4) Rearing of cattle and agriculture

Description : 'Mixed Farming means – (1) Sowing of both cash and food crops (2) Sowing of two or more crops in the same field (3) Sowing of two or more plants in alternate years (4) Rearing of cattle and agriculture

Last Answer : (4) Rearing of cattle and agriculture Explanation: Mixed farming is the combining of two independent agricultural enterprises on the same farm. A typical case of mixed farming is the combination ... with livestock farming. Mixed farming may be treated as a special case of diversified farming.

Main function of cutout relay in electrical circuit is A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces. B. To restrict the maximum output at high speed. C. To permit the generation to deliver current to the battery or to the lightening and ignition circuit. D. None of the above

Description : Main function of cutout relay in electrical circuit is A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces. B. To restrict the maximum output at ... deliver current to the battery or to the lightening and ignition circuit. D. None of the above

Last Answer : A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces.

Rated speed of an engine is the speed at which an engine devlopes (A) Maximum crankshaft torque (B) Maximum brake horse power output (C) Maximum thermal efficiency (D) Maximum drawback pull

Description : Rated speed of an engine is the speed at which an engine devlopes (A) Maximum crankshaft torque (B) Maximum brake horse power output (C) Maximum thermal efficiency (D) Maximum drawback pull

Last Answer : (B) Maximum brake horse power output

What is the value for centrifugal torque for maximum power transmission in belt drives a) ½ maximum torque b) 2/3 maximum torque c) ¾ maximum torque d) None of the above

Description : What is the value for centrifugal torque for maximum power transmission in belt drives a) ½ maximum torque b) 2/3 maximum torque c) ¾ maximum torque d) None of the above

Last Answer : d) None of the above

subsoilers are operated at maximum depth of: A.30-40cm B.45-75cm C.75-90cm D.10-20cm

Description : subsoilers are operated at maximum depth of: A.30-40cm B.45-75cm C.75-90cm D.10-20cm

Last Answer : B.45-75cm

In a horizontal plate type planter maximum obtainable value of cell fill is : A.Greater then 100% B.Less than 100% C.200% D.None of the above

Description : In a horizontal plate type planter maximum obtainable value of cell fill is : A.Greater then 100% B.Less than 100% C.200% D.None of the above

Last Answer : A.Greater then 100%

For maximum moisture conservation ploughing is done with A. mb plough b. cultivator c. chisel plough d. dice harrow

Description : For maximum moisture conservation ploughing is done with A. mb plough b. cultivator c. chisel plough d. dice harrow

Last Answer : c. chisel plough

pecific energy requirement of rotary tillers can be reduce by a) Increasing the bite length b) Decreasing depth to diameter ratio c) Both (a) and (b) d) Excessive reduction in total power requirement

Description : pecific energy requirement of rotary tillers can be reduce by a) Increasing the bite length b) Decreasing depth to diameter ratio c) Both (a) and (b) d) Excessive reduction in total power requirement

Last Answer : c) Both (a) and (b)

Soil acceleration increases draft because of a) Increased normal load on soil working surface b) Increased frictional resistance c) Kinetic energy imparted to the soil d) All of the above

Description : Soil acceleration increases draft because of a) Increased normal load on soil working surface b) Increased frictional resistance c) Kinetic energy imparted to the soil d) All of the above

Last Answer : d) All of the above

The amount of energy required to produce a given degree of pulverisation depends primarily on a) Soil strength b) Energy utilisation efficiency of tool c) Both (a) and (b) d) None of the above

Description : The amount of energy required to produce a given degree of pulverisation depends primarily on a) Soil strength b) Energy utilisation efficiency of tool c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Traditional farming has always been based on __________. a. Genetic engineering.b. Solar harvesting. c. Photosynthesis. d. All of the above.

Description : Traditional farming has always been based on __________. a. Genetic engineering.b. Solar harvesting. c. Photosynthesis. d. All of the above.

Last Answer : a. Genetic engineering.

Traditional farming has always been based on __________. a. Genetic engineering. b. Solar harvesting. c. Photosynthesis. d. All of the above.

Description : Traditional farming has always been based on __________. a. Genetic engineering. b. Solar harvesting. c. Photosynthesis. d. All of the above.

Last Answer : a. Genetic engineering.

The following operation is not carried out by an plough a) sowing seeds b) breaking the clods c) crushing the soil d) hammering the soil

Description : The following operation is not carried out by an plough a) sowing seeds b) breaking the clods c) crushing the soil d) hammering the soil

Last Answer : sowing seeds

The tillage operation, done to create a good seedbed for proper seeding/planting

Description : The tillage operation, done to create a good seedbed for proper seeding/planting

Last Answer : Ans.Secondary tillage