Center of gravity of a thin hollow cone lies on the axis at a height of (A) One-fourth of the total height above base (B) One-third of the total height above base (C) One-half of the total height above base (D) Three-eighth of the total height above the base

Center of gravity of a thin hollow cone lies on the axis at a height of
(A) One-fourth of the total height above base
(B) One-third of the total height above base
(C) One-half of the total height above base
(D) Three-eighth of the total height above the base
by

1 Answer

Answer :

(B) One-third of the total height above base
by

Related questions

Center of gravity of a solid cone lies on the axis at the height (A) One-fourth of the total height above base (B) One-third of the total height above base (C) One-half of the total height above base (D) Three-eighth of the total height above the base

Description : Center of gravity of a solid cone lies on the axis at the height (A) One-fourth of the total height above base (B) One-third of the total height above base (C) One-half of the total height above base (D) Three-eighth of the total height above the base

Last Answer : (A) One-fourth of the total height above base

Center of gravity of a thin hollow cone lies on the axis at a height of?

Description : Center of gravity of a thin hollow cone lies on the axis at a height of?

Last Answer : Center of gravity of a thin hollow cone lies on the axis at a height of one-third of the total height above base.

Center of gravity of a solid cone lies on the axis at the height?

Description : Center of gravity of a solid cone lies on the axis at the height?

Last Answer : Center of gravity of a solid cone lies on the axis at the height one-fourth of the total height above base.

The C.G. of a right circular solid cone of height h lies at the following distance from the base (A) h/2 (B) J/3 (C) h/6 (D) h/4

Description : The C.G. of a right circular solid cone of height h lies at the following distance from the base  (A) h/2  (B) J/3  (C) h/6  (D) h/4 

Last Answer : (D) h/4 

The Maximum diameter steel in slabs should not exceed --------- the total thickness of the slab [ A ] One-half [ B ] One-fourth [ C ] One-eighth [ D ] One-sixteenth

Description : The Maximum diameter steel in slabs should not exceed --------- the total thickness of the slab [ A ] One-half [ B ] One-fourth [ C ] One-eighth [ D ] One-sixteenth

Last Answer : [ C ] One-eighth

A bus stop is barricaded from the remaining part of the road, by using 50 hollow cones made of recycled cardboard. Each cone has a base diameter of 40 cm and height 1 m. -Maths 9th

Description : A bus stop is barricaded from the remaining part of the road, by using 50 hollow cones made of recycled cardboard. Each cone has a base diameter of 40 cm and height 1 m. -Maths 9th

Last Answer : Given: Radius of cone, r = diameter/2 = 40/2 cm = 20cm = 0.2 m Height of cone, h = 1m Slant height of cone is l, and l2 = (r2+h2) Using given values, l2 = (0.22+12) = (1.04) Or l ... (32.028 12) = Rs.384.336 = Rs.384.34 (approximately) Therefore, the cost of painting all these cones is Rs. 384.34.

Liquefied Petroleum Gas (LPG) in domestic use cylinders is in the liquid form. The density of LPG in liquid form is about __________ of that of water (i.e. 1 gm/c.c). (A) One fourth (B) One third (C) Half (D) One eighth

Description : Liquefied Petroleum Gas (LPG) in domestic use cylinders is in the liquid form. The density of LPG in liquid form is about __________ of that of water (i.e. 1 gm/c.c). (A) One fourth (B) One third (C) Half (D) One eighth

Last Answer : (C) Half

The center of gravity of a uniform lamina lies at (A) The center of heavy portion (B) The bottom surface (C) The midpoint of its axis (D) All of the above

Description : The center of gravity of a uniform lamina lies at (A) The center of heavy portion (B) The bottom surface (C) The midpoint of its axis (D) All of the above

Last Answer : (C) The midpoint of its axis

The diameter of the Links in column should be at least……….of the largest diameter of the longitudinal steel [ A ] One-half [ B ] Three-fourth [ C ] One eighth [ D ] One – fourth

Description : The diameter of the Links in column should be at least……….of the largest diameter of the longitudinal steel [ A ] One-half [ B ] Three-fourth [ C ] One eighth [ D ] One – fourth

Last Answer : [ D ] One – fourth

Center of gravity of an irregular body lies on the A. edgeB. center of body C. point of intersection of lines D. along the axis of rotation

Description : Center of gravity of an irregular body lies on the A. edge B. center of body C. point of intersection of lines D. along the axis of rotation

Last Answer : point of intersection of lines

The thickness of base slab of a retaining wall generally provided, is (A) One half of the width of the stem at the bottom (B) One-third of the width of the stem at the bottom (C) One fourth of the width of the steam at the bottom (D) Width of the stem at the bottom

Description : The thickness of base slab of a retaining wall generally provided, is (A) One half of the width of the stem at the bottom (B) One-third of the width of the stem at the bottom (C) One fourth of the width of the steam at the bottom (D) Width of the stem at the bottom

Last Answer : Answer: Option D

If you like pretty gems that sparkle and shine, I invite you to dig in my virtual mine. My first is purple, fit for a king, My second is green where Dorothy did her thing. My third is red, July's birthstone as well, My fourth is seen in strings and is found inside a shell. My fifth is hard, pure Carbon and expensive to buy, My sixth is Crocodolite, striped like the big cat's eye. Seventh is two words, a man-made fake of April's stone, Eighth is very dark and found at Lightning Ridge alone. Now take from each gem, one letter in its turn, And you will find the stuff for which even the god's yearn. -Riddles

Description : If you like pretty gems that sparkle and shine, I invite you to dig in my virtual mine. My first is purple, fit for a king, My second is green where Dorothy did her thing. My third is red, July's ... gem, one letter in its turn, And you will find the stuff for which even the god's yearn. -Riddles

Last Answer : Ambrosia The gems are: Amethyst Emerald ( Emerald City in the Wizard of Oz ) Ruby Pearl Diamond Tiger's eye Cubic Zirconium (Fake diamond) Black Opal Taking the first letter of Amethyst, second of Emerald, etc.. gives Ambrosia - The food of the gods.

The M.I. of hollow circular section about a central axis perpendicular to section as compared to its M.I. about horizontal axis is (A) Same (B) Double (C) Half (D) Four times

Description : The M.I. of hollow circular section about a central axis perpendicular to section as compared to its M.I. about horizontal axis is (A) Same (B) Double (C) Half (D) Four times

Last Answer : (B) Double

The power transmitted through the pipe is maximum when the head lost due to friction is equal to (A) One-fourth of the total supply head (B) One-third of the total supply head (C) One-half of the total supply head (D) Two-third of the total supply head

Description : The power transmitted through the pipe is maximum when the head lost due to friction is equal to (A) One-fourth of the total supply head (B) One-third of the total supply head (C) One-half of the total supply head (D) Two-third of the total supply head

Last Answer : Answer: Option B

Find the total surface area of a cone, if its slant height is 21 m and diameter of its base is 24 m -Maths 9th

Description : Find the total surface area of a cone, if its slant height is 21 m and diameter of its base is 24 m -Maths 9th

Last Answer : Radius of cone, r = 24/2 m = 12m Slant height, l = 21 m Formula: Total Surface area of the cone = πr(l+r) Total Surface area of the cone = (22/7)×12×(21+12) m2 = 1244.57m2

The center of gravity of a triangle lies at the point of (A) Concurrence of the medians (B) Intersection of its altitudes (C) Intersection of bisector of angles (D) Intersection of diagonals

Description : The center of gravity of a triangle lies at the point of (A) Concurrence of the medians (B) Intersection of its altitudes (C) Intersection of bisector of angles (D) Intersection of diagonals

Last Answer : (A) Concurrence of the medians

According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is (A) Half of the width of the slab (B) Two-third of the width of the slab (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Description : According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is ... (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Last Answer : Answer: Option C

The loose pockets in soil mass can be bridged safely by providing a raft foundation provided the soft area is smaller than (A) The column spacing (B) One-third the column spacing (C) Half the column spacing (D) Three-fourth the column spacing

Description : The loose pockets in soil mass can be bridged safely by providing a raft foundation provided the soft area is smaller than (A) The column spacing (B) One-third the column spacing (C) Half the column spacing (D) Three-fourth the column spacing

Last Answer : Answer: Option B

The significant wave height is defined is the average height of the (A) One-third highest waves (B) One-fourth highest waves (C) One-fifth highest waves (D) One-tenth highest waves

Description : The significant wave height is defined is the average height of the (A) One-third highest waves (B) One-fourth highest waves (C) One-fifth highest waves (D) One-tenth highest waves

Last Answer : (A) One-third highest waves

Metacentric height is the distance between the metacentre and (A) Water surface(B) Center of pressure (C) Center of gravity (D) Center of buoyancy

Description : Metacentric height is the distance between the metacentre and (A) Water surface (B) Center of pressure (C) Center of gravity (D) Center of buoyancy

Last Answer : Answer: Option C

Metacentric height is given as the distance between (A) The center of gravity of the body and the metacentre (B) The center of gravity of the body and the center of buoyancy (C) The center of gravity of the body and the center of pressure (D) Center of buoyancy and metacentre

Description : Metacentric height is given as the distance between (A) The center of gravity of the body and the metacentre (B) The center of gravity of the body and the center of buoyancy (C) The center of gravity of the body and the center of pressure (D) Center of buoyancy and metacentre

Last Answer : Answer: Option A

To ascertain the maximum permissible eccentricity of loads on circular columns, the rule generally followed, is (A) Middle half rule of columns (B) Middle third rule of columns (C) Middle fourth rule of columns (D) None of these

Description : To ascertain the maximum permissible eccentricity of loads on circular columns, the rule generally followed, is (A) Middle half rule of columns (B) Middle third rule of columns (C) Middle fourth rule of columns (D) None of these

Last Answer : (C) Middle fourth rule of columns

In a short cylindrical external mouthpiece, the vena contracta occurs at a distance __________ the diameter of the orifice from the outlet of orifice. (A) Equal to (B) One-fourth (C) One-third (D) One-half

Description : In a short cylindrical external mouthpiece, the vena contracta occurs at a distance __________ the diameter of the orifice from the outlet of orifice. (A) Equal to (B) One-fourth (C) One-third (D) One-half

Last Answer : Answer: Option B

The breadth of rib in a T-beam should at least be equal to __________the depth of rib (a) One –half (b) One –third (c) One-fourth (d) One –sixth

Description : The breadth of rib in a T-beam should at least be equal to __________the depth of rib (a) One –half (b) One –third (c) One-fourth (d) One –sixth

Last Answer : (b) One –third

In a Young's double-slit experiment the center of a bright fringe occurs wherever waves from the slits differ in the distance they travel by a multiple of: A. a fourth of a wavelength B. a half a wavelength C. a wavelength D. three-fourths of a wavelength

Description : In a Young's double-slit experiment the center of a bright fringe occurs wherever waves from the slits differ in the distance they travel by a multiple of: A. a fourth of a wavelength B. a half a wavelength C. a wavelength D. three-fourths of a wavelength

Last Answer : C. a wavelength

The range within which a load can be applied on a rectangular column, to avoid any tensile stress, is (A) One-half of the base (B) One-fifth of the base (C) One-fourth of the base (D) One-fifth of the base

Description : The range within which a load can be applied on a rectangular column, to avoid any tensile stress,  is  (A) One-half of the base  (B) One-fifth of the base  (C) One-fourth of the base  (D) One-fifth of the base 

Last Answer : (B) One-fifth of the base 

The center of gravity of a triangle lies at the point of?

Description : The center of gravity of a triangle lies at the point of?

Last Answer : The center of gravity of a triangle lies at the point of concurrence of the medians.

The center of gravity of a uniform lamina lies at?

Description : The center of gravity of a uniform lamina lies at?

Last Answer : The center of gravity of a uniform lamina lies at the mid point of its axis.

When the reservoir is full, the maximum compressive force in a gravity dam is produced (A) At the toe (B) At the heel (C) Within the middle third of base (D) At centre of base

Description : When the reservoir is full, the maximum compressive force in a gravity dam is produced (A) At the toe (B) At the heel (C) Within the middle third of base (D) At centre of base

Last Answer : Answer: Option A

A joker’s cap is in the form of right circular cone of base radius 7 cm and height 24cm. Find the area of the sheet required to make 10 such caps. -Maths 9th

Description : A joker’s cap is in the form of right circular cone of base radius 7 cm and height 24cm. Find the area of the sheet required to make 10 such caps. -Maths 9th

Last Answer : Radius of conical cap, r = 7 cm Height of conical cap, h = 24cm Slant height, l2 = (r2+h2) = (72+242) = (49+576) = (625) Or l = 25 cm CSA of 1 conical cap = πrl = (22/7)×7×24 = 550 CSA of 10 caps = (10×550) cm2 = 5500 cm2 Therefore, the area of the sheet required to make 10 such caps is 5500 cm2.

Curved surface area of a cone is 308 cm2 and its slant height is 14 cm. Find (i) radius of the base -Maths 9th

Description : Curved surface area of a cone is 308 cm2 and its slant height is 14 cm. Find (i) radius of the base -Maths 9th

Last Answer : Slant height of cone, l = 14 cm Let the radius of the cone be r. (i) We know, CSA of cone = πrl Given: Curved surface area of a cone is 308 cm2 (308 ) = (22/7) r 14 308 = 44 r r = 308 ... Total surface area of cone = 308+(22/7) 72 = 308+154 Therefore, the total surface area of the cone is 462 cm2.

Diameter of the base of a cone is 10.5 cm and its slant height is 10 cm. Find its curved surface area -Maths 9th

Description : Diameter of the base of a cone is 10.5 cm and its slant height is 10 cm. Find its curved surface area -Maths 9th

Last Answer : Radius of the base of cone = diameter/ 2 = (10.5/2)cm = 5.25cm Slant height of cone, say l = 10 cm CSA of cone is = πrl = (22/7)×5.25×10 = 165

The circumference of the base of 9 m high wooden solid cone is 44 m. Find the slant height of the cone. -Maths 9th

Description : The circumference of the base of 9 m high wooden solid cone is 44 m. Find the slant height of the cone. -Maths 9th

Last Answer : Circumference of the base of a cone = 2πr

How much ice-cream can be put into a cone with base radius 3.5 cm and height 12 cm ? -Maths 9th

Description : How much ice-cream can be put into a cone with base radius 3.5 cm and height 12 cm ? -Maths 9th

Last Answer : Here, radius (r) = 3.5 cm and height (h) = 12 cm ∴ Amount of ice cream = 1 / 3 πr2h = 1 / 3 × 22 / 7 × 3.5 × 3.5 × 12 = 154 cm3

The circumference of the base of 9 m high wooden solid cone is 44 m. Find the slant height of the cone. -Maths 9th

Description : The circumference of the base of 9 m high wooden solid cone is 44 m. Find the slant height of the cone. -Maths 9th

Last Answer : Circumference of the base of a cone = 2πr

How much ice-cream can be put into a cone with base radius 3.5 cm and height 12 cm ? -Maths 9th

Description : How much ice-cream can be put into a cone with base radius 3.5 cm and height 12 cm ? -Maths 9th

Last Answer : Here, radius (r) = 3.5 cm and height (h) = 12 cm ∴ Amount of ice cream = 1 / 3 πr2h = 1 / 3 × 22 / 7 × 3.5 × 3.5 × 12 = 154 cm3

A cone of height 7 cm and base radius 1 cm is carved from a cuboidal block of wood 10 cm × 5 cm × 2 cm -Maths 9th

Description : A cone of height 7 cm and base radius 1 cm is carved from a cuboidal block of wood 10 cm × 5 cm × 2 cm -Maths 9th

Last Answer : 92239223% Volume of cone = 1313πr2h = 13×227×1×7=22313×227×1×7=223 cu. cm Volume of cubical block = (10 × 5 × 2) cm3 = 100 cm3 ∴ Wastage of wood = (100−227)100×100(100−227)100×100 = 27832783% = 92239223%

For minimum curved surface area and given volume, the ration of the height and radius of base of a cone is :

Description : For minimum curved surface area and given volume, the ration of the height and radius of base of a cone is :

Last Answer : For minimum curved surface area and given volume, the ration of the height and radius of base of a cone is : A. ` ... : 1` C. `1 : 2` D. None of these

How can you find the volume of a cone with the same base and height?

Description : How can you find the volume of a cone with the same base and height?

Last Answer : Volume formula for a cone: 1/3*pi*radius squared*height

What is one- eighth minus one- fourth?

Description : What is one- eighth minus one- fourth?

Last Answer : It is: 1/8 minus 1/4 = -1/8

Which one of the following pairs is not correctly matched? (1) Languages : Eighth Schedule (2) The forms of oaths or affirmations: Second Schedule (3) Allocation of seats in the Council of States - Fourth Schedule (4) Provisions as to disqualification on the ground of defection - Tenth Schedule

Description : Which one of the following pairs is not correctly matched? (1) Languages : Eighth Schedule (2) The forms of oaths or affirmations: Second Schedule (3) Allocation of seats in the Council of States - Fourth Schedule (4) Provisions as to disqualification on the ground of defection - Tenth Schedule

Last Answer : (2) The forms of oaths or affirmations: Second Schedule Explanation: Forms of Oaths and Affirmations are the subject of Third Schedule. Salary of President, Governors, Chief Judges, Judges of High Court and Supreme Court, Comptroller and Auditor General are the subject of Second Schedule.

During which plan was the Project Tiger scheme started? a. Fifth five year plan b. Eighth five year plan c. Fourth five year plan d. Tenth five year plan

Description : During which plan was the Project Tiger scheme started? a. Fifth five year plan b. Eighth five year plan c. Fourth five year plan d. Tenth five year plan

Last Answer : c. Fourth five year plan

Which plan introduced the time and target approach to family planning? A. Fourth Plan B. Sixth Plan C. Eighth plan D. None of these

Description : Which plan introduced the time and target approach to family planning? A. Fourth Plan B. Sixth Plan C. Eighth plan D. None of these

Last Answer : B. Sixth Plan

nozzle which forms narrow elliptical spray pattern. a) Hollow cone nozzle b) Hard cone nozzle c) Solid cone nozzle d) Fan nozzle

Description : nozzle which forms narrow elliptical spray pattern. a) Hollow cone nozzle b) Hard cone nozzle c) Solid cone nozzle d) Fan nozzle

Last Answer : Fan nozzle

is the types of nozzle used in sprayers a) Hollow cone type of nozzle b) Solid cone type nozzle c) Fan type nozzle d) All of the above

Description : is the types of nozzle used in sprayers a) Hollow cone type of nozzle b) Solid cone type nozzle c) Fan type nozzle d) All of the above

Last Answer : All of the above

Spary angle for fan nozzle and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Description : Spary angle for fan nozzle and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Last Answer : c) 60-95

The nozzle used for chemical spraying of weedicides (a) hollow cone nozzle (b) solid cone nozzle (c) flat fan nozzle (d) flooding nozzle

Description : The nozzle used for chemical spraying of weedicides (a) hollow cone nozzle (b) solid cone nozzle (c) flat fan nozzle (d) flooding nozzle

Last Answer : (c) flat fan nozzle

Hollow cone nozzles employed on boom type of sprayers have spray angle between : A .30-60° B.40-60° C.60-95° D.100-150°

Description : Hollow cone nozzles employed on boom type of sprayers have spray angle between : A .30-60° B.40-60° C.60-95° D.100-150°

Last Answer : C.60-95°

Spray Angle for fan nozzles and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Description : Spray Angle for fan nozzles and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Last Answer : c) 60-95

Foam spraying requires special type of nozzle A. Flat fan nozzle B. Flooding nozzle C. Hollow cone nozzle D. Air aspiring nozzle

Description : Foam spraying requires special type of nozzle A. Flat fan nozzle B. Flooding nozzle C. Hollow cone nozzle D. Air aspiring nozzle

Last Answer : D. Air aspiring nozzle