Any woodworkers (or others) how to cut this groove?

Any woodworkers (or others) how to cut this groove?
by

1 Answer

Answer :

Use a drill to cut a hole at each end of the slot, then chisel it out.
by

Related questions

What is best to be used to repair or rub out scratches in the finish of a nice, solid-oak coffee table ?

Description : What is best to be used to repair or rub out scratches in the finish of a nice, solid-oak coffee table ?

Last Answer : answer:Is it stained oak or natural color? There are magic markers you can buy that are wood colored. They might be in a store like Walmart in the hardware section or in Home Depot. You can buy one similar ... up techniques. However, if there are carvings in it, it's best to get it done by a pro.

Math question (woodworking, not homework)

Description : Math question (woodworking, not homework)

Last Answer : Maybe I don’t know enough about architecture, but I’m not so clear what you mean to ask? When you say, “at the gable,” do you mean pinnacle of the gable or where the gable meats the base structure house? If you look at this picture, do you mean the width of the base of the yellow area?

How should I go about restoring bocce balls?

Description : How should I go about restoring bocce balls?

Last Answer : My Nonno used to restore his when I was a kid…I think that he just used ordinary paint (probably lead based) that can be bought at any hardware store.

What hardware do I need to fix this toy chest?

Description : What hardware do I need to fix this toy chest?

Last Answer : What you purchased might still work but you would have to drill new holes under the lid (about two inches closer to the back edge from where the current holes are) to make up the 2 inch gap. ... open lid and support a person sitting on it, you may want to find something designed for that purpose.

From idea to production?

Description : From idea to production?

Last Answer : answer:It probably depends on the product. I once met an inventor whose business consisted of coming up with ideas for inexpensive products - primarily homewares and kitchen utensils made of plastic, for ... Brooklyn Bridge, though, you'd have to come up with a different idea to develop that.

How should I fix this broken carving?

Description : How should I fix this broken carving?

Last Answer : I would use super glue, small drops hold stuff together really well. If it is really valuable have it professionally restored.

Woodworking question with diagram: Which tool does the job?

Description : Woodworking question with diagram: Which tool does the job?

Last Answer : You can try a plunge router or a table saw with a dado blade.

What is a good random orbital sander for a advanced hobbiest woodworker?

Description : What is a good random orbital sander for a advanced hobbiest woodworker?

Last Answer : answer:@heydrew Fien MultiMaster with turbo-vac.

What do I need to do to protect the wood of my doghouse before painting it?

Description : What do I need to do to protect the wood of my doghouse before painting it?

Last Answer : I would use an oil based primer and paint :)

what do I need to use to get a satin fiinish on a chair I recently refinished?

Description : what do I need to use to get a satin fiinish on a chair I recently refinished?

Last Answer : I am a decorative painter & have finished many pieces of furniture. Diamond Varathane, Satin , water-based is what I usually use. To make it very rich looking, put on 2 coats (dry compltely btwn coats), sanding lightly between coats, then a final coat. Muralsplus.com has a wealth of info on this

What kind of lacquer or stain should I use on a mahogany dresser?

Description : What kind of lacquer or stain should I use on a mahogany dresser?

Last Answer : answer:I'm a big fan of shellac, which I use to finish my harps. It dries extremely fast, produces a gleaming surface that's very flattering to nice hardwoods, and uses alcohol as a solvent. Don't use the ... t spill booze on it. Here's a good shellac source, and here's a nice FAQ. Good Luck! .

Woodworkers: can you help me figure out how this pergola gate was constructed?

Description : Woodworkers: can you help me figure out how this pergola gate was constructed?

Last Answer : I’m not a woodworker, but I’ve read a fair amount of it as it applies to wooden boat building and some other techniques. I suspect that something like this would answer your question. (Note that the link has a cockpit rail that looks very similar to your gate.)

Woodworkers: What tool is the most appropriate and affordable for making many large dado cuts?

Description : Woodworkers: What tool is the most appropriate and affordable for making many large dado cuts?

Last Answer : I can’t think of any other tool but a router to do something similar. You might want to check Amazon.com. I just bought my husband this awesome 3¼ HP router that was not much more money but way better than any of the routers we found at Lowes or Home Depot. (It was only $299 last week.)

What would you do if you were remodeling and at one point uncovered the original floor and discovered it's tongue and groove oak?

Description : What would you do if you were remodeling and at one point uncovered the original floor and discovered it's tongue and groove oak?

Last Answer : I would laminate over it.

How does the app "Groove Music" work?

Description : How does the app "Groove Music" work?

Last Answer : Prime example just came on. Where in the Hell did This come from? Damned sure I didn’t load it onto my computer at any point and I know I did not purchase a copy.

What is another way of saying "getting your groove back"?

Description : What is another way of saying "getting your groove back"?

Last Answer : back in the saddle again

Is there an open source application that is similar to Microsoft Office Groove?

Description : Is there an open source application that is similar to Microsoft Office Groove?

Last Answer : That’s a tough one. The only thing that comes to mind is using Google Docs or a similar online office suite that offers sharing of documents. Depending on what you want to use Groove for that may work.

Why do some fruits have a groove on the side them?

Description : Why do some fruits have a groove on the side them?

Last Answer : Hmm. Probably because the fruit meat grows around a large, central seed (the pit found in peaches and plums).

Why is there a groove on the tire surface of the car ?

Description : Why is there a groove on the tire surface of the car ?

Last Answer : The surface of the car tire is grooved to maximize the frictional force between the road and the tire. The tire surface is grooved to reduce the rotation of the wheel by increasing the frictional force ... the friction force due to this groove, the better the speed of the vehicle can be controlled.

Patellar groove is found on which bone `:-`

Description : Patellar groove is found on which bone `:-`

Last Answer : Patellar groove is found on which bone `:-` A. Femur B. Tibio-fibula C. Depression between femur and tibio-fibula D. Tarsus

$ Dinoflagellates have two grooves in the cell wall. ! There are many flagella in each groove.

Description : $ Dinoflagellates have two grooves in the cell wall. ! There are many flagella in each groove.

Last Answer : $ Dinoflagellates have two grooves in the cell wall. ! There are many flagella in each groove. A. If both ... is wrong D. If both As and R are wrong.

$ In the cell wall of Dinoflagellates, there is present only one groove. ! Diatoms have two flagella.

Description : $ In the cell wall of Dinoflagellates, there is present only one groove. ! Diatoms have two flagella.

Last Answer : $ In the cell wall of Dinoflagellates, there is present only one groove. ! Diatoms have two flagella. A. ... is wrong D. If both As and R are wrong.

Deltoid groove is present in

Description : Deltoid groove is present in

Last Answer : Deltoid groove is present in A. Radio-ulna B. Femur C. Tibio-fibula D. Humerus

What is a deep groove down in the ground?

Description : What is a deep groove down in the ground?

Last Answer : Need answer

A groove or a crack-like sore is called a (an. A. fissure B. nodule C. polyp D. ulcer

Description : A groove or a crack-like sore is called a (an. A. fissure B. nodule C. polyp D. ulcer

Last Answer : Ans: A

The deepest place on earth is ------? A. Trench B. Mariana Trench (Answer) C. Mangrove D. Groove E. None of these

Description : The deepest place on earth is ------? A. Trench B. Mariana Trench (Answer) C. Mangrove D. Groove E. None of these

Last Answer : B. Mariana Trench (Answer)

A cylinder roller creates lesser noise than a deep groove ball bearing. (a) True (b) False

Description : A cylinder roller creates lesser noise than a deep groove ball bearing. (a) True (b) False

Last Answer : (b) False

Which of the bearings given below SHOULD NOT be subjected to a thrust load? (a) Deep groove ball bearing (b) Angular contact ball bearing (c) Cylindrical (straight) roller bearing (d) Single row tapered roller bearing

Description : Which of the bearings given below SHOULD NOT be subjected to a thrust load? (a) Deep groove ball bearing (b) Angular contact ball bearing (c) Cylindrical (straight) roller bearing (d) Single row tapered roller bearing

Last Answer : (c) Cylindrical (straight) roller bearing

Cylindrical roller bearing has a lower load capacity as compared to deep groove ball bearing. (a) True (b) False

Description : Cylindrical roller bearing has a lower load capacity as compared to deep groove ball bearing. (a) True (b) False

Last Answer : (b) False

Deep groove ball bearings are used for (a) heavy thrust load only (b) the small angular displacement of shafts (c) radial load at high speed (d) combined thrust and radial loads at high speed

Description : Deep groove ball bearings are used for (a) heavy thrust load only (b) the small angular displacement of shafts (c) radial load at high speed (d) combined thrust and radial loads at high speed

Last Answer : (d) combined thrust and radial loads at high speed

The deep groove ball bearing has immense rigidity. (a) True (b) No, it has point contact and hence low rigidity (c) It has surface contact (d) It has line contact

Description : The deep groove ball bearing has immense rigidity. (a) True (b) No, it has point contact and hence low rigidity (c) It has surface contact (d) It has line contact

Last Answer : (b) No, it has point contact and hence low rigidity

There is a problem of alignment in deep groove ball bearings. (a) Yes (b) No, it is self-aligning (c) It aligns itself only in some particular cases (d) Can’t be determined

Description : There is a problem of alignment in deep groove ball bearings. (a) Yes (b) No, it is self-aligning (c) It aligns itself only in some particular cases (d) Can’t be determined

Last Answer : (a) Yes

Deep groove ball bearings create a lot of noise. (a) Yes (b) Depends on the application (c) They create very less noise (d) No reference frame for comparison is mentioned

Description : Deep groove ball bearings create a lot of noise. (a) Yes (b) Depends on the application (c) They create very less noise (d) No reference frame for comparison is mentioned

Last Answer : (c) They create very less noise

Match List-I (Type of Anti-friction bearing) with List-II (Specific Use) and select the using the code given below the Lists: [IES-2006] List-I List -II A. Self-aligning ball bearing 1. For pure axial load B. Taper roller bearing 2. For hinged condition C. Deep groove ball bearing 3. For pure radial load D. Thrust ball bearing 4. For axial and radial load A B C D A B C D (a) 2 1 3 4 (b) 3 4 2 1 (c) 2 4 3 1 (d) 3 1 2 4

Description : Match List-I (Type of Anti-friction bearing) with List-II (Specific Use) and select the using the code given below the Lists: [IES-2006] List-I List -II A. Self-aligning ball bearing 1. For pure axial load B. Taper roller bearing 2. For ... C D (a) 2 1 3 4 (b) 3 4 2 1 (c) 2 4 3 1 (d) 3 1 2 4

Last Answer : (c) 2 4 3 1

Cylinder roller creates lesser noise than deep groove ball bearing. a) True b) False

Description : Cylinder roller creates lesser noise than deep groove ball bearing. a) True b) False

Last Answer : b) False

Cylindrical load bearing has lower load capacity as compared to deep groove ball bearing. a) True b) False

Description : Cylindrical load bearing has lower load capacity as compared to deep groove ball bearing. a) True b) False

Last Answer : b) False

Deep groove ball bearing has immense rigidity. a) True b) No it has point contact and hence low rigidity c) It has surface contact d) It has line contact

Description : Deep groove ball bearing has immense rigidity. a) True b) No it has point contact and hence low rigidity c) It has surface contact d) It has line contact

Last Answer : b) No it has point contact and hence low rigidity

There is problem of alignment in deep groove ball bearings. a) Yes b) No, it is self-aligning c) It aligns itself only in some particular cases d) Can’t be determined

Description : There is problem of alignment in deep groove ball bearings. a) Yes b) No, it is self-aligning c) It aligns itself only in some particular cases d) Can’t be determined

Last Answer : a) Yes

Deep groove ball bearings creates a lot of noise. a) Yes b) They create very less noise c) Depends on the application d) No reference frame for comparison is mentioned

Description : Deep groove ball bearings creates a lot of noise. a) Yes b) They create very less noise c) Depends on the application d) No reference frame for comparison is mentioned

Last Answer : b) They create very less noise

Type of welded joint which do not exit (i) Groove type (ii) Spot type (iii)Plug type (iv) Surface type

Description : Type of welded joint which do not exit (i) Groove type (ii) Spot type (iii)Plug type (iv) Surface type

Last Answer : (iv) Surface type

In which case, molten metal is used to do welding? (i) Groove type (ii) spot type (iii) Plug type (iv) None

Description : In which case, molten metal is used to do welding? (i) Groove type (ii) spot type (iii) Plug type (iv) None

Last Answer : (iii) Plug type

Balls and the races of the deep groove ball may roll freely without any sliding. a) True b) False

Description : Balls and the races of the deep groove ball may roll freely without any sliding. a) True b) False

Last Answer : a) True

What is the maximum surface roughness for tongue and groove and small male and female gasket surfaces? a) 63 µ in b) 125 µ in c) 250 µ in d) 400 µ in

Description : What is the maximum surface roughness for tongue and groove and small male and female gasket surfaces? a) 63 µ in b) 125 µ in c) 250 µ in d) 400 µ in

Last Answer : b) 125 µ in

How shall the ring groove number be indicated on the edge of the ring groove flange? a) Just the ring groove number. b) The ring groove number is preceded by"R". c) The ring groove number is marked on the face. d) The ring groove number is marked at the bottom of the ring groove.

Description : How shall the ring groove number be indicated on the edge of the ring groove flange? a) Just the ring groove number. b) The ring groove number is preceded by"R". c) The ring groove number is marked on the face. d) The ring groove number is marked at the bottom of the ring groove.

Last Answer : b) The ring groove number is preceded by"R".

In respect to Class V A. it occurs on the buccal groove (fissure) B. it occurs on the lingual groove (fissure) C. it is a result of bad oral hygiene

Description : In respect to Class V A. it occurs on the buccal groove (fissure) B. it occurs on the lingual groove (fissure) C. it is a result of bad oral hygiene

Last Answer : C. it is a result of bad oral hygiene

When is a gingival groove LEAST required: A. When restoring with GIC for abrasion B. When restoring with GIC for root caries C. When restoring with GIC base and composite lamination D. When restoring with amalgam

Description : When is a gingival groove LEAST required: A. When restoring with GIC for abrasion B. When restoring with GIC for root caries C. When restoring with GIC base and composite lamination D. When restoring with amalgam

Last Answer : C. When restoring with GIC base and composite lamination

Benign migratory glossitis or Geographic Tongue, manifests itself in the oral cavity as, A. Irregularly outlined areas of hyperkeratosis of the dorsal surface of the tongue B. Furrows outlined the dorsal surface radiating out from a central groove in the centre of the tongue C. Loss (atrophy) of filiform papillae in multiple irregularly outlined areas D. Irregularly outlined erythematous area of hyper trophic fungiform E. A fibrinous exudate on the dorsal surface F. Grooves (fissures) radiating from a central fissure G. Irregular area in the midline of the tongue

Description : Benign migratory glossitis or Geographic Tongue, manifests itself in the oral cavity as, A. Irregularly outlined areas of hyperkeratosis of the dorsal surface of the tongue B. Furrows outlined the ... (fissures) radiating from a central fissure G. Irregular area in the midline of the tongue

Last Answer : C. Loss (atrophy) of filiform papillae in multiple irregularly outlined areas

Respiratory tree of sea cucumber is located at a) Mouth b) Cloaca c) Stomach d) Ambulacral groove

Description : Respiratory tree of sea cucumber is located at a) Mouth b) Cloaca c) Stomach d) Ambulacral groove

Last Answer : d) Ambulacral groove

Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Description : Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Last Answer : (i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter. (ii) Parting off: Slitting Cutter (iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key ... milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 

Would you take a pay cut to save the jobs of others?

Description : Would you take a pay cut to save the jobs of others?

Last Answer : No. I’m not responsible for other people’s fate.