What would you do if you were remodeling and at one point uncovered the original floor and discovered it's tongue and groove oak?

What would you do if you were remodeling and at one point uncovered the original floor and discovered it's tongue and groove oak?
by

1 Answer

Answer :

I would laminate over it.
by

Related questions

How to Install a Laminate Floor ?

Description : How to Install a Laminate Floor ?

Last Answer : How to Install a Laminate Floor Installing the flooring of your house is very easy. There are different types of flooring you can use. Laminated flooring is the type of flooring that ... You can then install your floorboard. The transitioning of the strips will finish the installation process.

How to Laminate a Countertop

Description : How to Laminate a Countertop

Last Answer : How to Laminate a Countertop Spills happen around the house, especially in the kitchen, making your countertops look unpleasant over time. If you want your kitchen counter to be protected, the best way is ... overall look by laminating it. Just follow these tips and you're sure to get great results.

DIY laminate flooring

Description : DIY laminate flooring

Last Answer : DIY laminate flooring If you decide to lay a laminate in your apartment (or room) without the involvement of professionals, you need to properly study all the subtleties of this procedure. In fact, ... boards must be laid vertically from doors to windows, otherwise the joints will shine in the sun.

What to look for when choosing a laminate?

Description : What to look for when choosing a laminate?

Last Answer : What to look for when choosing a laminate? The choice of laminate is an extremely relevant issue, since it is one of the most common modern floor coverings. Laminate is available ... allows the substrate, which is made from foamed polyethylene, synthetic winterizer, cardboard and cork.

What is the maximum surface roughness for tongue and groove and small male and female gasket surfaces? a) 63 µ in b) 125 µ in c) 250 µ in d) 400 µ in

Description : What is the maximum surface roughness for tongue and groove and small male and female gasket surfaces? a) 63 µ in b) 125 µ in c) 250 µ in d) 400 µ in

Last Answer : b) 125 µ in

Benign migratory glossitis or Geographic Tongue, manifests itself in the oral cavity as, A. Irregularly outlined areas of hyperkeratosis of the dorsal surface of the tongue B. Furrows outlined the dorsal surface radiating out from a central groove in the centre of the tongue C. Loss (atrophy) of filiform papillae in multiple irregularly outlined areas D. Irregularly outlined erythematous area of hyper trophic fungiform E. A fibrinous exudate on the dorsal surface F. Grooves (fissures) radiating from a central fissure G. Irregular area in the midline of the tongue

Description : Benign migratory glossitis or Geographic Tongue, manifests itself in the oral cavity as, A. Irregularly outlined areas of hyperkeratosis of the dorsal surface of the tongue B. Furrows outlined the ... (fissures) radiating from a central fissure G. Irregular area in the midline of the tongue

Last Answer : C. Loss (atrophy) of filiform papillae in multiple irregularly outlined areas

What is the biggest secret you ever uncovered? What secret of yours has been discovered?

Description : What is the biggest secret you ever uncovered? What secret of yours has been discovered?

Last Answer : When I was about 11 years old I discovered that my mum was cheating on my dad. Years later a someone discovered a similar thing about me (I was cheating on someone). Bad times.

Oak vs. Maple Floor?

Description : Oak vs. Maple Floor?

Last Answer : Oak flooring is definitely more durable than maple. It is a very hard wood and will stand up to foot traffic and families. Both floors are very easy to care for and require refinishing every few years.

True statement about the facial nerve include: a its nucleus is in the floor of the fourth ventricle b. its fibres reach the surface of the brain in the cerebellopontine angle c. transmits taste fibres for the anterior half of the tongue d. all above

Description : True statement about the facial nerve include: a its nucleus is in the floor of the fourth ventricle b. its fibres reach the surface of the brain in the cerebellopontine angle c. transmits taste fibres for the anterior half of the tongue d. all above

Last Answer : all above

Do you think Jim Cramer was uncovered by Jon Stewart badly enough that not only will Cramer's career be finished, but he might land in jail?

Description : Do you think Jim Cramer was uncovered by Jon Stewart badly enough that not only will Cramer's career be finished, but he might land in jail?

Last Answer : Would that it were so. Why is the only serious reporting about the lousy media coverage and the lousy track record of pundits on a comedy network? Why do we listen to pundits? Football, politics, ... to us to give CNBC the brushoff. They were in bed with the guys they covered absolutely sycophantic.

Uncovered windows- the neighbor's problem or the resident's?

Description : Uncovered windows- the neighbor's problem or the resident's?

Last Answer : Just like other silly things that people find offensive. If you don’t like what you see…don’t look. No one is forcing them to peer through the hypothetical woman’s windows. For that matter, I find that far creepier

what- The eye witness gave credence to the information the police had uncovered?

Description : what- The eye witness gave credence to the information the police had uncovered?

Last Answer : belief

What is something archaeologists have uncovered in trash heaps in Harappa?

Description : What is something archaeologists have uncovered in trash heaps in Harappa?

Last Answer : Feel Free to Answer

Receptacle outlets aboard ship should be designed so those mounted according to 46 CFR 111 have _____________. A. there must be a sufficient number of receptacle outlets in the crew accommodations for an adequate level of habitability B. each receptacle outelt must be compatible with the voltage and current of the circuit in which it is installed C. a receptacle outlet must not have any exposed parts with the plug opening uncovered D. all of the above

Description : Receptacle outlets aboard ship should be designed so those mounted according to 46 CFR 111 have _____________. A. there must be a sufficient number of receptacle outlets in the crew accommodations for an ... outlet must not have any exposed parts with the plug opening uncovered D. all of the above

Last Answer : Answer: D

The auditor's best defense when material misstatements in the financial statements are not uncovered in the audit is that a. The financial statements are client's responsibility. b. The audit was conducted in accordance with PSAs c. Client is guilty of contributory negligence. d. The audit was conducted in accordance with generally accepted accounting principles.

Description : The auditor's best defense when material misstatements in the financial statements are not uncovered in the audit is that a. The financial statements are client's responsibility. b. ... contributory negligence. d. The audit was conducted in accordance with generally accepted accounting principles.

Last Answer : The audit was conducted in accordance with PSAs

Repeated Testing of an already tested program, after modification, to discover any defects introduced or uncovered as a result of the changes in the software being tested or in another related or unrelated software component: a) Re Testing b) Confirmation Testing c) Regression Testing d) Negative Testing

Description : Repeated Testing of an already tested program, after modification, to discover any defects introduced or uncovered as a result of the changes in the software being tested or in another related or ... software component: a) Re Testing b) Confirmation Testing c) Regression Testing d) Negative Testing

Last Answer : c) Regression Testing

Swinging drawbar is advantageous because it help A. Taking short turn with machine wider than the tractor B. Reduces side draft C. Leaves only small area uncovered at corner of the fied D. All the above

Description : Swinging drawbar is advantageous because it help A. Taking short turn with machine wider than the tractor B. Reduces side draft C. Leaves only small area uncovered at corner of the fied D. All the above

Last Answer : A. Taking short turn with machine wider than the tractor

What is the original proverb about the mighty oak tree?

Description : What is the original proverb about the mighty oak tree?

Last Answer : Need answer

The MOST common sites for squamous carcinoma in the oral cavity are:** A. Palate and gingivae B. Tongue and floor of the mouth C. Tongue and palate

Description : The MOST common sites for squamous carcinoma in the oral cavity are:** A. Palate and gingivae B. Tongue and floor of the mouth C. Tongue and palate

Last Answer : B. Tongue and floor of the mouth

Taste buds in frog are restricted to (a) Tongue (b) Buccal cavity (c) Tongue & roof of buccal cavity (d) Tongue & floor of buccal cavity

Description : Taste buds in frog are restricted to (a) Tongue (b) Buccal cavity (c) Tongue & roof of buccal cavity (d) Tongue & floor of buccal cavity

Last Answer : (c) Tongue & roof of buccal cavity

The deep groove ball bearing has immense rigidity. (a) True (b) No, it has point contact and hence low rigidity (c) It has surface contact (d) It has line contact

Description : The deep groove ball bearing has immense rigidity. (a) True (b) No, it has point contact and hence low rigidity (c) It has surface contact (d) It has line contact

Last Answer : (b) No, it has point contact and hence low rigidity

Deep groove ball bearing has immense rigidity. a) True b) No it has point contact and hence low rigidity c) It has surface contact d) It has line contact

Description : Deep groove ball bearing has immense rigidity. a) True b) No it has point contact and hence low rigidity c) It has surface contact d) It has line contact

Last Answer : b) No it has point contact and hence low rigidity

How does the app "Groove Music" work?

Description : How does the app "Groove Music" work?

Last Answer : Prime example just came on. Where in the Hell did This come from? Damned sure I didn’t load it onto my computer at any point and I know I did not purchase a copy.

What is another way of saying "getting your groove back"?

Description : What is another way of saying "getting your groove back"?

Last Answer : back in the saddle again

Is there an open source application that is similar to Microsoft Office Groove?

Description : Is there an open source application that is similar to Microsoft Office Groove?

Last Answer : That’s a tough one. The only thing that comes to mind is using Google Docs or a similar online office suite that offers sharing of documents. Depending on what you want to use Groove for that may work.

Any woodworkers (or others) how to cut this groove?

Description : Any woodworkers (or others) how to cut this groove?

Last Answer : Use a drill to cut a hole at each end of the slot, then chisel it out.

Why do some fruits have a groove on the side them?

Description : Why do some fruits have a groove on the side them?

Last Answer : Hmm. Probably because the fruit meat grows around a large, central seed (the pit found in peaches and plums).

Why is there a groove on the tire surface of the car ?

Description : Why is there a groove on the tire surface of the car ?

Last Answer : The surface of the car tire is grooved to maximize the frictional force between the road and the tire. The tire surface is grooved to reduce the rotation of the wheel by increasing the frictional force ... the friction force due to this groove, the better the speed of the vehicle can be controlled.

Patellar groove is found on which bone `:-`

Description : Patellar groove is found on which bone `:-`

Last Answer : Patellar groove is found on which bone `:-` A. Femur B. Tibio-fibula C. Depression between femur and tibio-fibula D. Tarsus

$ Dinoflagellates have two grooves in the cell wall. ! There are many flagella in each groove.

Description : $ Dinoflagellates have two grooves in the cell wall. ! There are many flagella in each groove.

Last Answer : $ Dinoflagellates have two grooves in the cell wall. ! There are many flagella in each groove. A. If both ... is wrong D. If both As and R are wrong.

$ In the cell wall of Dinoflagellates, there is present only one groove. ! Diatoms have two flagella.

Description : $ In the cell wall of Dinoflagellates, there is present only one groove. ! Diatoms have two flagella.

Last Answer : $ In the cell wall of Dinoflagellates, there is present only one groove. ! Diatoms have two flagella. A. ... is wrong D. If both As and R are wrong.

Deltoid groove is present in

Description : Deltoid groove is present in

Last Answer : Deltoid groove is present in A. Radio-ulna B. Femur C. Tibio-fibula D. Humerus

What is a deep groove down in the ground?

Description : What is a deep groove down in the ground?

Last Answer : Need answer

A groove or a crack-like sore is called a (an. A. fissure B. nodule C. polyp D. ulcer

Description : A groove or a crack-like sore is called a (an. A. fissure B. nodule C. polyp D. ulcer

Last Answer : Ans: A

The deepest place on earth is ------? A. Trench B. Mariana Trench (Answer) C. Mangrove D. Groove E. None of these

Description : The deepest place on earth is ------? A. Trench B. Mariana Trench (Answer) C. Mangrove D. Groove E. None of these

Last Answer : B. Mariana Trench (Answer)

A cylinder roller creates lesser noise than a deep groove ball bearing. (a) True (b) False

Description : A cylinder roller creates lesser noise than a deep groove ball bearing. (a) True (b) False

Last Answer : (b) False

Which of the bearings given below SHOULD NOT be subjected to a thrust load? (a) Deep groove ball bearing (b) Angular contact ball bearing (c) Cylindrical (straight) roller bearing (d) Single row tapered roller bearing

Description : Which of the bearings given below SHOULD NOT be subjected to a thrust load? (a) Deep groove ball bearing (b) Angular contact ball bearing (c) Cylindrical (straight) roller bearing (d) Single row tapered roller bearing

Last Answer : (c) Cylindrical (straight) roller bearing

Cylindrical roller bearing has a lower load capacity as compared to deep groove ball bearing. (a) True (b) False

Description : Cylindrical roller bearing has a lower load capacity as compared to deep groove ball bearing. (a) True (b) False

Last Answer : (b) False

Deep groove ball bearings are used for (a) heavy thrust load only (b) the small angular displacement of shafts (c) radial load at high speed (d) combined thrust and radial loads at high speed

Description : Deep groove ball bearings are used for (a) heavy thrust load only (b) the small angular displacement of shafts (c) radial load at high speed (d) combined thrust and radial loads at high speed

Last Answer : (d) combined thrust and radial loads at high speed

There is a problem of alignment in deep groove ball bearings. (a) Yes (b) No, it is self-aligning (c) It aligns itself only in some particular cases (d) Can’t be determined

Description : There is a problem of alignment in deep groove ball bearings. (a) Yes (b) No, it is self-aligning (c) It aligns itself only in some particular cases (d) Can’t be determined

Last Answer : (a) Yes

Deep groove ball bearings create a lot of noise. (a) Yes (b) Depends on the application (c) They create very less noise (d) No reference frame for comparison is mentioned

Description : Deep groove ball bearings create a lot of noise. (a) Yes (b) Depends on the application (c) They create very less noise (d) No reference frame for comparison is mentioned

Last Answer : (c) They create very less noise

Match List-I (Type of Anti-friction bearing) with List-II (Specific Use) and select the using the code given below the Lists: [IES-2006] List-I List -II A. Self-aligning ball bearing 1. For pure axial load B. Taper roller bearing 2. For hinged condition C. Deep groove ball bearing 3. For pure radial load D. Thrust ball bearing 4. For axial and radial load A B C D A B C D (a) 2 1 3 4 (b) 3 4 2 1 (c) 2 4 3 1 (d) 3 1 2 4

Description : Match List-I (Type of Anti-friction bearing) with List-II (Specific Use) and select the using the code given below the Lists: [IES-2006] List-I List -II A. Self-aligning ball bearing 1. For pure axial load B. Taper roller bearing 2. For ... C D (a) 2 1 3 4 (b) 3 4 2 1 (c) 2 4 3 1 (d) 3 1 2 4

Last Answer : (c) 2 4 3 1

Cylinder roller creates lesser noise than deep groove ball bearing. a) True b) False

Description : Cylinder roller creates lesser noise than deep groove ball bearing. a) True b) False

Last Answer : b) False

Cylindrical load bearing has lower load capacity as compared to deep groove ball bearing. a) True b) False

Description : Cylindrical load bearing has lower load capacity as compared to deep groove ball bearing. a) True b) False

Last Answer : b) False

There is problem of alignment in deep groove ball bearings. a) Yes b) No, it is self-aligning c) It aligns itself only in some particular cases d) Can’t be determined

Description : There is problem of alignment in deep groove ball bearings. a) Yes b) No, it is self-aligning c) It aligns itself only in some particular cases d) Can’t be determined

Last Answer : a) Yes

Deep groove ball bearings creates a lot of noise. a) Yes b) They create very less noise c) Depends on the application d) No reference frame for comparison is mentioned

Description : Deep groove ball bearings creates a lot of noise. a) Yes b) They create very less noise c) Depends on the application d) No reference frame for comparison is mentioned

Last Answer : b) They create very less noise

Type of welded joint which do not exit (i) Groove type (ii) Spot type (iii)Plug type (iv) Surface type

Description : Type of welded joint which do not exit (i) Groove type (ii) Spot type (iii)Plug type (iv) Surface type

Last Answer : (iv) Surface type

In which case, molten metal is used to do welding? (i) Groove type (ii) spot type (iii) Plug type (iv) None

Description : In which case, molten metal is used to do welding? (i) Groove type (ii) spot type (iii) Plug type (iv) None

Last Answer : (iii) Plug type

Balls and the races of the deep groove ball may roll freely without any sliding. a) True b) False

Description : Balls and the races of the deep groove ball may roll freely without any sliding. a) True b) False

Last Answer : a) True

How shall the ring groove number be indicated on the edge of the ring groove flange? a) Just the ring groove number. b) The ring groove number is preceded by"R". c) The ring groove number is marked on the face. d) The ring groove number is marked at the bottom of the ring groove.

Description : How shall the ring groove number be indicated on the edge of the ring groove flange? a) Just the ring groove number. b) The ring groove number is preceded by"R". c) The ring groove number is marked on the face. d) The ring groove number is marked at the bottom of the ring groove.

Last Answer : b) The ring groove number is preceded by"R".