What is a deep groove down in the ground?

What is a deep groove down in the ground?
by

1 Answer

Answer :

Need answer
by

Related questions

A cylinder roller creates lesser noise than a deep groove ball bearing. (a) True (b) False

Description : A cylinder roller creates lesser noise than a deep groove ball bearing. (a) True (b) False

Last Answer : (b) False

Which of the bearings given below SHOULD NOT be subjected to a thrust load? (a) Deep groove ball bearing (b) Angular contact ball bearing (c) Cylindrical (straight) roller bearing (d) Single row tapered roller bearing

Description : Which of the bearings given below SHOULD NOT be subjected to a thrust load? (a) Deep groove ball bearing (b) Angular contact ball bearing (c) Cylindrical (straight) roller bearing (d) Single row tapered roller bearing

Last Answer : (c) Cylindrical (straight) roller bearing

Cylindrical roller bearing has a lower load capacity as compared to deep groove ball bearing. (a) True (b) False

Description : Cylindrical roller bearing has a lower load capacity as compared to deep groove ball bearing. (a) True (b) False

Last Answer : (b) False

Deep groove ball bearings are used for (a) heavy thrust load only (b) the small angular displacement of shafts (c) radial load at high speed (d) combined thrust and radial loads at high speed

Description : Deep groove ball bearings are used for (a) heavy thrust load only (b) the small angular displacement of shafts (c) radial load at high speed (d) combined thrust and radial loads at high speed

Last Answer : (d) combined thrust and radial loads at high speed

The deep groove ball bearing has immense rigidity. (a) True (b) No, it has point contact and hence low rigidity (c) It has surface contact (d) It has line contact

Description : The deep groove ball bearing has immense rigidity. (a) True (b) No, it has point contact and hence low rigidity (c) It has surface contact (d) It has line contact

Last Answer : (b) No, it has point contact and hence low rigidity

There is a problem of alignment in deep groove ball bearings. (a) Yes (b) No, it is self-aligning (c) It aligns itself only in some particular cases (d) Can’t be determined

Description : There is a problem of alignment in deep groove ball bearings. (a) Yes (b) No, it is self-aligning (c) It aligns itself only in some particular cases (d) Can’t be determined

Last Answer : (a) Yes

Deep groove ball bearings create a lot of noise. (a) Yes (b) Depends on the application (c) They create very less noise (d) No reference frame for comparison is mentioned

Description : Deep groove ball bearings create a lot of noise. (a) Yes (b) Depends on the application (c) They create very less noise (d) No reference frame for comparison is mentioned

Last Answer : (c) They create very less noise

Match List-I (Type of Anti-friction bearing) with List-II (Specific Use) and select the using the code given below the Lists: [IES-2006] List-I List -II A. Self-aligning ball bearing 1. For pure axial load B. Taper roller bearing 2. For hinged condition C. Deep groove ball bearing 3. For pure radial load D. Thrust ball bearing 4. For axial and radial load A B C D A B C D (a) 2 1 3 4 (b) 3 4 2 1 (c) 2 4 3 1 (d) 3 1 2 4

Description : Match List-I (Type of Anti-friction bearing) with List-II (Specific Use) and select the using the code given below the Lists: [IES-2006] List-I List -II A. Self-aligning ball bearing 1. For pure axial load B. Taper roller bearing 2. For ... C D (a) 2 1 3 4 (b) 3 4 2 1 (c) 2 4 3 1 (d) 3 1 2 4

Last Answer : (c) 2 4 3 1

Cylinder roller creates lesser noise than deep groove ball bearing. a) True b) False

Description : Cylinder roller creates lesser noise than deep groove ball bearing. a) True b) False

Last Answer : b) False

Cylindrical load bearing has lower load capacity as compared to deep groove ball bearing. a) True b) False

Description : Cylindrical load bearing has lower load capacity as compared to deep groove ball bearing. a) True b) False

Last Answer : b) False

Deep groove ball bearing has immense rigidity. a) True b) No it has point contact and hence low rigidity c) It has surface contact d) It has line contact

Description : Deep groove ball bearing has immense rigidity. a) True b) No it has point contact and hence low rigidity c) It has surface contact d) It has line contact

Last Answer : b) No it has point contact and hence low rigidity

There is problem of alignment in deep groove ball bearings. a) Yes b) No, it is self-aligning c) It aligns itself only in some particular cases d) Can’t be determined

Description : There is problem of alignment in deep groove ball bearings. a) Yes b) No, it is self-aligning c) It aligns itself only in some particular cases d) Can’t be determined

Last Answer : a) Yes

Deep groove ball bearings creates a lot of noise. a) Yes b) They create very less noise c) Depends on the application d) No reference frame for comparison is mentioned

Description : Deep groove ball bearings creates a lot of noise. a) Yes b) They create very less noise c) Depends on the application d) No reference frame for comparison is mentioned

Last Answer : b) They create very less noise

Balls and the races of the deep groove ball may roll freely without any sliding. a) True b) False

Description : Balls and the races of the deep groove ball may roll freely without any sliding. a) True b) False

Last Answer : a) True

how deep does the tea rose roots go down in the ground?

Description : how deep does the tea rose roots go down in the ground?

Last Answer : You should have no problem with the tea roses. They don't go deeper than 2-3 feet. You should, however plant them only deep enough so that their crown,( the point were the stems all interesect ) is just above ground level. Any deeper and it may not grow well.

I grow on trees, I make some people wheeze. I can be brown or black, I can be used as a snack. Some animals bite me, some animals hide me. They save me for Winter deep in the ground, the start to dig down down down. For humans I have a very good taste, sometimes they throw out a part in the waste! What am I? -Riddles

Description : I grow on trees, I make some people wheeze. I can be brown or black, I can be used as a snack. Some animals bite me, some animals hide me. They save me for Winter deep in the ground, the start ... For humans I have a very good taste, sometimes they throw out a part in the waste! What am I? -Riddles

Last Answer : A nut!

When forests are cut or burned down a) Water can flow away very quickly and cause mudslides b) Nutrients are washed deep into the soil c) Water stands in fields and cannot flow away d) Rainfall can get into the ground more quickly

Description : When forests are cut or burned down a) Water can flow away very quickly and cause mudslides b) Nutrients are washed deep into the soil c) Water stands in fields and cannot flow away d) Rainfall can get into the ground more quickly

Last Answer : a) Water can flow away very quickly and cause mudslides

What would you do if you were remodeling and at one point uncovered the original floor and discovered it's tongue and groove oak?

Description : What would you do if you were remodeling and at one point uncovered the original floor and discovered it's tongue and groove oak?

Last Answer : I would laminate over it.

How does the app "Groove Music" work?

Description : How does the app "Groove Music" work?

Last Answer : Prime example just came on. Where in the Hell did This come from? Damned sure I didn’t load it onto my computer at any point and I know I did not purchase a copy.

What is another way of saying "getting your groove back"?

Description : What is another way of saying "getting your groove back"?

Last Answer : back in the saddle again

Is there an open source application that is similar to Microsoft Office Groove?

Description : Is there an open source application that is similar to Microsoft Office Groove?

Last Answer : That’s a tough one. The only thing that comes to mind is using Google Docs or a similar online office suite that offers sharing of documents. Depending on what you want to use Groove for that may work.

Any woodworkers (or others) how to cut this groove?

Description : Any woodworkers (or others) how to cut this groove?

Last Answer : Use a drill to cut a hole at each end of the slot, then chisel it out.

Why do some fruits have a groove on the side them?

Description : Why do some fruits have a groove on the side them?

Last Answer : Hmm. Probably because the fruit meat grows around a large, central seed (the pit found in peaches and plums).

Why is there a groove on the tire surface of the car ?

Description : Why is there a groove on the tire surface of the car ?

Last Answer : The surface of the car tire is grooved to maximize the frictional force between the road and the tire. The tire surface is grooved to reduce the rotation of the wheel by increasing the frictional force ... the friction force due to this groove, the better the speed of the vehicle can be controlled.

Patellar groove is found on which bone `:-`

Description : Patellar groove is found on which bone `:-`

Last Answer : Patellar groove is found on which bone `:-` A. Femur B. Tibio-fibula C. Depression between femur and tibio-fibula D. Tarsus

$ Dinoflagellates have two grooves in the cell wall. ! There are many flagella in each groove.

Description : $ Dinoflagellates have two grooves in the cell wall. ! There are many flagella in each groove.

Last Answer : $ Dinoflagellates have two grooves in the cell wall. ! There are many flagella in each groove. A. If both ... is wrong D. If both As and R are wrong.

$ In the cell wall of Dinoflagellates, there is present only one groove. ! Diatoms have two flagella.

Description : $ In the cell wall of Dinoflagellates, there is present only one groove. ! Diatoms have two flagella.

Last Answer : $ In the cell wall of Dinoflagellates, there is present only one groove. ! Diatoms have two flagella. A. ... is wrong D. If both As and R are wrong.

Deltoid groove is present in

Description : Deltoid groove is present in

Last Answer : Deltoid groove is present in A. Radio-ulna B. Femur C. Tibio-fibula D. Humerus

A groove or a crack-like sore is called a (an. A. fissure B. nodule C. polyp D. ulcer

Description : A groove or a crack-like sore is called a (an. A. fissure B. nodule C. polyp D. ulcer

Last Answer : Ans: A

The deepest place on earth is ------? A. Trench B. Mariana Trench (Answer) C. Mangrove D. Groove E. None of these

Description : The deepest place on earth is ------? A. Trench B. Mariana Trench (Answer) C. Mangrove D. Groove E. None of these

Last Answer : B. Mariana Trench (Answer)

Type of welded joint which do not exit (i) Groove type (ii) Spot type (iii)Plug type (iv) Surface type

Description : Type of welded joint which do not exit (i) Groove type (ii) Spot type (iii)Plug type (iv) Surface type

Last Answer : (iv) Surface type

In which case, molten metal is used to do welding? (i) Groove type (ii) spot type (iii) Plug type (iv) None

Description : In which case, molten metal is used to do welding? (i) Groove type (ii) spot type (iii) Plug type (iv) None

Last Answer : (iii) Plug type

What is the maximum surface roughness for tongue and groove and small male and female gasket surfaces? a) 63 µ in b) 125 µ in c) 250 µ in d) 400 µ in

Description : What is the maximum surface roughness for tongue and groove and small male and female gasket surfaces? a) 63 µ in b) 125 µ in c) 250 µ in d) 400 µ in

Last Answer : b) 125 µ in

How shall the ring groove number be indicated on the edge of the ring groove flange? a) Just the ring groove number. b) The ring groove number is preceded by"R". c) The ring groove number is marked on the face. d) The ring groove number is marked at the bottom of the ring groove.

Description : How shall the ring groove number be indicated on the edge of the ring groove flange? a) Just the ring groove number. b) The ring groove number is preceded by"R". c) The ring groove number is marked on the face. d) The ring groove number is marked at the bottom of the ring groove.

Last Answer : b) The ring groove number is preceded by"R".

In respect to Class V A. it occurs on the buccal groove (fissure) B. it occurs on the lingual groove (fissure) C. it is a result of bad oral hygiene

Description : In respect to Class V A. it occurs on the buccal groove (fissure) B. it occurs on the lingual groove (fissure) C. it is a result of bad oral hygiene

Last Answer : C. it is a result of bad oral hygiene

When is a gingival groove LEAST required: A. When restoring with GIC for abrasion B. When restoring with GIC for root caries C. When restoring with GIC base and composite lamination D. When restoring with amalgam

Description : When is a gingival groove LEAST required: A. When restoring with GIC for abrasion B. When restoring with GIC for root caries C. When restoring with GIC base and composite lamination D. When restoring with amalgam

Last Answer : C. When restoring with GIC base and composite lamination

Benign migratory glossitis or Geographic Tongue, manifests itself in the oral cavity as, A. Irregularly outlined areas of hyperkeratosis of the dorsal surface of the tongue B. Furrows outlined the dorsal surface radiating out from a central groove in the centre of the tongue C. Loss (atrophy) of filiform papillae in multiple irregularly outlined areas D. Irregularly outlined erythematous area of hyper trophic fungiform E. A fibrinous exudate on the dorsal surface F. Grooves (fissures) radiating from a central fissure G. Irregular area in the midline of the tongue

Description : Benign migratory glossitis or Geographic Tongue, manifests itself in the oral cavity as, A. Irregularly outlined areas of hyperkeratosis of the dorsal surface of the tongue B. Furrows outlined the ... (fissures) radiating from a central fissure G. Irregular area in the midline of the tongue

Last Answer : C. Loss (atrophy) of filiform papillae in multiple irregularly outlined areas

Respiratory tree of sea cucumber is located at a) Mouth b) Cloaca c) Stomach d) Ambulacral groove

Description : Respiratory tree of sea cucumber is located at a) Mouth b) Cloaca c) Stomach d) Ambulacral groove

Last Answer : d) Ambulacral groove

Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Description : Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Last Answer : (i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter. (ii) Parting off: Slitting Cutter (iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key ... milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 

Deep green ground cover with purple flower found in Mexico

Description : Deep green ground cover with purple flower found in Mexico

Last Answer : Need Answer

how deep does radishs need to go in the ground?

Description : how deep does radishs need to go in the ground?

Last Answer : about 1/2 inch deep and about 1 inch apart....plant & gently water.

The depth of the water table at a place is 45 m below the general ground level. To lift water from a deep tube well in such a locality, the type of pump to be installed is (A) Centrifugal pump (B) Reciprocating pump (C) Deep well turbine pump (D) None of these

Description : The depth of the water table at a place is 45 m below the general ground level. To lift water from a  deep tube well in such a locality, the type of pump to be installed is  (A) Centrifugal pump  (B) Reciprocating pump  (C) Deep well turbine pump  (D) None of these 

Last Answer : (C) Deep well turbine pump

This type blades in rotary tiller are Suitable for deep tillage in relatively clean ground, but clogging and wrapping of trashes on the tynes and shafts. a. L c. straight d. None of the above

Description : This type blades in rotary tiller are Suitable for deep tillage in relatively clean ground, but clogging and wrapping of trashes on the tynes and shafts. a. L c. straight d. None of the above

Last Answer : Ans-  b. twisted

What is something you know deep down but don’t want to admit to yourself?

Description : What is something you know deep down but don’t want to admit to yourself?

Last Answer : I'm not a good person.

how deep do tomato roots grow down

Description : how deep do tomato roots grow down

Last Answer : 1 foot......add mulch, lime and cow manure.......and we added bundles of hay and grass and leaves................we used a tiller.................sprinkle everything over the ground and take your time and till under.....it is easier in the early fall to do this.

I am never quite what I appear to be. Straight-forward I seem, but it's only skin deep, for mystery most often lies beneath my simple speech. Sharpen your wits, open your eyes, look beyond my exteriors, read me backwards, forwards, upside down. Think critically and answer the question.What am I? -Riddles

Description : I am never quite what I appear to be. Straight-forward I seem, but it's only skin deep, for mystery most often lies beneath my simple speech. Sharpen your wits, open your eyes, look beyond ... , read me backwards, forwards, upside down. Think critically and answer the question.What am I? -Riddles

Last Answer : I am a Riddle!

Walking home one day, you take a short cut along the train tracks. The tracks cross a narrow bridge over a deep gorge. At the point you are 3/8 of the way across the bridge, you hear the train whistle somewhere behind you. You charge across the bridge, and jump off the track as the train is about to run you down. As it happens, if you had gone the other way, you would have reached safety just before being run over as well. If you can run ten miles per hour, how fast is the train moving? -Riddles

Description : Walking home one day, you take a short cut along the train tracks. The tracks cross a narrow bridge over a deep gorge. At the point you are 3/8 of the way across the bridge, you hear the train whistle ... run over as well. If you can run ten miles per hour, how fast is the train moving? -Riddles

Last Answer : The train is moving at 40 miles per hour. Imagine that a friend is walking with you. When the train whistle blows, you head away from the train, he heads toward it. When he reaches safety, you ... the bridge in the time you cross the remaining 1/4, the train must be moving four times your speed.

How deep down does top soil go in Minnesota?

Description : How deep down does top soil go in Minnesota?

Last Answer : Most soils in Minnesota have been forming for more than 10,000 years. So the topsoil will vary depending on where in the state you live and how much of the earth has been previously landscaped.

Sally has a pet snail that fell into a well. the well is 16 feet deep. each day, the snail climbs up 5 feet but each night it slides down 4 feet. how many days will it take sallys snail to get to the top of the well?

Description : Sally has a pet snail that fell into a well. the well is 16 feet deep. each day, the snail climbs up 5 feet but each night it slides down 4 feet. how many days will it take sallys snail to get to the top of the well?

Last Answer : 16 days