CAT Scanners can detect density differences of the order of
a) 50 percent b) 10 percent c) 1 percent d) 40 percent

1 Answer

Answer :

c) 1 percent

Related questions

Description : The termresponsivityasit appliesto a light detectorisbest described as a. the time required for the signal to go from 10 to 90 percent of maximum amplitude b.the ratio ofthediode output currentto ... of output current to output power d. the ratio of output current to input current

Last Answer : b.the ratio ofthediode output currentto opticalinputpower

Description : What are the differences between synchronous and induction motor?*

Last Answer : Synchronous motor : Constant speed on all loads, can be operated on a wide range of power factors, not self starting, requires dc excitation.

Description : All electrical appliances are connected in parallel to each other between the main line and neutral wire to get a. same current b. same current and potential difference c. different current but same potential difference d. different current and potential differences

Last Answer : c. different current but same potential difference

Description : Current gain of a transistor which has collector current of 10 mA and a base current of 40 micro Ampere is: (a) 25 (b) 250 (c) 2500 (d) 25000

Last Answer : b) 250

Description : Three equal resistors connected in series with a source of e m f together dissipate 10 W of power each. What will be the power dissipated if the same resistors are connected in parallel across the same source of e m f? a. 40 W b. 90W c. 100W d. 120W

Last Answer : b. 90W

Description : EMDis best describe bywhich statement? a. 70percentofthe corediameter and70%ofthefiberNAshouldbe filled with light b.70 percent of the fiber diameter and 70% of the cone of acceptance should be filled with ... the output d.70 percent of the unwanted wavelengths should be attenuated by the fiber

Last Answer : a. 70percentofthe corediameter and70%ofthefiberNAshouldbe filled with light

Description : Three dimensional CAT Scans reveal the cyst called ______ within the skull. a) arachnoid cyst b) epidermoid cyst c) ganglion cyst d) chalazia cyst

Last Answer : a) arachnoid cyst

Description : CAT is the abbreviation of a) computerized axial topology b) computerized atomic topology c) computerized axial tomography d) computerized atomic tomography

Last Answer : c) computerized axial tomography

Description : Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Last Answer : (A) 1-5

Description : Please ripley me due to emergency

Last Answer : To calculate the flux density in the ring, you need to use the following formula: B = (μ * I * N) / (2 * π * r) where: B is the flux density in the ring (in teslas) μ is the relative permeability ... 2 * π * 0.127 m) = 0.53 T So the flux density in the ring would be approximately 0.53 teslas.

Description : Materials subjected to rapid reversal of magnetism should have (a) large area oiB-H loop (b) high permeability and low hysteresis loss (c) high co-ercivity and high retentivity (d) high co-ercivity and low density

Last Answer : (b) high permeability and low hysteresis loss

Description : The ratio of intensity of magnetisation to the magnetisation force is known as (a) flux density (b) susceptibility (c) relative permeability (d) none of the above

Last Answer : (b) susceptibility

Description : Which of the following is a vector quantity ? (a) Relative permeability (b) Magnetic field intensity (c) Flux density (d) Magnetic potential

Last Answer : (b) Magnetic field intensity

Description : Tesla is a unit of (a) field strength (b) inductance (c) flux density (d) flux

Last Answer : (c) flux density

Description : Energy stored per unit volume inside the solenoid is called: a. Energy density b. Charge Density c. Mass density d. Volume charge density

Last Answer : energy density is correct

Description : If magnetic field is doubled then magnetic energy density becomes: a. Four times b. Two times c. Three times d. Six times

Last Answer : c. Three times

Description : The energy density of an inductor is: a. B 2 / 2 μ2 b. B/ 2 μ c. B/ 2 μ2 d. B 2 / 2 μ

Last Answer : c. B/ 2 μ2

Description : The mutual inductance of the coil depends upon: a. density of the coil b. stiffness of coil c. material of coil d. geometry of the coil

Last Answer : d. geometry of the coil

Description : Which of the following does not equal the unit of magnetic flux density? a) 1 Wbm-2 b) 1 NA-1m -1 c) Both (a) and (b) d) 1 Wbm-1

Last Answer : d) 1 Wbm-1

Description : Whatisthe frequencylimitof copperwire? a. approximately 0.5 MHz b. approximately 1.0 MHz c. approximately 40 GHz d. None of the above

Last Answer : b. approximately 1.0 MHz

Description : A transformer steps down 220V to 40 volts. If the secondary turns are 40 then primary turns will be: a. 20 b. 40 c. 120 d. 220

Last Answer : d. 220V

Description : Three bulbs are rating 40W 60W and 100W designed to work on 220V mains. Which bulb will burn most brightly if they are connected in series across 220 V mains? a. 40 W bulb b. 60 W blub c. 100 W blub d. all will burn equally brightly

Last Answer : a. 40 W bulb

Description : Relativistic velocity is of the order of, a) 15 1 of the velocity of light b) 20 1 of the velocity of light c) 10 1 of the velocity of light d) All the above

Last Answer : d) All the above

Description : In transistor, the base region is of the order of _______ (a) 10-5 m (b) 10-2 m (c) 10-8 m (d) 10-6 m

Last Answer : d) 10-6 m

Description : Good conductors have conductivity of the order of a) 10–10 (m)–1 b) 10–7 (m)–1 c) 10 7 (m)–1 d) 10–9 (m)–1

Last Answer : c) 10 7 (m)–1

Description : he substances of conductivity of the order of 10–6 – 10–4 (m)–1 are : a) Insulators b) Super conductors c) Semiconductors d)Good conductors

Last Answer : d)Good conductors

Description : A galvanometer of 65 Ω resistance gives full scale deflection with 4 mA current. In order to convert it into ammeter, the range of 10 A is connected with it, the shunt resistance should be a) 0.1 Ω b) 0.2 Ω c) 0.06 Ω d) 0.03 Ω

Last Answer : d) 0.03 Ω

Description : Which ofthe followingcableswill have the highestlaunch power capability? a. 50/125/0.2 b. 85/125/0.275 c. 62.5/125/0.275 d. 100/140/0.3

Last Answer : d. 100/140/0.3

Description : 0.001 Kg mass will be equivalent to a) 2.50 Giga watt hour b) 25.00 giga watt hour c) 0.26 giga watt hour d) None of the above

Last Answer : b) 25.00 giga watt hour

Description : Alcohol content in freshly prepared natural and fortified wine may be respectively around __________ percent. (A) 7-14 and 14-30 (B) 7-14 and 40-50 (C) 14 - 30 and 40-50 (D) 10 - 20 and 40 - 50

Last Answer : (A) 7-14 and 14-30

Description : Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Last Answer : (B) 20 to 30

Description : When an iron piece is placed in a magnetic field (a) the magnetic lines of force will bend away from their usual paths in order to go away from the piece (b) the magnetic lines of force will bend ... to pass through the piece (c) the magnetic field will not be affected (d) the iron piece will break

Last Answer : (b) the magnetic lines of force will bend away from their usual paths in order to pass through the piece

Description : In order to obtain spectrum from the emitted radiation, the atomic gas or vapour must be excited at a) much less than atmospheric pressure b) much high than atmospheric pressure c) atmospheric pressure d) high pressure and temperature

Last Answer : a) much less than atmospheric pressure

Description : In the reverse biased p-n junction, the current is of the order of (a) Ampere (b) Milliampere (c) Microampere (d) Nano-ampere

Last Answer : (d) Nano-ampere

Description : A solid is which atoms are in a regular order is called a) Crystalline solid b) Amorphous solid c) Polymeric solid d) Glassy solid

Last Answer : a) Crystalline solid

Description : A galvanometer has resistance of 120 Ω. In order to pass 5% of the main current in it, the value of shunt resistance Rs must be equal to a) 6.3 Ω b) 6 Ω c) 2 Ω d) 2.3 Ω

Last Answer : a) 6.3 Ω

Description : In order to have a lower cost of electrical energy generation the load factor  (1) and the diversity factor should be low (2) should be low but the diversity factor should be high (3) should be high but the diversity factor should be low (4) and the diversity factor both should be high

Last Answer : In order to have a lower cost of electrical energy generation the load factor and the diversity factor both should be high

Description : why........Emily's family loves to work together in the garden. They have a slight preference for flowers, as 60, percent of their plants are flowers and 40, percent are vegetables. They have 50 plants growing in the garden.?

Last Answer : If you are asking how many of their plants are flowers and how many are vegetables I believe the answer is 30 flowers and 20 vegetables.50 (total number of plants) * 60% (percentage that are flowers) = 30 flowers50 (total number of plants) * 40% (percentage that are vegetables) = 20 vegetables

Description : What percent of the total number of girls in the college know Bangla? (1) 45 (2) 40 (3) 48 (4) 42 (5) 50

Last Answer : 5) 50

Description : The energy dissipated when a car hits a tree at 70 miles per hour is ABOUT how much greater than that dissipated at 50 miles per hour? w) 20 percent x) 40 percent y) 70 percent z) 100 percent

Last Answer : ANSWER: Z -- 100 PERCENT

Description : A 0-10 mA PMMC ammeter reads 5mA in a circuit; its bottom control spring snaps out suddenly the meter will now read. a) 5mA b) 10mA c) 2.5mA d) 0

Last Answer : Ans: 0

Description : The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Last Answer : Ans: 1/11

Description : Loss comparisons between fusionsplices andmechanicalsplices are a. 1:10 b. 10:1 c. 20:1 d. 1:20

Last Answer : a. 1:10

Description : In the phenomenon of Laser production, atom can reside in the meta stable state for a) ~ 10-3 s b) ~ 10-8 s c) ~ 10-4 s d) ~ 10-10 s

Last Answer : a) ~ 10-3 s

Description : In the phenomenon of Laser production, atom can reside in the excited state only for a) 10-6 s b) 10-7 s c) 10-8 s d) 10-9 s

Last Answer : c) 10-8 s

Description : A typical nucleus is less than _____ in diameter. a) 1010 m b) 10-10 m c) 1014 m d) 10 -14 m

Last Answer : d) 10 -14 m

Description : The radius of hydrogen atom is about a) 5 x 10-11 m b) 5 x 10-11 cm c) 5 x 10-11 mm d) 5 x 10-11 dm

Last Answer : a) 5 x 10-11 m

Description : The value of Rydberg’s constant is a) 1.0974 x 10-7 m-1 b) 1.0974 x 107 m-1 c) 1.0974 x 107 m-2 d) 1.0974 x 10-7 m-2

Last Answer : b) 1.0974 x 107 m-1

Description : Rest mass of the photon is a) Infinite b) Zero c) Very small d) 1.67  10-27 Kg

Last Answer : b) Zero

Description : The phenomena of pair production occurs only when the energy of incident photon is least equal a) 10.2 MeV b) 1.02 MeV c) 1.02 eV d) 0.102 MeV

Last Answer : b) 1.02 MeV