EMDis best describe bywhich statement? a. 70percentofthe corediameter and70%ofthefiberNAshouldbe filled with light b.70 percent of the fiber diameter and 70% of the cone of acceptance should be filled with light c.70 percent of input light should be measured at the output d.70 percent of the unwanted wavelengths should be attenuated by the fiber

EMDis best describe bywhich statement?
a. 70percentofthe corediameter and70%ofthefiberNAshouldbe filled with light b.70 percent of the fiber diameter and 70% of the cone of acceptance should be filled with light c.70 percent of input light should be measured at the output
d.70 percent of the unwanted wavelengths should be attenuated by the fiber
by

1 Answer

Answer :

a. 70percentofthe corediameter and70%ofthefiberNAshouldbe filled with light
by

Related questions

EMD is best described by which statement? ∙ A. 70 percent of the core diameter and 70% of the fiber NA should be filled with light. ∙ B. 70 percent of the fiber diameter and 70% of the cone of acceptance should be filled with light. ∙ C. 70 percent of input light should be measured at the output. ∙ D. 70 percent of the unwanted wavelengths should be attenuated by the fiber.

Description : EMD is best described by which statement? ∙ A. 70 percent of the core diameter and 70% of the fiber NA should be filled with light. ∙ B. 70 percent of the fiber diameter and 70% of the ... be measured at the output. ∙ D. 70 percent of the unwanted wavelengths should be attenuated by the fiber.

Last Answer : 70 percent of the core diameter and 70% of the fiber NA should be filled with light.

The termresponsivityasit appliesto a light detectorisbest described as a. the time required for the signal to go from 10 to 90 percent of maximum amplitude b.the ratio ofthediode output currentto opticalinputpower c. the ratio of output current to output power d. the ratio of output current to input current

Description : The termresponsivityasit appliesto a light detectorisbest described as a. the time required for the signal to go from 10 to 90 percent of maximum amplitude b.the ratio ofthediode output currentto ... of output current to output power d. the ratio of output current to input current

Last Answer : b.the ratio ofthediode output currentto opticalinputpower

The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber. ∙ A. Acceptance cone half-angle ∙ B. Acceptance cone ∙ C. Critical angle ∙ D. Angle of incidence

Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber. ∙ A. Acceptance cone half-angle ∙ B. Acceptance cone ∙ C. Critical angle ∙ D. Angle of incidence

Last Answer : A. Acceptance cone half-angle

The reflective index numberis a. anumberwhichcomparesthe transparencyof amaterialwiththatof air b. a number assigned by the manufacturer to the fiber in question c. a number which determines the core diameter d. a term for describing core elasticity

Description : The reflective index numberis a. anumberwhichcomparesthe transparencyof amaterialwiththatof air b. a number assigned by the manufacturer to the fiber in question c. a number which determines the core diameter d. a term for describing core elasticity

Last Answer : a. anumberwhichcomparesthe transparencyof amaterialwiththatof air

The fact that the spectrum of any element contains wavelengths that exhibit definite regularities was ` utilized in the second half of the _______in identifying different elements. a) 16th century b) 17th century c) 18th century d) 19th century

Description : The fact that the spectrum of any element contains wavelengths that exhibit definite regularities was ` utilized in the second half of the _______in identifying different elements. a) 16th century b) 17th century c) 18th century d) 19th century

Last Answer : d) 19th century

The branch of physics that deals with the investigation of wavelengths of electro magnetic radiation emitted or absorbed by atoms is known as a) spectroscopy b) astroscopy c) radioscopy d) stereoscopy

Description : The branch of physics that deals with the investigation of wavelengths of electro magnetic radiation emitted or absorbed by atoms is known as a) spectroscopy b) astroscopy c) radioscopy d) stereoscopy

Last Answer : a) spectroscopy

Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or load resistor B. noise factor expressed in decibels C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signal D. S/N of an ideal system divided by S/N at the output of the receiver or amplifier under test, both working at the same temperature over the same bandwidth and fed from the same source

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. a. Acceptance angle b. Modes c. Sensors d. Aperture

Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. a. Acceptance angle b. Modes c. Sensors d. Aperture

Last Answer : b. Modes

Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture

Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture

Last Answer : b. Modes

The circuit which changes input signal at output with phase shift of 1800 is called (a) Amplifier (b) operational amplifier (c) switch (d) inverter

Description : The circuit which changes input signal at output with phase shift of 1800 is called (a) Amplifier (b) operational amplifier (c) switch (d) inverter

Last Answer : (d) inverter

Non-inverting amplifier circuits have _______ (a) Very high input impedance (b) very low input impedance (c) low output impedance (d) none of above

Description : Non-inverting amplifier circuits have _______ (a) Very high input impedance (b) very low input impedance (c) low output impedance (d) none of above

Last Answer : (a) Very high input impedance

Permanent loss in a Venturimeter is about __________ percent of the pressure drop in the upstream cone. (A) 1 (B) 10 (C) 40 (D) 70

Description : Permanent loss in a Venturimeter is about __________ percent of the pressure drop in the upstream cone. (A) 1 (B) 10 (C) 40 (D) 70

Last Answer : (B) 10

The speed of light through a single-mode optical fiber is approximately: w) c (equal to 3 x 108 m/s) x) 70 percent of c y) 80 percent of c z) 90 percent of c

Description : The speed of light through a single-mode optical fiber is approximately: w) c (equal to 3 x 108 m/s) x) 70 percent of c y) 80 percent of c z) 90 percent of c

Last Answer : ANSWER: X -- 70 PERCENT OF c

The claddingwhichsurroundsthe fiber core a. is used to reduce optical interference b. is used to protect the fiber c. acts to help guide the light in the core d. ensures that the refractive index remains constant

Description : The claddingwhichsurroundsthe fiber core a. is used to reduce optical interference b. is used to protect the fiber c. acts to help guide the light in the core d. ensures that the refractive index remains constant

Last Answer : c. acts to help guide the light in the core

A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100

Description : A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100

Last Answer : (A) 10-15

Acceptance testing means A. Testing performed on a single stand – alone module or unit of code B. Testing after changes have been made to ensure that no unwanted changes were introduced C. Testing to ensure that the system meets the needs of the organization and end user. D. Users test the application in the developers environment

Description : Acceptance testing means A. Testing performed on a single stand - alone module or unit of code B. Testing after changes have been made to ensure that no unwanted changes were introduced C. ... the needs of the organization and end user. D. Users test the application in the developers environment

Last Answer : C. Testing to ensure that the system meets the needs of the organization and end user.

The band above the valance band is called: a) Conduction band b) Filled band c) Forbidden band d) occupied band

Description : The band above the valance band is called: a) Conduction band b) Filled band c) Forbidden band d) occupied band

Last Answer : a) Conduction band

We use the output of the requirement analysis, the requirement specification as the input for writing :- a) User Acceptance Test Cases b) Integration Level Test Cases c) Unit Level Test Cases d) Program specifications

Description : We use the output of the requirement analysis, the requirement specification as the input for writing :- a) User Acceptance Test Cases b) Integration Level Test Cases c) Unit Level Test Cases d) Program specifications

Last Answer : a) User Acceptance Test Cases

The term responsivity as it applies to a light detector is best described as ∙ A. the time required for the signal to go from 10 to 90 percent of maximum amplitude ∙ B. the ratio of the diode output current to the input optical power ∙ C. the ratio of the input power to output power ∙ D. the ratio of output current to input current

Description : The term responsivity as it applies to a light detector is best described as ∙ A. the time required for the signal to go from 10 to 90 percent of maximum amplitude ∙ B. the ratio of the diode ... . the ratio of the input power to output power ∙ D. the ratio of output current to input current

Last Answer : the ratio of the diode output current to the input optical power

Optical Fiber What ?

Last Answer : Optical Fiber Holo - glass Or Of plastic Too much Narrow , long Flexible But Solid Fiber Or Fiber. One Place From Other In place Electric Signal Exchange Of payment For Optical Fiber Use To do Is.

When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity

Description : When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity

Last Answer : d. Detector sensitivity

The termssinglemode andmultimode are bestdescribes as a. the number of fibers placed into a fiber-optic cable b. the number of voice channels each fiber can support c.thenumber ofwavelengths eachfiber cansupport d. the index number

Description : The termssinglemode andmultimode are bestdescribes as a. the number of fibers placed into a fiber-optic cable b. the number of voice channels each fiber can support c.thenumber ofwavelengths eachfiber cansupport d. the index number

Last Answer : c.thenumber ofwavelengths eachfiber cansupport

Asingle fiber can handle asmanyvoice channel as a. a pair of copper conductors b. a1500-pair cable c. a 500-pair cable d. a 1000-pair cable

Description : Asingle fiber can handle asmanyvoice channel as a. a pair of copper conductors b. a1500-pair cable c. a 500-pair cable d. a 1000-pair cable

Last Answer : b. a1500-pair cable

A light ray incident on the optical fiber core is propagated along the fiber. Is the angle of incidence of the light ray entering the fiber larger or smaller than the acceptance angle

Description : A light ray incident on the optical fiber core is propagated along the fiber. Is the angle of incidence of the light ray entering the fiber larger or smaller than the acceptance angle

Last Answer : Smaller.

CAT Scanners can detect density differences of the order of a) 50 percent b) 10 percent c) 1 percent d) 40 percent

Description : CAT Scanners can detect density differences of the order of a) 50 percent b) 10 percent c) 1 percent d) 40 percent

Last Answer : c) 1 percent

Delay differences between the source wavelengths occur as the optical signal propagates along the fiber. What is this called?

Description : Delay differences between the source wavelengths occur as the optical signal propagates along the fiber. What is this called?

Last Answer : Differential group delay t(l).

The term single mode and multimode are best described as ∙ A. a number of fibers placed into fiber-optic cable ∙ B. the number of voice channels each fiber can support ∙ C. the number of wavelengths each fiber can support ∙ D. the index number

Description : The term single mode and multimode are best described as ∙ A. a number of fibers placed into fiber-optic cable ∙ B. the number of voice channels each fiber can support ∙ C. the number of wavelengths each fiber can support ∙ D. the index number

Last Answer : C. the number of wavelengths each fiber can support

Why ELCB cannot work if Neutral input of ELCB does not connect to ground?

Description : Why ELCB cannot work if Neutral input of ELCB does not connect to ground?

Last Answer : ▪ ELCB is used to detect earth leakage fault. Once the phase and neutral are connected in an ELCB, the current will flow through phase and that same current will have to return neutral so ... that full fault current will come back through ELCB, and there will be no difference in current.

The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Description : The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Last Answer : Ans: 1/11

Top loadingissometimesusedwithan antenna in ordertoincrease its a. effective height b. bandwidth c. beamwidth d. input capacitance

Description : Top loadingissometimesusedwithan antenna in ordertoincrease its a. effective height b. bandwidth c. beamwidth d. input capacitance

Last Answer : a. effective height

A typical nucleus is less than _____ in diameter. a) 1010 m b) 10-10 m c) 1014 m d) 10 -14 m

Description : A typical nucleus is less than _____ in diameter. a) 1010 m b) 10-10 m c) 1014 m d) 10 -14 m

Last Answer : d) 10 -14 m

A metallic hallow sphere of 8cm diameter is charged with 4 × 10−8c. The potential on its surface will be: (a) 90 volts (b) 9 volts (c) 9000 volts (d) 900 volts

Description : A metallic hallow sphere of 8cm diameter is charged with 4 × 10−8c. The potential on its surface will be: (a) 90 volts (b) 9 volts (c) 9000 volts (d) 900 volts

Last Answer : c) 9000 volts

Tick the wrong statement. a) Velocity of light is independent of the motion of the observer. b) Velocity of light in free space is the same in all directions. c) Velocity of light in free space is different in different directions. d) Absolute motion or absolute rest is meaningless to talk about

Description : Tick the wrong statement. a) Velocity of light is independent of the motion of the observer. b) Velocity of light in free space is the same in all directions. c) Velocity of light in free space is different in different directions. d) Absolute motion or absolute rest is meaningless to talk about

Last Answer : c) Velocity of light in free space is different in different directions

Describe with neat diagram, how temperature is measured by Gas filled thermometer.

Description : Describe with neat diagram, how temperature is measured by Gas filled thermometer.

Last Answer : Explanation:- If volume of a gas is maintained at constant and If a certain volume of inert gas is enclosed in a bulb, capillary and bourdon tube, the most of the gas in the bulb, then the ...   Name of the gases used in Gas filled thermometers.  1. Nitrogen 2. Helium 3. Inert Gas 

One ofthe followingis not a reason forthe use of anantenna coupler: a. To make the antenna look resistive b. To provide the output amplifier with the correct load impedance c. To discriminate against harmonics d. To prevent reradiation of the local oscillator

Description : One ofthe followingis not a reason forthe use of anantenna coupler: a. To make the antenna look resistive b. To provide the output amplifier with the correct load impedance c. To discriminate against harmonics d. To prevent reradiation of the local oscillator

Last Answer : d. To prevent reradiation of the local oscillator

The output from a full wave rectifier is (a) A pulsating uni-directional current (b) A DC voltage (c) Zero (d) An AC voltage

Description : The output from a full wave rectifier is (a) A pulsating uni-directional current (b) A DC voltage (c) Zero (d) An AC voltage

Last Answer : a) A pulsating uni-directional current

The output waveform produced due to time base generator in a CRO is a) saw tooth b) sinusoidal c) linear d) helical

Description : The output waveform produced due to time base generator in a CRO is a) saw tooth b) sinusoidal c) linear d) helical

Last Answer : a) saw tooth

For design of sewers, percentage of sewage discharge is assumed A. 65 to 70% B. 70 to 75% C. 75 to 80% D. 85%

Description : For design of sewers, percentage of sewage discharge is assumed A. 65 to 70% B. 70 to 75% C. 75 to 80% D. 85%

Last Answer : ANS: C

Resorce requirement in project becomes constant while the project is in its _____ progress stage. (A) 40 to 55% (B) 55 to 70% (C) 70 to 80% (D) 80 to 95%

Description : Resorce requirement in project becomes constant while the project is in its _____ progress stage. (A) 40 to 55% (B) 55 to 70% (C) 70 to 80% (D) 80 to 95%

Last Answer : (D) 80 to 95%

Resorce requirement in project becomes constant while the project is in its progress stage. (A) 40 to 55% (B) 55 to 70% (C) 70 to 80% (D) 80 to 95%

Description : Resorce requirement in project becomes constant while the  project is in its progress stage. (A) 40 to 55% (B) 55 to 70% (C) 70 to 80% (D) 80 to 95%

Last Answer : (D) 80 to 95%

Resource requirement in project becomes constant while the project is in its progress stage. A. 40 to 55% B. 55 to 70% C. 70 to 80% D. 80 to 95%

Description : Resource requirement in project becomes constant while the project is in its progress stage. A. 40 to 55% B. 55 to 70% C. 70 to 80% D. 80 to 95%

Last Answer : D. 80 to 95%

The average humidity percentage recommended for interior plants is: a. 70 to 100% b. 40 to 70% c. 20 to 30% d. 10 to 20%86.

Description : The average humidity percentage recommended for interior plants is: a. 70 to 100% b. 40 to 70% c. 20 to 30% d. 10 to 20%86.

Last Answer : 40 to 70%

Seed germination percentage of rough lemon is: a. 50-60% b. 60-70% c. 70-80% d. 80-90%

Description : Seed germination percentage of rough lemon is: a. 50-60% b. 60-70% c. 70-80% d. 80-90%

Last Answer : 60-70%

Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Description : Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Last Answer : (B) 60-70

The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%

Description : The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%

Last Answer : (c) 70 to 80%

Juice extraction capacity of vertical three roller type bullock down sugercane crusher E. 50-70% F. 70-90% G. 90-100% H. 30-50%

Description : Juice extraction capacity of vertical three roller type bullock down sugercane crusher E. 50-70% F. 70-90% G. 90-100% H. 30-50%

Last Answer : E. 50-70%

Which type of optical splitter (Y-coupler or T-coupler) splits only a small amount of power from the input fiber to one of the output fibers?

Description : Which type of optical splitter (Y-coupler or T-coupler) splits only a small amount of power from the input fiber to one of the output fibers?

Last Answer : T-coupler

Characteristics impedance of a transmission line is the impedance measured at the ___________ when its length is infinite. A. input B. shorted end of the line C. output D. midsection

Description : Characteristics impedance of a transmission line is the impedance measured at the ___________ when its length is infinite. A. input B. shorted end of the line C. output D. midsection

Last Answer : A. input

Material price, mix, usage and revised quantity variances are measured on _______ basis, whereas material yield variance is measured on _______ basis. A. Output, Input B. Output, Output C. Input, Output D. None of the above

Description : Material price, mix, usage and revised quantity variances are measured on _______ basis, whereas material yield variance is measured on _______ basis. A. Output, Input B. Output, Output C. Input, Output D. None of the above

Last Answer : C. Input, Output