Anyone with soldering experience: Can you help me fix my thumb drive?

Anyone with soldering experience: Can you help me fix my thumb drive?
by

1 Answer

Answer :

Sounds like the wires are soldered onto the wrong pins and if ya don’t think any wires or leads are touching you better check it all over so that you do know that they are none touching…
by

Related questions

Need help logging in to backtrack 4 from a thumb drive?

Description : Need help logging in to backtrack 4 from a thumb drive?

Last Answer : You should be able to type startx to start the X server. That should bring you to a desktop, if you have a GUI installed. Be very careful though - the root user can change just about anything on the ... , I'm just making a few assumptions given the question. If startx doesn't work, let us know.

Can anyone help me fix the weird problem with my thumb?

Description : Can anyone help me fix the weird problem with my thumb?

Last Answer : It might be some kind of fungal infection if it is not responding to lotion. Have you seen a dermatologist?

The Phalanx bone on my thumb appears as it is pushed forward more than it should be, is there any way to fix it?

Description : The Phalanx bone on my thumb appears as it is pushed forward more than it should be, is there any way to fix it?

Last Answer : What kind of doctor did you go to? You need to go to an othopedic surgeon with all this information.

Why is the metal end of a thumb drive hot to the touch after copying files to it?

Description : Why is the metal end of a thumb drive hot to the touch after copying files to it?

Last Answer : Here’s the link that tells you why and a word of caution if it’s getting too hot because of defective ports.

Why don't thumb drive makers compensate for formatting?

Description : Why don't thumb drive makers compensate for formatting?

Last Answer : answer:They do; look for asterisks and fine print. Some of them simply say that the advertised capacity is without formatting, but some also give the formatted capacity. As for why they don't add the ... make the raw drive an easy-to-address size and then put in fine print formatted capacity is

How can I boot from a thumb drive on the IBM ThinkPad a22m?

Description : How can I boot from a thumb drive on the IBM ThinkPad a22m?

Last Answer : you can boot from one or the other. I think bootable usb is easier for many reasons, but the bios has to support it. Google how to create a bootable USB and you will find out how to make one

My VISTA laptop does not recognize my thumb drive.

Description : My VISTA laptop does not recognize my thumb drive.

Last Answer : You need to have the drive’s “driver” software on your Vista. Try downloading it from the thumb drive manufacturer’s web site.

How do I boot from an external USB drive (not a thumb drive)?

Description : How do I boot from an external USB drive (not a thumb drive)?

Last Answer : You’ll need to go into your BIOS and tell it which drive to boot from.

What is the procedure to use a thumb drive as extra RAM in Windows Vista?

Description : What is the procedure to use a thumb drive as extra RAM in Windows Vista?

Last Answer : I don’t know to much about this but my boss does it and he says it works great I think you need a thumb drive that has boost capabilities. Not every thumb drive works. Does anyone know if you can do this with a mac as well?

I have a usb thumb drive that I think has some spyware and viruses on it how do I delete all the files or format it without infecting my pc?

Description : I have a usb thumb drive that I think has some spyware and viruses on it how do I delete all the files or format it without infecting my pc?

Last Answer : well, you could smash it with a hammer, a rather crude way, but effective, otherwise you could take the risk, plug it in and reformat it, why do you think it has multiple spyware and virus files on it, and are they mount activated ?

Pen drive is also known as (a) Flash drive (b) Data stick (c) Thumb drive (d) All of the above -Technology

Description : Pen drive is also known as (a) Flash drive (b) Data stick (c) Thumb drive (d) All of the above -Technology

Last Answer : (d) A USB flash drive, data stick, thumb drive or pen drive is a portable drive that connects to a computer’s USB port.

How many songs 1 GB USB thumb drive hold?

Description : How many songs 1 GB USB thumb drive hold?

Last Answer : Need answer

How much data can a thumb drive hold?

Description : How much data can a thumb drive hold?

Last Answer : These drives have a wide variety of storage space. They can be found under 1 gigabyte and can go as high as 32 gigabytes. Typically, 8 and 16 gig drives are the most popular.

Does anyone know how to fix a broken external hard drive?

Description : Does anyone know how to fix a broken external hard drive?

Last Answer : (Do not attempt while using psychedelic mushrooms.)

What's the best way to fix a mini-usb port on an external hard drive enclosure?

Description : What's the best way to fix a mini-usb port on an external hard drive enclosure?

Last Answer : I do have a spare WD hardrive enclosure that may be the same physical size, but I can’t figure out how to open it as it has no visible screws.

How to fix F drive not accessible error?

Description : How to fix F drive not accessible error?

Last Answer : Reboot, for starters.

How can I fix my (DVD RW) Optical Drive?

Description : How can I fix my (DVD RW) Optical Drive?

Last Answer : Have you got any drive emulation software – for example, Daemon Tools or PowerISO – installed?

How do I fix my hard drive?

Description : How do I fix my hard drive?

Last Answer : answer:Something probably disconnected. Take it apart, check things out and put it back together. Side Note: This does NOT work with people, don’t try this, the cops don’t like it.

My PC thinks portable hdd is a cd-rom drive, how can I fix this?

Description : My PC thinks portable hdd is a cd-rom drive, how can I fix this?

Last Answer : Change your device driver. If your enclosure came with a disc, use it to install the driver. If not, Google a driver for the enclosure.

How do I fix my DVD/CD drive in my laptop? Read for more details?

Description : How do I fix my DVD/CD drive in my laptop? Read for more details?

Last Answer : Has it ever worked? In what program do you receive the information that the disk is blank?

Does building a guitar involve any soldering?

Description : Does building a guitar involve any soldering?

Last Answer : Depends on the guitar. Acoustic, no. Electric, yes.

What is soldering ?

Description : What is soldering ?

Last Answer : : After mechanical connection between the wire and the cable conductor, the joint is strengthened by solder and resin to strengthen the joint, increase the durability of the joint and the current barrier is called alloy or soldering.

What is soldering ?

Description : What is soldering ?

Last Answer : Soldering is the process by which two or more metals are joined together.

Why is soldering done ?

Description : Why is soldering done ?

Last Answer : Soldering is done to increase the strength and durability of electrical wiring joints and to ensure uninterrupted wiring and protection from corrosive processes due to unforeseen nature.

What is the ratio of soldering tin lead ?

Description : What is the ratio of soldering tin lead ?

Last Answer : The ratio of lead to tin is 40 ঃ 60.

What is soldering ?

Description : What is soldering ?

Last Answer : : Soldering is a special process by which two or more metallic components are joined together to form a connection and a filler metal element is used as an auxiliary for this purpose which is formed by flow at the junction in molten state.

looking for: soldering irons Prague

Description : Hello, I'm looking for someone who can solder, I need to solder up to 3.5 mm Jack cable, thank you

Last Answer : Almost anyone can do it, if possible. or anyone doing something in electronics

What is the type of solder that would be used in hard soldering?

Description : What is the type of solder that would be used in hard soldering?

Last Answer : Need answer

Why do you think it is best for a soldering iron to have a soldering stand?

Description : Why do you think it is best for a soldering iron to have a soldering stand?

Last Answer : Have you ever had a soldering iron roll off the table and landon your wrist, burning a hole that took over a month to heal? I didin 5th grade while building one of the Radio Shack electronics kitsI had ... stand!!! I was nevergoing to run the risk of a soldering iron getting away from meagain!!!!!

Why do you think it is best for a soldering iron to have a soldering stand?

Description : Why do you think it is best for a soldering iron to have a soldering stand?

Last Answer : Have you ever had a soldering iron roll off the table and landon your wrist, burning a hole that took over a month to heal? I didin 5th grade while building one of the Radio Shack electronics kitsI had ... stand!!! I was nevergoing to run the risk of a soldering iron getting away from meagain!!!!!

Acid soldering flux poisoning?

Description : Acid soldering flux poisoning?

Last Answer : DefinitionAcid soldering flux is a chemical used to clean and protect the area (joint) where two pieces of metal come together. Flux poisoning occurs when someone swallows this substance.This is for information only ... Network.Also reviewed by David Zieve, MD, MHA, Medical Director, A.D.A.M., Inc.

Where can I go to get some information on soldering iron?

Description : Where can I go to get some information on soldering iron?

Last Answer : When you use a soldering iron you would be soldering some kind of metal frame or something because soldering irons are irrelevant to soldering iron. Sorry, not applicable.

What is soldering iron and how do you use it?

Description : What is soldering iron and how do you use it?

Last Answer : Soldering iron is used in heating the metal for soldering. If you want to learn more about soldering iron visit en.wikipedia.org/wiki/Soldering_iron.

Soldering Station?

Description : Soldering Station?

Last Answer : The key to getting a good soldering station is first knowing what purpose you are going to be using it for. After that, make sure the one you choose is sturdy enough, and has enough room for what you are doing. Avoid cheaply made stations as they are prone to defects.

Soldering of two metals is possible because of the property of – (1) Viscosity (2) Osmosis (3) Cohesion (4) Surface tension

Description : Soldering of two metals is possible because of the property of – (1) Viscosity (2) Osmosis (3) Cohesion (4) Surface tension

Last Answer : (3) Cohesion Explanation: Soldering is the process of joining two metals by the use of a solder alloy, and it is one of the oldest known joining techniques. It is possible because of the ... through-out the interior of substance. Soldering leads to alloy formation at the layer between two metals.

Which type of flux should be used when soldering electrical wire connections and electronic components? A. Silver flux B. Rosin flux C. Solid flux D. Acid flux

Description : Which type of flux should be used when soldering electrical wire connections and electronic components? A. Silver flux B. Rosin flux C. Solid flux D. Acid flux

Last Answer : Answer: B

When troubleshooting an electronic circuit, a cold solder joint can be located with the aid of an ohmmeter. Once the problem has been located, you should _________________. A. reheat the circuit in an oven to an even temperature and recheck with an ohmmeter B. reheat the connection with a match and recheck with an ohmmeter C. reheat connection with a soldering tool and recheck with an ohmmeter D. do nothing as this is the normal condition

Description : When troubleshooting an electronic circuit, a cold solder joint can be located with the aid of an ohmmeter. Once the problem has been located, you should _________________. A. reheat the circuit in an ... a soldering tool and recheck with an ohmmeter D. do nothing as this is the normal condition

Last Answer : Answer: C

When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Description : When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Last Answer : Answer: B

Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded to the board may come loosened from the board. C. The circuit board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Description : Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded ... board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Last Answer : Answer: B

If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at a time B. using a thermal shunt C. pre-oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Description : If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at ... oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Last Answer : Answer: B

Which of the procedures listed could result in damaging a transistor beyond repair? A. Applying incorrect polarity to the collector circuit. B. Applying excessive voltage to the input circuit. C. Careless soldering which would overheat the transistor. D. All of the above.

Description : Which of the procedures listed could result in damaging a transistor beyond repair? A. Applying incorrect polarity to the collector circuit. B. Applying excessive voltage to the input circuit. C. Careless soldering which would overheat the transistor. D. All of the above.

Last Answer : Answer: D

The proper way to apply plastic electrical tape to an electric cable splice is to _____________. A. apply tape to the braided cover, but avoid touching it B. wind the tape so that each turn overlaps the turn before it C. apply the tape in one non-overlapping layer only D. heat the tape with a soldering iron for good bonding

Description : The proper way to apply plastic electrical tape to an electric cable splice is to _____________. A. apply tape to the braided cover, but avoid touching it B. wind the tape so that each turn overlaps ... tape in one non-overlapping layer only D. heat the tape with a soldering iron for good bonding

Last Answer : Answer: B

Soldering of two metals is possible due to the property–

Description : Soldering of two metals is possible due to the property–

Last Answer : Cohesion

What is soldering and what is brazing?

Description : What is soldering and what is brazing?

Last Answer : Soldering is the process of joining two metals with an alloy whose melting point is less that of the materials to be soldered. Soldering at high temperature using brass as solder is called brazing or hard ... soft solder) is tin 60% and lead 40%. Its melting point is 190°C and is widely used.  

Glass pipes can be joined by (A) Flanges (B) Welding (C) Soldering (D) Bell and spigot joint

Description : Glass pipes can be joined by (A) Flanges (B) Welding (C) Soldering (D) Bell and spigot joint

Last Answer : (D) Bell and spigot joint

Temperature attained in soldering of metals is about __________ °C. (A) 150-300 (B) 400-500 (C) 650-800 (D) 1000-1100

Description : Temperature attained in soldering of metals is about __________ °C. (A) 150-300 (B) 400-500 (C) 650-800 (D) 1000-1100

Last Answer : (A) 150-300

Out of the following, the joint produced by __________ has the lowest strength. (A) Soldering (B) Welding (C) Brazing (D) Riveting

Description : Out of the following, the joint produced by __________ has the lowest strength. (A) Soldering (B) Welding (C) Brazing (D) Riveting

Last Answer : (A) Soldering

Use of flux during soldering is done to (A) Increase fluidity of solder by lowering its melting temperature (B) Prevent oxide formation (C) Wash away surplus solder (D) Full up the joint gap

Description : Use of flux during soldering is done to (A) Increase fluidity of solder by lowering its melting temperature (B) Prevent oxide formation (C) Wash away surplus solder (D) Full up the joint gap

Last Answer : (B) Prevent oxide formation

The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Description : The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Last Answer : Option C

. Lap joints are preferred over butt joints in soldering/brazing, because these joints are (A) Weaker in tension but stronger in shear (B) Weaker in shear but stronger in tension (C) Stronger in both shear and tension (D) The lap joints are easily made

Description : . Lap joints are preferred over butt joints in soldering/brazing, because these joints are (A) Weaker in tension but stronger in shear (B) Weaker in shear but stronger in tension (C) Stronger in both shear and tension (D) The lap joints are easily made

Last Answer : r: Option D