R&D completion time depends on a. number of projects in R&D. b. automation rating. c. similarity to existing products. d. size of the product. e. a, b, and c.

R&D completion time depends on
a. number of projects in R&D.
b. automation rating.
c. similarity to existing products.
d. size of the product.
e. a, b, and c.
by

1 Answer

Answer :

e. a, b, and c.
by

Related questions

What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway at the same time. d. The proximity of the product's new location to an existing product in your company's line. e. The labor strike.

Description : What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway ... of the product's new location to an existing product in your company's line. e. The labor strike.

Last Answer : The labor strike.

R&D completion time can be diminished a. by repositioning a product. b. the more a company changes a product’s MTBF. c. when several products are put into R&D at the same time. d. when a company takes advantage of existing technology. e. none of the above.

Description : R&D completion time can be diminished a. by repositioning a product. b. the more a company changes a product’s MTBF. c. when several products are put into R&D at the same time. d. when a company takes advantage of existing technology. e. none of the above.

Last Answer : d. when a company takes advantage of existing technology.

What is most likely to happen on introduction of a new product, if you do not buy the production line, in the year prior to the product’s introduction? a. You cannot manufacture your new product. b. If the product is moved close to existing products on the R&D spreadsheet, a few but insufficient number of the new product would be produced. c. The product would automatically cease to exist. d. The new product would stock out and there would be a loss in sales revenue. e. None of the above.

Description : What is most likely to happen on introduction of a new product, if you do not buy the production line, in the year prior to the product's introduction? a. You cannot manufacture your new product. b. ... new product would stock out and there would be a loss in sales revenue. e. None of the above.

Last Answer : a. You cannot manufacture your new product.

R&D projects can drive a product’s: a. size. b. age. c. reliability. d. performance. e. all of the above.

Description : R&D projects can drive a product’s: a. size. b. age. c. reliability. d. performance. e. all of the above.

Last Answer : e. all of the above.

If a product’s Automation rating is substantially increased, it will: a. take longer to move the product across the Perceptual Map. b. take a shorter time to move the product across the Perceptual Map. c. not allow the product to move across the Perceptual Map. d. have no effect on the product moving across the Perceptual Map. e. other.

Description : If a product's Automation rating is substantially increased, it will: a. take longer to move the product across the Perceptual Map. b. take a shorter time to move the product across the Perceptual Map. ... Perceptual Map. d. have no effect on the product moving across the Perceptual Map. e. other.

Last Answer : a. take longer to move the product across the Perceptual Map.

When an R&D effort started in 2001 completes on September 15, 2002, the product revision kicks in a. October 1, 2002. b. immediately upon completion. c. January 1, 2003. d. R&D has no effect on product revisions. e. September 15, 2003.

Description : When an R&D effort started in 2001 completes on September 15, 2002, the product revision kicks in a. October 1, 2002. b. immediately upon completion. c. January 1, 2003. d. R&D has no effect on product revisions. e. September 15, 2003.

Last Answer : b. immediately upon completion.

How can the R&D cycle time be reduced? a. Increasing automation levels b. Budgeting money to quality initiatives c. Increasing R&D budget d. Decreasing product portfolio e. Decreasing capacity

Description : How can the R&D cycle time be reduced? a. Increasing automation levels b. Budgeting money to quality initiatives c. Increasing R&D budget d. Decreasing product portfolio e. Decreasing capacity

Last Answer : b. Budgeting money to quality initiatives

Repositioning moves a product on the Perceptual Map from its old location to a new one. When does the new location become active? a. The day the R&D project completes b. The following year the R&D project completes c. The month the R&D project completes d. The day capacity and automation is purchased e. The day capacity is purchased

Description : Repositioning moves a product on the Perceptual Map from its old location to a new one. When does the new location become active? a. The day the R&D project completes b. The following year ... R&D project completes d. The day capacity and automation is purchased e. The day capacity is purchased

Last Answer : a. The day the R&D project completes

Using the R&D Spreadsheet to design your products, you have which of the following projects to choose from? a. Repositioning b. Invention c. Reliability adjustment d. All of the above e. None of the above

Description : Using the R&D Spreadsheet to design your products, you have which of the following projects to choose from? a. Repositioning b. Invention c. Reliability adjustment d. All of the above e. None of the above

Last Answer : d. All of the above

Which Automation rating requires the longest time to reposition a product? a. 1 b. 3 c. 7 d. 9 e. 10

Description : Which Automation rating requires the longest time to reposition a product? a. 1 b. 3 c. 7 d. 9 e. 10

Last Answer : e. 10

If you reduce automation in the production component of Marketing, you will: a. slow down R&D designs. b. incur a retooling cost. c. lose the game. d. none of the above.

Description : If you reduce automation in the production component of Marketing, you will: a. slow down R&D designs. b. incur a retooling cost. c. lose the game. d. none of the above.

Last Answer : b. incur a retooling cost.

Rapid movement of an existing product on the Perceptual Map requires a. reliability adjustment. b. low automation levels. c. high automation levels. d. none of the above.

Description : Rapid movement of an existing product on the Perceptual Map requires a. reliability adjustment. b. low automation levels. c. high automation levels. d. none of the above.

Last Answer : b. low automation levels.

.A functional manager is responsible for a. one of the five market segments. b. R&D, Marketing, Production, Finance, Human Resources, and TQM/PI. c. one of the five products in the starting product line. d. none of these. e. monitoring competitors in their entirety.

Description : .A functional manager is responsible for a. one of the five market segments. b. R&D, Marketing, Production, Finance, Human Resources, and TQM/PI. c. one of the five products in the starting product line. d. none of these. e. monitoring competitors in their entirety.

Last Answer : b. R&D, Marketing, Production, Finance, Human Resources, and TQM/PI.

Your ___________ department controls the performance and size, therefore position of your sensor products within the market. a. Planning b. Finance c. R&D d. Marketing

Description : Your ___________ department controls the performance and size, therefore position of your sensor products within the market. a. Planning b. Finance c. R&D d. Marketing

Last Answer : c. R&D

A new unit of capacity costs $6 for the floor space plus $4 times a. hourly wage. b. automation rating. c. unit cost. d. MTBF. e. $0.65.

Description : A new unit of capacity costs $6 for the floor space plus $4 times a. hourly wage. b. automation rating. c. unit cost. d. MTBF. e. $0.65.

Last Answer : b. automation rating.

If you want to add 500,000 units of capacity to an assembly line with an automation rating of 5, how much will it cost? a. 1,200,000 b. 1,300,000 c. 13,000,000 d. 24,000,000 e. 26,000,000

Description : If you want to add 500,000 units of capacity to an assembly line with an automation rating of 5, how much will it cost? a. 1,200,000 b. 1,300,000 c. 13,000,000 d. 24,000,000 e. 26,000,000

Last Answer : c. 13,000,000

The relative cost of a product’s material cost increases as: a. size is increased. b. performance is decreased. c. MTBF is raised. d. automation stays the same. e. all of the above.

Description : The relative cost of a product’s material cost increases as: a. size is increased. b. performance is decreased. c. MTBF is raised. d. automation stays the same. e. all of the above.

Last Answer : c. MTBF is raised.

In the Capstone® simulation, what are the components of a product’s material cost? a. Cost of Inventory on hand and the cost to store it b. Reliability component cost and positioning component cost c. The costs associated with inventory, shipping and handling d. Level of automation and product reliability e. None of the above

Description : In the Capstone® simulation, what are the components of a product's material cost? a. Cost of Inventory on hand and the cost to store it b. Reliability component cost and positioning component ... , shipping and handling d. Level of automation and product reliability e. None of the above

Last Answer : b. Reliability component cost and positioning component cost

These TQM initiatives reduce administrative overhead; reduces the R&D cycle time and enhances the effectiveness of the promotion and sales budget. a. Concurrent Engineering (CCE); Channel Support systems and Just-in-Time Inventory b. Quality Function Deployment and Benchmarking c. Continuous Product Improvement systems (CPI) and Just-in-Time Inventory d. Channel Support systems and Six Sigma e. Quality Initiative Training (QIT)

Description : These TQM initiatives reduce administrative overhead; reduces the R&D cycle time and enhances the effectiveness of the promotion and sales budget. a. Concurrent Engineering (CCE); Channel Support systems ... Inventory d. Channel Support systems and Six Sigma e. Quality Initiative Training (QIT)

Last Answer : b. Quality Function Deployment and Benchmarking

This process management initiative reduces R&D cycle time, a. Concurrent Engineering (CCE) b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Description : This process management initiative reduces R&D cycle time, a. Concurrent Engineering (CCE) b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Last Answer : a. Concurrent Engineering (CCE)

A point or some points you consider for your strategy are a. strive to give your customers the top two buying criteria. b. the perceptual map is more important as a rough cut consideration than a fine cut distinction. c. maximize the effectiveness of R&D, to achieve higher demand you must have a substantially better offer, it does not matter how good your product is if you stock out. d. all of the above.

Description : A point or some points you consider for your strategy are a. strive to give your customers the top two buying criteria. b. the perceptual map is more important as a rough cut consideration than a fine cut ... , it does not matter how good your product is if you stock out. d. all of the above.

Last Answer : d. all of the above.

What is one drawback of increasing automation? a. The product requires increased time/expense for subsequent short-move repositioning. b. Operating second shift becomes more expensive. c. Automation causes large leaps in repositioning. d. Automation slows production capability. e. It requires more employees for the production line.

Description : What is one drawback of increasing automation? a. The product requires increased time/expense for subsequent short-move repositioning. b. Operating second shift becomes more expensive. c. ... d. Automation slows production capability. e. It requires more employees for the production line.

Last Answer : a. The product requires increased time/expense for subsequent short-move repositioning.

If your team decides to introduce a new product, when should capacity and automation be purchased? a. Two rounds prior to product release b. One round prior to product release c. The round of product release d. The round after product release e. Purchase of capacity and automation is not necessary for new product release

Description : If your team decides to introduce a new product, when should capacity and automation be purchased? a. Two rounds prior to product release b. One round prior to product release c. The ... round after product release e. Purchase of capacity and automation is not necessary for new product release

Last Answer : b. One round prior to product release

.Finance Decisions should be made a. before the other departments enter their decisions. b. at any time. c. after the other departments have entered their decisions. d. after the R&D department has entered its decisions. e. none of the above.

Description : .Finance Decisions should be made a. before the other departments enter their decisions. b. at any time. c. after the other departments have entered their decisions. d. after the R&D department has entered its decisions. e. none of the above.

Last Answer : c. after the other departments have entered their decisions.

Investing in Channel Support Systems can a. increase demand. b. reduce R&D cycle time. c. reduce material costs. d. reduce labor costs. e. reduce administrative costs.

Description : Investing in Channel Support Systems can a. increase demand. b. reduce R&D cycle time. c. reduce material costs. d. reduce labor costs. e. reduce administrative costs.

Last Answer : a. increase demand.

Investing in Quality Function Deployment Effort can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce R&D cycle time and increase demand. d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets. e. increase demand.

Description : Investing in Quality Function Deployment Effort can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce R&D cycle time and increase demand. d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets. e. increase demand.

Last Answer : d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets.

Investing in Vendor Just In Time can a. reduce material costs and R&D cycle time. b. reduce administrative costs and labor costs. c. reduce R&D cycle time and increase demand. d. reduce material costs and administrative costs. e. reduce material costs and increase demand.

Description : Investing in Vendor Just In Time can a. reduce material costs and R&D cycle time. b. reduce administrative costs and labor costs. c. reduce R&D cycle time and increase demand. d. reduce material costs and administrative costs. e. reduce material costs and increase demand.

Last Answer : d. reduce material costs and administrative costs.

Quality Initiative Training can a. increase demand. b. decrease R&D cycle time. c. decrease material costs. d. decrease labor costs. e. decrease administrative costs.

Description : Quality Initiative Training can a. increase demand. b. decrease R&D cycle time. c. decrease material costs. d. decrease labor costs. e. decrease administrative costs.

Last Answer : d. decrease labor costs.

Within the process management initiatives, concurrent engineering a. reduces material cost, inventors’ carrying costs and administrative overhead. b. reduces labor costs. c. increases the effectiveness of the sales budget and therefore demand. d. reduces R&D cycle time. e. none of the above.

Description : Within the process management initiatives, concurrent engineering a. reduces material cost, inventors’ carrying costs and administrative overhead. b. reduces labor costs. c. increases the effectiveness of the sales budget and therefore demand. d. reduces R&D cycle time. e. none of the above.

Last Answer : d. reduces R&D cycle time.

Within the Process Management Initiatives, channel support systems a. reduce material cost. b. reduce labor costs. c. increase demand. d. reduce R&D cycle time. e. none of the above.

Description : Within the Process Management Initiatives, channel support systems a. reduce material cost. b. reduce labor costs. c. increase demand. d. reduce R&D cycle time. e. none of the above.

Last Answer : c. increase demand.

Budgeting money to Quality initiative will lead to these outcomes except: a. decrease R&D time. b. increase Demand. c. increase Labor Costs. d. increase efficiency. e. produce administrative savings.

Description : Budgeting money to Quality initiative will lead to these outcomes except: a. decrease R&D time. b. increase Demand. c. increase Labor Costs. d. increase efficiency. e. produce administrative savings.

Last Answer : c. increase Labor Costs.

Which statement is true? a. Increasing in capacity and changes in automation can take less than a year to implement if the product already exists. Sales of capacity take a full year to implement. b. Increases in capacity and changes in automation take a full year to implement. Sales of capacity are immediate. c. Increases in capacity, changes in automation and sales of capacity take a full year to implement. d. Increases in capacity, changes in automation and sales of capacity take less than a year to implement if the product already exists.

Description : Which statement is true? a. Increasing in capacity and changes in automation can take less than a year to implement if the product already exists. Sales of capacity take a full year to implement ... automation and sales of capacity take less than a year to implement if the product already exists.

Last Answer : b. Increases in capacity and changes in automation take a full year to implement. Sales of capacity are immediate.

Higher automation leads to lower production costs and has what effect on repositioning a product on the perceptual map? a. makes it more difficult and expensive b. makes it easier and cheaper c. no effect d. eliminates repositioning

Description : Higher automation leads to lower production costs and has what effect on repositioning a product on the perceptual map? a. makes it more difficult and expensive b. makes it easier and cheaper c. no effect d. eliminates repositioning

Last Answer : a. makes it more difficult and expensive

A 6 month project in R&D costs____________; while a 12 month project in R&D costs ________. a. 1,000,000; 1,500,000 b. 650,000; 850,000 c. 500,000; 1,000,000 d. 750,000; 1,000,000 e. 1,000,000; 750,000

Description : A 6 month project in R&D costs____________; while a 12 month project in R&D costs ________. a. 1,000,000; 1,500,000 b. 650,000; 850,000 c. 500,000; 1,000,000 d. 750,000; 1,000,000 e. 1,000,000; 750,000

Last Answer : c. 500,000; 1,000,000

Which one is not an area in which Capstone® separates company activities? a. Marketing b. Production c. R&D d. Logistics e. TQM

Description : Which one is not an area in which Capstone® separates company activities? a. Marketing b. Production c. R&D d. Logistics e. TQM

Last Answer : d. Logistics

Investing in Concurrent Engineering can a. reduce R&D cycle time. b. reduce labor and administrative costs. c. increase demand and reduce labor costs d. reduce R&D cycle time and increase demand.

Description : Investing in Concurrent Engineering can a. reduce R&D cycle time. b. reduce labor and administrative costs. c. increase demand and reduce labor costs d. reduce R&D cycle time and increase demand.

Last Answer : a. reduce R&D cycle time.

Investing in CPI can a. reduce administrative costs. b. reduce material and administrative costs. c. reduce material costs. d. reduce labor costs and reduce R&D cycle time.

Description : Investing in CPI can a. reduce administrative costs. b. reduce material and administrative costs. c. reduce material costs. d. reduce labor costs and reduce R&D cycle time.

Last Answer : c. reduce material costs.

The reliability component cost of a product with a 17,000 hour MTBF rating is: a. $5.10. b. $17.00. c. $51.00. d. $170. e. cost cannot be determined with information given.

Description : The reliability component cost of a product with a 17,000 hour MTBF rating is: a. $5.10. b. $17.00. c. $51.00. d. $170. e. cost cannot be determined with information given.

Last Answer : a. $5.10.

Period costs include a. R&D. b. promotion. c. sales and administration expenses. d. all of the above.

Description : Period costs include a. R&D. b. promotion. c. sales and administration expenses. d. all of the above.

Last Answer : d. all of the above.

R&D project length can be as long as ___________. a. 3 months b. 2 years c. 1 year d. 3 years

Description : R&D project length can be as long as ___________. a. 3 months b. 2 years c. 1 year d. 3 years

Last Answer : d. 3 years

Which is false about production in Capsim? a. Teams cannot produce beyond 100% capacity. b. Teams should match their production schedule to the teams sales forecast. c. There is a one year lag between purchase and use of additional production capacity. d. There is a one year lag between purchase and use of additional production automation. e. All of the above are true.

Description : Which is false about production in Capsim? a. Teams cannot produce beyond 100% capacity. b. Teams should match their production schedule to the teams sales forecast. c. There is a one year lag ... year lag between purchase and use of additional production automation. e. All of the above are true.

Last Answer : a. Teams cannot produce beyond 100% capacity.

As a general rule, stock issues are used to: a. Protect you from getting a loan from Big Al. b. Fund the purchase of more market share. c. Fund long term investments in capacity and automation. d. Fund yearly sales and promotional budgets. e. All of the above.

Description : As a general rule, stock issues are used to: a. Protect you from getting a loan from Big Al. b. Fund the purchase of more market share. c. Fund long term investments in capacity and automation. d. Fund yearly sales and promotional budgets. e. All of the above.

Last Answer : c. Fund long term investments in capacity and automation.

Lowering the automation level will result in a. receiving a cash payment of $4 per unit of capacity. b. a tax credit. c. a charge. d. immediate changes to production lines. e. none of the above.

Description : Lowering the automation level will result in a. receiving a cash payment of $4 per unit of capacity. b. a tax credit. c. a charge. d. immediate changes to production lines. e. none of the above.

Last Answer : c. a charge.

At the start of the simulation, all assembly lines have an automation level between: a. 2.0 and 4.0. b. 3.0 and 5.0. c. 4.0 and 6.0. d. 5.0 and 7.0. e. 6.0 and 8.0.

Description : At the start of the simulation, all assembly lines have an automation level between: a. 2.0 and 4.0. b. 3.0 and 5.0. c. 4.0 and 6.0. d. 5.0 and 7.0. e. 6.0 and 8.0.

Last Answer : b. 3.0 and 5.0.

The cost to increase automation to 8.0 is equal to a. First Shift Capacity X [$8 X (4 – Automation Level). b. First Shift Capacity X [$8 X (4 + Automation Level). c. First Shift Capacity X [$4 X (8 – Automation Level). d. First Shift Capacity X [$4 X (8 + Automation Level). e. First Shift Capacity X [$4 X (4 – Automation Level)

Description : The cost to increase automation to 8.0 is equal to a. First Shift Capacity X [$8 X (4 - Automation Level). b. First Shift Capacity X [$8 X (4 + Automation Level). c. First Shift Capacity X [$4 X ... Capacity X [$4 X (8 + Automation Level). e. First Shift Capacity X [$4 X (4 - Automation Level)

Last Answer : c. First Shift Capacity X [$4 X (8 – Automation Level).

Automation levels are given on a scale of _____ to _____. a. 0.0; 5.0 b. 1.0; 5.0 c. 0.0; 10.0 d. 1.0; 10.0 e. 5.0; 10.0

Description : Automation levels are given on a scale of _____ to _____. a. 0.0; 5.0 b. 1.0; 5.0 c. 0.0; 10.0 d. 1.0; 10.0 e. 5.0; 10.0

Last Answer : d. 1.0; 10.0

When purchasing increased Capacity and Automation, the new capacity becomes available a. immediately. b. in 1 year. c. in 6 months. d. in 2 years. e. none of these.

Description : When purchasing increased Capacity and Automation, the new capacity becomes available a. immediately. b. in 1 year. c. in 6 months. d. in 2 years. e. none of these.

Last Answer : b. in 1 year.

Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second shift, and MTBF. d. wage and benefit rates, automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Description : Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second ... , automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Last Answer : d. wage and benefit rates, automation levels, and second shift.

Adding one additional unit of capacity costs a. $4 x Change (difference) in Automation Level b. $6 + ($4 x Current Automation Level). c. $6 x Change (difference) in Automation Level. d. $4 + ($6 x Current Automation Level). e. none of these.

Description : Adding one additional unit of capacity costs a. $4 x Change (difference) in Automation Level b. $6 + ($4 x Current Automation Level). c. $6 x Change (difference) in Automation Level. d. $4 + ($6 x Current Automation Level). e. none of these.

Last Answer : b. $6 + ($4 x Current Automation Level).