What is one drawback of increasing automation? a. The product requires increased time/expense for subsequent short-move repositioning. b. Operating second shift becomes more expensive. c. Automation causes large leaps in repositioning. d. Automation slows production capability. e. It requires more employees for the production line.

What is one drawback of increasing automation?
a. The product requires increased time/expense for subsequent short-move  repositioning.
b. Operating second shift becomes more expensive.
c. Automation causes large leaps in repositioning.
d. Automation slows production capability.
e. It requires more employees for the production line.
by

1 Answer

Answer :

a. The product requires increased time/expense for subsequent short-move  repositioning.
by

Related questions

Higher automation leads to lower production costs and has what effect on repositioning a product on the perceptual map? a. makes it more difficult and expensive b. makes it easier and cheaper c. no effect d. eliminates repositioning

Description : Higher automation leads to lower production costs and has what effect on repositioning a product on the perceptual map? a. makes it more difficult and expensive b. makes it easier and cheaper c. no effect d. eliminates repositioning

Last Answer : a. makes it more difficult and expensive

Repositioning moves a product on the Perceptual Map from its old location to a new one. When does the new location become active? a. The day the R&D project completes b. The following year the R&D project completes c. The month the R&D project completes d. The day capacity and automation is purchased e. The day capacity is purchased

Description : Repositioning moves a product on the Perceptual Map from its old location to a new one. When does the new location become active? a. The day the R&D project completes b. The following year ... R&D project completes d. The day capacity and automation is purchased e. The day capacity is purchased

Last Answer : a. The day the R&D project completes

Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Description : Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Last Answer : e. b, c, d

If a product’s Automation rating is substantially increased, it will: a. take longer to move the product across the Perceptual Map. b. take a shorter time to move the product across the Perceptual Map. c. not allow the product to move across the Perceptual Map. d. have no effect on the product moving across the Perceptual Map. e. other.

Description : If a product's Automation rating is substantially increased, it will: a. take longer to move the product across the Perceptual Map. b. take a shorter time to move the product across the Perceptual Map. ... Perceptual Map. d. have no effect on the product moving across the Perceptual Map. e. other.

Last Answer : a. take longer to move the product across the Perceptual Map.

Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second shift, and MTBF. d. wage and benefit rates, automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Description : Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second ... , automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Last Answer : d. wage and benefit rates, automation levels, and second shift.

When purchasing increased Capacity and Automation, the new capacity becomes available a. immediately. b. in 1 year. c. in 6 months. d. in 2 years. e. none of these.

Description : When purchasing increased Capacity and Automation, the new capacity becomes available a. immediately. b. in 1 year. c. in 6 months. d. in 2 years. e. none of these.

Last Answer : b. in 1 year.

All of the following are direct implications of hiring a second shift except: a. increased production capacity. b. paying higher wages to second shift. c. training costs. d. increased MTBF. e. recruitment costs.

Description : All of the following are direct implications of hiring a second shift except: a. increased production capacity. b. paying higher wages to second shift. c. training costs. d. increased MTBF. e. recruitment costs.

Last Answer : d. increased MTBF.

What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway at the same time. d. The proximity of the product's new location to an existing product in your company's line. e. The labor strike.

Description : What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway ... of the product's new location to an existing product in your company's line. e. The labor strike.

Last Answer : The labor strike.

Which Automation rating requires the longest time to reposition a product? a. 1 b. 3 c. 7 d. 9 e. 10

Description : Which Automation rating requires the longest time to reposition a product? a. 1 b. 3 c. 7 d. 9 e. 10

Last Answer : e. 10

R&D completion time can be diminished a. by repositioning a product. b. the more a company changes a product’s MTBF. c. when several products are put into R&D at the same time. d. when a company takes advantage of existing technology. e. none of the above.

Description : R&D completion time can be diminished a. by repositioning a product. b. the more a company changes a product’s MTBF. c. when several products are put into R&D at the same time. d. when a company takes advantage of existing technology. e. none of the above.

Last Answer : d. when a company takes advantage of existing technology.

How can the R&D cycle time be reduced? a. Increasing automation levels b. Budgeting money to quality initiatives c. Increasing R&D budget d. Decreasing product portfolio e. Decreasing capacity

Description : How can the R&D cycle time be reduced? a. Increasing automation levels b. Budgeting money to quality initiatives c. Increasing R&D budget d. Decreasing product portfolio e. Decreasing capacity

Last Answer : b. Budgeting money to quality initiatives

Rapid movement of an existing product on the Perceptual Map requires a. reliability adjustment. b. low automation levels. c. high automation levels. d. none of the above.

Description : Rapid movement of an existing product on the Perceptual Map requires a. reliability adjustment. b. low automation levels. c. high automation levels. d. none of the above.

Last Answer : b. low automation levels.

Pricing plays a role a. when repositioning a product. b. in the rough cut stage of the purchase decision. c. in neither stage of the purchase decision. d. in the fine cut stage of the purchase decision. e. in both b and d.

Description : Pricing plays a role a. when repositioning a product. b. in the rough cut stage of the purchase decision. c. in neither stage of the purchase decision. d. in the fine cut stage of the purchase decision. e. in both b and d.

Last Answer : e. in both b and d.

Which statement is true? a. Increasing in capacity and changes in automation can take less than a year to implement if the product already exists. Sales of capacity take a full year to implement. b. Increases in capacity and changes in automation take a full year to implement. Sales of capacity are immediate. c. Increases in capacity, changes in automation and sales of capacity take a full year to implement. d. Increases in capacity, changes in automation and sales of capacity take less than a year to implement if the product already exists.

Description : Which statement is true? a. Increasing in capacity and changes in automation can take less than a year to implement if the product already exists. Sales of capacity take a full year to implement ... automation and sales of capacity take less than a year to implement if the product already exists.

Last Answer : b. Increases in capacity and changes in automation take a full year to implement. Sales of capacity are immediate.

The cost to increase automation to 8.0 is equal to a. First Shift Capacity X [$8 X (4 – Automation Level). b. First Shift Capacity X [$8 X (4 + Automation Level). c. First Shift Capacity X [$4 X (8 – Automation Level). d. First Shift Capacity X [$4 X (8 + Automation Level). e. First Shift Capacity X [$4 X (4 – Automation Level)

Description : The cost to increase automation to 8.0 is equal to a. First Shift Capacity X [$8 X (4 - Automation Level). b. First Shift Capacity X [$8 X (4 + Automation Level). c. First Shift Capacity X [$4 X ... Capacity X [$4 X (8 + Automation Level). e. First Shift Capacity X [$4 X (4 - Automation Level)

Last Answer : c. First Shift Capacity X [$4 X (8 – Automation Level).

A production line with 1000 units of capacity has a max production capability of: a. 1000. b. 1500. c. 2500. d. 2000. e. as many as needed.

Description : A production line with 1000 units of capacity has a max production capability of: a. 1000. b. 1500. c. 2500. d. 2000. e. as many as needed.

Last Answer : d. 2000.

If you sell off a production line (capacity and automation), the amount of cash that the company will receive will be a. 65% of the original cost. b. average cost of production for the previous year (market price). c. 50% of the book value. d. 50% of the acquisition cost. e. 65% of the book value.

Description : If you sell off a production line (capacity and automation), the amount of cash that the company will receive will be a. 65% of the original cost. b. average cost of production for the previous year (market ... . 50% of the book value. d. 50% of the acquisition cost. e. 65% of the book value.

Last Answer : a. 65% of the original cost.

What is the total cost in dollars for adding 1.0 million units of capacity to a production line with an automation level of 1.0 and floor space costs per unit of $6? Assume automation costs per unit of $4. a. $26 million b. $10 million c. $2.6 million d. $1 million e. none of the above

Description : What is the total cost in dollars for adding 1.0 million units of capacity to a production line with an automation level of 1.0 and floor space costs per unit of $6? Assume automation costs per unit of $4. a. $26 million b. $10 million c. $2.6 million d. $1 million e. none of the above

Last Answer : b. $10 million

How can assembly lines double their capacity? a. Speed up the production. b. Add a second shift. c. Double the material. d. Build more assembly lines. e. Assembly lines cannot be doubled.

Description : How can assembly lines double their capacity? a. Speed up the production. b. Add a second shift. c. Double the material. d. Build more assembly lines. e. Assembly lines cannot be doubled.

Last Answer : b. Add a second shift.

Using the R&D Spreadsheet to design your products, you have which of the following projects to choose from? a. Repositioning b. Invention c. Reliability adjustment d. All of the above e. None of the above

Description : Using the R&D Spreadsheet to design your products, you have which of the following projects to choose from? a. Repositioning b. Invention c. Reliability adjustment d. All of the above e. None of the above

Last Answer : d. All of the above

The relative cost of a product’s material cost increases as: a. size is increased. b. performance is decreased. c. MTBF is raised. d. automation stays the same. e. all of the above.

Description : The relative cost of a product’s material cost increases as: a. size is increased. b. performance is decreased. c. MTBF is raised. d. automation stays the same. e. all of the above.

Last Answer : c. MTBF is raised.

Which is false about production in Capsim? a. Teams cannot produce beyond 100% capacity. b. Teams should match their production schedule to the teams sales forecast. c. There is a one year lag between purchase and use of additional production capacity. d. There is a one year lag between purchase and use of additional production automation. e. All of the above are true.

Description : Which is false about production in Capsim? a. Teams cannot produce beyond 100% capacity. b. Teams should match their production schedule to the teams sales forecast. c. There is a one year lag ... year lag between purchase and use of additional production automation. e. All of the above are true.

Last Answer : a. Teams cannot produce beyond 100% capacity.

Lowering the automation level will result in a. receiving a cash payment of $4 per unit of capacity. b. a tax credit. c. a charge. d. immediate changes to production lines. e. none of the above.

Description : Lowering the automation level will result in a. receiving a cash payment of $4 per unit of capacity. b. a tax credit. c. a charge. d. immediate changes to production lines. e. none of the above.

Last Answer : c. a charge.

If you purchase production capacity and automation: a. it is available immediately. b. it is available in 6 months. c. it is available in the next year. d. it is available when you need it. e. none of the above.

Description : If you purchase production capacity and automation: a. it is available immediately. b. it is available in 6 months. c. it is available in the next year. d. it is available when you need it. e. none of the above.

Last Answer : c. it is available in the next year.

The automation level a. causes you to require more manpower with higher ratings. b. causes you to require more manpower with lower ratings. c. causes you to require less manpower with higher ratings. d. causes you to require less manpower with lower ratings. e. both b and c.

Description : The automation level a. causes you to require more manpower with higher ratings. b. causes you to require more manpower with lower ratings. c. causes you to require less manpower with higher ratings. d. causes you to require less manpower with lower ratings. e. both b and c.

Last Answer : e. both b and c.

R&D completion time depends on a. number of projects in R&D. b. automation rating. c. similarity to existing products. d. size of the product. e. a, b, and c.

Description : R&D completion time depends on a. number of projects in R&D. b. automation rating. c. similarity to existing products. d. size of the product. e. a, b, and c.

Last Answer : e. a, b, and c.

If you reduce automation in the production component of Marketing, you will: a. slow down R&D designs. b. incur a retooling cost. c. lose the game. d. none of the above.

Description : If you reduce automation in the production component of Marketing, you will: a. slow down R&D designs. b. incur a retooling cost. c. lose the game. d. none of the above.

Last Answer : b. incur a retooling cost.

In the Capstone® simulation, what are the components of a product’s material cost? a. Cost of Inventory on hand and the cost to store it b. Reliability component cost and positioning component cost c. The costs associated with inventory, shipping and handling d. Level of automation and product reliability e. None of the above

Description : In the Capstone® simulation, what are the components of a product's material cost? a. Cost of Inventory on hand and the cost to store it b. Reliability component cost and positioning component ... , shipping and handling d. Level of automation and product reliability e. None of the above

Last Answer : b. Reliability component cost and positioning component cost

If your team decides to introduce a new product, when should capacity and automation be purchased? a. Two rounds prior to product release b. One round prior to product release c. The round of product release d. The round after product release e. Purchase of capacity and automation is not necessary for new product release

Description : If your team decides to introduce a new product, when should capacity and automation be purchased? a. Two rounds prior to product release b. One round prior to product release c. The ... round after product release e. Purchase of capacity and automation is not necessary for new product release

Last Answer : b. One round prior to product release

.As a manager you need to change the automation level of your segment from 2 to 5. The line has a capacity of $2 million. How much would it cost? a. $12 million b. $24 million c. $10 million d. $6 million e. none of the above

Description : .As a manager you need to change the automation level of your segment from 2 to 5. The line has a capacity of $2 million. How much would it cost? a. $12 million b. $24 million c. $10 million d. $6 million e. none of the above

Last Answer : b. $24 million

If a line has a capacity of 100,000 units, the cost of changing the automation level 1 unit either up or down is a. $60,000. b. $40,000. c. $400,000. d. $600,000. e. none of the above.

Description : If a line has a capacity of 100,000 units, the cost of changing the automation level 1 unit either up or down is a. $60,000. b. $40,000. c. $400,000. d. $600,000. e. none of the above.

Last Answer : c. $400,000.

If you want to add 500,000 units of capacity to an assembly line with an automation rating of 5, how much will it cost? a. 1,200,000 b. 1,300,000 c. 13,000,000 d. 24,000,000 e. 26,000,000

Description : If you want to add 500,000 units of capacity to an assembly line with an automation rating of 5, how much will it cost? a. 1,200,000 b. 1,300,000 c. 13,000,000 d. 24,000,000 e. 26,000,000

Last Answer : c. 13,000,000

What trend can be explicitly observed in the industry in which your company is operating? a. More and more products are sold directly to the private end consumer. b. Products become more and more expensive. c. Products become smaller and smaller. d. Customers show less and less brand loyalty. e. All of the above.

Description : What trend can be explicitly observed in the industry in which your company is operating? a. More and more products are sold directly to the private end consumer. b. Products become more and more expensive. ... and smaller. d. Customers show less and less brand loyalty. e. All of the above.

Last Answer : c. Products become smaller and smaller

How much higher are second shift wages than the first shift wages? a. 0 % b. 20 % c. 40 % d. 50 % e. 60 %

Description : How much higher are second shift wages than the first shift wages? a. 0 % b. 20 % c. 40 % d. 50 % e. 60 %

Last Answer : d. 50 %

As a general rule, stock issues are used to: a. Protect you from getting a loan from Big Al. b. Fund the purchase of more market share. c. Fund long term investments in capacity and automation. d. Fund yearly sales and promotional budgets. e. All of the above.

Description : As a general rule, stock issues are used to: a. Protect you from getting a loan from Big Al. b. Fund the purchase of more market share. c. Fund long term investments in capacity and automation. d. Fund yearly sales and promotional budgets. e. All of the above.

Last Answer : c. Fund long term investments in capacity and automation.

At the start of the simulation, all assembly lines have an automation level between: a. 2.0 and 4.0. b. 3.0 and 5.0. c. 4.0 and 6.0. d. 5.0 and 7.0. e. 6.0 and 8.0.

Description : At the start of the simulation, all assembly lines have an automation level between: a. 2.0 and 4.0. b. 3.0 and 5.0. c. 4.0 and 6.0. d. 5.0 and 7.0. e. 6.0 and 8.0.

Last Answer : b. 3.0 and 5.0.

Automation levels are given on a scale of _____ to _____. a. 0.0; 5.0 b. 1.0; 5.0 c. 0.0; 10.0 d. 1.0; 10.0 e. 5.0; 10.0

Description : Automation levels are given on a scale of _____ to _____. a. 0.0; 5.0 b. 1.0; 5.0 c. 0.0; 10.0 d. 1.0; 10.0 e. 5.0; 10.0

Last Answer : d. 1.0; 10.0

Adding one additional unit of capacity costs a. $4 x Change (difference) in Automation Level b. $6 + ($4 x Current Automation Level). c. $6 x Change (difference) in Automation Level. d. $4 + ($6 x Current Automation Level). e. none of these.

Description : Adding one additional unit of capacity costs a. $4 x Change (difference) in Automation Level b. $6 + ($4 x Current Automation Level). c. $6 x Change (difference) in Automation Level. d. $4 + ($6 x Current Automation Level). e. none of these.

Last Answer : b. $6 + ($4 x Current Automation Level).

A new unit of capacity costs $6 for the floor space plus $4 times a. hourly wage. b. automation rating. c. unit cost. d. MTBF. e. $0.65.

Description : A new unit of capacity costs $6 for the floor space plus $4 times a. hourly wage. b. automation rating. c. unit cost. d. MTBF. e. $0.65.

Last Answer : b. automation rating.

There is ______ lag in buying new Capacity and ______ lag in changing Automation. a. 0; 0 b. 1 year; 0 c. 0; 1 year d. 1 year; 1 year e. ½ year; ½ year

Description : There is ______ lag in buying new Capacity and ______ lag in changing Automation. a. 0; 0 b. 1 year; 0 c. 0; 1 year d. 1 year; 1 year e. ½ year; ½ year

Last Answer : d. 1 year; 1 year

When going to a new automation level a. there is a 1 year lag. b. there is a lag dependent on the amount the automation level has been changed. c. there is no lag. d. the lag is dependent on the cost. e. none of the above.

Description : When going to a new automation level a. there is a 1 year lag. b. there is a lag dependent on the amount the automation level has been changed. c. there is no lag. d. the lag is dependent on the cost. e. none of the above.

Last Answer : a. there is a 1 year lag.

.If you are currently producing 100,000 units at an automation level of 5, how much would it cost to maximize automation? a. $500,000 b. $50,000 c. $2,000,000 d. $5,000,000 e. none of the above

Description : .If you are currently producing 100,000 units at an automation level of 5, how much would it cost to maximize automation? a. $500,000 b. $50,000 c. $2,000,000 d. $5,000,000 e. none of the above

Last Answer : c. $2,000,000

.If your current capacity is 10,000 units and your automation level is 5.0, what is the difference of the investment between doubling your capacity and doubling your automation level? a. $60,000 b. $20,000 c. $10,000 d. $520,000 e. $260,000

Description : .If your current capacity is 10,000 units and your automation level is 5.0, what is the difference of the investment between doubling your capacity and doubling your automation level? a. $60,000 b. $20,000 c. $10,000 d. $520,000 e. $260,000

Last Answer : a. $60,000

What is the right formula for capacity investment? a. Investment = Capacity x ($4 x Automation) b. Investment = Capacity x [$10 + ($4 x Automation)] c. Investment = Capacity x [$4 + ($6 x Automation)] d. Investment = Capacity x [$6 + ($4 x Automation)] e. Investment = Capacity x Automation

Description : What is the right formula for capacity investment? a. Investment = Capacity x ($4 x Automation) b. Investment = Capacity x [$10 + ($4 x Automation)] c. Investment = Capacity x [$4 + ($6 x Automation)] d. Investment = Capacity x [$6 + ($4 x Automation)] e. Investment = Capacity x Automation

Last Answer : d. Investment = Capacity x [$6 + ($4 x Automation)]

.If you are currently producing 100,000 units and your automation level is 10, how much will it cost you to double your capacity? a. $1,000,000 b. $4,600,000 c. $100,000 d. $10,000 e. none of the above

Description : .If you are currently producing 100,000 units and your automation level is 10, how much will it cost you to double your capacity? a. $1,000,000 b. $4,600,000 c. $100,000 d. $10,000 e. none of the above

Last Answer : b. $4,600,000

If you increase automation from 2.0 to 5.0, the cost is: a. $12 per unit of capacity. b. $15 per unit of capacity. c. $9 per unit of capacity. d. $6 per unit of capacity. e. Cannot determine with this information.

Description : If you increase automation from 2.0 to 5.0, the cost is: a. $12 per unit of capacity. b. $15 per unit of capacity. c. $9 per unit of capacity. d. $6 per unit of capacity. e. Cannot determine with this information.

Last Answer : a. $12 per unit of capacity.

Which of the following are not considered in the Fine Cut? a. Positioning b. Automation c. Age d. Reliability e. Price

Description : Which of the following are not considered in the Fine Cut? a. Positioning b. Automation c. Age d. Reliability e. Price

Last Answer : b. Automation

When should you purchase the production line to produce a new product? a. The year you create the product b. The year after you create the product c. The year prior to its introduction d. The year of its introduction e. The year after its introduction

Description : When should you purchase the production line to produce a new product? a. The year you create the product b. The year after you create the product c. The year prior to its introduction d. The year of its introduction e. The year after its introduction

Last Answer : c. The year prior to its introduction