What is special about Steering gear Overload safety?

What is special about Steering gear Overload safety?
by

1 Answer

Answer :

Short Circuit protection and were appropriate-single phase protection is fitted. In addition instead of over current protection an Overload alarm is fitted set to operate at not less than twice normal running current.
by

Related questions

When power is restored after a complete power failure, a steering gear pump motor will ____________. A. have to be restarted B. have to be reset C. restart automatically D. trip its overload relays

Description : When power is restored after a complete power failure, a steering gear pump motor will ____________. A. have to be restarted B. have to be reset C. restart automatically D. trip its overload relays

Last Answer : Answer: C

What is an overload relay?*

Description : What is an overload relay?*

Last Answer : What is an overload relay?*

How does a thermal overload relay work?

Description : How does a thermal overload relay work?

Last Answer : The bi-metallic strip in the relay heats up by the over load current and the movement in the bi-metallic strip causes the breaker to trip. The breaker has to be reset (turn off) before turning on ... delay for the bi-metallic strip to cool down after which the breaker can be reset and switched on.

What is the normal setting of overload relays?

Description : What is the normal setting of overload relays?

Last Answer : Ask E/O. Normally 90-100% of rated normal current. Sometimes can be set to 105% of rated current.

What is the meaning of overload?

Description : What is the meaning of overload?

Last Answer : An overload is a current over and above the normal load current (over the load). In other words greater than the original design current. This can be a momentary overload such as the starting ... such as plugging in too many appliances at once or a motor that has faulty bearings or gets jammed

An overload in which of the listed motors will result in the illumination of an indicating light at the propulsion control station alarm panel? A. Fuel pump motor B. Steering motor C. Condensate pump motor D. Forced draft blower motor

Description : An overload in which of the listed motors will result in the illumination of an indicating light at the propulsion control station alarm panel? A. Fuel pump motor B. Steering motor C. Condensate pump motor D. Forced draft blower motor

Last Answer : Answer: B

Is the steering gear box the same on a 1954 and a 1956 International 300 tractor?

Description : Is the steering gear box the same on a 1954 and a 1956 International 300 tractor?

Last Answer : Yes it is check it out here http://www.hemmings.com/hmn/stories/2008/08/01/hmn_feature37.html

In accordance with Coast Guard Regulations (46 CFR), a steering gear feeder circuit from the emergency switchboard or alternate power supply must have the capacity for continuous operation of the rudder 15° side to side in not more than 60 seconds for a A. 1/4 hour B. 1/2 hour C. 1 hour D. 2 hours

Description : In accordance with Coast Guard Regulations (46 CFR), a steering gear feeder circuit from the emergency switchboard or alternate power supply must have the capacity for continuous operation of the rudder 15° side to side in not more than 60 seconds for a A. 1/4 hour B. 1/2 hour C. 1 hour D. 2 hours

Last Answer : Answer: B

Coast Guard Regulations (46 CFR), require that an indicating light at the propulsion control station will operate if overloading or overheating occurs in a _______________. A. forced draft blower motor B. steering gear motor C. fuel pump motor D. condensate pump motor

Description : Coast Guard Regulations (46 CFR), require that an indicating light at the propulsion control station will operate if overloading or overheating occurs in a _______________. A. forced draft blower motor B. steering gear motor C. fuel pump motor D. condensate pump motor

Last Answer : Answer: B

Coast Guard Regulations (46 CFR) require that lighting fixture globes must be protected by guards if the fixtures are located in the ____________. A. steering gear room B. galley C. living quarters D. wheelhouse

Description : Coast Guard Regulations (46 CFR) require that lighting fixture globes must be protected by guards if the fixtures are located in the ____________. A. steering gear room B. galley C. living quarters D. wheelhouse

Last Answer : Answer: A

According to Coast Guard Regulations (46 CFR), which of the following systems must be arranged so as to be energized by the final emergency power source? A. at least one light in the steering gear room B. each power operated watertight door system C. each charging panel for temporary emergency batteries D. all of the above

Description : According to Coast Guard Regulations (46 CFR), which of the following systems must be arranged so as to be energized by the final emergency power source? A. at least one light in the ... operated watertight door system C. each charging panel for temporary emergency batteries D. all of the above

Last Answer : Answer: D

As shown in the illustrations, ordered rudder angle is fed back from the ________________. EL-0097 A. power unit to the magnetic amplifier B. steering gear to the control potentiometer C. magnetic amplifier to the steering gear D. rudder yoke to the non-followup controller

Description : As shown in the illustrations, ordered rudder angle is fed back from the ________________. EL-0097 A. power unit to the magnetic amplifier B. steering gear to the control potentiometer C. magnetic amplifier to the steering gear D. rudder yoke to the non-followup controller

Last Answer : Answer: A

If the steering stand selector switch is allowed to remain in the 'Non-Followup' mode after testing of the steering gear, the rudder will _____________. EL-0097 A. not respond to commands from the helm B. move in one direction only regardless of the movement of the helm C. not respond to output from the rotary actuator D. stop moving only when the helm is counter-rotated to put the pump at neutral stroke

Description : If the steering stand selector switch is allowed to remain in the 'Non-Followup' mode after testing of the steering gear, the rudder will _____________. EL-0097 A. not respond to commands from the ... actuator D. stop moving only when the helm is counter-rotated to put the pump at neutral stroke

Last Answer : Answer: A

The tie rod connects the front wheel spindle arms and is actuated by the steering shaft through a) chain link b) gear link c) tension link d) drag link

Description : The tie rod connects the front wheel spindle arms and is actuated by the steering shaft through a) chain link b) gear link c) tension link d) drag link

Last Answer : d) drag link

Describe the working of recirculating ball type steering gear box with sketch.

Description : Describe the working of recirculating ball type steering gear box with sketch.

Last Answer : Working of Recirculating ball type steering gear box: It consists of worm at the end of steering rod. A nut is mounted on the worm with two sets of balls in the grooves of the worm, in between ... and actual the link rod through the drop arm, resulting in the desired steering of the wheels.

Name the steering gear box used in following: (i) Maruti ‘Alto’ (ii) Tata ‘Sumo’ (iii) Ashok Leyland Truck (iv) Road Roller

Description : Name the steering gear box used in following:  (i) Maruti ‘Alto’  (ii) Tata ‘Sumo’  (iii) Ashok Leyland Truck (iv) Road Roller

Last Answer : (i) Maruti ‘Alto’=========Rack and Pinion Type Gear Box. (ii) Tata ‘Sumo’==========Recireulating Ball Type Gear Box. (iii) Ashok Leyland Truck === Worm and Nut Type Gear Box (iv) Road Roller=========== Worm and Roller Type Steering Gear Box

Draw a sketch of rack and pinion steering gear mechanism. Explain its working.

Description : Draw a sketch of rack and pinion steering gear mechanism. Explain its working.

Last Answer : Working: The rotary motion of the steering wheel is transmitted to the pinion of the steering gear through universal joints. The pinion is mesh with a rack. The circular motion of the pinion is ... relayed through the ball joints and the rods to the stub axles for the wheels to be steered.  

Explain the working of Ackerman steering gear mechanism with neat sketch.

Description : Explain the working of Ackerman steering gear mechanism with neat sketch.

Last Answer : Working: The whole mechanism of Ackerman Steering gear is on the back of the front wheels. The Ackerman steering gear consists of turning pairs The slotted links AM and BH are attached ... each end. The steering is affected by moving CD to the right or left of its nominal position. 

What are the safety precautions when working on electrical equipments?

Description : What are the safety precautions when working on electrical equipments?

Last Answer : Switch off power, wear proper protective clothing, safety shoes, Notice board : Do not switch on - Men at work, stand on rubber mat, remove metal rings, watch bracelets, use proper insulated tools, ... work permit. In case of electrical shock, give proper first aid, check heart beat and pulse.

What safety precautions need to be taken during maintenance on batteries?

Description : What safety precautions need to be taken during maintenance on batteries?

Last Answer : The room needs to be ventilated to prevent explosions due to gases generate by the battery. Protective clothing, gloves and eye protection should be used to prevent acid splash ... flashover. When disconnecting batteries, always disconnect negative terminals first and vice versa when reconnecting.

Name safety tools used in industry for electrical wiring.

Description : Name safety tools used in industry for electrical wiring.

Last Answer : Safety tools used in industry for electrical wiring : 1) Hand gloves 2) Goggles 3) Rubber mats 4) Fire extinguishers 5) Danger notice plates 6) Search lights 7) Safety shoes or Gumboots 8) Ear plugs ... belts 13) Safety mask 14) Fire buckets 15) First aid box 16) Insulating stick or discharge rod

State the function of any two safety tools used in electrical workshop.

Description : State the function of any two safety tools used in electrical workshop. 

Last Answer : 1. Circuit Testers: You need to have a voltage tester of some type for electrical work, and one that you trust is working properly 2. Electrical Tape: Every electrical tool kit should have at ... types of fire safety equipment are designed for detection. 11. Wooden ladder:- working with high level

Why is special lighting used in battery rooms?

Description : Why is special lighting used in battery rooms?

Last Answer : Spark proof lighting is used as explosive gases may be generated during battery charging and so there should be no sparks in the room. Ask E/O for more details.

The X-rays emitted in inner shell transitions are called _____ as their energy depends upon the type of target material. a) gamma rays b) special X-rays c) Characteristic X-rays d) continuous X-rays

Description : The X-rays emitted in inner shell transitions are called _____ as their energy depends upon the type of target material. a) gamma rays b) special X-rays c) Characteristic X-rays d) continuous X-rays

Last Answer : c) Characteristic X-rays

The illustrated motor fails to start and gives a loud hum when the start button is depressed, your first action should be to __________. EL-0007 A. disassemble the motor to fix the centrifical switch so the start windings will be energized B. push the stop button to deenergize the 'M' coil C. reset the thermal overload D. hold the 'M' contactor closed by hand while wearing electrical safety gloves to get motor started

Description : The illustrated motor fails to start and gives a loud hum when the start button is depressed, your first action should be to __________. EL-0007 A. disassemble the motor to fix the centrifical ... D. hold the 'M' contactor closed by hand while wearing electrical safety gloves to get motor started

Last Answer : Answer: B

As shown in the illustration, 'S' is the __________. EL-0017 A. safety switch B. overload trip C. start button D. stop button

Description : As shown in the illustration, 'S' is the __________. EL-0017 A. safety switch B. overload trip C. start button D. stop button

Last Answer : Answer: D

A three-phase, induction-type motor experiences an open in one phase. Which of the listed automatic protective devices will prevent the machine from being damaged? A. Overspeed trip B. Thermal overload relay C. Three-pole safety switch D. Magnetic blowout coil

Description : A three-phase, induction-type motor experiences an open in one phase. Which of the listed automatic protective devices will prevent the machine from being damaged? A. Overspeed trip B. Thermal overload relay C. Three-pole safety switch D. Magnetic blowout coil

Last Answer : Answer: B

When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Description : When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Last Answer : a) Safety jump clutch

When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Description : When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Last Answer : b) Shear device

Which car safety gear is safer?

Description : Which car safety gear is safer?

Last Answer : Expense.

Special laundry detergent for athletic gear?

Description : Special laundry detergent for athletic gear?

Last Answer : ive never heard of this and cant imagine the “special” detergent you are talking about being any better than the reg stuff.

Do I need special gear for fly fishing?

Description : Do I need special gear for fly fishing?

Last Answer : You do need special gear if are going to try fly fishing. There are specific rods, tackle and reels that are used in this sport. The following website offers a variety of fly fishing gear, http://www.flyshop.com/

5) An iron ring of mean circumference of 80 cm is uniformly wound with 500 turns of wire. Calculate the value of flux density that a current of 1 A would produce in the ring. Assume relative permeability 1400.

Description : Please ripley me due to emergency

Last Answer : To calculate the flux density in the ring, you need to use the following formula: B = (μ * I * N) / (2 * π * r) where: B is the flux density in the ring (in teslas) μ is the relative permeability ... 2 * π * 0.127 m) = 0.53 T So the flux density in the ring would be approximately 0.53 teslas.

Can you help me solve my electrical mystery?

Description : Can you help me solve my electrical mystery?

Last Answer : Any signs of animal life? They can get in the walls and chew on the wires. Or is it the entire area served by that breaker? The breaker could be bad. It happens with anything mechanical.

How to tell if a power strip is burned out?

Description : How to tell if a power strip is burned out?

Last Answer : answer:Personally, I would either toss it, or down grade it to outdoor use only. I wouldn’t take a chance with it in the house. Yes, you can let it cool down, then test it again. But a failure is a failure. Does it have a reset button? What price range did you pay?

I accidently soaked an extension cord. Is it safe to use it again after letting it dry out for awhile?

Description : I accidently soaked an extension cord. Is it safe to use it again after letting it dry out for awhile?

Last Answer : The plug end is easier to dry out than the socket end get out your blow-dryer and set it to high and blow the end that got wet for a while. That will get most of the water off/out of ... up or sputter. Most modern extension cords are pretty watertight so there shouldn't be any water down the wire.

How can a solar array power source be bypassed when the batteries run low?

Description : How can a solar array power source be bypassed when the batteries run low?

Last Answer : Ah got it. If anyone else is interested, you need an “automatic transfer switch” – or get a manual one for that mad scientist charm.

How to stop a signal going through a wire?

Description : How to stop a signal going through a wire?

Last Answer : Use a switch or a variable resistor

Air conditioning will not turn on, is it electrical?

Description : Air conditioning will not turn on, is it electrical?

Last Answer : Pull the Thermostat off the wall and see if it is connected correctly to the AC switch. There should be no dangling wires, and the post labeled for the AC should have an attached wire.

What is the speaker driving voltage of an amplifier?

Description : What is the speaker driving voltage of an amplifier?

Last Answer : I have to ask WHY? That said, Speakers and a light bulb are two different types of load, and the the lights will probably fry the output transistor.

Why is my Garbage disposal leaking water from the bottom?

Description : Why is my Garbage disposal leaking water from the bottom?

Last Answer : Replace it. The seal is leaking, and most cases it is just not worth the cost and work, quicker and cheaper to replace it .

Have you ever taken a shower or bath during an electrical storm?

Description : Have you ever taken a shower or bath during an electrical storm?

Last Answer : I’ve heard this rumor, and I too question it’s validity. I mean, if electricity can’t travel up a stream of urine (See mythbusters) I’m pretty sure it couldn’t travel through a shower stream. Perhaps through the drain? In either case, I’ve taken a shower in a storm before, and.. well, you see?

Electrical breaker box is buzzing-why??

Description : Electrical breaker box is buzzing-why??

Last Answer : No! Do not upgrade the breaker. The wire must also be upgraded if you do. Try plugging it in a different room. Is the problem still there?

Laptop What ?

Last Answer : Laptop Yes A Portable Computer.

circuit I mean What ?

Last Answer : electricity Source , conductor , control Instruments , Usage Machines , Protection Machines In combination Such A Path Whose The middle With Current Flowing To be Can Him Circuit Or Circuit Says.

House Wiring How much? Type, What? What ?

Last Answer : House Wiring Mainly Two Type. A ) Surface Wiring B ) Concealed Wiring Surface Wiring 5 Type : 1 ) Batten Wiring 2 ) Conduit Wiring 3 ) Clit Wiring 4 ) Casing Wiring 5 ) M. S. Wiring Concealed Wiring Again Two Type , 1 ) Concealed Conduit 2 ) Concealed Wire Wiring

Coulomb Who Say ?

Last Answer : any Conductive The middle With One Ampere Flow One Seconds Hold on Let's go Of Any Cross section With That Amount Infusion Flowing Is Him One Coulomb Says.

Power Who Say ?

Last Answer : that At the rate Electron Flowing Become Work Done Is Or That At the rate Electricity Power Other In strength Transformed Is Him Electric Power Says.

Power Who Say ?

Last Answer : any Person Or Of the object Single In time Made Of work The amount Power Says.

Magnetic Tell me Line What ?

Last Answer : any Magnetic In the case A Isolated The answer To the pole In the free state Placement If you do The pole That Path Circulation By Him Magnetic Ball line Says.