For MPI using the prods method which of the following statements is true: a) It may cause arc damage on the specimen material surface b) It requires fewer operators therefore is easier c) It can be used with ferritic and non-ferritic materials d) It is quicker than using a yoke type electromegnet

For MPI using the prods method which of the following statements is true:
a) It may cause arc damage on the specimen material surface
b) It requires fewer operators therefore is easier
c) It can be used with ferritic and non-ferritic materials
d) It is quicker than using a yoke type electromegnet
by

1 Answer

Answer :

a) It may cause arc damage on the specimen material surface
by

Related questions

When using multiple SAW arc systems (twin wires etc), the arcs often have different polarities or use all AC rather than DC polarity, this is to? a) Prevent arc blow between arcs b) To maximize productivity c) To even out the power factor on the mains supply d) Make it easier to initiate the arc

Description : When using multiple SAW arc systems (twin wires etc), the arcs often have different polarities or use all AC rather than DC polarity, this is to? a) Prevent arc blow between arcs b) To maximize productivity c) To even out the power factor on the mains supply d) Make it easier to initiate the arc

Last Answer : a) Prevent arc blow between arcs

Heating of ferromagnetic materials to a temperature above Curie temperature makes it (A) Insulator for heat & electricity transmission (B) Ferritic (C) Behave like paramagnetic materials (D) Superconductor

Description : Heating of ferromagnetic materials to a temperature above Curie temperature makes it (A) Insulator for heat & electricity transmission (B) Ferritic (C) Behave like paramagnetic materials (D) Superconductor

Last Answer : Option C

Which of the following statements can be associated with OSI model? a. A structured way to discuss and easier update system components b. One layer may duplicate lower layer functionality c. Functionality at one layer no way requires information from another layer d. It is an application specific network model

Description : Which of the following statements can be associated with OSI model? a. A structured way to discuss and easier update system components b. One layer may duplicate lower layer functionality c. ... no way requires information from another layer d. It is an application specific network model

Last Answer : b. One layer may duplicate lower layer functionality

.Which of the following statements can be associated with OSI model? a. A structured way to discuss and easier update system components b. One layer may duplicate lower layer functionalityc. Functionality at one layer no way requires information from another layer d. It is an application specific network model

Description : .Which of the following statements can be associated with OSI model? a. A structured way to discuss and easier update system components b. One layer may duplicate lower layer functionality c. ... no way requires information from another layer d. It is an application specific network model

Last Answer : Functionality at one layer no way requires information from another layer

In a cross joint tensile test the following observations were made: Specimen width 20mm, Material thickness 20mm, Max Load: 180kN, Break position: Parent Plate. What is the UTS? a) 45 kN/mm b) 450 N/mm2c) 39 kN/mm2d) 39 N/mm2

Description : In a cross joint tensile test the following observations were made: Specimen width 20mm, Material thickness 20mm, Max Load: 180kN, Break position: Parent Plate. What is the UTS? a) 45 kN/mm b) 450 N/mm2c) 39 kN/mm2d) 39 N/mm2

Last Answer : b) 450 N/mm2

Fatigue strength of a material increases by (A) Having notches in the specimen (B) Rise in temperature (C) Under stressing the specimen (D) Having scratches on the surface

Description : Fatigue strength of a material increases by (A) Having notches in the specimen (B) Rise in temperature (C) Under stressing the specimen (D) Having scratches on the surface

Last Answer : (C) Under stressing the specimen

True statements about visual adaptation include: a. light adaptation takes longer than dark adaptation b. dark adaptation reaches its maximum in about 20 minutes c. in dark adapted eye, a higher intensity of light is required to stimulate cones than rodsd. people who wear red goggles in the light adapt quicker in the dark than those who do not wear them

Description : True statements about visual adaptation include: a. light adaptation takes longer than dark adaptation b. dark adaptation reaches its maximum in about 20 minutes c. in dark adapted eye, a higher intensity ... wear red goggles in the light adapt quicker in the dark than those who do not wear them

Last Answer : in dark adapted eye, a higher intensity of light is required to stimulate cones than rods

Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic

Description : Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic

Last Answer : (C) Austenitic

Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic (D) None of these

Description : Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic (D) None of these

Last Answer : (C) Austenitic

Which of the following statements is/are correct? 1. A materials requisition note is used to record the issue of direct material to a specific job. 2. A typical job cost will contain actual costs for material, labour and production overheads, and non –production overheads are often added as a percentage of total production cost 3. The job costing method can be applied in costing batches (a) (1) only (b) (1) and (2) only (c) (1) and (3) only (d) (2) and (3) only

Description : Which of the following statements is/are correct? 1. A materials requisition note is used to record the issue of direct material to a specific job. 2. A typical job cost will contain actual costs for material, labour and production ... 1) and (2) only (c) (1) and (3) only (d) (2) and (3) only

Last Answer : (c) (1) and (3) only

Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. B. Continuous cardiac output monitoring by the thermodilution method requires continuous infusion of fluid injectate at a constant rate and temperature. C. The major advantage of the Fick method over the thermodilution method of calculating cardiac output is that it is noninvasive, requiring only the determination of oxygen consumption by respiratory gas analysis. D. The technique of thoracic electrical bioimpedance utilizes sensors to determine stroke volume by detecting changes in resistance to a small, applied alternating current.

Description : Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. ... stroke volume by detecting changes in resistance to a small, applied alternating current.

Last Answer : Answer: AD DISCUSSION: Various techniques are available to measure cardiac output continuously. The advantages of continuous cardiac output monitoring, as compared with intermittent methods, are (1) ... function of the stroke volume, which then can be used to calculate the cardiac output

EDI requires a. representation of common business documents in computer readable forms b. data entry operators by receivers c. special value added networks d. special hardware at co-operating Business premises

Description : EDI requires a. representation of common business documents in computer readable forms b. data entry operators by receivers c. special value added networks d. special hardware at co-operating Business premises

Last Answer : a. representation of common business documents in computer readable forms 

As shown in the illustrations, ordered rudder angle is fed back from the ________________. EL-0097 A. power unit to the magnetic amplifier B. steering gear to the control potentiometer C. magnetic amplifier to the steering gear D. rudder yoke to the non-followup controller

Description : As shown in the illustrations, ordered rudder angle is fed back from the ________________. EL-0097 A. power unit to the magnetic amplifier B. steering gear to the control potentiometer C. magnetic amplifier to the steering gear D. rudder yoke to the non-followup controller

Last Answer : Answer: A

As compared to wall type breakwater, mound type breakwater (A) Requires skilled labour (B) Requires low maintenance cost (C) Requires less material (D) Results in less damage due to gradual failure

Description : As compared to wall type breakwater, mound type breakwater (A) Requires skilled labour (B) Requires low maintenance cost (C) Requires less material (D) Results in less damage due to gradual failure

Last Answer : (D) Results in less damage due to gradual failure

In transformers using hot rolled steel, the cross-section of the yoke is made about _____ greater than that of the core (a) 5 percent (b) 10 percent (c) 15 percent (d) 30 percent (e) none of the above

Description : In transformers using hot rolled steel, the cross-section of the yoke is made about _____ greater than that of the core (a) 5 percent (b) 10 percent (c) 15 percent (d) 30 percent (e) none of the above

Last Answer : (c) 15 percent

If your computer attacked by a trojan horse virus, what damage it may cause? -Technology

Description : If your computer attacked by a trojan horse virus, what damage it may cause? -Technology

Last Answer : If your computer attacked by a trojan horse virus, it can:1. Steal passwords2. Copy sensitive data3. Carry out any other harmful operations etc.

At high discharge rates, nickel-cadmium storage batteries are superior to lead-acid batteries because they __________. A. require fewer cells for the same voltage and less mounting space B. are able to produce higher voltages and do not have to be charged as often C. can be charged and discharged many times without much damage D. have no individual cells to replace at the end of useful life

Description : At high discharge rates, nickel-cadmium storage batteries are superior to lead-acid batteries because they __________. A. require fewer cells for the same voltage and less mounting space B. are able to ... times without much damage D. have no individual cells to replace at the end of useful life

Last Answer : Answer: C

A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC+ve polarity, and a ROL:of 180mm per min. What would be the arc energy? a) Insufficient information given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Last Answer : d) 2.0 kJ/mm

What are the symptoms of a failed fuel pressure regulator on a 1988 Mercury Cougar with a 3.8L MPI (multi port injection) V6 engine?

Description : What are the symptoms of a failed fuel pressure regulator on a 1988 Mercury Cougar with a 3.8L MPI (multi port injection) V6 engine?

Last Answer : Okay I’m shooting from the hip; car runs rough, stalls when coming to a stop, tailpipe is blackened and dark smoke comes out, oil smells like gasoline and gas mileage has dropped.

Defective electronics fabia 1.4 mpi

Description : Hello, I probably have a problem with some electronic part in the Fabia 1.4 mpi r.2001, it is a frequent showing and sound signaling of the red oil pan, while the oil is in half, fast flashing ... be and how much the theory of material + repair would theoretically come out. Thank you very much.

Last Answer : the problem could be either in the cabling, what is in the engine under the battery and the filter box, the bundle of rot must be isolated and repaired, or the electronics of the dashboard will be in trouble. He wants to entrust it to an experienced car electrician who can handle the stim

for `0ltthetaltpi/2 ` the solution(s) of ` sum_(m=1)^6c o s e c(theta+((m-1)pi)/4)c o s e c(theta+(mpi)/n)=4sqrt(2)` is (are):

Description : for `0ltthetaltpi/2 ` the solution(s) of ` sum_(m=1)^6c o s e c(theta+((m-1)pi)/4)c o s e c(theta+(mpi)/n)=4sqrt(2)` is (are):

Last Answer : for `0ltthetaltpi/2 ` the solution(s) of ` sum_(m=1)^6c o s e c(theta+((m-1)pi)/4)c o s e c(theta+(mpi)/n ... (pi)/(6)` C. `(pi)/(12)` D. `(5pi)/(12)`

Which of following is not a component of MPI? a. Healthb. Educationc. Occupationd. Standard of living

Description : Which of following is not a component of MPI? a. Health b. Education c. Occupation d. Standard of living

Last Answer : c. Occupation MPI has 3 important dimensions to it- health, education and standard of living. Based on these , there are ten parameters.

Which of the following is not valid with reference to Message Passing Interface (MPI)? (A) MPI can run on any hardware platform (B) The programming model is a distributed memory model. (C) All parallelism is implicit. (D) MPI - Comm - Size returns the total number of MPI processes in specified communication.

Description : Which of the following is not valid with reference to Message Passing Interface (MPI)? (A) MPI can run on any hardware platform (B) The programming model is a distributed memory model. (C) All ... implicit. (D) MPI - Comm - Size returns the total number of MPI processes in specified communication.

Last Answer : (C) All parallelism is implicit.

In a welding procedure transverse joint tensile test the following observations were made. The specimen CSA was recorded as 30mm x 20mm and the maximum load applied was recorded as 200kN. What is the UTS? a) 33kN/mm2b) 333N/mm2c) 3333N/mm2d) 33N/mm2

Description : In a welding procedure transverse joint tensile test the following observations were made. The specimen CSA was recorded as 30mm x 20mm and the maximum load applied was recorded as 200kN. What is the UTS? a) 33kN/mm2b) 333N/mm2c) 3333N/mm2d) 33N/mm2

Last Answer : b) 333N/mm2

Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic (bcc) crystal lattice structure is stronger & less ductile than those having face centred cubic (fcc) crystal lattice structure (C) Tungsten has a body centred cubic (bcc) crystal lattice structure (D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Description : Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic ... D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Last Answer : (C) Tungsten has a body centred cubic (bcc) crystal lattice structure

Which of the following statements are true? a. The larger the sample size, the greater the sampling error b. The more categories or breakdowns you want to make in your data analysis, the larger the sample needed c. The fewer categories or breakdowns you want to make in your data analysis, the larger the sample needed d. As sample size decreases, so does the size of the confidence interval

Description : Which of the following statements are true? a. The larger the sample size, the greater the sampling error b. The more categories or breakdowns you want to make in your data analysis, the larger ... the larger the sample needed d. As sample size decreases, so does the size of the confidence interval

Last Answer : b. The more categories or breakdowns you want to make in your data analysis, the larger the sample needed

Auditing standards require a successor auditor to communicate with the predecessor auditor. The Code of Professional Conduct requires confidentiality; therefore, the client's permission must beobtained before the communication can bemade bya. The predecessor auditor.b. The successor auditor.c. Both the successor and predecessorauditor.d. Neither, since this is one of theexceptions to confidentiality in the Codeof Professional Conduc

Description : Auditing standards require a successor auditor to communicate with the predecessor auditor. The Code of Professional Conduct requires confidentiality; therefore, the client's permission must be obtained ... since this is one of the exceptions to confidentiality in the Code of Professional Conduc

Last Answer : The successor auditor

Which option could cause a woman to lose weight quicker?

Description : Which option could cause a woman to lose weight quicker?

Last Answer : When you say quicker, I assume the woman is not really going to change her life, but merely engage in exercise for a while for a short term goal. In that case, method 2, ... routine, you would realize the benefit, assuming reasonable stress management, good diet quality and calorie control.

If requested to perform a review engagement for a nonpublic entity in which an accountant has an immaterial direct financial interest, the accountant is a. Independent because the financial interest is immaterial and, therefore, may issue a review report. b. Not independent and, therefore, may not issue a review report. c. Not independent and, therefore, may not be associated with the financial statements. d. Not independent and, therefore, may issue a review report, but may not issue an auditor's opinion.

Description : If requested to perform a review engagement for a nonpublic entity in which an accountant has an immaterial direct financial interest, the accountant is a. Independent because the financial interest is immaterial ... and, therefore, may issue a review report, but may not issue an auditor's opinion.

Last Answer : Not independent and, therefore, may not issue a review report.

The nurse providing education regarding sexually transmitted diseases includes which of the following statements regarding herpes virus 2 (herpes genitalis)? a) In pregnant women with active herpes virus, babies delivered vaginally may become infected with the virus. Therefore, a cesarean delivery may be performed if the virus recurs near the time of delivery.

Description : The nurse providing education regarding sexually transmitted diseases includes which of the following statements regarding herpes virus 2 (herpes genitalis)? a) In pregnant women with active herpes virus, babies ... very difficult to kill. Usually, the virus is killed at room temperature by drying.

Last Answer : a) In pregnant women with active herpes virus, babies delivered vaginally may become infected with the virus. Therefore, a cesarean delivery may be performed if the virus recurs near the time of delivery.

2G and 2.5G CDMA operators may selectively introduce 3G capabilities at each cell without changing entire base stations and reallocate spectrums. a) True b) False

Description : 2G and 2.5G CDMA operators may selectively introduce 3G capabilities at each cell without changing entire base stations and reallocate spectrums. a) True b) False

Last Answer : a) True

Do you prefer automated operators?

Description : Do you prefer automated operators?

Last Answer : I usually end up pressing zero until I get someone! In automation’s defense, though, I would think it helps if it is actually routing your call to the appropriate person.

RDBMS provides relational operators to manipulate the data. Here, RDBMS refers to (a) Record Database Management System -Technology

Description : RDBMS provides relational operators to manipulate the data. Here, RDBMS refers to (a) Record Database Management System -Technology

Last Answer : (b) RDBMS stands for Relational Database Management System, which provides the operator to manipulate the data stored in the database table.

Explain the Boolean operators and their impact on search result while connecting two keyword “A” and “B”. -Technology

Description : Explain the Boolean operators and their impact on search result while connecting two keyword “A” and “B”. -Technology

Last Answer : a. Introduction/ definition of Boolean Operators, And Or Not.b. If A, B two key words are connected with OR operator and made the string, then the search result would be all those records which have ... since it has key word B so it will not be shown in the search result.Example . . .

Who should have access to the WPQR’S? a) NDT operators b) Inspectors only c) Welders only d) Welding Engineer

Description : Who should have access to the WPQR’S? a) NDT operators b) Inspectors only c) Welders only d) Welding Engineer

Last Answer : d) Welding Engineer

What is the maximum OCV allowable to initiate an arc when using A. C current? a) 1000V b) 10V c) 90V d) 900V

Description : What is the maximum OCV allowable to initiate an arc when using A. C current? a) 1000V b) 10V c) 90V d) 900V

Last Answer : c) 90V

(3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be plated the negative electrode (cathode) or plate in a galvanic couple. Thus a spoon or other object may be connected by a wire to a plate of nickel. The process that occurs on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Description : (3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be ... on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Last Answer : Which of the following is not a method of preparing oxygen? (1) Electrolysis of water (2) Fractional distillation of liquid air (3) Decomposition of potassium permanganate (4) Decomposition of manganese dioxide

18/8 steel is a/an __________ stainless steel. (A) Austenitic (B) Ferritic (C) Martensitic (D) None of these

Description : 18/8 steel is a/an __________ stainless steel. (A) Austenitic (B) Ferritic (C) Martensitic (D) None of these

Last Answer : (A) Austenitic

Which of the following crystal structures characterises the ferritic stainless steel? (A) Face centred cubic (B) Body centred cubic (C) Simple hexagonal (D) None of these

Description : Which of the following crystal structures characterises the ferritic stainless steel? (A) Face centred cubic (B) Body centred cubic (C) Simple hexagonal (D) None of these

Last Answer : (B) Body centred cubic

Cementite is in the lamellar form in the __________ phase of steel. (A) Martenistic (B) Bainitic (C) Pearlitic (D) Ferritic

Description : Cementite is in the lamellar form in the __________ phase of steel. (A) Martenistic (B) Bainitic (C) Pearlitic (D) Ferritic

Last Answer : Option C

Liquid nitrogen containers can be made from (A) Ferritic stainless steel (B) HSLA steel (C) Titanium (D) Austenitic stainless steel

Description : Liquid nitrogen containers can be made from (A) Ferritic stainless steel (B) HSLA steel (C) Titanium (D) Austenitic stainless steel

Last Answer : Option B

Bishop's method of stability analysis (A) Is more conservative (B) Neglects the effect of forces acting on the sides of the slices (C) Assumes the slip surface as an arc of a circle (D) All of the above

Description : Bishop's method of stability analysis (A) Is more conservative (B) Neglects the effect of forces acting on the sides of the slices (C) Assumes the slip surface as an arc of a circle (D) All of the above

Last Answer : Answer: Option C

Interruption of large currents by relay requires (a) arc suppressing blow out coils (b) wide separation of the opened contacts (c) high speed opening of contacts (d) all of the above

Description : Interruption of large currents by relay requires (a) arc suppressing blow out coils (b) wide separation of the opened contacts (c) high speed opening of contacts (d) all of the above

Last Answer : (d) all of the above

The value of Poison’s ratio depends upon (a) Nature of load, tensile or compressive (b) Magnitude of load (c) Material of the test specimen (d) Dimensions of the test specimen

Description : The value of Poison’s ratio depends upon (a) Nature of load, tensile or compressive (b) Magnitude of load (c) Material of the test specimen (d) Dimensions of the test specimen

Last Answer : (c) Material of the test specimen

The area of the yoke in a transformer is taken 15 to 20% larger than that of the core. Why?

Description : The area of the yoke in a transformer is taken 15 to 20% larger than that of the core. Why?

Last Answer : By keeping yoke area 15-20% higher ,the flux density in the yoke is reduced, resulting into reduction in iron losses for yoke. The reduced core area results working flux density and needed to increase the number of turns.

A resistance in a circuit of unknown value is to be tested using the voltmeter/ammeter method. Therefore, the meters should be connected with _____________. A. both meters in series with the resistance B. both meters in parallel with the resistance C. the ammeter in series and the voltmeter in parallel with the resistance D. the ammeter in parallel and the voltmeter in series with the resistance

Description : A resistance in a circuit of unknown value is to be tested using the voltmeter/ammeter method. Therefore, the meters should be connected with _____________. A. both meters in series with the ... parallel with the resistance D. the ammeter in parallel and the voltmeter in series with the resistance

Last Answer : Answer: C

Transfusions of blood products can be associated with a number of complications including immediate and delayed hemolytic reactions; nonhemolytic reactions; infectious disease transmission; and complications of massive transfusions. Which of the following statements are true concerning complications of blood transfusions? a. Immediate hemolytic transfusion reactions are caused by major ABO blood group incompatibility b. Nonhemolytic transfusion reactions are usually due to RH incompatibility and are therefore more common in women of childbearing age c. The most common complication of massive blood transfusion is dilutional thrombocytopenia d. Routine impaired calcium supplementation is necessary during most massive transfusion episodes

Description : Transfusions of blood products can be associated with a number of complications including immediate and delayed hemolytic reactions; nonhemolytic reactions; infectious disease transmission; and ... d. Routine impaired calcium supplementation is necessary during most massive transfusion episodes

Last Answer : Answer: a, c Immediate hemolytic reactions are usually caused by blood group ABO incompatibility although they may be caused by antigens of other blood group systems ... when associated with massive transfusion during complex intraoperative procedures such as thoracoabdominal aneurysm resection

Rittinger's number designates the new surface created per unit mechanical energy absorbed by the material being crushed. Larger value of Rittinger's number of a material indicates its (A) Easier grindability (B) Poor grindability (C) High power consumption in grinding (D) None of these

Description : Rittinger's number designates the new surface created per unit mechanical energy absorbed by the material being crushed. Larger value of Rittinger's number of a material indicates its (A) Easier grindability (B) Poor grindability (C) High power consumption in grinding (D) None of these

Last Answer : (A) Easier grindability