Bishop's method of stability analysis (A) Is more conservative (B) Neglects the effect of forces acting on the sides of the slices (C) Assumes the slip surface as an arc of a circle (D) All of the above

Bishop's method of stability analysis
(A) Is more conservative
(B) Neglects the effect of forces acting on the sides of the slices
(C) Assumes the slip surface as an arc of a circle
(D) All of the above
by

1 Answer

Answer :

Answer: Option C
by

Related questions

Coulomb's wedge theory assumes that (A) Back fill is dry, cohesionless, homogeneous and isotropic (B) Slip surface is the plane which passes through the heel of the wall (C) Position and direction of the resultant earth pressure are known (D) All the above

Description : Coulomb's wedge theory assumes that (A) Back fill is dry, cohesionless, homogeneous and isotropic (B) Slip surface is the plane which passes through the heel of the wall (C) Position and direction of the resultant earth pressure are known (D) All the above

Last Answer : (D) All the above

Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Description : Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Last Answer : Answer: Option C

According to law of triangle of forces (A) Three forces acting at a point will be in equilibrium (B) Three forces acting at a point can be represented by a triangle, each side being proportional to force (C) If three forces acting upon a particle are represented in magnitude and direction by the sides of a triangle, taken in order, they will be in equilibrium (D) If three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two

Description : According to law of triangle of forces  (A) Three forces acting at a point will be in equilibrium  (B) Three forces acting at a point can be represented by a triangle, each side ... point are in equilibrium, each force is proportional to the sine of  the angle between the other two 

Last Answer : (C) If three forces acting upon a particle are represented in magnitude and direction by the  sides of a triangle, taken in order, they will be in equilibrium

Which is the correct statement about law of polygon of forces? (A) If any number of forces acting at a point can be represented by the sides of a polygon taken in order, then the forces are in equilibrium (B) If any number of forces acting at a point can be represented in direction and magnitude by the sides of a polygon, then the forces are in equilibrium (C) If a polygon representing forces acting at a point is closed then forces are in equilibrium (D) If any number of forces acting at a point can be represented in direction and magnitude by the sides of a polygon taken in order, then the forces are in equilibrium

Description : Which is the correct statement about law of polygon of forces?  (A) If any number of forces acting at a point can be represented by the sides of a polygon taken  in order, then the ... direction and magnitude by  the sides of a polygon taken in order, then the forces are in equilibrium 

Last Answer : (D) If any number of forces acting at a point can be represented in direction and magnitude by  the sides of a polygon taken in order, then the forces are in equilibrium 

According to Lami's theorem (A) Three forces acting at a point will be in equilibrium (B) Three forces acting at a point can be represented by a triangle, each side being proportional to force (C) If three forces acting upon a particle are represented in magnitude and direction by the sides of a triangle, taken in order, they will be in equilibrium (D) If three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two

Description : According to Lami's theorem (A) Three forces acting at a point will be in equilibrium (B) Three forces acting at a point can be represented by a triangle, each side being proportional to ... point are in equilibrium, each force is proportional to the sine of the angle between the other two

Last Answer : Answer: Option D

A drop of liquid assumes spherical shape because: (1) Intermolecular forces are strong in liquids (2) A sphere has the least surface area for a given volume (3) A sphere has the largest surface area for a given volume (4) Inter molecular forces are weak in liquids

Description : A drop of liquid assumes spherical shape because: (1) Intermolecular forces are strong in liquids (2) A sphere has the least surface area for a given volume (3) A sphere has the largest surface area for a given volume (4) Inter molecular forces are weak in liquids

Last Answer : (2) A sphere has the least surface area for a given volume Explanation: A drop of liquid assumes spherical shape because a sphere has the least surface area for a given volume.

A drop of liquid assumes spherical shape because: (1) Intermolecular forces are strong in liquids (2) A sphere has the least surface area for a given volume (3) A sphere has the largest surface area for a given volume (4) Inter molecular forces are weak in liquids

Description : A drop of liquid assumes spherical shape because: (1) Intermolecular forces are strong in liquids (2) A sphere has the least surface area for a given volume (3) A sphere has the largest surface area for a given volume (4) Inter molecular forces are weak in liquids

Last Answer : A sphere has the least surface area for a given volume

Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Description : Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Last Answer : Answer: Option D

The method of the slices is applicable to (A) Homogenous soils (B) Stratified soils (C) Saturated soils (D) Non-uniform slopes

Description : The method of the slices is applicable to (A) Homogenous soils (B) Stratified soils (C) Saturated soils (D) Non-uniform slopes

Last Answer : Answer: Option A

The statement --- if forces acting on a point can be represented in magnitude and direction by the sides of a polygon taken in order then their resultant will be represented in magnitude and direction by the closing side of the polygon taken in opposite order ---- is known as a.Law of triangle of forces b.Newton's law of forces c.Law of polygon of forces d.D'Alembert's rule e.Lami's theorem

Description : The statement --- if forces acting on a point can be represented in magnitude and direction by the sides of a polygon taken in order then their resultant will be represented in magnitude and direction by the closing ... 's law of forces c.Law of polygon of forces d.D'Alembert's rule e.Lami's theorem

Last Answer : c. Law of polygon of forces

The flow which neglects changes in a transverse direction is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Description : The flow which neglects changes in a transverse direction is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Last Answer : Answer: Option A

Can the sentence “The analysis of the soils forces acting on...” be revised as “The analysis of the soils forces acting on..”?

Description : Can the sentence “The analysis of the soils forces acting on...” be revised as “The analysis of the soils forces acting on..”?

Last Answer : answer:The analysis must be simplified to obtain Both of the other ones sound a bit awkward to me, the second one moreso than the first. Making simplifications is something that you, the scientist, are ... me. Mostly because made is not really a verb that makes sense for an analysis, I think.

In the displacement method of structural analysis, the basic unknowns are (A) Displacements (B) Force (C) Displacements and forces (D) None of the above

Description : In the displacement method of structural analysis, the basic unknowns are (A) Displacements (B) Force (C) Displacements and forces (D) None of the above

Last Answer : (A) Displacements

For structural analysis of forces, the method refers to (A) Moment-area-theorem (B) Three-moment equation (C) Maxwell's reciprocal theorem (D) None of these

Description : For structural analysis of forces, the method refers to  (A) Moment-area-theorem  (B) Three-moment equation  (C) Maxwell's reciprocal theorem  (D) None of these

Last Answer : (A) Moment-area-theorem 

Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Description : Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Last Answer : Answer: Option D

Consider the following statements regarding Coulomb’s theory of earth pressure: 1. It is based on wedge theory of earth pressure. 2. It assumes the wall surface to be rough. 3. It may or may not satisfy the static equilibrium condition occurring in nature. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements regarding Coulomb's theory of earth pressure: 1. It is based on wedge theory of earth pressure. 2. It assumes the wall surface to be rough. 3. It may or may not satisfy the static equilibrium condition ... 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (b) 1 & 2 only

In hill roads the side drains arc provided (A) Only on the hill side of road (B) Only on the opposite side of hill (C) On both sides of roa(D) None of the above

Description : In hill roads the side drains arc provided (A) Only on the hill side of road (B) Only on the opposite side of hill (C) On both sides of roa (D) None of the above

Last Answer : Answer: Option A

Which of the following is true? A. Discounted cash flow analysis is the least precise of the cash flow techniques, because it does not consider the time value of money. B. NPV is the least precise of the cash flow analysis techniques, because it assumes reinvestment at the discount rate. C. Payback period is the least precise of the cash flow analysis techniques, because it does not consider the time value of money. D. IRR is the least precise of the cash flow analysis techniques, because it assumes reinvestment at the cost of capital.

Description : Which of the following is true?  A. Discounted cash flow analysis is the least precise of the cash flow techniques, because  it does not consider the time value of money. B. NPV is ... least precise of the cash flow analysis techniques, because it assumes  reinvestment at the cost of capital.

Last Answer : C. Payback period is the least precise of the cash flow analysis techniques, because it  does not consider the time value of money.

If S, L and R are the arc length, long chord and radius of the sliding circle then the perpendicular distance of the line of the resultant cohesive force, is given by (A) a = S.R/L (B) a = L.S/R (C) a = L.R/S (D) None of these

Description : If S, L and R are the arc length, long chord and radius of the sliding circle then the perpendicular distance of the line of the resultant cohesive force, is given by (A) a = S.R/L (B) a = L.S/R (C) a = L.R/S (D) None of these

Last Answer : (A) a = S.R/L

In an AC generator, direct current from a separate source is passed through the windings of the rotor _____________. A. by means of slip rings and brushes B. by means of a commutator C. by means of rotating bar magnet D. to minimize the danger of arc over

Description : In an AC generator, direct current from a separate source is passed through the windings of the rotor _____________. A. by means of slip rings and brushes B. by means of a commutator C. by means of rotating bar magnet D. to minimize the danger of arc over

Last Answer : Answer: A

The earth's gravitational force field is said to be conservative force field because a.The work acted by the earth's gravitational field on a particle is independent on the path traced out by the particle b.The work acted by the erth's gravitational field will cause same path for all particles irrespective of their mass c.The direction of gravitational force is fixed d.The gravitational field has only single directional component always acting normal to a body e.The value of gravitational force rise is fixed

Description : The earth's gravitational force field is said to be conservative force field because a.The work acted by the earth's gravitational field on a particle is independent on the path traced out by ... directional component always acting normal to a body e.The value of gravitational force rise is fixed

Last Answer : a. The work acted by the earth's gravitational field on a particle is independent on the path traced out by the particle

Though conservative forces were able to suppress liberal movements in 1848, they could not restore the old order. How? -SST 10th

Description : Though conservative forces were able to suppress liberal movements in 1848, they could not restore the old order. How? -SST 10th

Last Answer : (i) Monarchs now began to realise that the cycles of revolution and repression would only be ended by granting concessions to the liberal-nationalist revolutionaries. (ii) Therefore, in the years after ... and in Russia. (iv) The Habsburg rulers granted more autonomy to the Hungarians in 1867.

Distinguish between : (A) Real and pseudo forces, (B) Conservative and non-conservative forces,

Description : Distinguish between : (A) Real and pseudo forces, (B) Conservative and non-conservative forces,

Last Answer : Distinguish between : (A) Real and pseudo forces, (B) Conservative and non-conservative ... (D) Inertial and non-inertial frames of reference.

When the work done in moving a particle round a closed loop in a field is zero, the forces in the field are called A. Zero forces B. Non-Conservative forces C. Conservative forces D. Viscous forces

Description : When the work done in moving a particle round a closed loop in a field is zero, the forces in the field are called A. Zero forces B. Non-Conservative forces C. Conservative forces D. Viscous forces

Last Answer : Conservative forces

Is Pope Francis giving local bishops (Cardinals) the authority to lift the celibacy requirement for priests?

Description : Is Pope Francis giving local bishops (Cardinals) the authority to lift the celibacy requirement for priests?

Last Answer : No. Wait for the official statement. I think that the pope will route out those in the priesthood that have uncontrolled sexual feelings.

Bishop's Weed recipe's

Description : Bishop's Weed recipe's

Last Answer : After reading up on this plant, I don't think that I would eat this. The monska used it for medicinal purposes.....some pinched young leaves as pot herbs....but if picked after June can cause a laxative effect and is very bitter. I would feel safer eating spinach.

which of these phrases from Elizabeth Bishop's poem "The fish" most shows that the fish has lived a long time is a example of a personification?

Description : which of these phrases from Elizabeth Bishop's poem "The fish" most shows that the fish has lived a long time is a example of a personification?

Last Answer : here is my answer it may be wrong if so comment belowHis brown skin hung in stripes / like ancient wall paper, I will found out in a minute if I was wrong

Bishop's Gymnasium in České Budějovice

Description : Hello, I wanted to ask if anyone here has experience with entrance exams at the Bishop's Grammar School. I looked at the entrance exams that used to be and I managed 2 tasks and I wasn't ... . Can I find someone here who is studying at this grammar school and has experience with entrance exams?

Last Answer : I am a study type vs. But I just couldn't handle those receivers, study further. (tuxedo)

Which of the following is an example of fraudulent financial reporting? a. The treasurer diverts customer payments to his personal due, concealing hisactions by debiting an expense account,thus overstating expenses. b. Company management changesinventory count tags and overstatesending inventory, while understatingcost of goods sold. c. An employee steals inventory and the“shrinkage” is recorded in cost of goodssold. d. An employee steals small tools from thecompany and neglects to return them;the cost is reported as a miscellaneousoperating expense

Description : Which of the following is an example of fraudulent financial reporting? a. The treasurer diverts customer payments to his personal due, concealing hisactions by debiting an expense account, thus ... the company and neglects to return them; the cost is reported as a miscellaneous operating expense

Last Answer : Company management changes inventory count tags and overstates ending inventory, while understating cost of goods sold

Whoever fraudulently retains or willfully secretes or makes away with, or keeps or detains, or when required by an officer of the post office, neglects or refuses to deliver up a) Punishable with imprisonment for a term which may extend to two years, and shall also be punishable with fineb) Shall be punishable with fine which may extend to two hundred rupees :c) Punishable with fine which may extend to two hundred rupeesd) None of these

Description : Whoever fraudulently retains or willfully secretes or makes away with, or keeps or detains, or when required by an officer of the post office, neglects or refuses to deliver up a) Punishable with ... rupees : c) Punishable with fine which may extend to two hundred rupees d) None of these

Last Answer : a) Punishable with imprisonment for a term which may extend to two years, and shall also be punishable with fine

Where the seller wrongfully neglects or refuses to deliver the goods to the buyer, the buyer may sue for: A. Damages for non-delivery B. Damages for non-acceptance C. Specific performance D. Compensation

Description : Where the seller wrongfully neglects or refuses to deliver the goods to the buyer, the buyer may sue for: A. Damages for non-delivery B. Damages for non-acceptance C. Specific performance D. Compensation

Last Answer : A. Damages for non-delivery

Classical economists’ neglects---- side in their theories. (a) demand (b) supply © savings (d) investment

Description : Classical economists’ neglects---- side in their theories. (a) demand (b) supply © savings (d) investment

Last Answer : (a) demand

If three forces acting in different planes can be represented by a triangle, these will be in (A) Non-equilibrium (B) Partial equilibrium (C) Full equilibrium (D) None of the above

Description : If three forces acting in different planes can be represented by a triangle, these will be in  (A) Non-equilibrium  (B) Partial equilibrium  (C) Full equilibrium  (D) None of the above 

Last Answer : (A) Non-equilibrium 

Two non-collinear parallel equal forces acting in opposite direction (A) Balance each other (B) Constitute a moment (C) Constitute a couple (D) Constitute a moment of couple

Description : Two non-collinear parallel equal forces acting in opposite direction  (A) Balance each other  (B) Constitute a moment  (C) Constitute a couple  (D) Constitute a moment of couple 

Last Answer : (C) Constitute a couple 

A force acting on a body may (A) Introduce internal stresses (B) Balance the other forces acting on it (C) Retard its motion (D) All of the above

Description : A force acting on a body may  (A) Introduce internal stresses  (B) Balance the other forces acting on it  (C) Retard its motion  (D) All of the above 

Last Answer : (D) All of the above 

Forces are called coplanar when all of them acting on body lie in (A) One point (B) One plane (C) Different planes (D) Perpendicular planes

Description : Forces are called coplanar when all of them acting on body lie in  (A) One point  (B) One plane  (C) Different planes  (D) Perpendicular planes 

Last Answer : (B) One plane 

two forces acting at a joint are not along the straight line, then for the equilibrium of the joint (A) One of the forces must be zero (B) Each force must be zero (C) Forces must be equal and of the same sign (D) Forces must be equal in magnitude but opposite in sign

Description : two forces acting at a joint are not along the straight line, then for the equilibrium of the joint (A) One of the forces must be zero (B) Each force must be zero (C) Forces must be equal and of the same sign (D) Forces must be equal in magnitude but opposite in sign

Last Answer : (B) Each force must be zero

If three forces acting in one plane upon a rigid body, keep it in equilibrium, then they must either (A) Meet in a point (B) Be all parallel (C) At least two of them must meet (D) All the above are correct

Description : If three forces acting in one plane upon a rigid body, keep it in equilibrium, then they must either (A) Meet in a point (B) Be all parallel (C) At least two of them must meet (D) All the above are correct

Last Answer : (D) All the above are correct

A number of forces acting at a point will be in equilibrium if (A) Their total sum is zero (B) Two resolved parts in two directions at right angles are equal (C) Sum of resolved parts in any two perpendicular directions are both zero (D) All of them are inclined equally

Description : A number of forces acting at a point will be in equilibrium if (A) Their total sum is zero (B) Two resolved parts in two directions at right angles are equal (C) Sum of resolved parts in any two perpendicular directions are both zero (D) All of them are inclined equally

Last Answer : (C) Sum of resolved parts in any two perpendicular directions are both zero

Froude number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Description : Froude number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion ... gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Last Answer : Answer: Option C

Reynolds number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Description : Reynolds number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion ... gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Last Answer : Answer: Option B

For MPI using the prods method which of the following statements is true: a) It may cause arc damage on the specimen material surface b) It requires fewer operators therefore is easier c) It can be used with ferritic and non-ferritic materials d) It is quicker than using a yoke type electromegnet

Description : For MPI using the prods method which of the following statements is true: a) It may cause arc damage on the specimen material surface b) It requires fewer operators therefore is easier c) ... be used with ferritic and non-ferritic materials d) It is quicker than using a yoke type electromegnet

Last Answer : a) It may cause arc damage on the specimen material surface

Which of the following assumes constant molal vaporisation and overflow?(A) McCabe-Thiele method (B) Ponchan-Savarit method (C) Enthalpy concentration method (D) Plate absorption column

Description : Which of the following assumes constant molal vaporisation and overflow? (A) McCabe-Thiele method (B) Ponchan-Savarit method (C) Enthalpy concentration method (D) Plate absorption column

Last Answer : (A) McCabe-Thiele method

Which of the following is true regarding IRR?A. IRR assumes reinvestment at the cost of capital. B. IRR is the discount rate when NPV is greater than zero. C. IRR is a constrained optimization method. D. IRR is the discount rate when NPV is equal to zero.

Description : Which of the following is true regarding IRR? A. IRR assumes reinvestment at the cost of capital. B. IRR is the discount rate when NPV is greater than zero. C. IRR is a constrained optimization method. D. IRR is the discount rate when NPV is equal to zero.

Last Answer : D. IRR is the discount rate when NPV is equal to zero.

The difference in the lengths of an arc and its subtended chord on the earth surface for a distance of 18.2 km, is only (A) 1 cm (B) 5 cm (C) 10 cm (D) 100 cm

Description : The difference in the lengths of an arc and its subtended chord on the earth surface for a distance of 18.2 km, is only (A) 1 cm (B) 5 cm (C) 10 cm (D) 100 cm

Last Answer : (C) 10 cm

For slopes of limited extent the surface of slippage, is usually along (A) A parabolic arc (B) An elliptical arc (C) A straight line (D) A circular arc

Description : For slopes of limited extent the surface of slippage, is usually along (A) A parabolic arc (B) An elliptical arc (C) A straight line (D) A circular arc

Last Answer : (D) A circular arc

Rankine's theory of earth pressure assumes that the back of the wall is (A) Plane and smooth (B) Plane and rough (C) Vertical and smooth (D) Vertical and rough

Description : Rankine's theory of earth pressure assumes that the back of the wall is (A) Plane and smooth (B) Plane and rough (C) Vertical and smooth (D) Vertical and rough

Last Answer : Answer: Option C

Terzaghi's theory of one dimensional consolidation assumes (A) Load is applied in one direction (B) Coefficient of permeability is constant (C) Excess pore water drains out only in the vertical direction (D) All the above

Description : Terzaghi's theory of one dimensional consolidation assumes (A) Load is applied in one direction (B) Coefficient of permeability is constant (C) Excess pore water drains out only in the vertical direction (D) All the above

Last Answer : Answer: Option D

The design of a retaining wall assumes that the retained earth (A) Is dry (B) Is free from moisture (C) Is not cohesive (D) All the above

Description : The design of a retaining wall assumes that the retained earth (A) Is dry (B) Is free from moisture (C) Is not cohesive (D) All the above

Last Answer : Answer: Option D

In the estimate of design flood, Dickens assumes that high flood in cumecs, is proportional to catchment area raised to the power (A) 1/4 (B) 1/2 (C) 3/4 (D) 2/3

Description : In the estimate of design flood, Dickens assumes that high flood in cumecs, is proportional to catchment area raised to the power (A) 1/4 (B) 1/2 (C) 3/4 (D) 2/3

Last Answer : Answer: Option C