Description : What information should be recorded as a minimum, on a completed production weld? a) Size and type of electrode and b) Welding supervisor’s name c) Welder’s Identification, date and weld number d) Welding inspectors name
Last Answer : c) Welder’s Identification, date and weld number
Description : Who should select the specific welds for NDT, to cover the 10% contractual percentage required by the specification/Code? a) Anyone can select the welds as its just a random choice b) The welder ... welding is always carried out to a high standard the use of percentage NDT is of no real value
Last Answer : c) This will be referenced in the inspection and test plan
Description : t is permissible to allow trainee welder to carry out production welding? a) Never b) Yes as long as the supervisor is happy with his workmanship standard c) Yes as long as he has the approved ... cover the intended scope of work d) Yes as long as no NDT is required on the finished weld
Last Answer : a) Never
Description : The welders have increased the voltage on the SAW welding set, what would be the effect on the weld appearance? a) No effect b) The weld width would be narrower c) The penetration will be increased d) The weld width would be wider
Last Answer : d) The weld width would be wider
Description : I'm watching welding how-to videos on the Internet. Should I be wearing a welder's helmet?
Last Answer : Wear the helmet. I father arc welded something without a helmet because it was a real quick job. He was in agony that night. Never do it without the helmet. And you watch the arc to lay down a smooth bead.
Description : how much do welders get paid and what is the safest welding job?
Last Answer : They can make 60,000-100,000 but not on the safest job safest would be working auto body
Description : Who has the responsibility of ensuring the welder is using the correct polarity during welding? a) The welder and the welding inspector b) Store man and the welder c) Welding Engineer d) The Q/A department
Last Answer : a) The welder and the welding inspector
Description : Who is responsible for site safety? a) Site Quality Engineer b) Welding Supervisor c) An approved safety engineer d) Everyone
Last Answer : d) Everyone
Description : Who determines what the correct weld preparation (root gap, root face, included angle) should be? a) The welding engineer b) The welding supervisor c) The welder will decide d) The inspector will recommend what is suitable
Last Answer : a) The welding engineer
Description : Why is it essential to clean the excess weld metal on completion of the production weld? a) So it can be ready for painting b) To remove any rust c) To ensure it is suitably clean for visual inspection and NDT d) To remove slag from the undercut
Last Answer : c) To ensure it is suitably clean for visual inspection and NDT
Description : How is preheat for tack welds during assembly and fit up determined? a) By the welders as they have extensive knowledge b) The fabrication specification/WPS will give the requirements c) The fabrication drawing will give all the information d) Any temperature will do as it is only a tack weld
Last Answer : b) The fabrication specification/WPS will give the requirements
Description : Why would visual inspection of the excess weld metal at the bottom of a cross country pipeline be important? a) It is the most difficult area to weld b) It is the dirtiest part of the pipe as ... ground c) Welders always forget to weld the bottom d) It is the most difficult area to radiograph
Last Answer : a) It is the most difficult area to weld
Description : Some of the C++ operators cannot overloaded which are i) Member access operators (. And .*) ii) Conditional operator (? :) iii) Scope resolution operator (: :) iv) Size operator (sizeof) A) only i, ii and iii B) only ii, iii and iv C) only ii and iv D) All i, ii, iii and iv
Last Answer : D) All i, ii, iii and iv
Description : What is the average salary for an entry level job as a welding engineer?
Last Answer : The average salery for an entry level job as a welding engineeris pretty good you will make $56000 a year which isn't bad its amoderate living to survive.
Description : The friend functions are used in situations where A) We want to exchange data between classes B) We want to have access to unrelated classes C) Dynamic binding is required D) We want to create versatile overloaded operators.
Last Answer : A) We want to exchange data between classes
Description : Are there any ndt position or etlectrical functional testing?
Last Answer : You could try calling an electrician and see what it takes to get aprenticed.
Description : State the importance of NDT and state working principle of Rebound hammer.
Last Answer : Importance of NDT: 1. The strength can be tested without physical breaking of concrete; hence it is safe. 2. It can give internal flaws, cavities and homogeneity details of concrete within short period. 3. ... . But if rebound of hammer is less, then tested concrete may be soft, porous and moist.
Description : factors on which NDT method can be selected.
Last Answer : i) Codes or standard requirement ii) Specification of material to be tested, for example, nature of material, its size and shape iii) Type of disorders to be detected, also depend on nature ... is also depending on the equipments available for testing vi) Total cost required to test the material.
Description : Do you prefer automated operators?
Last Answer : I usually end up pressing zero until I get someone! In automation’s defense, though, I would think it helps if it is actually routing your call to the appropriate person.
Description : RDBMS provides relational operators to manipulate the data. Here, RDBMS refers to (a) Record Database Management System -Technology
Last Answer : (b) RDBMS stands for Relational Database Management System, which provides the operator to manipulate the data stored in the database table.
Description : Explain the Boolean operators and their impact on search result while connecting two keyword “A” and “B”. -Technology
Last Answer : a. Introduction/ definition of Boolean Operators, And Or Not.b. If A, B two key words are connected with OR operator and made the string, then the search result would be all those records which have ... since it has key word B so it will not be shown in the search result.Example . . .
Description : For MPI using the prods method which of the following statements is true: a) It may cause arc damage on the specimen material surface b) It requires fewer operators therefore is easier c) ... be used with ferritic and non-ferritic materials d) It is quicker than using a yoke type electromegnet
Last Answer : a) It may cause arc damage on the specimen material surface
Description : Duties of Inspectors, R.M.S. are a) Entrusted mainly with the duties of checking the sorting work done by sections and mail offices b) Making investigations into important cases of loss, fraud etc ... to the office of Heads of Circles they are designated as Sorting Inspectors. d) All the above
Last Answer : d) All the above
Description : It will be the _______ duty to prepare and prescribe ____(M-53) indicating the beats of the ____attached to each head, ____in his sub-division(Including first class head offices) a) Supdt, route ... Inspector's, route lists and beat maps, village postmen, sub and branch office d) None of these
Last Answer : c) Inspector’s, route lists and beat maps, village postmen, sub and branch office
Description : Postmaster of HO who are subordinate to the super indent, Inspectors and SP, Head clerk also report every transfer or assumption of chart to the a) Group B Officer of division b) Postmaster General c) Head of the circle d) None of these
Last Answer : c) Head of the circle
Description : Mark the correct option a) Not more than one indent for the same office should be submitted in a month b) Superintendents prepare indents for the articles required for themselves and for their inspectors. c ... the number and date of the authority for the recovery of the same e) All the above
Last Answer : e) All the above
Description : Mark the correct option a) The due mail and sorting list for PO and mail offices in communication with offices in more than one RMS Dn are prepared and supplied by the Head of the circle b) ... are prepared and supplied to Head, Sub and Branch office by Sub divisional Inspectors. d) All the above
Description : The person who headed U. N. Weapons Inspectors in Iraq was—
Last Answer : Hans Blix
Description : ___ play an important role in the development of new foods and nonfood uses. a. Bakers c. Chemists b. Butchers d. Inspectors
Last Answer : c. Chemists
Description : ____ prepare pies, breads, rolls, muffins, cookies, cakes, icings and frostings, and many other foods, depending on where they work. a. Inspectors c. Butchers b. Bakers d. Chefs
Last Answer : b. Bakers
Description : What is the best home remedy for welders flash burn?
Last Answer : answer:Potato works great. My dad owned a welding and machine shop. I went there after school to sweep for Lego money. I got welders flash and it is horrible. My mom cut a potato in half and put them on my eyes and it worked. And welders flash is insanely painful.
Description : What exactly are Hobart welders?
Last Answer : Welder is a tradesman who specializes in welding materials together. Welding is a process that joins materials. Hobart Welders is a brand of welding machines. And yes, they are good.
Description : What is the validity after Refresher course for welders (TW-2)? (i) Six monyhs (ii) One year (iii) Two years.* (iv) All are wrong
Last Answer : (iii) Two years.*
Description : What is the duration for Refresher course for welders (TW-2)? (i) One week* (ii) Two weeks (iii) As decided by TPP/LKO (iv) 3 working days
Last Answer : (i) One week*
Description : What is the duration for Initial course for welders (TW-1)? (i) Two weeks* (ii) One week (iii) As decided by TPP/LKO (iv) 3 working days
Last Answer : (i) Two weeks*
Description : The terminal characteristics of a dc generator suitable for electric welders is (A) separately excited generator (B) shunt generator (C) series generator (D) differentially compounded generator
Last Answer : The terminal characteristics of a dc generator suitable for electric welders is differentially compounded generator
Description : When would you measure the minimum preheat temperature? a) On completion of each pass b) Immediately prior to commencing the first pass and subsequent passes c) When the welding is ... preheat temperature measurement is only required if the heat input is lower than that specified in WPS
Last Answer : b) Immediately prior to commencing the first pass and subsequent passes
Description : Ideas for something fun to reverse engineer and take apart?
Last Answer : answer:While this might sound boring, ripping apart our front loading washing machine to clean the pump was interesting. It wasn't really hard but it was interesting. I just tried to replace the home ... iPhone 4 and it was a fucking disaster. A washing machine is way easier to get back together.
Description : The first chip ………… was made by Intel in 1971 scientist Ted Hoff and engineer Frederico Faggin -Technology
Last Answer : The first chip Intel 4004was made by Intel in 1971 scientist Ted Hoff and engineer Frederico Faggin
Description : What would be the most likely SAW flux type for welding medium carbon steel which requires impact testing: a) Cellulosic b) Rutile c) Fused d) Agglomerated
Last Answer : d) Agglomerated
Description : Which of the following defects is usually associated with the MAG GMAW) welding process when using Dip Transfer? a) Centerline cracking b) Lack of side wall Fusion c) Undercut d) Tungsten inclusions
Last Answer : b) Lack of side wall Fusion
Description : When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if ... ) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use
Last Answer : b) None if they were in a sealed vacuum pack prior to use
Description : Which of the following uses a flat characteristic? a) MAG (GMAW) b) Oxy-fuel gas welding c) Resistance spot welding d) SAW using greater than 1000 amps
Last Answer : a) MAG (GMAW)
Description : What is the mode of metal transfer for the TIG (GTAW) welding process? a) Spray Transfer b) Globular Transfer c) Dip Transfer d) None of the above
Last Answer : d) None of the above
Description : When MMA welding what will be the effect on the weld f the power source was changed from AC to DC-ve? a) None b) Higher deposition rate c) It would slightly increase the depth of penetration d) The arc would become unstable
Last Answer : b) Higher deposition rate
Description : What is a typical ARC voltage setting when welding with the TIG (GTAW) process? a) 18-20V b) 24-26V c) 10-12V d) 70-90V
Last Answer : c) 10-12V
Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm
Last Answer : d) 2.0 kJ/mm
Description : In a welding procedure transverse joint tensile test the following observations were made. The specimen CSA was recorded as 30mm x 20mm and the maximum load applied was recorded as 200kN. What is the UTS? a) 33kN/mm2b) 333N/mm2c) 3333N/mm2d) 33N/mm2
Last Answer : b) 333N/mm2
Description : Why is the OCV capped at voltage setting? a) To save electricity b) To prevent exploding of the consumable c) Allow smooth transition into welding voltage range d) To reduce the risk of fatality
Last Answer : c) Allow smooth transition into welding voltage range
Description : What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant ... the same as the approved one d) Change the electrode for the correct type and continue welding
Last Answer : b) Report the incident and record all relevant information