Total Air Temperature is: a. The maximum temperature attainable by the air when brought to rest, adiabatically b. The temperature indicated on the air temperature thermometer plus the ram rise c. The static air temperature minus the recovery factor d. The recovery factor plus the ram rise

Total Air Temperature is:
a. The maximum temperature attainable by the air when brought to rest,
adiabatically
b. The temperature indicated on the air temperature thermometer plus the ram rise
c. The static air temperature minus the recovery factor
d. The recovery factor plus the ram rise
by

1 Answer

Answer :

a. The maximum temperature attainable by the air when brought to rest,
adiabatically
by

Related questions

Total Air Temperature is: a. The maximum temperature attainable by the air when brought to rest, adiabatically b. The temperature indicated on the air temperature thermometer plus the ram rise c. The static air temperature minus the recovery factor d. The recovery factor plus the ram rise

Description : Total Air Temperature is: a. The maximum temperature attainable by the air when brought to rest, adiabatically b. The temperature indicated on the air temperature thermometer plus the ram rise c. The static air temperature minus the recovery factor d. The recovery factor plus the ram rise

Last Answer : a. The maximum temperature attainable by the air when brought to rest, adiabatically

A controlled flight is required to inform the concerned ATC unit when the average TAS at cruising level deviates or is expected to deviate compared to that given TAS in the Flight Plan by at least plus or minus: a. 10% b. 3% c. 5% d. 2%

Description : A controlled flight is required to inform the concerned ATC unit when the average TAS at cruising level deviates or is expected to deviate compared to that given TAS in the Flight Plan by at least plus or minus: a. 10% b. 3% c. 5% d. 2%

Last Answer : d. 2%

If a CSD overheat warning is shown: a. The CSD can be disconnected and the pilot must control the alternator himself b. The pilot must throttle back to reduce the load on the alternator c. The CSD can be disconnected then reconnected later when the temperature has reduced d. The CSD can be disconnected but not used for the rest of the flight

Description : If a CSD overheat warning is shown: a. The CSD can be disconnected and the pilot must control the alternator himself b. The pilot must throttle back to reduce the load on the alternator c. The ... temperature has reduced d. The CSD can be disconnected but not used for the rest of the flight

Last Answer : d. The CSD can be disconnected but not used for the rest of the flight

TAFs are usually valid for: a. For the period indicated in the TAF itself b. For 18 hours c. For 24 hours d. For 8 hours

Description : TAFs are usually valid for:  a. For the period indicated in the TAF itself  b. For 18 hours  c. For 24 hours  d. For 8 hours

Last Answer : a. For the period indicated in the TAF itself

For a flight plan filed before flight, the indicated time of departure is:

Description : For a flight plan filed before flight, the indicated time of departure is:

Last Answer : the estimated off-block time

An aircraft is flying at constant indicated altitude over a warm airmass. The altimeter reading will be: a. Correct b. Greater than the real altitude c. Less than the real altitude d. Oscillating around the correct altitude

Description : An aircraft is flying at constant indicated altitude over a warm airmass. The altimeter reading will be: a. Correct b. Greater than the real altitude c. Less than the real altitude d. Oscillating around the correct altitude

Last Answer : c. Less than the real altitude

Wet-bulb temperature is: a. The temperature indicated by a thermometer whose bulb covered by a water-wetted wick and exposed to a rapidly moving stream of air b. The same as the dry-bulb temperature if the relative humidity is less than 100% c. The dew point temperature d. Always less than the dry-bulb temperature e. Not required to find the relative humidity

Description : Wet-bulb temperature is: a. The temperature indicated by a thermometer whose bulb covered by a water-wetted wick and exposed to a rapidly moving stream of air b. The same as the dry-bulb ... point temperature d. Always less than the dry-bulb temperature e. Not required to find the relative humidity

Last Answer : Answer: A

Which of the following instruments require inputs of both pitot and static pressure? a. Airspeed indicator, machmeter and vertical speed indicator b. Airspeed indicator, vertical speed indicator, altimeter c. Airspeed indicator only d. Airspeed indicator and machmeter

Description : Which of the following instruments require inputs of both pitot and static pressure? a. Airspeed indicator, machmeter and vertical speed indicator b. Airspeed indicator, vertical speed indicator, altimeter c. Airspeed indicator only d. Airspeed indicator and machmeter

Last Answer : d. Airspeed indicator and machmeter

You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Description : You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Last Answer : a. Remain approximately constant

Define the useful load: a. traffic load plus dry operating mass b. traffic load plus usable fuel mass c. dry operating mass plus usable fuel load d. that part of the traffic load which generates revenue

Description : Define the useful load: a. traffic load plus dry operating mass b. traffic load plus usable fuel mass c. dry operating mass plus usable fuel load d. that part of the traffic load which generates revenue

Last Answer : a. traffic load plus dry operating mass

How would you characterize an air temperature of -55*C at the 200HPA level over western Europe?

Description : How would you characterize an air temperature of -55*C at the 200HPA level over western Europe?

Last Answer : WITH IN + 5*C OF ISA

The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Description : The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Last Answer : c. To assist the pilot to adjust the fuel mixture

When an exothermic reversible reaction is conducted adiabatically, the rate of reaction (A) Continuously increases (B) Continuously decreases (C) Passes through a maximum (D) Passes through a minimum

Description : When an exothermic reversible reaction is conducted adiabatically, the rate of reaction (A) Continuously increases (B) Continuously decreases (C) Passes through a maximum (D) Passes through a minimum

Last Answer : (C) Passes through a maximum

A gas performs the maximum work, when it expands (A) Non-uniformly (B) Adiabatically (C) Isobarically (D) Isothermally

Description : A gas performs the maximum work, when it expands (A) Non-uniformly (B) Adiabatically (C) Isobarically (D) Isothermally

Last Answer : (C) Isobarically

In reciprocating compressors, one should aim at compressing the air A. Adiabatically B. Isentropically C. Isothermally D. Polytropically

Description : In reciprocating compressors, one should aim at compressing the air A. Adiabatically B. Isentropically C. Isothermally D. Polytropically

Last Answer : ANSWER : C

If a solid is compressed adiabatically in its elastic range, its __________ remains constant (A) Internal energy (B) Enthalpy (C) Entropy (D) Temperature

Description : If a solid is compressed adiabatically in its elastic range, its __________ remains constant (A) Internal energy (B) Enthalpy (C) Entropy (D) Temperature

Last Answer : (C) Entropy

Which of the following events is heat exchange involved?  a. when there is a phase change  b. when there is a chemical reaction  c. when the gas expands adiabatically  d. when there is difference in temperature

Description : Which of the following events is heat exchange involved?  a. when there is a phase change  b. when there is a chemical reaction  c. when the gas expands adiabatically  d. when there is difference in temperature

Last Answer : when the gas expands adiabatically

Birmingham EGBB/BHX SA0850 280850 18014KT 9999 SCT 024 BKN030 BKN045 12/08 Q1011= FC0600 280600Z 280816 190015G27KT 9999 BKN025 TEMPO 0812 5000 – DZ BKN012 BECMG 1214 19022G37= FT0400 280434Z 281212 19022G37 9999BKN025 TEMPO 1902 5000 RA BKN010 BECMG 2201 25007KT Refer to the weather information for Birmingham, above. What is the total time for which the weather is forcast?

Description : Birmingham EGBB/BHX SA0850 280850 18014KT 9999 SCT 024 BKN030 BKN045 12/08 Q1011= FC0600 280600Z 280816 190015G27KT 9999 BKN025 TEMPO 0812 5000 - DZ BKN012 BECMG 1214 19022G37= FT0400 280434Z 281212 ... information for Birmingham, above. What is the total time for which the weather is forcast?

Last Answer : 28 hours

BIRMINGHAM EGBB/BHX SA0850 280850 18014kt 9999 SCT024 BKN030 BKN045 12/08 Q1011 = FC0600 280600Z 280816 190015G27kt 9999 BKN025 TEMPO 0812 5000 – DZ BKN012 BECMG 1214 19022G37 = FT0400 280434Z 281212 19022G37 9999 BKN025 TEMPO 1902 5000 RA BKN010 BECMG 2201 25007kt Refer to weather information for Birmingham above. What is the total time for which the weather is forecast? a. 9 hours b. 18 hours c. 24 hours d. 28 hours

Description : BIRMINGHAM EGBB/BHX SA0850 280850 18014kt 9999 SCT024 BKN030 BKN045 12/08 Q1011 = FC0600 280600Z 280816 190015G27kt 9999 BKN025 TEMPO 0812 5000 - DZ BKN012 BECMG 1214 19022G37 = FT0400 280434Z 281212 19022G37 9999 ... weather is forecast? a. 9 hours b. 18 hours c. 24 hours d. 28 hours

Last Answer : d. 28 hours

What is the Total Elapsed Time on a VFR flight plan? a. From take-off to overhead destination b. From take-off to overhead destination + 15 mins c. From take-off to landing d. From taxi to arrival on the gate

Description : What is the Total Elapsed Time on a VFR flight plan? a. From take-off to overhead destination b. From take-off to overhead destination + 15 mins c. From take-off to landing d. From taxi to arrival on the gate

Last Answer : a. From take-off to overhead destination

By which of the following methods the temperature rise of windings and other parts may be determined ? (a) Thermometer method (6) Resistance method (c) Embedded temperature detector method (d) Any of the above

Description : By which of the following methods the temperature rise of windings and other parts may be determined ? (a) Thermometer method (6) Resistance method (c) Embedded temperature detector method (d) Any of the above

Last Answer : (d) Any of the above

If the temperature of the atmosphere rose 50 degr on a Fahrenheit thermometer, the rise on a Celsius thermometer would have been: w) 90 degrees x) 82.3 degrees y) 50.3 degrees z) 27.8 degrees

Description : If the temperature of the atmosphere rose 50 degr on a Fahrenheit thermometer, the rise on a Celsius thermometer would have been: w) 90 degrees x) 82.3 degrees y) 50.3 degrees z) 27.8 degrees

Last Answer : ANSWER: Z -- 27.8 DEGREES

A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an inversion is reported at 300 feet with turbulence and wind shear. The wind just above the inversion is 090/30. What is the safest departure procedure? a. Take-off is not possible under these conditions b. Depart on runway 09 with a tailwind c. Depart runway 27 with maximum throttle during the passage through the inversion d. Depart runway 27 with as steep an ascent as possible

Description : A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an  inversion is reported at 300 feet with turbulence and wind shear. The wind just above the  ... throttle during the passage through the inversion  d. Depart runway 27 with as steep an ascent as possible

Last Answer : b. Depart on runway 09 with a tailwind

A pilot can improve the probability of detecting other aircrafts by: a. Minimizing the duration of eye rests and making as many eye movements as possible b. Moving the head frequently to alter the apparent motion of any distant object c. Maximizing the time spent looking in each sector to allow the maximum chance of detecting movement d. Maintaining as far as possible a lookout ahead of the aircraft and relying on peripheral vision to detect any movement from the side

Description : A pilot can improve the probability of detecting other aircrafts by: a. Minimizing the duration of eye rests and making as many eye movements as possible b. Moving the head frequently to ... lookout ahead of the aircraft and relying on peripheral vision to detect any movement from the side

Last Answer : a. Minimizing the duration of eye rests and making as many eye movements as possible

The maximum induced drag occurs at a speed of :

Description : The maximum induced drag occurs at a speed of :

Last Answer : VSO

Maximum Endurance:

Description : Maximum Endurance:

Last Answer : can be achieved in level unaccelerated flight with minimum fuel consumption

The maximum induced drag occurs at a speed of: a. VMD b. VMP c. VSO d. VATO

Description : The maximum induced drag occurs at a speed of: a. VMD b. VMP c. VSO d. VATO

Last Answer : c. VSO

Maximum endurance: a. Can be achieved in level unaccelerated flight with minimum fuel consumption b. Can be achieved by flying at the best rate of climb speed in straight and level flight c. Can be achieved in a steady climb d. Can be achieved by flying at the absolute ceiling

Description : Maximum endurance: a. Can be achieved in level unaccelerated flight with minimum fuel consumption b. Can be achieved by flying at the best rate of climb speed in straight and level flight c. Can be achieved in a steady climb d. Can be achieved by flying at the absolute ceiling

Last Answer : a. Can be achieved in level unaccelerated flight with minimum fuel consumption

Maximum Differential pressure: a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure b. Is the absolute pressure provided by the vacuum pump c. Is the pressure loss over a given time limit d. Is the absolute pressure the cabin pressure ducting is designed to carry

Description : Maximum Differential pressure: a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure b. Is the absolute pressure provided by the vacuum ... time limit d. Is the absolute pressure the cabin pressure ducting is designed to carry

Last Answer : a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure

In reversible non-competitive enzyme activity inhibition (A) Inhibitor bears structural resemblance to substrate (B) Inhibitor lowers the maximum velocity attainable with a given amount of enzyme (C) Km is increased (D) Km is decreased

Description : In reversible non-competitive enzyme activity inhibition (A) Inhibitor bears structural resemblance to substrate (B) Inhibitor lowers the maximum velocity attainable with a given amount of enzyme (C) Km is increased (D) Km is decreased

Last Answer : Answer : B

74. The maximum work attainable as the system comes in equilibrium with surrounding is called a) Energy b) Availability c) Exergy d) Entropy

Description : 74. The maximum work attainable as the system comes in equilibrium with surrounding is called a) Energy b) Availability c) Exergy d) Entropy

Last Answer : Availability

For heat engine operating between two temperatures (T1>T2), what is the maximum efficiency attainable?  A. Eff = 1 – (T2/T1)  B. Eff = 1 - (T1/T2)  C. Eff = T1 - T2  D. Eff = 1 - (T2/T1)^2

Description : For heat engine operating between two temperatures (T1>T2), what is the maximum efficiency attainable?  A. Eff = 1 – (T2/T1)  B. Eff = 1 - (T1/T2)  C. Eff = T1 - T2  D. Eff = 1 - (T2/T1)^2

Last Answer : Eff = 1 – (T2/T1)

How do ypu factor X squared minus 13x plus 12?

Description : How do ypu factor X squared minus 13x plus 12?

Last Answer : It is x^2 -13x +12 = (x-1)(x-12) when factored

How do ypu factor X squared minus 13x plus 12?

Description : How do ypu factor X squared minus 13x plus 12?

Last Answer : It is x^2 -13x +12 = (x-1)(x-12) when factored

In an area of converging air a. Clouds cannot be formed b. Clouds can be formed c. Convective clouds can be dissolved d. Stratified clouds can be dissolved

Description : In an area of converging air  a. Clouds cannot be formed  b. Clouds can be formed  c. Convective clouds can be dissolved  d. Stratified clouds can be dissolved

Last Answer : b. Clouds can be formed

In which zone of a jetstream is the strongest CAT to be expected? a. The warm air side of the core b. Exactly in the center of the core c. About 12,000ft above the core d. The cold air side of the core

Description : In which zone of a jetstream is the strongest CAT to be expected?  a. The warm air side of the core  b. Exactly in the center of the core  c. About 12,000ft above the core  d. The cold air side of the core

Last Answer : d. The cold air side of the core

How does a pilot react to heavy freezing rain at 2,000ft/AGL, when he is unable to deice nor land? a. He ascends to the cold air layer above b. He continues to fly at the same altitude c. He turns back before the aircraft loses maneuverability d. He descends to the warm air layer below

Description : How does a pilot react to heavy freezing rain at 2,000ft/AGL, when he is unable to deice nor  land?  a. He ascends to the cold air layer above  b. He continues to fly at the same altitude  c. He turns back before the aircraft loses maneuverability  d. He descends to the warm air layer below

Last Answer : c. He turns back before the aircraft loses maneuverability 

Where do you find the majority of the air within the atmosphere? a. Troposphere b. Stratosphere c. Tropopause d. Mesosphere

Description : Where do you find the majority of the air within the atmosphere? a. Troposphere b. Stratosphere c. Tropopause d. Mesosphere

Last Answer : a. Troposphere

In flight, it is possible to: i. File an IFR flight plan ii. Modify an active flight plan iii. Cancel a VFR flight plan iv. Close a VFR flight plan (rules of the air ann2 3.3.5) a. i and ii b. i, ii, iii and iv c. ii, iii and iv d. i and iv

Description : In flight, it is possible to: i. File an IFR flight plan ii. Modify an active flight plan iii. Cancel a VFR flight plan iv. Close a VFR flight plan (rules of the air ann2 3.3.5) a. i and ii b. i, ii, iii and iv c. ii, iii and iv d. i and iv

Last Answer : b. i, ii, iii and iv

How many hours in advance of departure time should a flight plan be filed in the case of flights into areas subject to air traffic flow management (ATFM)? a. 3.00 hrs b. 0.30 hrs c. 1.00 hr d. 0.10 hr

Description : How many hours in advance of departure time should a flight plan be filed in the case of flights into areas subject to air traffic flow management (ATFM)? a. 3.00 hrs b. 0.30 hrs c. 1.00 hr d. 0.10 hr

Last Answer : a. 3.00 hrs

With air in the hydraulic system you would

Description : With air in the hydraulic system you would

Last Answer : B. bleed the air out of the system

The purpose of an accumulator is to: a. Relieve excess pressure b. Store fluid under pressure c. Store compressed gas for tyre inflation d. Remove air from the system

Description : The purpose of an accumulator is to: a. Relieve excess pressure b. Store fluid under pressure c. Store compressed gas for tyre inflation d. Remove air from the system

Last Answer : b. Store fluid under pressure

A hand pump is usually fitted: a. For ground servicing purposes b. Lowering the landing gear in an emergency c. Pressurising the oleo struts in the air d. Retracting the gear after take-off

Description : A hand pump is usually fitted: a. For ground servicing purposes b. Lowering the landing gear in an emergency c. Pressurising the oleo struts in the air d. Retracting the gear after take-off

Last Answer : a. For ground servicing purposes

With air in the hydraulic system, you would: a. Ignore it because normal operation would remove it b. Bleed the air out of the system c. Allow the accumulator to auto

Description : With air in the hydraulic system, you would: a. Ignore it because normal operation would remove it b. Bleed the air out of the system c. Allow the accumulator to auto

Last Answer : b. Bleed the air out of the system

With a gas turbine engine, engine anti-icing should be selected ‘ON’: a. Whenever the igniters are on b. Whenever the IOAT is +10°C or below and the air contains visible moisture c. Whenever the TOAT is +10°C or below and it is raining d. Whenever the ice detector system warning light comes on

Description : With a gas turbine engine, engine anti-icing should be selected ‘ON’: a. Whenever the igniters are on b. Whenever the IOAT is +10°C or below and the air contains visible moisture c. Whenever the TOAT is +10°C or below and it is raining d. Whenever the ice detector system warning light comes on

Last Answer : b. Whenever the IOAT is +10°C or below and the air contains visible moisture

For the most Static RAM the maximum access time is about a) 1ns b) 10ns c) 100ns d) 1μs

Description : For the most Static RAM the maximum access time is about a) 1ns b) 10ns c) 100ns d) 1μs

Last Answer : b) 10ns

If you are flying at FL300 in an airmass that is 15*C warmer than a standard atmosphere, what is the outside temperature likely to be?

Description :  If you are flying at FL300 in an airmass that is 15*C warmer than a standard atmosphere, what is the  outside temperature likely to be?

Last Answer : 30*C

The greater the pressure gradient the: a. Closer the isobars and the lower the temperatures b. Further the isobars will be apart and the higher the temperature c. Closer the isobars and the stronger the wind

Description : The greater the pressure gradient the:  a. Closer the isobars and the lower the temperatures  b. Further the isobars will be apart and the higher the temperature  c. Closer the isobars and the stronger the wind

Last Answer : c. Closer the isobars and the stronger the wind

Which of the following statements is an interpretation of the METAR? 00000KT 0200 R14/0800U R16/P1500U FZFG VV001 m03/m03 Q1022 BECMG 0800 = a. Meteorological visibility 200m, RVR for runway 16 1500m, temperature -3°C, vertical visibility 100m b. Meteorological visibility 200ft, RVR for runway 16 more than 1500m, vertical visibility 100ft, fog with hoar frost c. Meteorological visibility for runway 14 800m, fog with hoar frost, RVR for runway 16 more than 1500m d. RVR for runway 14 800m, vertical visibility 100ft, calm, meteorological visibility improving to 800m in the next 2 hours

Description : Which of the following statements is an interpretation of the METAR?   00000KT 0200 R14/0800U R16/P1500U FZFG VV001 m03/m03 Q1022 BECMG 0800 =  a. Meteorological visibility 200m, RVR for ... 800m, vertical visibility 100ft, calm, meteorological visibility  improving to 800m in the next 2 hours

Last Answer : d. RVR for runway 14 800m, vertical visibility 100ft, calm, meteorological visibility  improving to 800m in the next 2 hours