The standard I/O is also called: a. Isolated I/O b. Parallel I/O c. both a and b d. none of these

The standard I/O is also called:
a. Isolated I/O
b. Parallel I/O
c. both a and b
d. none of these
by

1 Answer

Answer :

a. Isolated I/O
by

Related questions

standard I/O uses which control pin on the micro processor: a. IO/M

Description : standard I/O uses which control pin on the micro processor: a. IO/M

Last Answer : a. IO/M

In latest generation computers, the instructions are executed a. Parallel only b. Sequentially only c. Both sequentially and parallel d. All of above

Description : In latest generation computers, the instructions are executed a. Parallel only b. Sequentially only c. Both sequentially and parallel d. All of above

Last Answer : c. Both sequentially and parallel

Which bus plays a crucial role in I/O: a. System bus b. Control bus c. Address bus d. Both A and B

Description : Which bus plays a crucial role in I/O: a. System bus b. Control bus c. Address bus d. Both A and B

Last Answer : b. Control bus

Different components on the motherboard of a PC processor unit are linked together by sets or parallel electrical conducting lines. What are these lines called? a. Conductors b. Buses c. Connectors d. Connectively

Description : Different components on the motherboard of a PC processor unit are linked together by sets or parallel electrical conducting lines. What are these lines called? a. Conductors b. Buses c. Connectors d. Connectively

Last Answer : b. Buses

The most commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called a. ASCII b. EBCDIC c. BCD d. All of above

Description : The most commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called a. ASCII b. EBCDIC c. BCD d. All of above

Last Answer : a. ASCII

______ input is available, so that another coprocessor can be connected and function in _________ with the 8087. . a) RQ/GT0, parallel b) RQ/GT1, parallel c) QS1 & QS0, parallel d) S0 & S1, parallel.

Description : ______ input is available, so that another coprocessor can be connected and function in _________ with the 8087. . a) RQ/GT0, parallel b) RQ/GT1, parallel c) QS1 & QS0, parallel d) S0 & S1, parallel.

Last Answer : a) RQ/GT0, parallel

Why 8087 is referred to as Coprocessor? i) Because 8087 is used in parallel with main processor in a system, rather than serving as a main processor itself. ii) Because 8087 is used in serial with main processor in a system, rather than serving as a main processor itself. iii) Because main Microprocessor handles the general program execution and the 8087 handles specialized math computations. a) i & iii b) ii & iii c) iii only. d) i only.

Description : Why 8087 is referred to as Coprocessor? i) Because 8087 is used in parallel with main processor in a system, rather than serving as a main processor itself. ii) Because 8087 is used in serial with main processor in a ... math computations. a) i & iii b) ii & iii c) iii only. d) i only.

Last Answer : c) iii only.

The coprocessors operate in ______ with a processor on the same buses and with the same instruction _______. a) Parallel, byte stream. b) Series, byte stream. c) Series, bite stream d) Parallel, bite stream.

Description : The coprocessors operate in ______ with a processor on the same buses and with the same instruction _______. a) Parallel, byte stream. b) Series, byte stream. c) Series, bite stream d) Parallel, bite stream.

Last Answer : a) Parallel, byte stream.

ASCII stands for a. American Stable Code for International Interchange b. American Standard Case for Institutional Interchange c. American Standard Code for Information Interchange d. American Standard Code for Interchange Information

Description : ASCII stands for a. American Stable Code for International Interchange b. American Standard Case for Institutional Interchange c. American Standard Code for Information Interchange d. American Standard Code for Interchange Information

Last Answer : c. American Standard Code for Information Interchange

Fifth generation computer is also known as a. Knowledge information processing system b. Very large scale integration (VLSI) c. Both of above d. None of above

Description : Fifth generation computer is also known as a. Knowledge information processing system b. Very large scale integration (VLSI) c. Both of above d. None of above

Last Answer : a. Knowledge information processing system

Secondary memory is also called____: a. Auxiliary b. Backup store c. Both A and B d. None of these

Description : Secondary memory is also called____: a. Auxiliary b. Backup store c. Both A and B d. None of these

Last Answer : c. Both A and B

Explain the purpose of the I/O instructions IN and OUT.

Description : Explain the purpose of the I/O instructions IN and OUT.

Last Answer : The IN instruction is used to move data from an I/O port into the accumulator. The OUT instruction is used to move data from the accumulator to an I/O port. The IN & OUT instructions are used only on microprocessor, which use a separate address space for interfacing.

The organization of I/O devices create a difference between _____: a. Digital computer b. Micro computer c. A and B d. None of these

Description : The organization of I/O devices create a difference between _____: a. Digital computer b. Micro computer c. A and B d. None of these

Last Answer : c. A and B

Which system communicates with the outside word via the I/O devices interfaced to it: a. Microprocessor b. Microcomputer c. Digital computer d. All of these

Description : Which system communicates with the outside word via the I/O devices interfaced to it: a. Microprocessor b. Microcomputer c. Digital computer d. All of these

Last Answer : b. Microcomputer

Interrupts which are initiated by an I/O drive are a. internal b. external c. software d. all of above

Description : Interrupts which are initiated by an I/O drive are a. internal b. external c. software d. all of above

Last Answer : b. external

.In an 8085 based system, the maximum number of input output devices can be connectedusing I/0 mapped I/O method isa) 64 b) 512 c) 256 d) 65536

Description : .In an 8085 based system, the maximum number of input output devices can be connectedusing I/0 mapped I/O method isa) 64 b) 512 c) 256 d) 65536

Last Answer : b) 512

The necessary steps carried out to perform the operation of accessing either memory or I/O Device, constitute a ___________________ a) fetch operation b) execute operation c) machine cycle

Description : The necessary steps carried out to perform the operation of accessing either memory or I/O Device, constitute a ___________________ a) fetch operation b) execute operation c) machine cycle

Last Answer : c) machine cycle

In 8086 microprocessor one of the following statements is not true.a)Coprocessor is interfaced in MAX mode b)Coprocessor is interfaced in MIN mode c)I/O can be interfaced in MAX / MIN moded)Supports pipelining

Description : In 8086 microprocessor one of the following statements is not true.a)Coprocessor is interfaced in MAX mode b)Coprocessor is interfaced in MIN mode c)I/O can be interfaced in MAX / MIN moded)Supports pipelining

Last Answer : b)Coprocessor is interfaced in MIN mode

One of the main feature that distinguish microprocessors from micro-computers is a. Words are usually larger in microprocessors b. Words are shorter in microprocessors c. Microprocessor does not contain I/O devices d. Exactly the same as the machine cycle time

Description : One of the main feature that distinguish microprocessors from micro-computers is a. Words are usually larger in microprocessors b. Words are shorter in microprocessors c. Microprocessor does not contain I/O devices d. Exactly the same as the machine cycle time

Last Answer : c. Microprocessor does not contain I/O devices

Offline device is a. A device which is not connected to CPU b. A device which is connected to CPU c. A direct access storage device d. An I/O device

Description : Offline device is a. A device which is not connected to CPU b. A device which is connected to CPU c. A direct access storage device d. An I/O device

Last Answer : a. A device which is not connected to CPU

Interface electronic circuit is used to interconnect I/O devices to a computer’s CPU or a. ALU b. Memory c. Buffer d. Register

Description : Interface electronic circuit is used to interconnect I/O devices to a computer’s CPU or a. ALU b. Memory c. Buffer d. Register

Last Answer : b. Memory

Offline device is a. A device which is not connected to CPU b. A device which is connected to CPU c. A direct access storage device d. An I/O device

Description : Offline device is a. A device which is not connected to CPU b. A device which is connected to CPU c. A direct access storage device d. An I/O device

Last Answer : a. A device which is not connected to CPU

How many ways of transferring data between the microprocessor and a physical I/O device: a. 2 b. 3 c. 4 d. 5

Description : How many ways of transferring data between the microprocessor and a physical I/O device: a. 2 b. 3 c. 4 d. 5

Last Answer : b. 3

How bit microprocessor inexpensive a separate interface is provided with I/O device: a. 2 bit b. 4 bit c. 8 bit d. 32 bit

Description : How bit microprocessor inexpensive a separate interface is provided with I/O device: a. 2 bit b. 4 bit c. 8 bit d. 32 bit

Last Answer : c. 8 bit

When memory write or I/O read are active data is from the processor: a. Input b. Output c. Processor d. None of these

Description : When memory write or I/O read are active data is from the processor: a. Input b. Output c. Processor d. None of these

Last Answer : b. Output

When memory read or I/O read are active data is to the processor : a. Input b. Output c. Processor d. None of these

Description : When memory read or I/O read are active data is to the processor : a. Input b. Output c. Processor d. None of these

Last Answer : a. Input

8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Description : 8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Last Answer : c) 4, i,ii,iii

8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register to register c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Description : 8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register ... c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Last Answer : c) 232 byte, five 8bit, register to register

In 8255, under the I/O mode of operation we have __ modes. Under which mode will have the following features i) A 5 bit control port is available. ii) Three I/O lines are available at Port C. a) 3, Mode2 b) 2, Mode 2 c) 4, Mode 3 d) 3, Mode 2

Description : In 8255, under the I/O mode of operation we have __ modes. Under which mode will have the following features i) A 5 bit control port is available. ii) Three I/O lines are available at Port C. a) 3, Mode2 b) 2, Mode 2 c) 4, Mode 3 d) 3, Mode 2

Last Answer : a) 3, Mode2

8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Description : 8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Last Answer : c) 4, i,ii,iii

8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register to register c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Description : 8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, ... c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Last Answer : d) 232 byte, six 8 bit, register to register

In 8086 microprocessor one of the following statements is not true. a) Coprocessor is interfaced in MAX mode b) Coprocessor is interfaced in MIN mode c) I/O can be interfaced in MAX / MIN mode

Description : In 8086 microprocessor one of the following statements is not true. a) Coprocessor is interfaced in MAX mode b) Coprocessor is interfaced in MIN mode c) I/O can be interfaced in MAX / MIN mode

Last Answer : b) Coprocessor is interfaced in MIN mode

BHE of 8086 microprocessor signal is used to interface the a) Even bank memory b) Odd bank memory c) I/O d) DMA

Description : BHE of 8086 microprocessor signal is used to interface the a) Even bank memory b) Odd bank memory c) I/O d) DMA

Last Answer : b) Odd bank memory

The advantage of memory mapped I/O over I/O mapped I/O is, a) Faster b) Many instructions supporting memory mapped I/O c) Require a bigger address decoder d) All the above

Description : The advantage of memory mapped I/O over I/O mapped I/O is, a) Faster b) Many instructions supporting memory mapped I/O c) Require a bigger address decoder d) All the above

Last Answer : d) All the above

The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Description : The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Last Answer : The microprocessor can read/write 16 bit data from or to memory 

Floppy disks which are made from flexible plastic material are also called? a. Hard disks b. High-density disks c. Diskettes d. Templates

Description : Floppy disks which are made from flexible plastic material are also called? a. Hard disks b. High-density disks c. Diskettes d. Templates

Last Answer : c. Diskettes

High level language is also called a. Problem oriented language b. Business oriented language c. Mathematically oriented language d. All of the above

Description : High level language is also called a. Problem oriented language b. Business oriented language c. Mathematically oriented language d. All of the above

Last Answer : d. All of the above

The status register is also called the____: a. Condition code register b. Flag register c. A and B d. None of these

Description : The status register is also called the____: a. Condition code register b. Flag register c. A and B d. None of these

Last Answer : c. A and B

BURST refresh in DRAM is also called as a) Concentrated refresh b) distributed refresh c) Hidden refresh d) none

Description : BURST refresh in DRAM is also called as a) Concentrated refresh b) distributed refresh c) Hidden refresh d) none

Last Answer : b) distributed refresh

Pick out the wrong statement about a streamline. (A) It is always parallel to the main direction of the fluid flow (B) It is a line across which there is no flow and it is equivalent to a rigid boundary(C) Streamlines intersect at isolated point of zero velocity and infinitevelocity(D) The fluid lying between any two streamlines can be considered to be inisolation and the streamline spacing varies inversely as the velocity

Description : Pick out the wrong statement about a streamline. (A) It is always parallel to the main direction of the fluid flow (B) It is a line across which there is no flow and it is ... any two streamlines can be considered to be in isolation and the streamline spacing varies inversely as the velocity

Last Answer : (A) It is always parallel to the main direction of the fluid flow

Which of the following is characteristic feature of Le Fort II fracture Options: 1) The fracture line runs through the root of the nose, lacrimal bone, floor of orbit, upper part of maxillary sinus and pterygoid plates 2) The fracture line runs above and parallel to the palate and crosses lower part of nasal septum, maxillary antra and the pterygoid plates 3) Complete separation of the facial bones from the cranial bones 4) Isolated fracture of orbital floor

Description : Which of the following is characteristic feature of Le Fort II fracture Options: 1) The fracture line runs through the root of the nose, lacrimal bone, floor of orbit, upper part of maxillary ... ) Complete separation of the facial bones from the cranial bones 4) Isolated fracture of orbital floor

Last Answer : Correct Answer: 1) The fracture line runs through the root of the nose, lacrimal bone, floor of orbit, upper part of maxillary sinus and pterygoid plates

………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Description : ………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Last Answer : C. SLIP, PPP

An ASCII is a character-encoding scheme that is employed by personal computers in order to represent various characters, numbers and control keys that the computer user selects on the keyboard. ASCII is an acronym for (A) American Standard Code for Information Interchange (B) American Standard Code for Intelligent Information (C) American Standard Code for Information Integrity (D) American Standard Code for Isolated Information

Description : An ASCII is a character-encoding scheme that is employed by personal computers in order to represent various characters, numbers and control keys that the computer user selects on the ... C) American Standard Code for Information Integrity (D) American Standard Code for Isolated Information

Last Answer : (A) American Standard Code for Information Interchange

Which of the following is called low level languages? a. Machine language b. Assembly language c. Both of the above d. None of above

Description : Which of the following is called low level languages? a. Machine language b. Assembly language c. Both of the above d. None of above

Last Answer : c. Both of the above

The computer that process both analog and digital is called a. Analog computer b. Digital computer c. Hybrid computer d. Mainframe computer

Description : The computer that process both analog and digital is called a. Analog computer b. Digital computer c. Hybrid computer d. Mainframe computer

Last Answer : c. Hybrid computer

The external device is connected to a pin called the ______ pin on the processor chip. a. Interrupt b. Transfer c. Both d. None of these

Description : The external device is connected to a pin called the ______ pin on the processor chip. a. Interrupt b. Transfer c. Both d. None of these

Last Answer : a. Interrupt

Causing a flag to became 0 is called: a. Clearing a flag b. Case a flag c. Both a and b d. None of these

Description : Causing a flag to became 0 is called: a. Clearing a flag b. Case a flag c. Both a and b d. None of these

Last Answer : a. Clearing a flag

Open system is also known as _________.  a. isolated system  b. closed container  c. control mass  d. control volume

Description : Open system is also known as _________.  a. isolated system  b. closed container  c. control mass  d. control volume

Last Answer : control volume

A closed system is also known as _________.  a. isolated system  b. closed container  c. control mass  d. control volume

Description : A closed system is also known as _________.  a. isolated system  b. closed container  c. control mass  d. control volume

Last Answer : control mass