They experimented with light transmission cables through bundle of fibers and lead to the development of flexible fiberscope. ∙ A. Townes, Schawlow and Kao ∙ B. Maiman, Kao and Bockham ∙ C. Maurer, Kapron and Keck ∙ D. Van Heel, Hopkins and Kapany

They experimented with light transmission cables through bundle of fibers and lead to the development of  flexible fiberscope.
∙ A. Townes, Schawlow and Kao
∙ B. Maiman, Kao and Bockham
∙ C. Maurer, Kapron and Keck
∙ D. Van Heel, Hopkins and Kapany
by

1 Answer

Answer :

D. Van Heel, Hopkins and Kapany
by

Related questions

They wrote a paper describing how it was possible to use stimulated emission for amplifying light waves (laser) as well as microwaves (maser). ∙ A. Theodore Maiman ∙ B. KC Kao and GA Bockham ∙ C. Charles Townes and Arthur Schawlow ∙ D. Kapron, Keck and Maurer

Description : They wrote a paper describing how it was possible to use stimulated emission for amplifying light waves (laser) as well as microwaves (maser). ∙ A. Theodore Maiman ∙ B. KC Kao and GA Bockham ∙ C. Charles Townes and Arthur Schawlow ∙ D. Kapron, Keck and Maurer

Last Answer : C. Charles Townes and Arthur Schawlow

They proposed a new communication medium using cladded fiber cables. ∙ A. Kao and Bockham ∙ B. Maiman, Kao and Bockham ∙ C. Kapron, Keck and Maurer ∙ D. Maiman and Schawlow

Description : They proposed a new communication medium using cladded fiber cables. ∙ A. Kao and Bockham ∙ B. Maiman, Kao and Bockham ∙ C. Kapron, Keck and Maurer ∙ D. Maiman and Schawlow

Last Answer : ∙ A. Kao and Bockham

Developed an optical fiber with losses less that 2 dB/km ∙ A. Kao and Bockham ∙ B. Maiman, Kao and Bockham ∙ C. Maiman and Schawlow ∙ D. Kapron, Keck and Maurer

Description : Developed an optical fiber with losses less that 2 dB/km ∙ A. Kao and Bockham ∙ B. Maiman, Kao and Bockham ∙ C. Maiman and Schawlow ∙ D. Kapron, Keck and Maurer

Last Answer : ∙ A. Kao and Bockham

They were granted patents for scanning and transmitting television images through uncoated fiber cables. ∙ A. Baird and Hansel ∙ B. Bockham and Kao ∙ C. Kapron and Keck

Description : They were granted patents for scanning and transmitting television images through uncoated fiber cables. ∙ A. Baird and Hansel ∙ B. Bockham and Kao ∙ C. Kapron and Keck

Last Answer : A. Baird and Hansel

They experimented with light transmission cables through bundle of fibers and lead to the development of flexible fiberscope

Description : They experimented with light transmission cables through bundle of fibers and lead to the development of flexible fiberscope

Last Answer : Van Heel, Hopkins and Kapany

The scientist who built the first optical maser ∙ A. Charles Townes ∙ B. GA Bockham ∙ C. Theodore Maiman ∙ D. ACS Van Heel

Description : The scientist who built the first optical maser ∙ A. Charles Townes ∙ B. GA Bockham ∙ C. Theodore Maiman ∙ D. ACS Van Heel

Last Answer : ∙ C. Theodore Maiman

He coined the term “fiber optics” in 1956. ∙ A. Kapany ∙ B. Kao ∙ C. Bockham ∙ D. Keck

Description : He coined the term “fiber optics” in 1956. ∙ A. Kapany ∙ B. Kao ∙ C. Bockham ∙ D. Keck

Last Answer : ∙ A. Kapany

Proposed the use of clad glass fiber as a dielectric waveguide a. Karpon and Keck b. Karpon and Bockham c. Bockham and Kao d. Kao and Keck

Description : Proposed the use of clad glass fiber as a dielectric waveguide a. Karpon and Keck b. Karpon and Bockham c. Bockham and Kao d. Kao and Keck

Last Answer : c. Bockham and Kao

Developed the first laser a. Charles Townes b. Theodore Maiman c. Gordon McKenzie d. Albert Einstein

Description : Developed the first laser a. Charles Townes b. Theodore Maiman c. Gordon McKenzie d. Albert Einstein

Last Answer : b. Theodore Maiman

Proposed the use of clad glass fiber as a dielectric waveguide a. Karpon and Keck b. Karpon and Bockham c. Bockham and Kao d. Kao and Keck

Description : Proposed the use of clad glass fiber as a dielectric waveguide a. Karpon and Keck b. Karpon and Bockham c. Bockham and Kao d. Kao and Keck

Last Answer : c. Bockham and Kao

Proposed the use of a clad glass fiber as a dielectric waveguide. A. Kao and Keck B. Karpon and Keck C. Karpon and Bockham D. Bockham and Kao

Description : Proposed the use of a clad glass fiber as a dielectric waveguide. A. Kao and Keck B. Karpon and Keck C. Karpon and Bockham D. Bockham and Kao

Last Answer : D. Bockham and Kao

It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Last Answer : B. absorption loss

The term single mode and multimode are best described as ∙ A. a number of fibers placed into fiber-optic cable ∙ B. the number of voice channels each fiber can support ∙ C. the number of wavelengths each fiber can support ∙ D. the index number

Description : The term single mode and multimode are best described as ∙ A. a number of fibers placed into fiber-optic cable ∙ B. the number of voice channels each fiber can support ∙ C. the number of wavelengths each fiber can support ∙ D. the index number

Last Answer : C. the number of wavelengths each fiber can support

Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8

Description : Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8

Last Answer : ∙ a. 5

Splicing fibers means ∙ a. Fusion ∙ b. Butt ∙ c. Glue ∙ d. Both fusion and butt

Description : Splicing fibers means ∙ a. Fusion ∙ b. Butt ∙ c. Glue ∙ d. Both fusion and butt

Last Answer : . Both fusion and butt

The ultrapure glass used to manufacture optical fibers is approximately ___pure ∙ a. 99.9 % ∙ b. 99.99 % ∙ c. 99.999 % ∙ d. 99.9999 %

Description : The ultrapure glass used to manufacture optical fibers is approximately ___pure ∙ a. 99.9 % ∙ b. 99.99 % ∙ c. 99.999 % ∙ d. 99.9999 %

Last Answer : d. 99.9999 %

Who initially gave the idea of laser (without using the acronym)? (a) Gordon Gould (b) Theodore Maiman (c) Albert Einstein (d) Charles Townes

Description : Who initially gave the idea of laser (without using the acronym)? (a) Gordon Gould (b) Theodore Maiman (c) Albert Einstein (d) Charles Townes

Last Answer : Ans:(c)

Developed the first laser a. Charles Townes b. Theodore Maiman c. Gordon McKenzie d. Albert Einstein

Description : Developed the first laser a. Charles Townes b. Theodore Maiman c. Gordon McKenzie d. Albert Einstein

Last Answer : b. Theodore Maiman

Which of the following cables will have the highest launch power capability? ∙ A. 50/125/0.2 ∙ B. 85/125/0.275 ∙ C. 62.5/125/0.275 ∙ D. 100/140/0.3

Description : Which of the following cables will have the highest launch power capability? ∙ A. 50/125/0.2 ∙ B. 85/125/0.275 ∙ C. 62.5/125/0.275 ∙ D. 100/140/0.3

Last Answer : A. 50/125/0.2

Fiber-optic cables with attenuation of 1.8, 3.4, 5.9 and 18 dB are linked together. The total loss is ∙ A. 7.5 dB ∙ B. 19.8 dB ∙ C. 29.1 dB ∙ D. 650 dB

Description : Fiber-optic cables with attenuation of 1.8, 3.4, 5.9 and 18 dB are linked together. The total loss is ∙ A. 7.5 dB ∙ B. 19.8 dB ∙ C. 29.1 dB ∙ D. 650 dB

Last Answer : C. 29.1 dB

Fiber-optic cables with attenuations of 1.8, 3.4, 5.9, and 18 dB are linked together. The total loss is ∙ a. 7.5 dB ∙ b. 19.8 dB ∙ c. 29.1 dB ∙ d. 650 dB

Description : Fiber-optic cables with attenuations of 1.8, 3.4, 5.9, and 18 dB are linked together. The total loss is ∙ a. 7.5 dB ∙ b. 19.8 dB ∙ c. 29.1 dB ∙ d. 650 dB

Last Answer : ∙ c. 29.1 dB

Fiber optic cables operate at frequencies near ∙ a. 20 MHz ∙ b. 200 MHz ∙ c. 2G Hz ∙ d. 800 THz

Description : Fiber optic cables operate at frequencies near ∙ a. 20 MHz ∙ b. 200 MHz ∙ c. 2G Hz ∙ d. 800 THz

Last Answer : ∙ d. 800 THz

An important requirement for successful transmission system using light ∙ a. Powerful, reliable light source ∙ b. Strong glass ∙ c. Reliable, high cost transmission medium ∙ d. Powerful regenerators

Description : An important requirement for successful transmission system using light ∙ a. Powerful, reliable light source ∙ b. Strong glass ∙ c. Reliable, high cost transmission medium ∙ d. Powerful regenerators

Last Answer : a. Powerful, reliable light source

The leakage current that flows through a photodiode with no light input ∙ A. dark voltage ∙ B. dark impedance ∙ C. dark power ∙ D. dark current

Description : The leakage current that flows through a photodiode with no light input ∙ A. dark voltage ∙ B. dark impedance ∙ C. dark power ∙ D. dark current

Last Answer : D. dark current

Coherence of laser light is important for _________ ∙ a. Light propagation ∙ b. Getting laser light to pass through air ∙ c. Drilling holes ∙ d. Holography

Description : Coherence of laser light is important for _________ ∙ a. Light propagation ∙ b. Getting laser light to pass through air ∙ c. Drilling holes ∙ d. Holography

Last Answer : d. Holography

What is used to block light from a laser and let other light through ∙ a. Neutral density ∙ b. Color ∙ c. Interference ∙ d. Spatial

Description : What is used to block light from a laser and let other light through ∙ a. Neutral density ∙ b. Color ∙ c. Interference ∙ d. Spatial

Last Answer : ∙ c. Interference

Optical detectors are square-law devices because they respond to _____ rather than amplitude ∙ a. Intensity ∙ b. Light ∙ c. Density ∙ d. Photon

Description : Optical detectors are square-law devices because they respond to _____ rather than amplitude ∙ a. Intensity ∙ b. Light ∙ c. Density ∙ d. Photon

Last Answer : a. Intensity

Refraction is the ∙ A. bending of light ∙ B. reflection of light waves ∙ C. distortion of light waves ∙ D. diffusion of light waves

Description : Refraction is the ∙ A. bending of light ∙ B. reflection of light waves ∙ C. distortion of light waves ∙ D. diffusion of light waves

Last Answer : A. bending of light

The main benefit of light wave communications over microwaves or any other communications media are ∙ A. lower cost ∙ B. better security ∙ C. wider bandwidth ∙ D. freedom from interface

Description : The main benefit of light wave communications over microwaves or any other communications media are ∙ A. lower cost ∙ B. better security ∙ C. wider bandwidth ∙ D. freedom from interface

Last Answer : C. wider bandwidth

EMD is best described by which statement? ∙ A. 70 percent of the core diameter and 70% of the fiber NA should be filled with light. ∙ B. 70 percent of the fiber diameter and 70% of the cone of acceptance should be filled with light. ∙ C. 70 percent of input light should be measured at the output. ∙ D. 70 percent of the unwanted wavelengths should be attenuated by the fiber.

Description : EMD is best described by which statement? ∙ A. 70 percent of the core diameter and 70% of the fiber NA should be filled with light. ∙ B. 70 percent of the fiber diameter and 70% of the ... be measured at the output. ∙ D. 70 percent of the unwanted wavelengths should be attenuated by the fiber.

Last Answer : 70 percent of the core diameter and 70% of the fiber NA should be filled with light.

The speed of light in plastic compared to the speed of light in air is ∙ A. less ∙ B. more ∙ C. the same ∙ D. zero

Description : The speed of light in plastic compared to the speed of light in air is ∙ A. less ∙ B. more ∙ C. the same ∙ D. zero

Last Answer : A. less

The upper pulse rate and information-carrying capacity of a cable is limited by ∙ A. pulse shortening ∙ B. attenuation ∙ C. light leakage ∙ D. modal dispersion

Description : The upper pulse rate and information-carrying capacity of a cable is limited by ∙ A. pulse shortening ∙ B. attenuation ∙ C. light leakage ∙ D. modal dispersion

Last Answer : D. modal dispersion

Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? ∙ A. less than ∙ B. greater than ∙ C. equal to ∙ D. zero

Description : Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? ∙ A. less than ∙ B. greater than ∙ C. equal to ∙ D. zero

Last Answer : ∙ B. greater than

A popular light wavelength fiber-optic cable is ∙ A. 0.7 micrometer ∙ B. 1.3 micrometer ∙ C. 1.5 micrometer ∙ D. 1.8 micrometer

Description : A popular light wavelength fiber-optic cable is ∙ A. 0.7 micrometer ∙ B. 1.3 micrometer ∙ C. 1.5 micrometer ∙ D. 1.8 micrometer

Last Answer : B. 1.3 micrometer

The minimum optical power a light detector can receive and still produce a usable electrical output signal. ∙ A. light responsivity ∙ B. light sensitivity ∙ C. light collectivity ∙ D. illumination

Description : The minimum optical power a light detector can receive and still produce a usable electrical output signal. ∙ A. light responsivity ∙ B. light sensitivity ∙ C. light collectivity ∙ D. illumination

Last Answer : B. light sensitivity

The term responsivity as it applies to a light detector is best described as ∙ A. the time required for the signal to go from 10 to 90 percent of maximum amplitude ∙ B. the ratio of the diode output current to the input optical power ∙ C. the ratio of the input power to output power ∙ D. the ratio of output current to input current

Description : The term responsivity as it applies to a light detector is best described as ∙ A. the time required for the signal to go from 10 to 90 percent of maximum amplitude ∙ B. the ratio of the diode ... . the ratio of the input power to output power ∙ D. the ratio of output current to input current

Last Answer : the ratio of the diode output current to the input optical power

The time it takes a light induced carrier travel across the depletion region of the semiconductor. ∙ A. dispersion ∙ B. response time ∙ C. irradiance ∙ D. transit time

Description : The time it takes a light induced carrier travel across the depletion region of the semiconductor. ∙ A. dispersion ∙ B. response time ∙ C. irradiance ∙ D. transit time

Last Answer : D. transit time

A pn-junction diode emits light by spontaneous emission ∙ A. LED ∙ B. APD ∙ C. PIN

Description : A pn-junction diode emits light by spontaneous emission ∙ A. LED ∙ B. APD ∙ C. PIN

Last Answer : A. LED

How can modal dispersion reduced entirely? ∙ A. Use a graded index fiber ∙ B. Use a single-mode fiber ∙ C. Use a monochromatic light source ∙ D. Use a very sensitive light detector

Description : How can modal dispersion reduced entirely? ∙ A. Use a graded index fiber ∙ B. Use a single-mode fiber ∙ C. Use a monochromatic light source ∙ D. Use a very sensitive light detector

Last Answer : Use a single-mode fiber

It is caused by the difference in the propagation time of light rays that take different paths down the fiber. ∙ A. modal dispersion ∙ B. microbending ∙ C. Rayleigh scattering ∙ D. chromatic dispersion

Description : It is caused by the difference in the propagation time of light rays that take different paths down the fiber. ∙ A. modal dispersion ∙ B. microbending ∙ C. Rayleigh scattering ∙ D. chromatic dispersion

Last Answer : A. modal dispersion

As light is coupled in a multiport deflective device, the power is reduced by ∙ A. 1.5 dB ∙ B. 0.1 dB ∙ C. 0.5 dB ∙ D. 0.001 dB

Description : As light is coupled in a multiport deflective device, the power is reduced by ∙ A. 1.5 dB ∙ B. 0.1 dB ∙ C. 0.5 dB ∙ D. 0.001 dB

Last Answer : C. 0.5 dB

Chromatic dispersion can be eliminated by __________. ∙ A. using a monochromatic light source ∙ B. using a very small numerical aperture fiber ∙ C. using a graded-index fiber ∙ D. using a very sensitive photo detector

Description : Chromatic dispersion can be eliminated by __________. ∙ A. using a monochromatic light source ∙ B. using a very small numerical aperture fiber ∙ C. using a graded-index fiber ∙ D. using a very sensitive photo detector

Last Answer : A. using a monochromatic light source

Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion

Description : Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion

Last Answer : D. wavelength dispersion

For a single mode optical cable with 0.25 dB/km loss, determine the optical power 100 km from a 0.1-mW light source. ∙ A. -45 dBm ∙ B. -15 dBm ∙ C. -35 dBm

Description : For a single mode optical cable with 0.25 dB/km loss, determine the optical power 100 km from a 0.1-mW light source. ∙ A. -45 dBm ∙ B. -15 dBm ∙ C. -35 dBm

Last Answer : ∙ C. -35 dBm

It is caused by hydroxide ions in the material ∙ A. visible light absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. ion resonance absorption

Description : It is caused by hydroxide ions in the material ∙ A. visible light absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. ion resonance absorption

Last Answer : D. ion resonance absorption

t is a result of photons of light that are absorbed by the atoms of the glass core molecule. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption

Description : t is a result of photons of light that are absorbed by the atoms of the glass core molecule. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption

Last Answer : B. infrared absorption

It is caused by valence electrons in the silica material from which the fiber are manufactured. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption

Description : It is caused by valence electrons in the silica material from which the fiber are manufactured. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption

Last Answer : ultraviolet absorption

Which of the following is not a factor in cable light loss? ∙ A. reflection ∙ B. absorption ∙ C. scattering ∙ D. dispersion

Description : Which of the following is not a factor in cable light loss? ∙ A. reflection ∙ B. absorption ∙ C. scattering ∙ D. dispersion

Last Answer : A. reflection

Results in reduction in the power of light wave as it travels down the cable. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Description : Results in reduction in the power of light wave as it travels down the cable. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Last Answer : A. power loss

Infrared light has a wavelength that is ∙ A. less than 400 nm ∙ B. more than 700 nm ∙ C. less than 700 nm ∙ D. a little over 400 nm

Description : Infrared light has a wavelength that is ∙ A. less than 400 nm ∙ B. more than 700 nm ∙ C. less than 700 nm ∙ D. a little over 400 nm

Last Answer : B. more than 700 nm