A, what logic element enables FF3 to  toggle with the clock?

1 Answer

Answer :

The AND gate

Related questions

Description : In a positive-edge-triggered JK flip-flop, if J and K both are high then the output will be ............. on the rising edge of the clock. (A) No change (B) Set (C) Reset (D) Toggle

Last Answer : (D) Toggle 

Description : Read the following statements: i. Gate is a combinational logic. ii. JK Flip-flop in toggle mode is not combinational logic. iii. MSJK Flip-flop suffers from race-around. iv. Counters are sequential circuits. Which choice is correct? (A) i, ii (B) i, ii, iv (C) ii, iii, iv (D) i, ii, iii

Last Answer : Read the following statements: i. Gate is a combinational logic. ii. JK Flip-flop in toggle mode is not combinational logic. iii. MSJK Flip-flop suffers from race-around. iv. Counters are sequential circuits. Which choice is ... (A) i, ii (B) i, ii, iv (C) ii, iii, iv (D) i, ii, iii

Description : What signal causes FF2 to toggle?

Last Answer : Q output of FF 1 going LOW.

Description : What logic levels must exist for the FF to be toggled by the clock?

Last Answer : Both J and K must be HIGH.

Description : What characteristic of sound enables a person to distinguish one musical instrument from another, if they are all playing the same note?

Last Answer : Quality.

Description : What basic requirement of a closed-loop system (not present in open-loops) enables present load position to be sensed?

Last Answer : Feedback.

Description : What method for encoding digital data enables you to store more data in less space by limiting the distance between pulses on a hard disk?

Last Answer : Run length-limited (RLL) encoding.

Description : WYSIWYG maker for making expandable blocks (show/ hide toggle blocks)?

Last Answer : Wow. I have no idea, but should identify WYSIWYG as What You See Is What You Get for those who couldn’t figure it out.

Description : What's bugging my simple JavaScript toggle script?

Last Answer : answer:The toggle_visibility function specifies (eng, met), not (var1, var2), so it seems not to matter what order of parameters you send it, it's going to read (eng, met) always. function toggle_visibility(eng, ... = block'; } else { e1.style.display = block'; e2.style.display = none'; }

Description : How do I toggle "block format" text in Word 2007?

Last Answer : Highlight the area to be in Block Text, then click the Block Text icon. Highlight the other text, and then click the format you want.

Description : Toggle between work and home network domain under Win7?

Last Answer : answer:I don't think there's an easy way of toggling back and forth. And getting back on the domain would require admin privileges (some companies don't let the workers have that). I have roughly the same ... of the NAS instead of the name. You should be able to connect to a printer the same way.

Description : How do I toggle between screens on MacBook?

Last Answer : Settings > Displays > then check ‘mirror displays’. Also, if you use a smartboard and are a teacher, I think you’re cool.

Description : Is there an AppleScript method that can toggle miniaturized state of certain windows?

Last Answer : You could try opening the dictionary of commands (cmd + shift + o). This gives you the syntax of every applicable command for every app you have on your machine.

Description : What is a Toggle filter?

Last Answer : Need answer

Description : Central Processing Unit (CPU) of a computer consists of: a) Control and arithmetic logic unit and primary storage b) Control, clock and ROM c) Control, clock and RAM d) Control, ALU, RAM and ROM

Last Answer : Ans: A

Description : How many clock pulses are required to output a 4-bit number in serial form?

Last Answer : Four.

Description : . What type of counter has clock pulses applied to all FFs?

Last Answer : Synchronous.

Description : What type of clock is used when more than one operation is to be completed during one clock cycle?

Last Answer : . A multiphase clock.

Description : What is needed to use a monostable or one-shot multivibrator for a clock circuit?

Last Answer : Triggers.

Description : What is the simplest type of clock circuit?

Last Answer : An astable or free-running multivibrator.

Description : What is a clock with regard to digital equipment?

Last Answer : A timing signal.

Description : What will be the output of Q if J is HIGH, PS and CLR are HIGH, and the clock is going negative?

Last Answer : Set, or HIGH (1).

Description : What type of logic family uses diodes in the input?

Last Answer : DTL (diode transistor logic).

Description : What type of logic gates are added to a parallel adder to enable it to subtract?

Last Answer : X-OR gates.

Description : A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Last Answer : . One or the other of the inputs must be HIGH, but not both at the same time.

Description : How do we refer to errors caused by faulty logic and coding mistakes?

Last Answer : Bugs.

Description : How many logic gates could be contained in lsi?

Last Answer : 1,000 to 2,000.

Description : . In the arithmetic/logic section, data is returned to what section after processing?

Last Answer : Internal storage.

Description : What capability allows the arithmetic/logic section to test various conditions encountered during processing and take action based on the result?

Last Answer : Logic.

Description : What is the equivalent logic gate of a two-input NAND gate with both inputs inverted?

Last Answer : OR gate.

Description : In what state must the inputs to a NOR gate be in order to produce a logic 1 output?

Last Answer : All inputs must be low.

Description : A NAND gate has inputs labeled as A, B, and C. If A and B are HIGH, C must be at what logic level to produce a HIGH output?

Last Answer : . Low.

Description : A NAND gate has Z and X as inputs. What will be the output logic level if Z is HIGH and X is LOW?

Last Answer : HIGH.

Description : What must be the logic state of R and S to produce the TRUE output?

Last Answer : Both must be 1s (HIGH) at the same time.

Description : If logic 1 = -5 vdc and logic 0 = 0 vdc, what logic polarity is being used?

Last Answer : Negative.

Description : If logic 1 = +2 vdc and logic 0 = -2 vdc, what logic polarity is being used?

Last Answer : Positive.

Description : If logic 1 = -5 vdc and logic 0 = -10 vdc, what logic polarity is being used?

Last Answer : Positive.

Description : If logic 1 = -5 vdc and logic 0 = -10 vdc, what logic polarity is being used?

Last Answer : Positive.

Description : With regard to computer logic circuits, what is meant by "complement?"

Last Answer : The opposite of the original statement.

Description : Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Last Answer : Bi-phase level encoding.

Description : What is the purpose of a logic probe?

Last Answer : They provide you with a visual indication of the logic state at any point you choose in the circuit.

Description : What does a lighted LED indicate on a logic comparator?

Last Answer : A difference in logic states between the reference IC and the IC under test.

Description : A lighted LED on a logic clip represents what logic level?

Last Answer : A "1" state.

Description : What are the two logic states of an IC?

Last Answer : A "1" or "0."

Description : The LED lamps of a typical logic probe are normally in what state?

Last Answer : DIM.

Last Answer : A NAND gate is called a universal logic element because any logic function can be realized by NAND gates alone.

Description : If current gain is required from an rf amplifier, what type of component should be used as an output coupling element?

Last Answer : A step-down transformer.

Description : What element is controlled to focus the beam?

Last Answer : The first anode.

Description : What element controls the number of electrons striking the screen?

Last Answer : Control grid.

Description : In applications where electronic waveforms are displayed on a CRT screen, the input signal is normally applied to what CRT element?

Last Answer : The vertical-deflection plate.