How do we refer to errors caused by faulty logic and coding mistakes?

How do we refer to errors caused by faulty logic and  coding mistakes?
by

1 Answer

Answer :

Bugs.
by

Related questions

Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Description : Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Last Answer : D. the approximation of the quantized signal

The systematic errors which persist and have regular effects in the performance of a survey operation are due to (A) Carelessness (B) Faulty instrument (C) Inattention (D) None of these

Description : The systematic errors which persist and have regular effects in the performance of a survey operation are due to (A) Carelessness (B) Faulty instrument (C) Inattention (D) None of these

Last Answer : (B) Faulty instrument

Errors due to frictions of the meter movement, incorrect spring tension, improper calibration or faulty instruments:

Description : Errors due to frictions of the meter movement, incorrect spring tension, improper calibration or faulty instruments:

Last Answer : instrument errors

True isn't it that life doesn't leave much leeway for errors/mistakes?

Description : True isn't it that life doesn't leave much leeway for errors/mistakes?

Last Answer : Nope. Nothing is forever. Only death. Can a mistake make fixing things a little more difficult? Sure, but unless you committed a crime that gets you years in jail, or you catch some sexual disease than ... is making her own life difficult. She is letting a small time in her life dictate her future.

Carefully reading a paper for grammar mistakes and spelling errors is a process called?

Description : Carefully reading a paper for grammar mistakes and spelling errors is a process called?

Last Answer : proofreading.

Which of the following statements is an not an example of an inherent limitation of internal control? a. The effectiveness of control procedures depends on segregation of duties. b. Errors may arise from mistakes in judgments. c. Most internal controls tend to be directed at routine transactions rather than nonroutine transactions. d. The cost-benefit relationship is a primary criterion in designing internal contro

Description : Which of the following statements is an not an example of an inherent limitation of internal control? a. The effectiveness of control procedures depends on segregation of duties. b. ... nonroutine transactions. d. The cost-benefit relationship is a primary criterion in designing internal contro

Last Answer : The effectiveness of control procedures depends on segregation of duties

The primary difference between financial statement errors and fraud is that a. Errors are intentional misstatements by management, while fraud involves unintentional mistakes or omissions. b. Errors are more likely to provide an indication that an illegal act has occurred. c. Errors are unintentional mistakes or omissions, while fraud involves intentional misstatements. d. There is no difference as errors and fraud have the same meaning.

Description : The primary difference between financial statement errors and fraud is that a. Errors are intentional misstatements by management, while fraud involves unintentional mistakes or omissions. b. Errors are more ... misstatements. d. There is no difference as errors and fraud have the same meaning.

Last Answer : Errors are unintentional mistakes or omissions, while fraud involves intentional misstatements.

Which one of the following mistakes/errors may be cumulative + or - : (A) Bad ranging (B) Bad straightening (C) Erroneous length of chain (D) Sag

Description : Which one of the following mistakes/errors may be cumulative + or - :  (A) Bad ranging  (B) Bad straightening  (C) Erroneous length of chain  (D) Sag

Last Answer : (C) Erroneous length of chain

Pick up the correct statement from the following: (A) Mistakes arise from inattention, inexperience or carelessness (B) Systematic errors persist and have regular effects in the survey performances (C) Accidental errors occur inspite of every precaution is taken (D) All the above

Description : Pick up the correct statement from the following: (A) Mistakes arise from inattention, inexperience or carelessness (B) Systematic errors persist and have regular effects in the survey performances (C) Accidental errors occur inspite of every precaution is taken (D) All the above

Last Answer : (D) All the above

Errors in computer programmes are called: (A) Follies (B) Mistakes (C) Bugs (D) Spam

Description : Errors in computer programmes are called: (A) Follies (B) Mistakes (C) Bugs (D) Spam

Last Answer : (C) Bugs

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : B. The approximation of the quantized signal

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : The approximation of the quantized signal

Working from the whole to the part is followed as the fundamental principle of surveying so as to : 1. Distribute errors 2. Improve ease of working 3. Prevent accumulation of errors 4. Compensate error in a way 5. Refer to common datum, say MSL (a) 1, 2 and 4 (b) 1, 3 and 5 (c) 3 and 4 (d) 2 and 5

Description : Working from the whole to the part is followed as the fundamental principle of surveying so as to : 1. Distribute errors 2. Improve ease of working 3. Prevent accumulation of errors 4. Compensate error in a way 5. Refer to common datum ... (a) 1, 2 and 4 (b) 1, 3 and 5 (c) 3 and 4 (d) 2 and 5

Last Answer : (c) 3 and 4

Do you think, in most cases, the root cause of the personality of school shooters is caused by faulty upbringing and NOT bullying?

Description : Do you think, in most cases, the root cause of the personality of school shooters is caused by faulty upbringing and NOT bullying?

Last Answer : When was the last school shooting in Germany? I will answer that. 2009. They have the same movies and video games. You are looking for a answer that is anything but easy access to guns. Getting a fucking gun ... . And yes.. I bought a shotgun at a pawn shop in ten minutes. They really don't care.

What is an NP problem? Does this refer to a specific kind of logic problem?

Description : What is an NP problem? Does this refer to a specific kind of logic problem?

Last Answer : I’m going to go out on a limb and guess that NP here stands for Neurolinguistic Programming… Although that is normally abbreviated to NLP… (have you pm’d the person who wrote NP in their answer?)

How is a binary 1 encoded in RZ line coding?

Description : How is a binary 1 encoded in RZ line coding?

Last Answer : A half-period optical pulse present in the first half of the bit duration.

How can the loss of timing occur in NRZ line coding?

Description : How can the loss of timing occur in NRZ line coding?

Last Answer : If long strings of 1s or 0s are present causing a lack of level transitions.

Which are more sensitive to alignment errors, single mode or multimode fibers?

Description : Which are more sensitive to alignment errors, single mode or multimode fibers?

Last Answer : Single mode.

List the three basic errors that occur during fiber alignment.

Description : List the three basic errors that occur during fiber alignment.

Last Answer : Fiber separation (longitudinal misalignment), lateral misalignment, and angular misalignment.

When are fixed skew errors most likely to show up?

Description : When are fixed skew errors most likely to show up?

Last Answer : When you record on one tape recorder and then reproduce on a different recorder.

Tape winding errors can cause a deformed tape pack. What are four common types of tape pack deformation?

Description : Tape winding errors can cause a deformed tape pack. What are four common types of tape pack deformation?

Last Answer : Cinching, pack slip, spoking, and windowing.

Some tapes you are using may have level errors. What does this mean and what is the cause?

Description : Some tapes you are using may have level errors. What does this mean and what is the cause?

Last Answer : The actual output signal level of the tape exceeds the manufacturer’s specified range for the output signal level (+ / - 10%). It’s caused by an uneven oxide coating on the tape due to worn tape or defective manufacture.

You see a build-up of dust and lint on the take-up reel of a tape recorder. This can cause which of the four types of tape errors?

Description : You see a build-up of dust and lint on the take-up reel of a tape recorder. This can cause which of the four types of tape errors?

Last Answer : Signal dropout errors and level errors. The dust and lint on the reel will eventually get onto the tape where it can get between the tape and the recorder’s heads.

What are four types of tape errors that can degrade a magnetic recording system’s performance?

Description : What are four types of tape errors that can degrade a magnetic recording system’s performance?

Last Answer : Signal dropout, noise, skew, and level. Dropout is the most common.

Explain the difference between multimode and single mode core-cladding concentricity errors.

Description : Explain the difference between multimode and single mode core-cladding concentricity errors.

Last Answer : Multimode core-cladding concentricity error is the distance between the core and cladding centers expressed as a percentage of core diameter while the single mode core-cladding concentricity error is just the distance between the core and cladding centers

What is the term used to refer to the losses which can be traced to the dielectric of a capacitor?

Description : What is the term used to refer to the losses which can be traced to the dielectric of a capacitor?

Last Answer : Power losses.

Why is it generally only necessary to refer to point-to-point data links when discussing the process of fiber optic system design?

Description : Why is it generally only necessary to refer to point-to-point data links when discussing the process of fiber optic system design?

Last Answer : Because fiber optic systems that incorporate complex architectures can be simplified into a collection of point-to-point data links before beginning the design process.

Refer to figure 3-55(A). If the following resistors were replaced with the values indicated: R1 = 900Ω, R3 = 1kΩ, what is the total power in the circuit? What is ER2?

Description : Refer to figure 3-55(A). If the following resistors were replaced with the values indicated: R1 = 900Ω, R3 = 1kΩ, what is the total power in the circuit? What is ER2?

Last Answer : PT = 60 W, ER2 = 10 V.

What does the term battery normally refer to?

Description : What does the term battery normally refer to?

Last Answer : A voltage source in a single container made from one or more cells.

What does the term battery normally refer to?

Description : What does the term battery normally refer to?

Last Answer : voltage source in a single container made from one or more cells.

Refer to figure 2-3(B). Why is the sulfuric acid decreasing?

Description : Refer to figure 2-3(B). Why is the sulfuric acid decreasing?

Last Answer : The sulfuric acid is chemically acting upon the anode and cathode which creates a current flow through the load

What type of logic family uses diodes in the input?

Description : What type of logic family uses diodes in the input?

Last Answer : DTL (diode transistor logic).

A, what logic element enables FF3 to toggle with the clock?

Description : A, what logic element enables FF3 to toggle with the clock?

Last Answer : The AND gate

What logic levels must exist for the FF to be toggled by the clock?

Description : What logic levels must exist for the FF to be toggled by the clock?

Last Answer : Both J and K must be HIGH.

What type of logic gates are added to a parallel adder to enable it to subtract?

Description : What type of logic gates are added to a parallel adder to enable it to subtract?

Last Answer : X-OR gates.

A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Description : A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Last Answer : . One or the other of the inputs must be HIGH, but not both at the same time.

How many logic gates could be contained in lsi?

Description : How many logic gates could be contained in lsi?

Last Answer : 1,000 to 2,000.

. In the arithmetic/logic section, data is returned to what section after processing?

Description : . In the arithmetic/logic section, data is returned to what section after processing?

Last Answer : Internal storage.

What capability allows the arithmetic/logic section to test various conditions encountered during processing and take action based on the result?

Description : What capability allows the arithmetic/logic section to test various conditions encountered during processing and take action based on the result?

Last Answer : Logic.

What is the equivalent logic gate of a two-input NAND gate with both inputs inverted?

Description : What is the equivalent logic gate of a two-input NAND gate with both inputs inverted?

Last Answer : OR gate.

In what state must the inputs to a NOR gate be in order to produce a logic 1 output?

Description : In what state must the inputs to a NOR gate be in order to produce a logic 1 output?

Last Answer : All inputs must be low.

A NAND gate has inputs labeled as A, B, and C. If A and B are HIGH, C must be at what logic level to produce a HIGH output?

Description : A NAND gate has inputs labeled as A, B, and C. If A and B are HIGH, C must be at what logic level to produce a HIGH output?

Last Answer : . Low.

A NAND gate has Z and X as inputs. What will be the output logic level if Z is HIGH and X is LOW? A NAND gate has Z and X as inputs. What will be the output logic level if Z is HIGH and X is LOW?

Description : A NAND gate has Z and X as inputs. What will be the output logic level if Z is HIGH and X is LOW?

Last Answer : HIGH.

What must be the logic state of R and S to produce the TRUE output?

Description : What must be the logic state of R and S to produce the TRUE output?

Last Answer : Both must be 1s (HIGH) at the same time.

If logic 1 = -5 vdc and logic 0 = 0 vdc, what logic polarity is being used?

Description : If logic 1 = -5 vdc and logic 0 = 0 vdc, what logic polarity is being used?

Last Answer : Negative.

If logic 1 = +2 vdc and logic 0 = -2 vdc, what logic polarity is being used?

Description : If logic 1 = +2 vdc and logic 0 = -2 vdc, what logic polarity is being used?

Last Answer : Positive.

If logic 1 = -5 vdc and logic 0 = -10 vdc, what logic polarity is being used?

Description : If logic 1 = -5 vdc and logic 0 = -10 vdc, what logic polarity is being used?

Last Answer : Positive.

If logic 1 = -5 vdc and logic 0 = -10 vdc, what logic polarity is being used?

Description : If logic 1 = -5 vdc and logic 0 = -10 vdc, what logic polarity is being used?

Last Answer : Positive.

With regard to computer logic circuits, what is meant by "complement?"

Description : With regard to computer logic circuits, what is meant by "complement?"

Last Answer : The opposite of the original statement.

Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Description : Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Last Answer : Bi-phase level encoding.