Power measurements performed with calorimeters are based on what three variables?

Power measurements performed with calorimeters are  based on what three variables?
by

1 Answer

Answer :

Temperature, mass, and time.
by

Related questions

List the fiber geometrical measurements performed in the laboratory.

Description : List the fiber geometrical measurements performed in the laboratory.

Last Answer : Cladding diameter, core diameter, numerical aperture, and mode field diameter.

What are the three units of measure most commonly used when referring to af power measurements?

Description : What are the three units of measure most commonly used when referring to af power measurements?

Last Answer : DB, dBm, and vu.

For power measurements, what advantage does an electronic wattmeter have over an electrodynamic wattmeter?

Description : For power measurements, what advantage does an electronic wattmeter have over an electrodynamic wattmeter?

Last Answer : Electronic wattmeters are capable of measuring high-fequency signals.

When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?

Description : When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?

Last Answer : When an installed optical fiber cable or cable plant is less than 50 meters in length.

When checking a diode with an ohmmeter, what is indicated by two high resistance measurements?

Description : When checking a diode with an ohmmeter, what is indicated by two high resistance measurements?

Last Answer : The diode is open or has a high-forward resistance.

Radar surface-angular measurements are referenced to true north and measured in what plane?

Description : Radar surface-angular measurements are referenced to true north and measured in what plane?

Last Answer : Horizontal plane.

Kelvin bridges are well suited for what type of measurements?

Description : Kelvin bridges are well suited for what type of measurements?

Last Answer : Small values of resistances

How does the supply voltage affect the accuracy of Wheatstone bridge measurements?

Description : How does the supply voltage affect the accuracy of Wheatstone bridge measurements?

Last Answer : As the supply voltage increases, bridge components may heat up and become less accurate.

When you are measuring a component using a bridge, what is the most common cause of inaccurate measurements?

Description : When you are measuring a component using a bridge, what is the most common cause of inaccurate measurements?

Last Answer : The capacitive and inductive characteristics of the test leads.

Why is a dead-zone fiber placed between the test fiber and OTDR when conducting attenuation measurements?

Description : Why is a dead-zone fiber placed between the test fiber and OTDR when conducting attenuation measurements?

Last Answer : To reduce the effect of the initial reflection at the OTDR

Why do end users perform fiber geometry measurements in the laboratory?

Description : Why do end users perform fiber geometry measurements in the laboratory?

Last Answer : To reduce system attenuation and coupling loss resulting from poor fiber fabrication.

What two properties of the launch condition may affect multimode fiber attenuation measurements?

Description : What two properties of the launch condition may affect multimode fiber attenuation measurements?

Last Answer : . Launch spot size and angular distribution.

Prior to substituting a diode, what measurements should you take to determine its condition?

Description : Prior to substituting a diode, what measurements should you take to determine its condition?

Last Answer : Voltages and resistances.

When making voltage measurements in a high-resistance circuit, you should always use a voltmeter with what relative value of resistance?

Description : When making voltage measurements in a high-resistance circuit, you should always use a voltmeter with what relative value of resistance?

Last Answer : . High.

What are the advantages of connecting ammeters in parallel when performing current measurements?

Description : What are the advantages of connecting ammeters in parallel when performing current measurements?

Last Answer : Decreased internal meter resistance, greater accuracy, and greater current range.

The frequency response of test equipment refers to what aspect of ac voltage measurements?

Description : The frequency response of test equipment refers to what aspect of ac voltage measurements?

Last Answer : the range of frequencies that can accurately be measured.

Which of the following statements concerning analog and digital devices are correct? A. The variables in digital systems are fixed quantities, and the variables in analog systems are continuous quantities. B. There are no basic differences between the two systems. C. Analog devices are superior in accuracy compared to digital devices. D. Operations in a digital device are performed simultaneously.

Description : Which of the following statements concerning analog and digital devices are correct? A. The variables in digital systems are fixed quantities, and the variables in analog systems are continuous ... accuracy compared to digital devices. D. Operations in a digital device are performed simultaneously.

Last Answer : Answer: A

Magnetic tape recorders can have up to three different heads installed. What are the three functions performed by a recorder's heads?

Description : Magnetic tape recorders can have up to three different heads installed. What are the three functions performed by a recorder's heads?

Last Answer : Record, reproduce, and erase.

What two variables determine the primary frequency of a resonant cavity?

Description : What two variables determine the primary frequency of a resonant cavity?

Last Answer : Size and shape of the cavity.

What symbol is used to designate the characteristic impedance of a line, and what two variables does it compare?

Description : What symbol is used to designate the characteristic impedance of a line, and what two variables does it compare?

Last Answer : Z0 and it is the ratio of E to I at every point along the line.

How can you estimate a gas flow based on two pressure measurements?

Description : How can you estimate a gas flow based on two pressure measurements?

Last Answer : You can use the Weymouth equation to estimate the gas flow. Below is the equation. The compressibility should be evaluated at Pavg shown below. Nomenclature is as follows: Q = flow rate, ... than a year old E=0.92 for average operating conditions E=0.85 for unfavorable operating conditions

Maintenance performed by the user activity is what maintenance level?

Description : Maintenance performed by the user activity is what maintenance level?

Last Answer : Organizational.

What two analyses are performed to determine if a link design is viable?

Description : What two analyses are performed to determine if a link design is viable?

Last Answer : Power budget and risetime budget

A six co-ordinate complex has the formula `CoCl_(3).5NH_(3).H_(2)O`. Electrical coductance measurements indicate the presence of three ions in one for

Description : A six co-ordinate complex has the formula `CoCl_(3).5NH_(3).H_(2)O`. Electrical coductance measurements indicate the presence of three ions in one for

Last Answer : A six co-ordinate complex has the formula `CoCl_(3).5NH_(3).H_(2)O`. Electrical coductance measurements indicate the ... complex? A. 3 B. 2 C. 4 D. 1

When A student measures the speed of a rolling ball three times. She adds the measurements and divides by 3. What quantity did the student calculate?

Description : When A student measures the speed of a rolling ball three times. She adds the measurements and divides by 3. What quantity did the student calculate?

Last Answer : Average measured speed.

Due to perturbation of the orbit, satellite orbit parameters are frequently updated on measurements carried out by its (A) Six ground stations (B) Five ground stations (C) Four ground stations (D) Three ground stations

Description : Due to perturbation of the orbit, satellite orbit parameters are frequently updated on measurements carried out by its (A) Six ground stations (B) Five ground stations (C) Four ground stations (D) Three ground stations

Last Answer : Answer: Option B

In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air consumption, brake power and incylinder pressure. Tutorials on engine performance parameters. Heat balance sheet. Engine performance curves. 1. The increase in intake air temperature into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Last Answer : ANSWER : B

Before using an all-purpose electric measuring instrument (multimeter) utilizing internal batteries to supply power for resistance measurements, you should FIRST ____________. A. remove one of the batteries B. remove all the batteries C. calibrate using a known external resistance D. select the proper resistance range

Description : Before using an all-purpose electric measuring instrument (multimeter) utilizing internal batteries to supply power for resistance measurements, you should FIRST ____________. A. remove one of the ... batteries C. calibrate using a known external resistance D. select the proper resistance range

Last Answer : Answer: D

You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should _____________. A. replace the batteries in the instrument B. measure resistance by dividing the voltmeter indication by the ammeter indication C. set the pointer using a bridge D. change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Description : You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should ... change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Last Answer : Answer: A

Vibration measuring instruments are classified on the basis of ____________. (A) contact between the vibrating system and measuring instrument (B) the requirement of power source (C) method of measurements (D) all of the above

Description : Vibration measuring instruments are classified on the basis of ____________. (A) contact between the vibrating system and measuring instrument (B) the requirement of power source (C) method of measurements (D) all of the above

Last Answer : (D) all of the above

Full scale Ammeter reading is 10 mA, Voltage across Ammeter is 100 mV. Then for 100 A measurements the power loss in the circuit is a) 1 W b) 10 W c) 100 W d) 1000 W

Description : Full scale Ammeter reading is 10 mA, Voltage across Ammeter is 100 mV. Then for 100 A measurements the power loss in the circuit is a) 1 W b) 10 W c) 100 W d) 1000 W

Last Answer : Ans: 10 W*

The matrix management model is based on a matrix of values between 0 and 9 for two primary variables. Which of the statements given above is/are correct ? (A) 1 only (B) 2 only (C) Both 1 and 2 (D) Neither 1 nor 2

Description : The matrix management model is based on a matrix of values between 0 and 9 for two primary variables. Which of the statements given above is/are correct ? (A) 1 only (B) 2 only (C) Both 1 and 2 (D) Neither 1 nor 2

Last Answer : Answer: Both 1 and 2

McDonald's uses a segmentation strategy for its sandwiches based on characteristics such as age, gender and income. It is using which group of segmentation variables? A)Demographic B)Psychographic C)Geographic D)Education E)Product related

Description : McDonald's uses a segmentation strategy for its sandwiches based on characteristics such as age, gender and income. It is using which group of segmentation variables? A)Demographic B)Psychographic C)Geographic D)Education E)Product related

Last Answer : A)Demographic

British Steel provides steel to various manufacturers in Britain. British Steel would most likely segment markets based on which one of the following variables: A)Demographic B)Psychographic C)Type of organisation D)Socio-economic E)Market density

Description : British Steel provides steel to various manufacturers in Britain. British Steel would most likely segment markets based on which one of the following variables: A)Demographic B)Psychographic C)Type of organisation D)Socio-economic E)Market density

Last Answer : C)Type of organisation

Contingency theories of leadership are based on the belief that (a) there is no single style of leadership appropriate to all situations (b) there is a single style of leadership appropriate to all managers (c) there is a single style of leadership appropriate to all situations (d) none of the above [hint: Contingency theories of leadership are based on the belief that there is no single style of leadership appropriate to all situations as it will be dependent upon the interactions between the variables involved in a leadership situation and patterns of leadership behaviour.]

Description : Contingency theories of leadership are based on the belief that (a) there is no single style of leadership appropriate to all situations (b) there is a single style of leadership ... the interactions between the variables involved in a leadership situation and patterns of leadership behaviour.]

Last Answer : (a) there is no single style of leadership appropriate to all situations 

While considering the seven leadership styles described by the leadership continuum, all of the following are variables that need to be considered for a manager, EXCEPT, (a) manager's preferred style based on experience. (b) manager's preferred style based on expectation. (c) manager's preferred style based on knowledge. (d) manager's preferred style based on confidence in upper management.

Description : While considering the seven leadership styles described by the leadership continuum, all of the following are variables that need to be considered for a manager, EXCEPT, (a) manager's preferred style ... style based on knowledge. (d) manager's preferred style based on confidence in upper management.

Last Answer : (d) manager's preferred style based on confidence in upper management. 

The experimental study is based on: (A) The manipulation of variables (B) Conceptual parameters (C) Replication of research (D) Survey of literature

Description : The experimental study is based on: (A) The manipulation of variables (B) Conceptual parameters (C) Replication of research (D) Survey of literature

Last Answer : (A) The manipulation of variables

The original LISP machines produced by both LMI and Symbolics were based on research performed at? a) CMU b) MIT c) Stanford University d) RAMD

Description : The original LISP machines produced by both LMI and Symbolics were based on research performed at? a) CMU b) MIT c) Stanford University d) RAMD

Last Answer : b) MIT

The original LISP machines produced by both LMI and Symbolics were based on research performed at __________ a) CMU b) MIT c) Stanford University d) RAMD

Description : The original LISP machines produced by both LMI and Symbolics were based on research performed at __________ a) CMU b) MIT c) Stanford University d) RAMD

Last Answer : b) MIT

The original LISP machines produced by both LMI and Symbolics were based on research performed at A : CMU B : MIT C : Stanford University D : RAMD

Description : The original LISP machines produced by both LMI and Symbolics were based on research performed at A : CMU B : MIT C : Stanford University D : RAMD

Last Answer : B : MIT

The original LISP machines produced by both LMI and Symbolics were based on research performed at A : CMU B : MIT C : Stanford University D : RAMD

Description : The original LISP machines produced by both LMI and Symbolics were based on research performed at A : CMU B : MIT C : Stanford University D : RAMD

Last Answer : B : MIT

The original LISP machines produced by both LMI and Symbolics were based on research performed at A : CMU B : MIT C : Stanford University D : RAMD

Description : The original LISP machines produced by both LMI and Symbolics were based on research performed at A : CMU B : MIT C : Stanford University D : RAMD

Last Answer : B : MIT

In some assurance engagements, the evaluation or measurement of the subject matter is performed by the responsible party, and the subject matter information is in the form of an assertion by the responsible party that is made available to intended users. These engagements are called a. Recurring engagements b. Non-assurance engagements c. Direct reporting engagements d. Assertion-based engagements

Description : In some assurance engagements, the evaluation or measurement of the subject matter is performed by the responsible party, and the subject matter information is in the form of an ... Recurring engagements b. Non-assurance engagements c. Direct reporting engagements d. Assertion-based engagements

Last Answer : Assertion-based engagements

In some assurance engagements, the evaluation or measurement of the subject matter is performed by the responsible party, and the subject matter information is in the form of an assertion by the responsible party that is made available to intended users. These engagements are called a. Recurring engagements b. Non-assurance engagements c. Direct reporting engagements d. Assertion-based engagements

Description : In some assurance engagements, the evaluation or measurement of the subject matter is performed by the responsible party, and the subject matter information is in the form of an ... Recurring engagements b. Non-assurance engagements c. Direct reporting engagements d. Assertion-based engagements

Last Answer : Assertion-based engagements

Which of the following is true of the report based on agreed-upon-procedures? a. The report is restricted to those parties who have agreed to the procedures to be performed. b. The CPA provides the recipients of the report limited assurance as to reasonableness of the assertion(s) presented in the financial information. c. The report states that the auditor has not recognized any basis that requires revision of financial statements. d. The report should state that the procedures performed are limited to analytical procedures and inquiry

Description : Which of the following is true of the report based on agreed-upon-procedures? a. The report is restricted to those parties who have agreed to the procedures to be performed. b. The CPA ... . d. The report should state that the procedures performed are limited to analytical procedures and inquiry

Last Answer : The report is restricted to those parties who have agreed to the procedures to be performed

In assertion-based assurance engagements, the evaluation or measurement of the subject matter against criteria is performed by the a. Intended users b. Responsible party c. Practitioner d. AASC

Description : In assertion-based assurance engagements, the evaluation or measurement of the subject matter against criteria is performed by the a. Intended users b. Responsible party c. Practitioner d. AASC

Last Answer : Responsible party

Error rate is A. an error-detectingcode based ona summation operation performed onthebits to be checked. B. a checkbit appended to anarrayof binary digits to make thesum of all thebinary digits. C. a code in which each expressionconforms to specific rules of construction, so that if certain errors occur in an expression, the resulting expression will not conform to the rulesof constructionand thus thepresence of the errors isdetected. D. the ratioof the number ofdata units in error to the total number of dataunits E. None of the above

Description : Error rate is A. an error-detectingcode based ona summation operation performed onthebits to be checked. B. a checkbit appended to anarrayof binary digits to make thesum of all thebinary digits. C. a ... ratioof the number ofdata units in error to the total number of dataunits E. None of the above

Last Answer : the ratioof the number ofdata units in error to the total number of dataunits

A layout is an arrangement arrangement based on the sequence sequence of operations operations that are performed performed during the manufacturing of a good or the delivery of a service. a. Group b. Process c. Product d. Fixed position

Description : A layout is an arrangement arrangement based on the sequence sequence of operations operations that are performed performed during the manufacturing of a good or the delivery of a service. a. Group b. Process c. Product d. Fixed position

Last Answer : b. Process

Is it okay to remove a bra for blouse measurements?

Description : Is it okay to remove a bra for blouse measurements?

Last Answer : Well, not if you’ll be wearing a bra with the blouse.

How do I find my measurements?

Description : How do I find my measurements?

Last Answer : This sort of thing has never made sense to me, jobs ask for pants measurements, and I don’t have a clue what to say lol