Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Should aluminum wire be cleaned prior to installing an  aluminum terminal lug or splice?
by

1 Answer

Answer :

No, it is done automatically by the petroleum abrasive compound  that comes in the terminal or splices.
by

Related questions

Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?

Description : Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?

Last Answer : Spaghetti or heat-shrinkable tubing.

What are the basic requirements for any splice or terminal connection?

Description : What are the basic requirements for any splice or terminal connection?

Last Answer : The connection must be both mechanically and electrically as strong as the conductor or device with which it is used

Why must items to be soldered be cleaned just prior to the soldering process?

Description : Why must items to be soldered be cleaned just prior to the soldering process?

Last Answer : Solder will not adhere to dirty, greasy, or oxidized surfaces.

Why are the ends of the wire clamped down after a Western Union splice is made?

Description : Why are the ends of the wire clamped down after a Western Union splice is made?

Last Answer : To prevent damage to the tape insulation.

Why should a lockwasher never be used with an aluminum terminal?

Description : Why should a lockwasher never be used with an aluminum terminal?

Last Answer : It gouges the terminal lug and causes deterioration.

What tools should be used to install large aluminum terminal lugs and splices?

Description : What tools should be used to install large aluminum terminal lugs and splices?

Last Answer : Power-operated crimping tools.

What tool should be used to strip aluminum wire?

Description : What tool should be used to strip aluminum wire?

Last Answer : Knife.

State two advantages of using aluminum wire for carrying electricity over long distances.

Description : State two advantages of using aluminum wire for carrying electricity over long distances.

Last Answer : It is light and reduces corona.

Which type of splice is used to splice a lighting fixture to a branch circuit?

Description : Which type of splice is used to splice a lighting fixture to a branch circuit?

Last Answer : Fixture joint.

What fiber property directly affects splice loss in fusion splicing?

Description : What fiber property directly affects splice loss in fusion splicing?

Last Answer : The angles and quality of the two fiber-end faces.

The Navy recommends using the rotary splice for what two reasons?

Description : The Navy recommends using the rotary splice for what two reasons?

Last Answer : It is a low-loss mechanical splice that provides stable environmental and mechanical performance in the Navy environment, and it requires only a small amount of training.

Define a fiber optic splice.

Description : Define a fiber optic splice.

Last Answer : A permanent fiber joint whose purpose is to establish an optical connection between two individual optical fibers.

Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Description : Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Last Answer : Splice.

What is the full form of LUG ?

Description : What is the full form of LUG ?

Last Answer : The full version of LUG is Linux User Group

What is the lug nut torque for a 1993 Volvo 960?

Description : What is the lug nut torque for a 1993 Volvo 960?

Last Answer : The lug nut torque for that 1993 Volvo 960 is 63 ft.lbs.

can a universal 5 lug rim fit a 6 lug?

Description : can a universal 5 lug rim fit a 6 lug?

Last Answer : no

When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by _____________. A. knotting the cords together at the plugs B. taping the plugs together C. installing a special fitting to eliminate plug separation D. all of the above

Description : When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by ... the plugs together C. installing a special fitting to eliminate plug separation D. all of the above

Last Answer : Answer: D

How much rail ends are cleaned with Kerosene Oil and steel wire brush? (i) Minimum 100 mm both side (ii) Minimum 50 mm both side.* (iii) No need (iv) As decided by site supervisor

Description : How much rail ends are cleaned with Kerosene Oil and steel wire brush? (i) Minimum 100 mm both side (ii) Minimum 50 mm both side.* (iii) No need (iv) As decided by site supervisor

Last Answer : (ii) Minimum 50 mm both side.*

List five precautions to take when installing fiber optic systems on board naval ships.

Description : List five precautions to take when installing fiber optic systems on board naval ships.

Last Answer : a. Never bend an optical fiber or cable at a radius of curvature less than the minimum bend radius. b. Never pull fiber optic cables tight or fasten them over or through sharp corners or ... the hardware. e. Allow only trained, authorized personnel to install or repair fiber optic systems.

How far are posts when installing a wire fence?

Description : How far are posts when installing a wire fence?

Last Answer : The posts are generally six feet apart. You can use the wire fence to hold it up. You can go every ten feet though it may not be as stable as using six.

Tips for Installing Speaker Wire?

Description : Tips for Installing Speaker Wire?

Last Answer : Whether you are installing a Home Theater system, a car stereo system, or you are installing speakers on a deck or patio, it is important to know how to install and use speaker wire. ... call a professional to help you install your speaker wire to avoid possible damage to your audio components.

When should wires be twisted prior to lacing?

Description : When should wires be twisted prior to lacing?

Last Answer : When required, such as for the filament leads in electron tube amplifiers.

On what range should you set the voltmeter prior to taking a voltage measurement?

Description : On what range should you set the voltmeter prior to taking a voltage measurement?

Last Answer : Highest.

Prior to substituting a diode, what measurements should you take to determine its condition?

Description : Prior to substituting a diode, what measurements should you take to determine its condition?

Last Answer : Voltages and resistances.

State four advantages of copper over aluminum as a conductor.

Description : State four advantages of copper over aluminum as a conductor.

Last Answer : It has higher conductivity, it is more ductile, it has relatively high tensile strength, and it can be easily soldered.

How are copper wire and aluminum foil alike?

Description : How are copper wire and aluminum foil alike?

Last Answer : negative charges can't move through them

Fuse wire is made of _____? A. 63% lead arid 37% tin B. 63% tin and 37% aluminum C. 63% tin and 37% lead D. 63% lead and 37% aluminum

Description : Fuse wire is made of _____? A. 63% lead arid 37% tin B. 63% tin and 37% aluminum C. 63% tin and 37% lead D. 63% lead and 37% aluminum

Last Answer : ANSWER: C

Fuse wire is made of _____? A. 63% lead arid 37% tin B. 63% tin and 37% aluminum C. 63% tin and 37% lead D. 63% lead and 37% aluminum

Description : Fuse wire is made of _____? A. 63% lead arid 37% tin B. 63% tin and 37% aluminum C. 63% tin and 37% lead D. 63% lead and 37% aluminum

Last Answer : ANSWER: C

Fuse wire is made of-------? A. 63% tin and 37% lead (Answer) B. 63% lead and 37% tin C. 63% tin and 37% aluminum D. 63% lead and 37% aluminum

Description : Fuse wire is made of-------? A. 63% tin and 37% lead (Answer) B. 63% lead and 37% tin C. 63% tin and 37% aluminum D. 63% lead and 37% aluminum

Last Answer : A. 63% tin and 37% lead (Answer)

What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

Description : What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

Last Answer : 60-percent tin and 40-percent lead (60/40 solder).

Why are preinsulated terminal lugs and splices color coded?

Description : Why are preinsulated terminal lugs and splices color coded?

Last Answer : To identify wire sizes they are to be used on.

What is a major advantage of the crimped terminal over the soldered terminal?

Description : What is a major advantage of the crimped terminal over the soldered terminal?

Last Answer : Requires relatively little operator skill to install.

In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Description : In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Last Answer : Negative.

The work center supervisor can update what items from a user terminal?

Description : The work center supervisor can update what items from a user terminal?

Last Answer : COSAL, APL, EIC, SHIP'S FORCE WORK LIST, and CSMP.

What is the range of earth terminal transmitter output power?

Description : What is the range of earth terminal transmitter output power?

Last Answer : Up to 20 kilowatts.

What is the function of a tone terminal set?

Description : What is the function of a tone terminal set?

Last Answer : It converts dc to audio or vice versa.

Why will a meter indicate more voltage at the battery terminal when the battery is out of a circuit than when the battery is in a circuit?

Description : Why will a meter indicate more voltage at the battery terminal when the battery is out of a circuit than when the battery is in a circuit?

Last Answer : The internal (source) resistance of the battery will drop some of the voltage

In the primary cell, why are negative ions attracted to the negative terminal of the cell?

Description : In the primary cell, why are negative ions attracted to the negative terminal of the cell?

Last Answer : The positive charge caused by electrons leaving the negative electrode attracts the negative ions.

An ammeter should always be connected so that current will flow into what terminal and out of what terminal?

Description : An ammeter should always be connected so that current will flow into what terminal and out of what terminal?

Last Answer : Negative, positive

The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Description : The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Last Answer : Answer: C

Why all the cut and splice jobs?

Description : Why all the cut and splice jobs?

Last Answer : answer:Do you have an example of a commercial you're talking about? Maybe we can post an example? Commercials have always tended to catch the viewer's eye/attention faster than the traditional programming. What ... in the same (hotel) room. CSI kind of shows, but I believe there are worse examples.

How to splice an s-video cable to an RCA (composite) cable?

Description : How to splice an s-video cable to an RCA (composite) cable?

Last Answer : Amazon (and many others, I’m sure) has plenty of cables that should do the trick.

Identify the problem in the following sentence:Tracy rides bulls in rodeos he’s really good. A. Fused sentence B. Comma splice C. Sentence fragment D. Dangling modifier?

Description : Identify the problem in the following sentence:Tracy rides bulls in rodeos he’s really good. A. Fused sentence B. Comma splice C. Sentence fragment D. Dangling modifier?

Last Answer : Do you know this answer yet?

Which of the. following sentences includes a comma splice?

Description : Which of the. following sentences includes a comma splice?

Last Answer : The bakery was closed, it was a Sunday.

A splice some contains all the following except (A) hnRNA (B) snRNAs (C) Some proteins (D) Ribosome

Description : A splice some contains all the following except (A) hnRNA (B) snRNAs (C) Some proteins (D) Ribosome

Last Answer : Answer : D

Splice sites are present in (A) Prokaryotic mRNA (B) Eukaryotic mRNA (C) Eukaryotic hnRNA (D) All of these

Description : Splice sites are present in (A) Prokaryotic mRNA (B) Eukaryotic mRNA (C) Eukaryotic hnRNA (D) All of these

Last Answer : Answer : C

The proper way to apply plastic electrical tape to an electric cable splice is to _____________. A. apply tape to the braided cover, but avoid touching it B. wind the tape so that each turn overlaps the turn before it C. apply the tape in one non-overlapping layer only D. heat the tape with a soldering iron for good bonding

Description : The proper way to apply plastic electrical tape to an electric cable splice is to _____________. A. apply tape to the braided cover, but avoid touching it B. wind the tape so that each turn overlaps ... tape in one non-overlapping layer only D. heat the tape with a soldering iron for good bonding

Last Answer : Answer: B

What is the average insertion loss of fusion splice in fiber optics? a. 0.09dB b. 0.9dB c. 0.19dB d. 0.009dB

Description : What is the average insertion loss of fusion splice in fiber optics? a. 0.09dB b. 0.9dB c. 0.19dB d. 0.009dB

Last Answer : a. 0.09dB

Steel bars are generally connected together to get greater length than the standard length by providing (A) Straight bar splice (B) Hooked splice (C) Dowel splice (D) All the above

Description : Steel bars are generally connected together to get greater length than the standard length by providing (A) Straight bar splice (B) Hooked splice (C) Dowel splice (D) All the above

Last Answer : Answer: Option D

Consider the following statements in respect of design of web and flange as splices: 1. Flange splice shall be designed for actual BM at the section. 2. Flange splice shall be designed to resist the actual shear at the section. 3. Web splice shall be designed to resist the actual shear at the section 4. Web splice shall be designed for actual BM. Which of these statements are correct? (a) 1 and 3 (b) 2 and 3 (c) 3 and 4 (d)1 and 4

Description : Consider the following statements in respect of design of web and flange as splices: 1. Flange splice shall be designed for actual BM at the section. 2. Flange splice shall be designed to resist the actual shear at the section. 3. Web ... are correct? (a) 1 and 3 (b) 2 and 3 (c) 3 and 4 (d)1 and 4

Last Answer : (a) 1 and 3