Modes that are bound at one wavelength may not exist at longer wavelengths. What is the wavelength at which a mode ceases to be bound called?

Modes that are bound at one wavelength may not exist at  longer wavelengths. What is the wavelength at which a mode  ceases to be bound called?
by

1 Answer

Answer :

Cutoff wavelength
by

Related questions

What happens to the fundamental mode as the operating wavelength becomes longer than the single mode cutoff wavelength?

Description : What happens to the fundamental mode as the operating wavelength becomes longer than the single mode cutoff wavelength?

Last Answer : The fundamental mode becomes increasingly lossy.

Silica (pure glass) fibers are used because of their low intrinsic material absorption at the wavelengths of operation. This wavelength of operation is between two intrinsic absorption regions. What are these two regions called? What are the wavelengths of operation for these two regions?

Description : Silica (pure glass) fibers are used because of their low intrinsic material absorption at the wavelengths of operation. This wavelength of operation is between two intrinsic absorption regions. What are these two regions called? What are the wavelengths of operation for these two regions?

Last Answer : Ultraviolet absorption region (below 400 nm) and infrared absorption region (above 2000 nm).

When the frequency is decreased so that two quarter wavelengths are longer than the "a" (wide) dimension of the waveguide, what will happen?

Description : When the frequency is decreased so that two quarter wavelengths are longer than the "a" (wide) dimension of the waveguide, what will happen?

Last Answer : Energy will no longer pass through the waveguide.

opposite: smash brosas much as smash bros is an awful game here are its redeeminf factors- old modes are great- story mode is no longer dishonored after u play it the third time- the unbalanced fighters are a true plus for the game?

Description : opposite: smash brosas much as smash bros is an awful game here are its redeeminf factors- old modes are great- story mode is no longer dishonored after u play it the third time- the unbalanced fighters are a true plus for the game?

Last Answer : contluigi is a good mario swap for the gamesmashdown on low numbers enough saidanswr: agree smash five 7 of 10

A mode filter is a device that attenuates specific modes propagating in the core of an optical fiber. What mode propagating along single mode fibers do mode filters eliminate?

Description : A mode filter is a device that attenuates specific modes propagating in the core of an optical fiber. What mode propagating along single mode fibers do mode filters eliminate?

Last Answer : Second-order mode.

As the core and cladding modes travel along the fiber, mode coupling occurs. What is mode coupling?

Description : As the core and cladding modes travel along the fiber, mode coupling occurs. What is mode coupling?

Last Answer : Mode coupling is the exchange of power between two modes.

The complete absorption of one company by another, wherein the acquiring firm retains its identity and the acquired firm ceases to exist as a separate entity, is called a…. A. Acquisition B. Consolidation. C. Merger D. Spinof

Description : The complete absorption of one company by another, wherein the acquiring firm retains its identity and the acquired firm ceases to exist as a separate entity, is called a…. A. Acquisition B. Consolidation. C. Merger D. Spinof

Last Answer : Acquisition

The complete absorption of one company by another, wherein the acquiring firm retains its identity and the acquired firm ceases to exist as a separate entity, is called a…. A. Acquisition B. Consolidation. C. Merger D. Spinoff

Description : The complete absorption of one company by another, wherein the acquiring firm retains its identity and the acquired firm ceases to exist as a separate entity, is called a…. A. Acquisition B. Consolidation. C. Merger D. Spinoff

Last Answer : Acquisition

What exists when one person has it but ceases to exist when another person gets it? -Riddles

Description : What exists when one person has it but ceases to exist when another person gets it? -Riddles

Last Answer : A Secret.

Laminar flow of a Newtonian fluid ceases to exist, when the Reynolds number exceeds (A) 4000 (B) 2100 (C) 1500 (D) 3000

Description : Laminar flow of a Newtonian fluid ceases to exist, when the Reynolds number exceeds (A) 4000 (B) 2100 (C) 1500 (D) 3000

Last Answer : (B) 2100

AS – 14 is not applicable if when Transferee Company acquires Transferor Company and Transferor Company: A. Ceases to exist B. Separate entity is Continue to exist C. Applied in all cases D. None of the above

Description : AS – 14 is not applicable if when Transferee Company acquires Transferor Company and Transferor Company: A. Ceases to exist B. Separate entity is Continue to exist C. Applied in all cases D. None of the above

Last Answer : B. Separate entity is Continue to exist

If the block of asset ceases to exist on the last day of the previous year, depreciation admissible for block of assets will be: a) Nil b) 50% of the value of the block of assets on the first day of the previous year c) The total value of the block of the assets on the first day of the previous year d) 50% of the value of the block of assets on last day of the previous year

Description : If the block of asset ceases to exist on the last day of the previous year, depreciation admissible for block of assets will be: a) Nil b) 50% of the value of the block of assets on the first day ... of the previous year d) 50% of the value of the block of assets on last day of the previous year

Last Answer : a) Nil

In which of the following case no depreciation is allowable: a) Block Exist but WDV ceases to exist b) WDV exist but the block ceases to exist c) WDV and Block both ceases to exist d) All of the above

Description : In which of the following case no depreciation is allowable: a) Block Exist but WDV ceases to exist b) WDV exist but the block ceases to exist c) WDV and Block both ceases to exist d) All of the above

Last Answer : c) WDV and Block both ceases to exist

What is NOT true about the tenure of the Speaker of the Lok Sabha? (a) He is no longer a Speaker if he ceases to be a member of the Lok Sabha due to any reason (b) When the Lok Sabha dissolves, the Speaker vacates his position simultaneously (c) The Speaker is the head of the Lok Sabha and also its representative (d) When there's a deadlock in vote, the Speaker can cast his casting vote to break the deadlock

Description : What is NOT true about the tenure of the Speaker of the Lok Sabha? (a) He is no longer a Speaker if he ceases to be a member of the Lok Sabha due to any reason (b) When the Lok Sabha ... representative (d) When there's a deadlock in vote, the Speaker can cast his casting vote to break the deadlock

Last Answer : (b) When the Lok Sabha dissolves, the Speaker vacates his position simultaneously

The cutoff wavelength of matched-clad and depressed-clad single mode fibers varies according to the fiber's radius of curvature and length. The cutoff wavelength of which single mode fiber type is more sensitive to length

Description : The cutoff wavelength of matched-clad and depressed-clad single mode fibers varies according to the fiber's radius of curvature and length. The cutoff wavelength of which single mode fiber type is more sensitive to length

Last Answer : Depressed-clad.

A dye absorbs a photon of wavelength `lambda` and re`-` emits the same energy into two phorons of wavelengths `lambda_(1)` and `lambda_(2)` respective

Description : A dye absorbs a photon of wavelength `lambda` and re`-` emits the same energy into two phorons of wavelengths `lambda_(1)` and `lambda_(2)` respective

Last Answer : A dye absorbs a photon of wavelength `lambda` and re`-` emits the same energy into two phorons of wavelengths ` ... 2))/((lambda_(1)+lambda_(2))^(2))`

The X –ray beam coming from an X-ray tube will be (a) Monochromatic (b) Having all wavelengths larger than a certain minimum wavelength (c) Having all wavelengths smaller than a certain maximum wavelength (d) Having all wavelengths between a minimum and a maximum wavelength

Description : The X –ray beam coming from an X-ray tube will be (a) Monochromatic (b) Having all wavelengths larger than a certain minimum wavelength (c) Having all wavelengths smaller than a certain maximum wavelength (d) Having all wavelengths between a minimum and a maximum wavelength

Last Answer : Ans:(b)

Given light of wavelength λa = 600nm and light of λb = 550nm, which has a higher energy per photon? (a) Ea > Eb (b) Ea = Eb (c) Neither has energy because light at these wavelengths carries no energy (d) Eb > Ea

Description : Given light of wavelength λa = 600nm and light of λb = 550nm, which has a higher energy per photon? (a) Ea > Eb (b) Ea = Eb (c) Neither has energy because light at these wavelengths carries no energy (d) Eb > Ea

Last Answer : (d) Eb > Ea

What is true for intensity of scattered light according to Rayleigh’s law? A. The intensity for scattering for light of largest wavelength more B. The light of smallest wavelength will be scattered more C. All the wavelengths are scattered equally D. Intensity of light is not affected by scattering

Description : What is true for intensity of scattered light according to Rayleigh's law? A. The intensity for scattering for light of largest wavelength more B. The light of smallest wavelength will be scattered ... C. All the wavelengths are scattered equally D. Intensity of light is not affected by scattering

Last Answer : B. The light of smallest wavelength will be scattered more

Delay differences between the source wavelengths occur as the optical signal propagates along the fiber. What is this called?

Description : Delay differences between the source wavelengths occur as the optical signal propagates along the fiber. What is this called?

Last Answer : Differential group delay t(l).

The term single mode and multimode are best described as ∙ A. a number of fibers placed into fiber-optic cable ∙ B. the number of voice channels each fiber can support ∙ C. the number of wavelengths each fiber can support ∙ D. the index number

Description : The term single mode and multimode are best described as ∙ A. a number of fibers placed into fiber-optic cable ∙ B. the number of voice channels each fiber can support ∙ C. the number of wavelengths each fiber can support ∙ D. the index number

Last Answer : C. the number of wavelengths each fiber can support

Sodium fluorescein: a. has a higher affinity for plasma protein than indocyanine green. b. does not leak from the choroidal vasculature. c. does not leak from normal retinal vasculature. d. emits light of longer wavelengths than the one it absorbs

Description : Sodium fluorescein: a. has a higher affinity for plasma protein than indocyanine green. b. does not leak from the choroidal vasculature. c. does not leak from normal retinal vasculature. d. emits light of longer wavelengths than the one it absorbs

Last Answer : does not leak from normal retinal vasculature.

The blue colour of sky is due to (1) reflection of sunlight (2) refraction of sunlight (3) scattering of shorter wavelengths of sunlight in the atmosphere (4) scattering of longer wavelengths of sunlight in the atmosphere

Description : The blue colour of sky is due to (1) reflection of sunlight (2) refraction of sunlight (3) scattering of shorter wavelengths of sunlight in the atmosphere (4) scattering of longer wavelengths of sunlight in the atmosphere

Last Answer : scattering of shorter wavelengths of sunlight in the atmosphere

What unit is used to measure the different wavelengths of light?

Description : What unit is used to measure the different wavelengths of light?

Last Answer : Angstrom unit.

What determines the range of wavelengths over which meaningful data is obtained for calculating the chromatic dispersion?

Description : What determines the range of wavelengths over which meaningful data is obtained for calculating the chromatic dispersion?

Last Answer : The wavelength range of the optical source(s) used.

Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. a. Acceptance angle b. Modes c. Sensors d. Aperture

Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. a. Acceptance angle b. Modes c. Sensors d. Aperture

Last Answer : b. Modes

How many modes possible with a multimode step-index with a core diameter of 50 um, a core refractive index of 1.6, a cladding refractive index of 1.584, and a wavelength of 1300 nm. ∙ A. 456 ∙ B. 213 ∙ C. 145 ∙ D. 372

Description : How many modes possible with a multimode step-index with a core diameter of 50 um, a core refractive index of 1.6, a cladding refractive index of 1.584, and a wavelength of 1300 nm. ∙ A. 456 ∙ B. 213 ∙ C. 145 ∙ D. 372

Last Answer : D. 372

Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture

Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture

Last Answer : b. Modes

Modes of a light pulse that enter the fiber at one time exit the fiber at different times. This condition causes the light pulse to spread. What is this condition called?

Description : Modes of a light pulse that enter the fiber at one time exit the fiber at different times. This condition causes the light pulse to spread. What is this condition called?

Last Answer : Modal dispersion.

Traditional mode of irrigation are practiced in India because, A. They are cheap. B. They are reliable. C. Indians don’t use other modes as they are expensive. D. They are available abundantly.

Description : Traditional mode of irrigation are practiced in India because, A. They are cheap. B. They are reliable. C. Indians don’t use other modes as they are expensive. D. They are available abundantly.

Last Answer : A. They are cheap. B. They are reliable.

Given below are four methods (A-D) and their modes of action (i-iv) in achieving contraception. Select their correct matching from the four options that follow. Method Mode of Action A. The pill (i) Prevents sperms reaching cervix B. Condom (ii) Prevents implantation C. Vasectomy (iii) Prevents ovulation D. Copper T (iv) Semen contains no sperms (a) A – (iii), B – (iv), C – (i), D – (ii) (b) A – (ii), B – (iii), C – (i), D – (iv) (c) A – (iii), B – (i), C – (iv), D – (ii) (d) A – (iv), B – (i), C – (ii), D – (iii)

Description : Given below are four methods (A-D) and their modes of action (i-iv) in achieving contraception. Select their correct matching from the four options that follow. Method Mode of Action A. The pill (i) Prevents sperms reaching cervix B. Condom ... D - (ii) (d) A - (iv), B - (i), C - (ii), D - (iii)

Last Answer : A – (iii), B – (i), C – (iv), D – (

How many longitudinal modes can fall within a laser’s gain bandwidth? ∙ a. 2 ∙ b. 5 ∙ d. No fixed limit, dependent on bandwidth and mode spacing ∙ c. 9

Description : How many longitudinal modes can fall within a laser’s gain bandwidth? ∙ a. 2 ∙ b. 5 ∙ c. 9 ∙ d. No fixed limit, dependent on bandwidth and mode spacing

Last Answer : ∙ d. No fixed limit, dependent on bandwidth and mode spacing

In serial communication modes, mode 1 the Baud rate = a) BR=2SMOD/32 * (Timer 0 over flow rate) b) BR=2SMOD/16 * (Timer 1 over flow rate) c) BR=2SMOD/16 * (Timer 0 over flow rate) d) BR=2SMOD/32 * (Timer 1 over flow rate)

Description : In serial communication modes, mode 1 the Baud rate = a) BR=2SMOD/32 * (Timer 0 over flow rate) b) BR=2SMOD/16 * (Timer 1 over flow rate) c) BR=2SMOD/16 * (Timer 0 over flow rate) d) BR=2SMOD/32 * (Timer 1 over flow rate)

Last Answer : b) BR=2SMOD/16 * (Timer 1 over flow rate)

In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Description : In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Last Answer : a) 1, 8bit, single processor

In 8255, under the I/O mode of operation we have __ modes. Under which mode will have the following features i) A 5 bit control port is available. ii) Three I/O lines are available at Port C. a) 3, Mode2 b) 2, Mode 2 c) 4, Mode 3 d) 3, Mode 2

Description : In 8255, under the I/O mode of operation we have __ modes. Under which mode will have the following features i) A 5 bit control port is available. ii) Three I/O lines are available at Port C. a) 3, Mode2 b) 2, Mode 2 c) 4, Mode 3 d) 3, Mode 2

Last Answer : a) 3, Mode2

In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Description : In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Last Answer : c) 2, 9 bit, multiple processors

Describe power down mode and ideal mode of 8051 with circuit diagram . which SFR is used to set these modes and draw the same.

Description : Describe power down mode and ideal mode of 8051 with circuit diagram . which SFR is used to set these modes and draw the same.

Last Answer : IDLE MODE In the Idle mode, the internal clock signal is gated off to the CPU, but not to the Interrupt, Timer and Serial Port functions. The CPU status is preserved in its entirety, the Stack Pointer, ... t change on chip RAM PCON (Power Control Register) SFR is used to set these modes.

The field arrangements in waveguides are divided into what two categories to describe the various modes of operation?

Description : The field arrangements in waveguides are divided into what two categories to describe the various modes of operation?

Last Answer : Transverse electric (TE) and transverse magnetic (TM).

What four fiber properties determine the number of modes propagating in a multimode gradedindex fiber?

Description : What four fiber properties determine the number of modes propagating in a multimode gradedindex fiber?

Last Answer : Numerical aperture (NA), relative refractive index difference ( D), profile parameter (α), and normalized frequency (V).

Debunching of the electron bunches in the higher modes of a reflex klystron has what effect on output power?

Description : Debunching of the electron bunches in the higher modes of a reflex klystron has what effect on output power?

Last Answer : Power is reduced.

What are the five most prominent communications modes of operation?

Description : What are the five most prominent communications modes of operation?

Last Answer : Simplex, half-duplex, semiduplex, duplex, and broadcast.

What are the transmitter operating modes?

Description : What are the transmitter operating modes?

Last Answer : Lsb, usb, isb, AM, cw, fsk.

What are the tuning modes for the coupler group discussed?

Description : What are the tuning modes for the coupler group discussed?

Last Answer : Automatic, semiautomatic, and manual.

What are the two teletypewriter modes of operation?

Description : What are the two teletypewriter modes of operation?

Last Answer : Synchronous and nonsynchronous

Does underfilling a multimode optical fiber excite mainly high-order or low-order modes?

Description : Does underfilling a multimode optical fiber excite mainly high-order or low-order modes?

Last Answer : Low-order modes.

The number of modes propagated in a multimode fiber depends on core size and numerical aperture (NA). If the core size and the NA decrease, will the number of modes propagated increase or decrease?

Description : The number of modes propagated in a multimode fiber depends on core size and numerical aperture (NA). If the core size and the NA decrease, will the number of modes propagated increase or decrease?

Last Answer : Decrease.

The fiber's normalized frequency (V) determines how many modes a fiber can support. As the value of V increases, will the number of modes supported by the fiber increase or decrease?

Description : The fiber's normalized frequency (V) determines how many modes a fiber can support. As the value of V increases, will the number of modes supported by the fiber increase or decrease?

Last Answer : Increase.

Low-order and high-order modes propagate along an optical fiber. How are modes determined to be low-order or high order modes?

Description : Low-order and high-order modes propagate along an optical fiber. How are modes determined to be low-order or high order modes?

Last Answer : Depends on the bending caused by the velocity difference of the wave traveling through different mediums

All the following statements regarding calcium are correct except (A) It diffuses as a divalent cation (B) It freely diffuses across the endoplasmic reticulum of muscle cells (C) It can exist in the blood as ionic form and also protein bound (D) It is found in high concentration in bones

Description : All the following statements regarding calcium are correct except (A) It diffuses as a divalent cation (B) It freely diffuses across the endoplasmic reticulum of muscle cells (C) It can exist in the blood as ionic form and also protein bound (D) It is found in high concentration in bones

Last Answer : Answer : B