What determines the range of wavelengths over which meaningful data is obtained for calculating the chromatic dispersion?

What determines the range of wavelengths over which  meaningful data is obtained for calculating the chromatic  dispersion?
by

1 Answer

Answer :

The wavelength range of the optical source(s) used.
by

Related questions

Is the width of the range of wavelengths emitted by the light source a. Bandwidth b. Chromatic Dispersion c. Spectral width d. Beamwidth

Description : Is the width of the range of wavelengths emitted by the light source a. Bandwidth b. Chromatic Dispersion c. Spectral width d. Beamwidth

Last Answer : c. Spectral width

Is the width of the range of wavelengths emitted by the light source ∙ a. Bandwidth ∙ b. Chromatic Dispersion ∙ c. Spectral width ∙ d. Beamwidth

Description : Is the width of the range of wavelengths emitted by the light source ∙ a. Bandwidth ∙ b. Chromatic Dispersion ∙ c. Spectral width ∙ d. Beamwidth

Last Answer : c. Spectral width

Name the two types of intramodal, or chromatic, dispersion.

Description : Name the two types of intramodal, or chromatic, dispersion.

Last Answer : Material dispersion and waveguide dispersion.

Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder (C) The wavelength corresponding to maximum mono-chromatic emissive power increases with rise in temperature (D) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Description : Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate ... ) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Last Answer : (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder

Chromatic dispersion is also called ____________________ dispersion.

Description : Chromatic dispersion is also called ____________________ dispersion.

Last Answer : intramodal

It is caused by the difference in the propagation time of light rays that take different paths down the fiber. ∙ A. modal dispersion ∙ B. microbending ∙ C. Rayleigh scattering ∙ D. chromatic dispersion

Description : It is caused by the difference in the propagation time of light rays that take different paths down the fiber. ∙ A. modal dispersion ∙ B. microbending ∙ C. Rayleigh scattering ∙ D. chromatic dispersion

Last Answer : A. modal dispersion

Chromatic dispersion can be eliminated by __________. ∙ A. using a monochromatic light source ∙ B. using a very small numerical aperture fiber ∙ C. using a graded-index fiber ∙ D. using a very sensitive photo detector

Description : Chromatic dispersion can be eliminated by __________. ∙ A. using a monochromatic light source ∙ B. using a very small numerical aperture fiber ∙ C. using a graded-index fiber ∙ D. using a very sensitive photo detector

Last Answer : A. using a monochromatic light source

The effect of a large magnitude of the numerical aperture ∙ A. The amount of external light the fiber will accept is greater. ∙ B. The amount of external light the fiber will accept is less. ∙ C. The amount of modal dispersion will be less. ∙ D. The amount of chromatic dispersion will be greater.

Description : The effect of a large magnitude of the numerical aperture ∙ A. The amount of external light the fiber will accept is greater. ∙ B. The amount of external light the fiber will accept is less. ... The amount of modal dispersion will be less. ∙ D. The amount of chromatic dispersion will be greater.

Last Answer : The amount of external light the fiber will accept is greater.

A single-mode cable does not suffer from: a. modal dispersion b. chromatic dispersion c. waveguide dispersion d. all of the above

Description : A single-mode cable does not suffer from: a. modal dispersion b. chromatic dispersion c. waveguide dispersion d. all of the above

Last Answer : a. modal dispersion

In addition to recovery time, what determines the minimum range of a radar set?

Description : In addition to recovery time, what determines the minimum range of a radar set?

Last Answer : Pulse width

When the frequency is decreased so that two quarter wavelengths are longer than the "a" (wide) dimension of the waveguide, what will happen?

Description : When the frequency is decreased so that two quarter wavelengths are longer than the "a" (wide) dimension of the waveguide, what will happen?

Last Answer : Energy will no longer pass through the waveguide.

What unit is used to measure the different wavelengths of light?

Description : What unit is used to measure the different wavelengths of light?

Last Answer : Angstrom unit.

Delay differences between the source wavelengths occur as the optical signal propagates along the fiber. What is this called?

Description : Delay differences between the source wavelengths occur as the optical signal propagates along the fiber. What is this called?

Last Answer : Differential group delay t(l).

Silica (pure glass) fibers are used because of their low intrinsic material absorption at the wavelengths of operation. This wavelength of operation is between two intrinsic absorption regions. What are these two regions called? What are the wavelengths of operation for these two regions?

Description : Silica (pure glass) fibers are used because of their low intrinsic material absorption at the wavelengths of operation. This wavelength of operation is between two intrinsic absorption regions. What are these two regions called? What are the wavelengths of operation for these two regions?

Last Answer : Ultraviolet absorption region (below 400 nm) and infrared absorption region (above 2000 nm).

Modes that are bound at one wavelength may not exist at longer wavelengths. What is the wavelength at which a mode ceases to be bound called?

Description : Modes that are bound at one wavelength may not exist at longer wavelengths. What is the wavelength at which a mode ceases to be bound called?

Last Answer : Cutoff wavelength

In a dual-speed synchro system what determines the two specific speeds at which the data will be transmitted?

Description : In a dual-speed synchro system what determines the two specific speeds at which the data will be transmitted?

Last Answer : The gear ratio between the two transmitters.

Thermal radiation is an electromagnetic radiation with wavelengths in _____ range.  A. 1 to 100 µm  B. 0.1 to 100 µm  C. 0.1 to 10 µm  D. 10 to 100 µm

Description : Thermal radiation is an electromagnetic radiation with wavelengths in _____ range.  A. 1 to 100 µm  B. 0.1 to 100 µm  C. 0.1 to 10 µm  D. 10 to 100 µm

Last Answer : 0.1 to 100 µm

Range of wavelengths of ultraviolet ∙ A. 670 nm to 10^3 nm ∙ B. 440 nm to 540 nm ∙ C. 110 nm to 240 nm ∙ D. 10 nm to 390 nm

Description : Range of wavelengths of ultraviolet ∙ A. 670 nm to 10^3 nm ∙ B. 440 nm to 540 nm ∙ C. 110 nm to 240 nm ∙ D. 10 nm to 390 nm

Last Answer : D. 10 nm to 390 nm

Range of wavelengths of ultraviolet

Description : Range of wavelengths of ultraviolet

Last Answer : 10 nm to 390 nm

What is the difference between calculating impedance in a series ac circuit and in a parallel ac circuit?

Description : What is the difference between calculating impedance in a series ac circuit and in a parallel ac circuit?

Last Answer : In a series circuit impedance is calculated from the values of resistance and reactance. In a parallel circuit, the values of resistive current and reactive current must be used to calculate total impedance.

What is the formula for calculating reactive power?

Description : What is the formula for calculating reactive power?

Last Answer : Reactive Power = (IX)2X

What is the formula for calculating true power?

Description : What is the formula for calculating true power?

Last Answer : True Power = (IR)2R

Which computer has the faster calculating speeds, the variable-word-length or the fixed-word-length?

Description : Which computer has the faster calculating speeds, the variable-word-length or the fixed-word-length?

Last Answer : Fixed-word-length.

Light travels faster in a material with a lower refractive index. Therefore, light rays that travel a longer distance in a lower refractive index travel at a greater average velocity. What effect does this have on multimode graded-index fiber modal dispersion and bandwidth?

Description : Light travels faster in a material with a lower refractive index. Therefore, light rays that travel a longer distance in a lower refractive index travel at a greater average velocity. What effect does this have on multimode graded-index fiber modal dispersion and bandwidth?

Last Answer : Decreases the time difference between light rays, which reduces modal dispersion and increases fiber bandwidth.

Which dispersion mechanism (material or waveguide) is a function of the size of the fiber's core relative to the wavelength of operation?

Description : Which dispersion mechanism (material or waveguide) is a function of the size of the fiber's core relative to the wavelength of operation?

Last Answer : Waveguide dispersion.

Modal dispersion affects the bandwidth of multimode systems. It is essential to adjust what three fiber properties to maximize system bandwidth?

Description : Modal dispersion affects the bandwidth of multimode systems. It is essential to adjust what three fiber properties to maximize system bandwidth?

Last Answer : Core diameter, NA, and index profile properties.

The band of seven colours obtained due to the dispersion of white light is called?

Description : The band of seven colours obtained due to the dispersion of white light is called?

Last Answer : Visible Spectrum

Natural rubber is obtained from latex, which is a colloidal dispersion of rubber in water. Which of the following is used as a coagulant in latex? (A) Ammonium alum (B) Potassium alum(C) Both ‘a’ & ‘b’(D) Neither ‘a’ nor ‘b

Description : Natural rubber is obtained from latex, which is a colloidal dispersion of rubber in water. Which of the following is used as a coagulant in latex? (A) Ammonium alum (B) Potassium alum (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b

Last Answer : (C) Both ‘a’ & ‘b

What is the root word for chromatic?

Description : What is the root word for chromatic?

Last Answer : Feel Free to Answer

A lens or combination of lenses in which the following defect is completely eliminated is called aplanatic (A) Spherical aberration (B) Chromatic aberration (C) Coma (D) Astigmatism

Description : A lens or combination of lenses in which the following defect is completely eliminated is called aplanatic (A) Spherical aberration (B) Chromatic aberration (C) Coma (D) Astigmatism

Last Answer : (A) Spherical aberration

The defect of a lens whereby rays of white light proceeding from a point get dispersed into their components and conveyed to various foci, forming a blurred and coloured image is known as (A) Chromatic aberration (B) Spherical aberration (C) Astigmatism (D) Coma

Description : The defect of a lens whereby rays of white light proceeding from a point get dispersed into their components and conveyed to various foci, forming a blurred and coloured image is known as (A) Chromatic aberration (B) Spherical aberration (C) Astigmatism (D) Coma

Last Answer : (A) Chromatic aberration

In Michelson interferometer semi silvered mirror is used To obtain __________. A. Thin film interference B. Phase coherence C. mono chromatic light D. colored fringe

Description : In Michelson interferometer semi silvered mirror is used To obtain __________. A. Thin film interference B. Phase coherence C. mono chromatic light D. colored fringe

Last Answer : B. Phase coherence

Refracting telescopes, if uncorrected, suffer from chromatic aberration. Chromatic aberration occurs because: w) red light is focused more strongly than blue light x) blue light is focused more strongly than red light y) the outer light rays are focused more strongly than the central rays, z) the central light rays are focused more strongly than the outer rays.

Description : Refracting telescopes, if uncorrected, suffer from chromatic aberration. Chromatic aberration occurs because: w) red light is focused more strongly than blue light x) blue light is focused more strongly than ... central rays, z) the central light rays are focused more strongly than the outer rays.

Last Answer : ANSWER: X -- BLUE LIGHT IS FOCUSED MORE STRONGLY THAN RED LIGHT 

Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in the tubes of natural circulation evaporators is in the range of 0.3 to 0.9 metre/second (C) Duhring's plot is used for calculating the concentration of solution (D) In a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Last Answer : (C) Duhring's plot is used for calculating the concentration of solution

What determines the frequency, bandwidth, and power handling capability of a waveguide probe?

Description : What determines the frequency, bandwidth, and power handling capability of a waveguide probe?

Last Answer : Size and shape

A refracted wave occurs when a wave passes from one medium into another medium. What determines the angle of refraction?

Description : A refracted wave occurs when a wave passes from one medium into another medium. What determines the angle of refraction?

Last Answer : The density of the two mediums, and the velocity of the waves.

What determines whether these components are considered series or shunt?

Description : What determines whether these components are considered series or shunt?

Last Answer : . The relationship of the components to the output-signal path.

Which quantity (voltage or current) determines the intensity of an electrical shock?

Description : Which quantity (voltage or current) determines the intensity of an electrical shock?

Last Answer : Current.

What determines whether a differential synchro adds or subtracts?

Description : What determines whether a differential synchro adds or subtracts?

Last Answer : The way the differential synchro is connected in a system is the deciding factor on whether the unit adds or subtracts its inputs.

the voltage drop across RS and R1 determines the amount of base-emitter ____ for Q1.

Description : the voltage drop across RS and R1 determines the amount of base-emitter ____ for Q1.

Last Answer : Bias.

What determines the rate of discharge of the capacitor in a filter circuit?

Description : What determines the rate of discharge of the capacitor in a filter circuit?

Last Answer : Value of capacitance and load resistance.

What determines the chemical activity of an atom?

Description : What determines the chemical activity of an atom?

Last Answer : The number of electrons in the valence shell.

What factor determines whether a radio wave is reflected or refracted by the ionosphere?

Description : What factor determines whether a radio wave is reflected or refracted by the ionosphere?

Last Answer : Thickness of ionized layer.

In an externally synchronized radar, what determines the prr of the transmitter?

Description : In an externally synchronized radar, what determines the prr of the transmitter?

Last Answer : The master oscillator.

What factor determines the difference between the transmitted frequency and the received frequency in an fm transmitter?

Description : What factor determines the difference between the transmitted frequency and the received frequency in an fm transmitter?

Last Answer : Travel time.

. What determines the rate of discharge of the capacitor in a filter circuit?

Description : . What determines the rate of discharge of the capacitor in a filter circuit?

Last Answer : Value of capacitance and load resistance

The profile parameter (α) determines the shape of the multimode graded-index core's refractive index profile. As the value of the aincreases, how does the core's profile change?

Description : The profile parameter (α) determines the shape of the multimode graded-index core's refractive index profile. As the value of the aincreases, how does the core's profile change?

Last Answer : From a triangular shape to step.

What is the main factor that determines receiver sensitivity?

Description : What is the main factor that determines receiver sensitivity?

Last Answer : Noise

What determines the shape and size of a soldering iron tip?

Description : What determines the shape and size of a soldering iron tip?

Last Answer : The type of work to be done.

What determines the frequency of a tunnel-diode oscillator?

Description : What determines the frequency of a tunnel-diode oscillator?

Last Answer : The tuned circuit or cavity frequency.