What is the formula for calculating reactive power?

What is the formula for calculating reactive power?
by

1 Answer

Answer :

Reactive Power = (IX)2X
by

Related questions

What is the formula for calculating true power?

Description : What is the formula for calculating true power?

Last Answer : True Power = (IR)2R

What is the unit of measurement of reactive power?

Description : What is the unit of measurement of reactive power?

Last Answer : var.

What is the reactive power in an ac circuit?

Description : What is the reactive power in an ac circuit?

Last Answer : Reactive power is the power returned to the source by the reactive components of the circuit.

What is the formula for reactive power?

Description : What is the formula for reactive power?

Last Answer : The formula for reactive power is, Reactive power = VI sin (phi) The unit of reactive power is VAR ( Volt ampere reactive). The reactive power is denoted by 'Q'. The formula for real power is, Real power = VI cos (phi) The unit of real power is watts. The real power is denoted by 'P'.

What is the difference between calculating impedance in a series ac circuit and in a parallel ac circuit?

Description : What is the difference between calculating impedance in a series ac circuit and in a parallel ac circuit?

Last Answer : In a series circuit impedance is calculated from the values of resistance and reactance. In a parallel circuit, the values of resistive current and reactive current must be used to calculate total impedance.

What determines the range of wavelengths over which meaningful data is obtained for calculating the chromatic dispersion?

Description : What determines the range of wavelengths over which meaningful data is obtained for calculating the chromatic dispersion?

Last Answer : The wavelength range of the optical source(s) used.

Which computer has the faster calculating speeds, the variable-word-length or the fixed-word-length?

Description : Which computer has the faster calculating speeds, the variable-word-length or the fixed-word-length?

Last Answer : Fixed-word-length.

What is the formula for calculating velocity?

Description : What is the formula for calculating velocity?

Last Answer : Answer: Velocity = Distance ÷ Time

Is there an Excel formula for calculating a length of time and converting it to decimals?

Description : Is there an Excel formula for calculating a length of time and converting it to decimals?

Last Answer : answer:If you are keeping time to the quarter hour, then the decimals are really decimals: i.e., hundredths of an hour. So you don't need a formula. It's simple subtraction, the same ... as you stick to quarter hours and use decimals, those numbers are great tools for several work-related purposes.

What is the simple formula for calculating Infiltration Rates?

Description : What is the simple formula for calculating Infiltration Rates?

Last Answer : I would say use the mm/min equation then multiply by 60 to get the mm/hour.

What is the formula for calculating the rate of water escaping through a hole in a pipe?

Description : What is the formula for calculating the rate of water escaping through a hole in a pipe?

Last Answer : answer:I’m not entirely sure if this is what you are looking for, but it may be helpful. http://www.1728.com/flowrate.htm Scroll down past the calculator to the flow rate equation (# 3). Again, not sure if it’s exactly what you are looking for, but maybe you’ll get something out of it.

In the formula for calculating interest the principal is multiplied by the rate and then multiplied by the?

Description : In the formula for calculating interest the principal is multiplied by the rate and then multiplied by the?

Last Answer : time

What is the formula for calculating BMI for weight loss?

Description : What is the formula for calculating BMI for weight loss?

Last Answer : Simply stated BMI a measure of body fat based on height and weight. The actual calculation is Body mass index is defined as an individual's body weight divided by the square of their ... the calculation variations for using metric or non metric numbers. http://en.wikipedia.org/wiki/Body_mass_index

What is the formula for calculating a reverse mortgage?

Description : What is the formula for calculating a reverse mortgage?

Last Answer : Getting the reverse mortgage on your home entails finding the area the home is located, the amount of the mortgage owed on the home, and the estimate of the home value. It usually helps elderly clients if their home value is significantly more than the mortgage owed, if any.

In Chezy’s formula V = C rs for calculating the velocity of flow in circular sewer of diameter running full, the value of hydraulic mean radius is A. D B. D /2 C. D/3 D. D/4

Description : In Chezy’s formula V = C rs for calculating the velocity of flow in circular sewer of diameter running full, the value of hydraulic mean radius is A. D B. D /2 C. D/3 D. D/4

Last Answer : ANS: D

Formula for calculating leaf area index is — a. Total leaf area / Ground area b. Ground area / Total leaf area c. Total plant area / Ground aread. Ground area / Total plant area

Description : Formula for calculating leaf area index is — a. Total leaf area / Ground area b. Ground area / Total leaf area c. Total plant area / Ground area d. Ground area / Total plant area

Last Answer : a. Total leaf area / Ground area

Formula for calculating cotton ginning percentage is a. Weight of cotton seed / weight of cotton lint x 100 b. Weight of cotton lint / weight of seed cotton x 100 c. Weight of cotton lint x weight of seed cotton d. Weight of cotton lint x weight of seed cotton / 100

Description : Formula for calculating cotton ginning percentage is a. Weight of cotton seed / weight of cotton lint x 100 b. Weight of cotton lint / weight of seed cotton x 100 c. Weight of cotton lint x weight of seed cotton d. Weight of cotton lint x weight of seed cotton / 100

Last Answer : b. Weight of cotton lint / weight of seed cotton x 100

For calculating the allowable stress of long columns. The empirical formula 0 y/n) (1 - a l/r), is known as (A) Straight line formula (B) Parabolic formula (C) Perry's formula (D) Rankine's formula

Description : For calculating the allowable stress of long columns. The empirical formula 0 y/n) (1 - a l/r), is  known as  (A) Straight line formula  (B) Parabolic formula  (C) Perry's formula  (D) Rankine's formula 

Last Answer : (A) Straight line formula 

For calculating the permissible stress 0 y /[(1 + a(l/r)²]is the empirical formula, known as (A) Straight line formula (B) Parabolic formula (C) Perry's formula (D) Rankine's formula

Description : For calculating the permissible stress 0 y /[(1 + a(l/r)²]is the empirical formula, known as  (A) Straight line formula  (B) Parabolic formula  (C) Perry's formula  (D) Rankine's formula 

Last Answer : (D) Rankine's formula 

For calculating the allowable stress of long columns 0 y/n [1 - a (1/r)²]is the empirical formula, known as (A) Straight line formula (B) Parabolic formula (C) Perry's formula (D) Rankine's formula

Description : For calculating the allowable stress of long columns 0 y/n [1 - a (1/r)²]is the empirical formula,  known as  (A) Straight line formula  (B) Parabolic formula  (C) Perry's formula  (D) Rankine's formula 

Last Answer : (B) Parabolic formula 

For calculating the evaporation rate over a reservoir surface E = 0.771 (1.465 - 0.00732B) (0.44 - 0.007375 V) (pe - pa), the equation is given by (A) Roohwer's, formula in M.K.S. (B) Roohwer's formula in F.P.S. (C) Dalton's formula in F.P.S. (D) Dalton's formula in M.K.S

Description : For calculating the evaporation rate over a reservoir surface E = 0.771 (1.465 - 0.00732B) (0.44 - 0.007375 V) (pe - pa), the equation is given by (A) Roohwer's, formula in M.K.S. (B) Roohwer's formula in F.P.S. (C) Dalton's formula in F.P.S. (D) Dalton's formula in M.K.S

Last Answer : Answer: Option A

The correct formula for calculating super-elevation for the hill roads, is (A) e = V²/254 R (B) e = V²/225 R (C) e = V²/278 R (D) e = V²/114 R

Description : The correct formula for calculating super-elevation for the hill roads, is (A) e = V²/254 R (B) e = V²/225 R (C) e = V²/278 R (D) e = V²/114 R

Last Answer : Answer: Option B

The formula for calculating the depth of concrete pavements suggested by Gold beck, is (A) d = 3W/ max (B) d W/ max) (C) d W/ max) (D) d W/ max)

Description : The formula for calculating the depth of concrete pavements suggested by Gold beck, is (A) d = 3W/ max (B) d W/ max) (C) d W/ max) (D) d W/ max)

Last Answer : Answer: Option B

Write formula for calculating Break-even point?

Description : Write formula for calculating Break-even point?

Last Answer : Ans:Break even point=total fixed cost/selling price-variable cost

Formula for calculating Material cost variance = ________ a) (SQ*SR) – (AQ* AR b) AQ (SP-AP) c) SP(SQ- RSQ) d) SP(SQ-AQ)

Description : Formula for calculating Material cost variance = ________ a) (SQ*SR) – (AQ* AR b) AQ (SP-AP) c) SP(SQ- RSQ) d) SP(SQ-AQ)

Last Answer : a) (SQ*SR) – (AQ* AR

The total power in both series and parallel circuits is computed with the formula: PT = P1 + P2 + P3 +...Pn. Why can this formula be used for both series and parallel circuits?

Description : The total power in both series and parallel circuits is computed with the formula: PT = P1 + P2 + P3 +...Pn. Why can this formula be used for both series and parallel circuits?

Last Answer : In both cases all the power used in the circuit must come from the source.

Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder (C) The wavelength corresponding to maximum mono-chromatic emissive power increases with rise in temperature (D) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Description : Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate ... ) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Last Answer : (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder

Most important method for calculating discharge for planning a water supply project, is (A) Velocity area method (B) Weir or spillway method (C) Use of venturi-meter (D) Using power plant consumption

Description : Most important method for calculating discharge for planning a water supply project, is  (A) Velocity area method  (B) Weir or spillway method  (C) Use of venturi-meter  (D) Using power plant consumption 

Last Answer : (A) Velocity area method

What is the formula for GAMMA (γ)?

Description : What is the formula for GAMMA (γ)?

Last Answer : The substitution method.

What is the formula for determining total reactance in a series circuit where the values of XC and XL are known?

Description : What is the formula for determining total reactance in a series circuit where the values of XC and XL are known?

Last Answer : X = XL – XC or X = XC - XL

What is the formula used to compute the value of this opposition?

Description : What is the formula used to compute the value of this opposition?

Last Answer : XL = 2πfL.

What is the formula used to determine the gain of an amplifying device?

Description : What is the formula used to determine the gain of an amplifying device?

Last Answer : Gain = output ÷ input.

What is the mathematical formula for computing the output voltage from a moving coil in a magnetic field?

Description : What is the mathematical formula for computing the output voltage from a moving coil in a magnetic field?

Last Answer : 8. e = Emax sine θ.

What is Reactive Power ?

Description : What is Reactive Power ?

Last Answer : The product of the voltage of the AC circuit and the product of the reactive current or the vertical component of the current is called reactive power.

As shown in the illustration, the function of the switch labeled 'PFSW' is to determine the ______________. EL-0003 A. bus frequency B. reactive volt amperes of the bus C. frequency of either generator D. power factor of either generator

Description : As shown in the illustration, the function of the switch labeled 'PFSW' is to determine the ______________. EL-0003 A. bus frequency B. reactive volt amperes of the bus C. frequency of either generator D. power factor of either generator

Last Answer : Answer: D

The energy consumed by an AC motor, as strictly reactive power, is _____________. A. used to do mechanical work B. used to establish the magnetic field of the motor C. lost as heat generated by the windings D. lost in doing work to turn the motor itself

Description : The energy consumed by an AC motor, as strictly reactive power, is _____________. A. used to do mechanical work B. used to establish the magnetic field of the motor C. lost as heat generated by the windings D. lost in doing work to turn the motor itself

Last Answer : Answer: B

The reactive power drawn by a motor from an AC generator is the power which is _____________. A. used to establish the magnetic field of the motor B. lost in overcoming friction in the bearings C. strictly converted to heat generated by current flow through the windings D. transmitted directly through the rotor shaft to perform useful work

Description : The reactive power drawn by a motor from an AC generator is the power which is _____________. A. used to establish the magnetic field of the motor B. lost in overcoming friction in the ... by current flow through the windings D. transmitted directly through the rotor shaft to perform useful work

Last Answer : Answer: A

Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. C. Inductive reactance varies directly with the frequency and the inductance. D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Description : Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. ... . D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Last Answer : Answer: C

Complete maintenance of electrical motors should include periodic checks for machine _____________. A. vibration B. watertight integrity C. speed droop D. reactive power

Description : Complete maintenance of electrical motors should include periodic checks for machine _____________. A. vibration B. watertight integrity C. speed droop D. reactive power

Last Answer : Answer: A

The apparent power in a purely inductive circuit is also known as _____________. A. true power B. lead power C. induced power D. reactive power

Description : The apparent power in a purely inductive circuit is also known as _____________. A. true power B. lead power C. induced power D. reactive power

Last Answer : Answer: D

What will be the reactive power and bus voltage whan the generator bus is treated as load bus.

Description : What will be the reactive power and bus voltage whan the generator bus is treated as load bus.

Last Answer : When the generator bus is treated as load bus, the reactive power of the bus is equated to the limit it has violated, and the previous iteration value of bus voltage is used for calculating current iteration value.

What is purpose of reactive power (VAR)?

Description : What is purpose of reactive power (VAR)?  

Last Answer : It is an energy required to built up magnetic field to drive the power.  

Illustrate how can you use a single-phase wattmeter to measure 3 phase reactive power in a circuit?

Description : Illustrate how can you use a single-phase wattmeter to measure 3 phase reactive power in a circuit?

Last Answer : We can measure reactive power of 3 phase circuit by dingle phase wattmeter by connecting the current coil in series with a line or load and connecting the pressure coil across the other two lines.  Reactive power = 3√ V * I * sinϕ Watts. 

Explain the terms real power, apparent power and reactive power for ac circuits and also the units used.

Description : Explain the terms real power, apparent power and reactive power for ac circuits and also the units used.

Last Answer : Real Power: It is the product of voltage, current and power factor i.e. P = V I cos j and basic unit of real power is watt. i.e. Expressed as W or kW. Apparent power: It is the product of ... X current X sinj or Reactive power = V I sin j and has no other unit but expressed in VAR or KVAR.

The voltage of a particular bus can be controlled by controlling the a) Active power of the bus b) Reactive power of the bus c) Phase angle d) All of the above

Description : The voltage of a particular bus can be controlled by controlling the a) Active power of the bus b) Reactive power of the bus c) Phase angle d) All of the above

Last Answer : b) Reactive power of the bus

In a load flow analysis of a power system, the load connected at a bus is represented as a) Constant current drawn from the bus b) Constant impedance connected at the bus c) Voltage and frequency dependent sources at the boss d) Constant real and reactive power drawn from the bus

Description : In a load flow analysis of a power system, the load connected at a bus is represented as a) Constant current drawn from the bus b) Constant impedance connected at the bus c) Voltage and frequency dependent sources at the boss d) Constant real and reactive power drawn from the bus

Last Answer : d) Constant real and reactive power drawn from the bus

In power system, if a voltage controlled bus is treated as a load bus then which one of the following limits would be violated? a) Voltage b) Active power c) reactive power d) Phase angle

Description : In power system, if a voltage controlled bus is treated as a load bus then which one of the following limits would be violated? a) Voltage b) Active power c) reactive power d) Phase angle

Last Answer : a) Voltage

In load flow studies of a power system, a voltage control bus is specified by a) Real power and reactive power b) Reactive power and voltage magnitude c) Voltage and voltage phase angle d) Real power and voltage magnitude

Description : In load flow studies of a power system, a voltage control bus is specified by a) Real power and reactive power b) Reactive power and voltage magnitude c) Voltage and voltage phase angle d) Real power and voltage magnitude

Last Answer : d) Real power and voltage magnitude

The thickness of the layer of insulation on the conductor, in cables, depends upon (a) Reactive power (b) Power factor (c) Voltage (d) Current carrying capacity

Description : The thickness of the layer of insulation on the conductor, in cables, depends upon (a) Reactive power (b) Power factor (c) Voltage (d) Current carrying capacity

Last Answer : (c) Voltage