In what direction will a gyro precess in response to an  outside force?

1 Answer

Answer :

Perpendicular (90º) to the force.

Related questions

Description : What factor determines the direction a gyro will precess in response to a particular force?

Last Answer : Direction of spin.

Description : What type of force acts ONLY through the center of gravity of a gyro, and does NOT cause precession?

Last Answer : Force of translation.

Description : What type(s) of force does a gyro resist?

Last Answer : Any force that attempts to tilt the spin axis.

Description : What gyro characteristic provides the basis of the operation of a rate gyro?

Last Answer : Precession.

Description : How many degrees-of-freedom does a rate gyro usually have?

Last Answer : One.

Description : What is the purpose of rotating the gimbal assembly in a gyro using a mercury erection system?

Last Answer : Applies torque at the proper point for correct precession.

Description : What is the purpose of an erection system used with a gyro?

Last Answer : To achieve and maintain the proper operating position for the gyro (usually vertical or horizontal).

Description : What are the three causes of mechanical drift in a gyro?

Last Answer : Unbalanced gyro, inertia of gimbals, bearing friction

Description : If a free gyro is placed at the equator at 1200 in a vertical position; in what position should it be at 1800?

Last Answer : Horizontal.

Description : A universally mounted gyro has how many degrees of freedom?

Last Answer : Two.

Description : Which gyro rotor in figure 3-6, view (A) view (B) view (C), will have the greatest rigidity if all are rotated at the same speed?

Last Answer : C.

Description : What factors determine the rigidity of a gyro?

Last Answer : Rotor speed, weight, shape.

Description : A universally mounted gyro has how many gimbals?

Last Answer : Two.

Description : What gyro property causes the gyro to remain in a fixed position?

Last Answer : Rigidity.

Description : In the drawing in figure 3-1, which axis is the gyro spin axis?

Last Answer : X-axis

Description : What will be the effect upon an electron traveling in the opposite direction to the lines of force in an electrostatic field?

Last Answer : The electron will be accelerated.

Description : In what direction are electrostatic lines of force drawn?

Last Answer : Leaving positive, entering negative

Description : When using the tight-hand rule to determine precession, which finger indicates the direction of the applied force?

Last Answer : Middle finger.

Description : What do you put in your Gyro?

Last Answer : Ooh, maybe some babaganoush if it’s available?

Description : Let's settle this once and for all: How do you pronounce "Gyro"? (Sandwhich)

Last Answer : \ˈyē-ˌrō, ˈzhir-ō\

Description : How do you pronounce gyro?

Last Answer : Jai-row.

Description : I'm wondering if the Huawei p9 lite has this gyro sensor. I want to add VR goggles, and the minimum hardware requirements are that the phone display be at least full HD, with an accelerometer and a gyro sensor. I'm talking about the glasses.      

Last Answer : The Huawei P9 lite has these sensors: Sensors: Fingerprint (rear-mounted), accelerometer, proximity, compass The accelerometer is there, but I can't see the gyroscope. Of course, it's worth checking out if ... think it's in it and I looked at it on the page recommended by the glasses distributor. 

Description : How minutes in one degree of gyro compass?

Last Answer : There are 60 minutes in 1 degree.

Description : What is a Greek Gyro recipe?

Last Answer : A gyro is a wrap that is typically filled with pork, tzatziki, and vegetables. I have never made gyros so all I can suggest is to look on a cooking website or in a cook book.

Description : Does the Nintendo Switch Lite have gyro controls?

Last Answer : Yes, the Switch Lite has a gyroscope and accelerometer.

Description : As shown in the illustrations, fine adjustments such as 'weather' and 'turning rate' have no effect on steering stand operation when the 'operation control switch' is in ____________. EL-0097 A. GYRO B. HAND C. NFU D. DIFF

Last Answer : Answer: C

Description : As shown in the illustrations, feedback or rudder angle repeatback is used by the steering stand in which operational modes? EL-0097 A. Gyro-compass and hand steering only B. Hand steering and non-followup only C. Non-followup and gyro-compass only D. Gyro-compass and synchronizing only

Last Answer : Answer: A

Description : What controls rudder movement when the Operation Selector Switch shown in the illustration is in the 'NFU' position? EL-0097 A. Steering wheel B. Non-followup controller C. Gyro-compass D. Course selector pointer

Last Answer : Answer: B

Description : What controls the rudder when the 'operation selector switch' of the steering stand shown in the illustration is in the 'HAND' position? EL-OO98 A. Non-followup controller B. Gyro-compass C. Course selector pointer D. Steering wheel

Last Answer : Answer: D

Description : What is the highest frequency that can be sent straight upward and be returned to earth? A. MUF B. Gyro frequency C. Skip frequency D. Critical frequency

Last Answer : D. Critical frequency

Description : Highest frequency that can be used for skywave HF communications between two given points on earth. A. Gyro frequency B. Maximum usable frequency C. Critical frequency D. Virtual frequency

Last Answer : B. Maximum usable frequency

Description : Arange ofmicrowave frequenciesmore easilypassed bythe atmospherethan are theothersis called a a.window b. critical frequency c. gyro frequency range d. resonance in the atmosphere

Last Answer : a.window

Description : What component in an amplifier circuit tends to limit the low-frequency response of the amplifier?

Last Answer : The coupling capacitor (C3).

Description : What compone What components What components can be used to increase the high frequency response of an amplifier?

Last Answer : Peaking coils.

Description : What is the major factor that limits the high-frequency response of an amplifier circuits?

Last Answer : The capacitance of the circuit.

Description : What are the factors that limit the frequency response of a transistor amplifier?

Last Answer : The capacitance and inductance of the circuit and the interelectrode capacitance of the transistor.

Description : select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Last Answer : Both the input signal and the feedback signal.

Description : In a properly designed servo system that has an oscillating input (order), what should be the response of the load?

Last Answer : It should oscillate.

Description : Receiver bandwidth is defined as those frequencies spread between what two points of the receiver response curve?

Last Answer : Half-power points.

Description : Where should the transmitter spectrum be located with respect to the receiver response curve?

Last Answer : In the center.

Description : Trade-offs between competing effects are necessary for high speed response. Which competing effect (fast transit time, low capacitance, or high quantum efficiency) requires a thin active area?

Last Answer : Fast transit time.

Description : Should the capacitance of the photodetector be kept small or large to prevent the RC time constant from limiting the response time?

Last Answer : Small

Description : How could you check the phase response of a tape recorder?

Last Answer : Record and reproduce a square wave and see if the output on an oscilloscope is symmetrical.

Description : How should a tape recorder with good phase response reproduce a complex waveform, such as a square wave?

Last Answer : With no distortion

Description : List four factors that can degrade the frequency response of magnetic tape recorders.

Last Answer : a. A too-high or too-low bias signal level setting for the record head. b. An improper reproduce head gap. c. An improper tape transport speed. d. Poor tape-to-head contact.

Description : While measuring frequency response, as the signal generator approaches the lowest and highest frequency the recorder can effectively record, the VTVM reading drops to less than - 3 dB. What does this indicate?

Last Answer : The upper and lower limits of the frequency response specification for that tape recorder.

Description : The frequency-response specification of your tape recorder reads within +/ - 3 dB from 150 Hz to 150 kHz at 60 ips. What does this mean?

Last Answer : The recorder can record all frequencies between 150 Hz and 150 kHz at 60 ips without varying the output amplitude more than 3 dB.

Description : Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Last Answer : Bi-phase level encoding.

Description : What type of temperature coefficient material does not produce increased heat in response to increased current flow?

Last Answer : Zero-temperature coefficient.