State three types of power loss in an inductor.

1 Answer

Answer :

Copper loss; hysteresis loss; eddy-current loss.

Related questions

Description : How does a capacitor and an inductor react to (a) low frequency and (b) high frequency?

Last Answer : At low-frequency, a capacitor acts as an open and an inductor acts as a short. At high-frequency, a capacitor acts as a short and an inductor acts as an open.

Description : What is the term for the number of times per second that tank circuit energy is either stored in the inductor or capacitor?

Last Answer : Natural frequency or resonant frequency (f r).

Description : When the magnetic field of the inductor is completely collapsed, where is the energy of the tank circuit stored?

Last Answer : . Capacitor.

Description : If the inductor and capacitor values are increased, what happens to the resonant frequency?

Last Answer : Decreases.

Description : In an a.c. circuit that contains both an inductor and a capacitor, what term is used for the difference between the individual reactances?

Last Answer : Resultant reactance.

Description : When you are testing an inductor with a Hay bridge, the characteristics of the inductor are compared with what type of device?

Last Answer : A standard capacitor

Description : Which oscillator uses a tapped inductor for feedback?

Last Answer : Hartley.

Description : What is the term for the opposition an inductor presents to ac?

Last Answer : Inductive reactance.

Description : What is the phase relationship between current and voltage in an inductor?

Last Answer : Current lags voltage by 90° (ELI).

Description : What effect does an inductor have on a change in current?

Last Answer : An inductor opposes a change in current.

Description : Is the current flow through an inductor directly proportional or inversely proportional to its inductance value?

Last Answer : Directly proportional.

Description : A Hay bridge measures inductance by comparing an inductor to what component?

Last Answer : A capacitor.

Description : The most inefficient method of voltage reduction, from the standpoint of power loss, even when placed in series with the load, is the use of a/an ____________. A. capacitor B. inductor C. resistor D. transistor

Last Answer : Answer: C

Description : The most inefficient method of voltage reduction from the stand point of power loss, is a/an _____________. A. capacitor in series with the load B. inductor in series with the load C. capacitor and inductor in series with the load D. resistor in series with the load

Last Answer : Answer: D

Description : What are the types of power losses in inductor?

Last Answer : Copper losses, Eddy current loss, and hysteresis loss are the types of power losses in inductor.

Description : Related to inductor state (i) any two types (ii) any two applications 

Last Answer : Ans: i) Types of inductors & their applications:  1) Iron core inductors: Used in Low frequency applications such as filter chokes, amplifiers  2) Air core inductors: Used in high ... frequency upto 100MHz applications such as oscillators, RF amplifiers, Radio and TV receivers, signal generators.

Description : The device shown in the illustration is a/an ____________. EL-0083 A. noise filtering choke B. autotransformer C. fluorescent light ballast D. power factor correction inductor

Last Answer : Answer: B

Description : Find the power of an inductor of 5H and current 4.5A after 2 seconds. a) 25.31 b) 50.62 c) 102.4 d) 204.8

Last Answer : a) 25.31

Description : A pure inductor has power factor of   (a) 1 (b) 1/ 2 (c) 0 (d) None of these 

Last Answer : Zero The current lags behind voltage by 90 degrees in case of a pure inductor  Therefore the power factor = cos{angle between voltage and current}  = cos(90) = 0

Last Answer : Power factor of a pure inductor is Zero.

Description : List the types of materials used in fabricating low-loss, long wavelength optical fibers.

Last Answer : Heavy-metal fluorides, chalcogenide glasses, and crystalline materials.

Description : Microbend loss is caused by microscopic bends of the fiber axis. List three sources of microbend loss.

Last Answer : Uneven coating applications, improper cabling procedures, and external force.

Description : Losses caused by skin effect and the I2R (power) loss are classified as what type of loss?

Last Answer : Copper losses.

Description : Define the loss in optical power through a connection.

Last Answer : loss = 10log

Description : While coupled power and bending loss favor a high D, which Dvalue, smaller or larger, improves fiber bandwidth?

Last Answer : Smaller.

Description : State two functions of slug- tuned inductor and write the expression of self-inductance.

Last Answer : It is kind of variable inductor. The value of inductance increases, when the slug is moved into the coil winding and decreases the resonant frequency. When the slug is moved out of the coil ... decreases and resonant frequency of the tuned circuit increases. Self-inductance (L)= N x φ /I

Description : State the advantages and disadvantages of series inductor and shunt capacitor filter.

Last Answer : Advantages of series inductor filter 1. It has low ripple factor at heavy load currents (i.e. low load resistance) 2. It has no surge current through the diode. 3. It reduces the ripple in the DC ... . 3. It has low output voltages for heavy loads. 4. Ripple factor is dependent on the load.

Description : State the applications and specification of (i) Resistor (ii) Capacitor (iii)Inductor

Last Answer : Application of resistor: 1.Resistors are used in high frequency instrument. 2.Resistor is used in power control circuit. 3.It is used in DC power supplies. 4.Resistors are used ... DC Current  3.Electromagnetic Interference (EMI)  4.Magnetic Saturation Flux Density  5.Curie Temperature 

Last Answer : Inductor discovers motor (Nikola Tesla)

Last Answer : 1. Authentic In the inductor Resistance Zero Is. 2. Pure In the inductor Power Waste Zero. 3. Inductor Of current In change Tied Gives. 4. This Energy Savings By To keep Can 5. Voltage, Of ... flow Tied Gives No. 6. Orientation Of flow Frequency Increase If found Of the inductor Tied Increase Gets.

Description : In the circuit shown in figure switch S is closed at time t=0 At what time current through `3Omega` resistance and 1H inductor are equal?

Last Answer : In the circuit shown in figure switch S is closed at time t=0 At what time current through `3Omega` resistance and ... 5)/(3))` D. `Insqrt((8)/(3))`

Description : In the figure `V_(ab)` versus time graph along an inductor is shown. Match the following

Last Answer : In the figure `V_(ab)` versus time graph along an inductor is shown. Match the following

Description : A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then connected across an inductor of inductance `0.6mH` What is th

Last Answer : A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then ... potential difference across the capacitor is `6.0V` ?

Description : An L-C circuit contains a 0.60 H inductor and a `25muF` capacitor is `3.0xx10^(-5)C?`

Last Answer : An L-C circuit contains a 0.60 H inductor and a `25muF` capacitor is `3.0xx10^(-5)C?`

Description : In a series `LCR` circuit the frequency of a `10 V`, `AC` voltage soure is adjusted in such a fashion that the reactance of the inductor meausers `15

Last Answer : In a series `LCR` circuit the frequency of a `10 V`, `AC` voltage soure is adjusted in such a ... the series combination of `L` and `C`will be:

Description : The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. Total flux linked with the inductor at

Last Answer : The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. ... 10 Wb B. 20 Wb C. 30 Wb D. 40 Wb

Description : The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. The self inductance of the indicator i

Last Answer : The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. The ... B. `0.4` C. `0.1` D. `1.0`

Description : The potentiak difference across a 2H inductor as a function of time is shown in the figure. At time t=0, current is zero. Current versus time graph ac

Last Answer : The potentiak difference across a 2H inductor as a function of time is shown in the figure. At time t=0, ... across the inductor will be A. B. C. D.

Description : The potential difference across a `2 H` inductor as a function of time is shown in figure. At time `t=0`, current is zero Current `t = 2` second is

Last Answer : The potential difference across a `2 H` inductor as a function of time is shown in figure. At time `t=0`, current is ... B. `3 A` C. `4 A` D. `5 A`

Description : What is the opposition to current flow in an AC circuit caused by an inductor called?

Last Answer : Need answer

Description : What is the phase angle of an ohm inductor in series with an ohm resistor connected to a 5 KHz source?

Last Answer : You need to provide values of resistor and inductor etc to find the phase angle.

Description : In a computer is capable to store single binary bit. A) Capacitor B) Flip flop C) Register D) Inductor

Last Answer : Answer : B

Description : Which of the following devices converts electrical energy into mechanical energy? (a) Dynamo (b) Transformer (c) Electric motor (d) Inductor

Last Answer : Ans:(c)

Description : The component used for tuning a radio is basically a variable – (1) Resistor (2) Condenser (3) Inductor (4) Transformer

Last Answer : (2) Condenser Explanation: A tuning capacitor or tuning condenser is a variable capacitor used in an electronic circuit of a radio. It usually connects in parallel to a loop antenna and its capacitance may be intentionally and repeatedly changed mechanically or electronically.

Description : The 'Choke' used with a tube light is basically – (1) an inductor (2) a capacitor (3) a transformer (4) a resistor

Last Answer : (1) an inductor Explanation: In electronics, a choke is an inductor used to block higher-frequency alternating current (AC) in an electrical circuit, while passing lower-frequency or direct ... created by suddenly interrupting the current in choke, which is connected in series with the tubelight.

Description : The device which transfer the signal from low resistance region to high resistance region is – (1) diode (2) transistor (3) capacitor (4) inductor

Last Answer : (2) transistor Explanation: A transistor transfers a signal from a low resistance to high resistance. It has two PN-junctions: one junction is forward biased and other junction is reverse biased ... is introduced in the low resistance, circuit and output is taken from the high resistance circuit.

Description : The electric charge is stored in a device called: (1) Inductor (2) Capacitor (3) Resister (4) Transformer

Last Answer : (2) Capacitor Explanation: A capacitor is a passive twoterminal electronic component that stores electrical energy in an electric field. The effect of a capacitor is known as capacitance.

Description : As shown in the illustration, the generator field is excited with DC current provided by ____________. EL-0016 A. conductors '1', '2' and '3' B. inductor 'L1' C. rectifier 'CR1' D. winding 'S-2'

Last Answer : Answer: C

Description : The symbol shown as figure 'A' represents a/an ____________. EL-0059 A. transformer B. coil C. shunt field D. inductor

Last Answer : Answer: A

Description : To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Last Answer : Answer: A