Description : Increasing the resonant frequency of an end-fed Marconi antenna can be done by A. adding a capacitor in series and reducing the physical length B. adding an inductor in series C. adding an inductor in series D. All of these
Last Answer : A. adding a capacitor in series and reducing the physical length
Description : When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases
Last Answer : D. Antenna resonant frequency increases
Description : How is it possible to lower the resonant frequency of Hertz dipole antenna? A. By reducing the frequency at the transmitter B. By connecting a capacitor in series with the antenna C. By the connecting a resistor in series with the antenna D. By connecting an inductor in series with the antenna
Last Answer : D. By connecting an inductor in series with the antenna
Description : How does a capacitor and an inductor react to (a) low frequency and (b) high frequency?
Last Answer : At low-frequency, a capacitor acts as an open and an inductor acts as a short. At high-frequency, a capacitor acts as a short and an inductor acts as an open.
Description : What is the term for the number of times per second that tank circuit energy is either stored in the inductor or capacitor?
Last Answer : Natural frequency or resonant frequency (f r).
Description : In an a.c. circuit that contains both an inductor and a capacitor, what term is used for the difference between the individual reactances?
Last Answer : Resultant reactance.
Description : What is the effect of adding a capacitor in series with an antenna? A. The antenna’s resonant frequency will increase B. The antenna’s resonant frequency will decrease C. The antenna will be physically 5% longer than its electrical length D. A capacitor is never added in series with an antenna
Last Answer : A. The antenna’s resonant frequency will increase
Description : The resonant frequency of electron wobble can be changed by variation of what force?
Last Answer : The applied magnetic field.
Description : What two variables determine the primary frequency of a resonant cavity?
Last Answer : Size and shape of the cavity.
Description : How will an iris that has portions along both the "a" and "b" dimension walls act at the resonant frequency?
Last Answer : As a shunt resistance.
Description : What is the impedance of a crystal at its resonant frequency when it is used in the series mode?
Last Answer : Minimum.
Description : What is the impedance of a crystal at its resonant frequency when it is used in the parallel mode?
Last Answer : Maximum
Description : What equipment uses a calibrated resonant circuit to measure frequency?
Last Answer : Wavemeter.
Description : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is
Last Answer : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is 500 Hz
Description : If the length of an antenna is changed from 2.5 meters to 2.8 meters, its resonant frequency will A. increase B. depend on the velocity factor so the resonant frequency can either be increased or decreased C. will be unchanged D. decrease
Last Answer : D. decrease
Description : If the length of a Hertz dipole is decreased A. its resonant frequency will be lowered its distributed inductance will be increased B. its distributed inductance will be decreased C. its ... frequency will be increased D. its distributed capacitance between the antenna and ground will be increased.
Last Answer : C. its resonant frequency will be increased
Description : What happens to the bus bar dimensions of the waveguide when the frequency is increased?
Last Answer : The bus bar becomes wider.
Description : A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then connected across an inductor of inductance `0.6mH` What is th
Last Answer : A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then ... potential difference across the capacitor is `6.0V` ?
Description : An L-C circuit contains a 0.60 H inductor and a `25muF` capacitor is `3.0xx10^(-5)C?`
Last Answer : An L-C circuit contains a 0.60 H inductor and a `25muF` capacitor is `3.0xx10^(-5)C?`
Description : In a computer is capable to store single binary bit. A) Capacitor B) Flip flop C) Register D) Inductor
Last Answer : Answer : B
Description : The 'Choke' used with a tube light is basically – (1) an inductor (2) a capacitor (3) a transformer (4) a resistor
Last Answer : (1) an inductor Explanation: In electronics, a choke is an inductor used to block higher-frequency alternating current (AC) in an electrical circuit, while passing lower-frequency or direct ... created by suddenly interrupting the current in choke, which is connected in series with the tubelight.
Description : The device which transfer the signal from low resistance region to high resistance region is – (1) diode (2) transistor (3) capacitor (4) inductor
Last Answer : (2) transistor Explanation: A transistor transfers a signal from a low resistance to high resistance. It has two PN-junctions: one junction is forward biased and other junction is reverse biased ... is introduced in the low resistance, circuit and output is taken from the high resistance circuit.
Description : The electric charge is stored in a device called: (1) Inductor (2) Capacitor (3) Resister (4) Transformer
Last Answer : (2) Capacitor Explanation: A capacitor is a passive twoterminal electronic component that stores electrical energy in an electric field. The effect of a capacitor is known as capacitance.
Description : The most inefficient method of voltage reduction, from the standpoint of power loss, even when placed in series with the load, is the use of a/an ____________. A. capacitor B. inductor C. resistor D. transistor
Last Answer : Answer: C
Description : The most inefficient method of voltage reduction from the stand point of power loss, is a/an _____________. A. capacitor in series with the load B. inductor in series with the load C. capacitor and inductor in series with the load D. resistor in series with the load
Last Answer : Answer: D
Description : To electrically decrease the length of an antenna. A. add an inductor in series B. add an inductor in parallel C. add a resistor in series D. add a capacitor in series
Last Answer : D. add a capacitor in series
Description : Increasing the electrical length of an antenna means A. add an inductor in parallel B. add a capacitor in series C. add an inductor series D. add a resistor is series
Last Answer : C. add an inductor series
Description : Device used to store energy in electrical circuits is A. resistor B. inductor C. capacitor D. diode
Last Answer : capacitor
Description : insulator which is placed between 2 plates of capacitor isA. electric B. dielectric C. inductor D. resistor
Last Answer : dielectric
Description : In a Computer_________ is capable to store single binary bit. 1) Capacitor 2) Flip Flop 3) Register 4) Inductor
Last Answer : 2) Flip Flop
Description : In a Computer_________ is capable to store single binary bit. 1 Capacitor 2 Flip Flop 3 Register 4 Inductor
Last Answer : 2 Flip Flop
Description : P-n junction when reversed biased acts as a (a) Capacitor (b) inductor (c) on switch (d) off switch
Last Answer : d) off switch
Description : State the advantages and disadvantages of series inductor and shunt capacitor filter.
Last Answer : Advantages of series inductor filter 1. It has low ripple factor at heavy load currents (i.e. low load resistance) 2. It has no surge current through the diode. 3. It reduces the ripple in the DC ... . 3. It has low output voltages for heavy loads. 4. Ripple factor is dependent on the load.
Description : Draw the symbol of i) Iron core inductor ii) variable capacitor iii) resistor iv) Ferrite core inductor
Last Answer : Iron core inductor: Ferrite core inductor:
Description : The ‘Choke’ used with a tube light is basically (1) an inductor (2) a capacitor (3) a transformer (4) a resistor
Last Answer : an inductor
Description : The device which transfer the signal from low resistance region to high resistance region is (1) diode (2) transistor (3) capacitor (4) inductor
Last Answer : transistor
Description : State the applications and specification of (i) Resistor (ii) Capacitor (iii)Inductor
Last Answer : Application of resistor: 1.Resistors are used in high frequency instrument. 2.Resistor is used in power control circuit. 3.It is used in DC power supplies. 4.Resistors are used ... DC Current 3.Electromagnetic Interference (EMI) 4.Magnetic Saturation Flux Density 5.Curie Temperature
Description : An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor of the circuit is : (A) 100/11 (B) 11/100 (C) 110 (D) 1000
Last Answer : An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor of the circuit is : 100/11
Description : state what happens to the electrons in a capacitor circuit when (a) the capacitor is charging and (b) the capacitor is discharging.
Last Answer : a. When the capacitor is charging, electrons accumulate on the negative plate and leave the positive plate until the charge on the capacitor is equal to the battery voltage. b. When the ... the negatively charged plate to the positively charged plate until the charge on each plate is neutral.
Description : One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency ... capacitor in the oscillator D. Loose connections in the oscillator, amplifier, or antenna circuits.
Last Answer : D. Loose connections in the oscillator, amplifier, or antenna circuits.
Description : Inductive tuning of a resonant cavity is accomplished by placing a nonmagnetic slug in what area?
Last Answer : The area of maximum H lines.
Description : What is the band of frequencies called that is included between the two points at which current falls to 70 percent of its maximum value in a resonant circuit?
Last Answer : Bandwidth of the circuit
Description : In a parallel-resonant circuit, what is the relationship between impedance and current?
Last Answer : Maximum impedance, minimum current.
Description : . In an "ideal" resonant circuit, what is the relationship between impedance and current?
Last Answer : Impedance low Current high.
Description : . A non-resonant line is a line that has no standing waves of current and voltage on it and is considered to be flat. Why is this true?
Last Answer : The load impedance of such a line is equal to Z0.
Description : Without strapping, the resonant cavities of a hole-and-slot anode are connected in what manner?
Last Answer : Series.
Description : A cylindrical copper block with resonant cavities around the circumference is used as what component of a magnetron?
Last Answer : Anode or plate
Description : Where do the maximum current and minimum voltage values on a resonant Hertz dipole exist? A. Center of the antenna B. Near the end of the antenna C. Near the center of the antenna D. Ends of the antenna
Last Answer : A. Center of the antenna
Description : When the magnetic field of the inductor is completely collapsed, where is the energy of the tank circuit stored?
Last Answer : . Capacitor.
Description : When you are testing an inductor with a Hay bridge, the characteristics of the inductor are compared with what type of device?
Last Answer : A standard capacitor