What is the unit of measurement of apparent power?

Question

What is the unit of measurement of apparent power?

asked Aug 19, 2021 by anonymous

1 Answer

Related questions

What is the unit of measurement of reactive power?

Description : What is the unit of measurement of reactive power?

Last Answer : var.

What is the unit of measurement of true power?

Description : What is the unit of measurement of true power?

Last Answer : var.

What is the apparent power

Description : What is the apparent power

Last Answer : The power that appears to the source because of circuit impedance, or the combination of the power and reactive power.

What unit of measurement refers to the torque of a synchro transmitter

Description : What unit of measurement refers to the torque of a synchro transmitter

Last Answer : Ounce-inches.

The apparent change in frequency or pitch because of motion is explained by what effect?

Description : The apparent change in frequency or pitch because of motion is explained by what effect?

Last Answer : The Doppler effect.

A point defect exhibiting an apparent gain in one direction will exhibit what, when measured in the opposite direction?

Description : A point defect exhibiting an apparent gain in one direction will exhibit what, when measured in the opposite direction?

Last Answer : An exaggerated loss.

Explain how a point defect may exhibit an apparent gain.

Description : Explain how a point defect may exhibit an apparent gain.

Last Answer : A point defect may exhibit apparent gain because the backscatter coefficient of the fiber present before the point defect is higher than that of the fiber present after.

The unit of apparent power in a purely inductive circuit is called the _____________. A. kva B. var C. emf D. watt

Description : The unit of apparent power in a purely inductive circuit is called the _____________. A. kva B. var C. emf D. watt

Last Answer : Answer: B

When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?

Description : When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?

Last Answer : When an installed optical fiber cable or cable plant is less than 50 meters in length.

When taking a voltage measurement, which lead of the voltmeter should you connect to the circuit first?

Description : When taking a voltage measurement, which lead of the voltmeter should you connect to the circuit first?

Last Answer : Ground.

On what range should you set the voltmeter prior to taking a voltage measurement?

Description : On what range should you set the voltmeter prior to taking a voltage measurement?

Last Answer : Highest.

What calibration label is used when actual measurement values must be known to use the test equipment?

Description : What calibration label is used when actual measurement values must be known to use the test equipment?

Last Answer : CALIBRATED—REFER TO REPORT.

What radar scope uses a range step for range measurement?

Description : What radar scope uses a range step for range measurement?

Last Answer : The A scope.

What is the primary measurement application for tuning forks?

Description : What is the primary measurement application for tuning forks?

Last Answer : They are used to monitor fixed motor speeds.

A transmission line is said to have distributed constants of inductance, capacitance, and resistance along the line. What units of measurement are used to express these constants?

Description : A transmission line is said to have distributed constants of inductance, capacitance, and resistance along the line. What units of measurement are used to express these constants?

Last Answer : Inductance is expressed in micro henrys per unit length, capacitance is expressed in picofarads per unit length, and resistance is expressed in ohms per unit length.

What term is used to express the measurement of the degree of mismatch between a line and its load?

Last Answer : Standing-wave ratio (swr).

When using an American Standard Wire Gauge to determine the size of a wire, where should you place the wire in the gauge to get the correct measurement?

Description : When using an American Standard Wire Gauge to determine the size of a wire, where should you place the wire in the gauge to get the correct measurement?

Last Answer : In the parallel walled slot not the circular area.

What other measurement can an ohmmeter make?

Description : What other measurement can an ohmmeter make?

Last Answer : Circuit continuity.

What range of an ammeter is selected for the final measurement?

Description : What range of an ammeter is selected for the final measurement?

Last Answer : A range that allows a meter reading near the center of the scale.

Why should you use the highest range of an ammeter for the initial measurement?

Description : Why should you use the highest range of an ammeter for the initial measurement?

Last Answer : To prevent damage to the meter movement from excessive current.

What are two ways that circuit measurement is used?

Description : What are two ways that circuit measurement is used?

Last Answer : Circuit measurement is used to (1) monitor the operation of a piece of electrical or electronic equipment and (2) determine the reason a piece of electrical or electronic equipment is not functioning properly.

Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. C. Inductive reactance varies directly with the frequency and the inductance. D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Description : Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. ... . D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Last Answer : Answer: C

Decreasing the frequency in a capacitive circuit while maintaining a constant circuit voltage, will result in a/an _____________. A. increase in apparent power B. decrease in circuit current C. decrease in capacitive reactance D. decrease in total impedance

Description : Decreasing the frequency in a capacitive circuit while maintaining a constant circuit voltage, will result in a/an _____________. A. increase in apparent power B. decrease in circuit current C. decrease in capacitive reactance D. decrease in total impedance

Last Answer : Answer: B

The apparent power in a purely inductive circuit is also known as _____________. A. true power B. lead power C. induced power D. reactive power

Description : The apparent power in a purely inductive circuit is also known as _____________. A. true power B. lead power C. induced power D. reactive power

Last Answer : Answer: D

Formulas : Apparent Power , Real Power , Power factor

Description : Formulas : Apparent Power , Real Power , Power factor

Last Answer : Formulas: Apparent Power = VI (Voltmeter reading x Ammeter reading) Real Power = VI Cos Ф (Watt meter reading) Power factor (Cos Ф) = Real Power / Apparent Power Indicated Power = Observed ... Power -Actual Power) x100 /Actual Power Actual Power = Voltmeter reading x Ammeter reading x Power factor

Explain the terms real power, apparent power and reactive power for ac circuits and also the units used.

Description : Explain the terms real power, apparent power and reactive power for ac circuits and also the units used.

Last Answer : Real Power: It is the product of voltage, current and power factor i.e. P = V I cos j and basic unit of real power is watt. i.e. Expressed as W or kW. Apparent power: It is the product of ... X current X sinj or Reactive power = V I sin j and has no other unit but expressed in VAR or KVAR.

The component of electric power which yields useful mechanical power output is known as a) apparent power b) active power c) reactive power d) none of the above

Description : The component of electric power which yields useful mechanical power output is known as a) apparent power b) active power c) reactive power d) none of the above

Last Answer : b) active power

Define: (i) Apparent power (ii) Real power

Description : Define: (i) Apparent power (ii) Real power

Last Answer : (i) Apparent power It is the product of rms values of applied voltage and circuit current. Unit: volt-ampere (VA) OR kilo-volt-ampere (kVA) OR Mega-volt-ampere (MVA) S = VI = I2 Z volt ... circuit. (OR) It is the power which is actually dissipated in the circuit resistance.

Use Voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in given R—C series circuit, draw phasor diagram.

Description : Use Voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in given R—C series circuit, draw phasor diagram.

Last Answer : Use Voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in given R-C series circuit, draw phasor diagram. Practical Significance In the industry environment ... autotransformer position to zero and switch OFF the supply. 8. Draw the phasor diagram.

Use Voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in given R-L series circuit, draw phasor diagram.

Description : Use Voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in given R-L series circuit, draw phasor diagram.

Last Answer : Practical Significance In the industry environment Electrical Engineering diploma graduate are expected to measure basic parameters like voltage, frequency, time period etc. for R-L series circuits. Therefore ... /varying L. 7. Draw the phasor diagram for each of reading for verification.

how to calculate apparent power

Last Answer : S=p/cosα Where α is the powerfactor

The product of apparent power and cosine of the phase angle between circuit voltage and current is?

Description : The product of apparent power and cosine of the phase angle between circuit voltage and current is?

Last Answer : In parllpar reasonans RLC circuit the current is

The apparent power drawn by an A.C. circuit is 10 kVA and active power is 8 kW. The reactive power in the circuit is?

Description : The apparent power drawn by an A.C. circuit is 10 kVA and active power is 8 kW. The reactive power in the circuit is?

Last Answer : The apparent power drawn by an A.C. circuit is 10 kVA and active power is 8 kW. The reactive power in the circuit is 6 kVAR.

The ratio of active power to apparent power is known as____ factor.

Description : The ratio of active power to apparent power is known as____ factor.

Last Answer : The ratio of active power to apparent power is known as power factor.

Active power and apparent power are represented by?

Description : Active power and apparent power are represented by?

Last Answer : Active power and apparent power are represented by kW and kVA.

Far-field power distributions describe the emitted power per unit area as a function of angle θ in the far-field region. Describe the far-field region.

Description : Far-field power distributions describe the emitted power per unit area as a function of angle θ in the far-field region. Describe the far-field region.

Last Answer : The far-field region is the region far from the fiber-end face.

Near-field power distributions describe the emitted power per unit area in the near-field region. Describe the near-field region

Description : Near-field power distributions describe the emitted power per unit area in the near-field region. Describe the near-field region

Last Answer : The near-field region is the region close to the fiber-end face.

‘Parsec’ is the unit of measurement of which distance? -Do You Know?

Description : ‘Parsec’ is the unit of measurement of which distance? -Do You Know?

Last Answer : answer:

What is Hard Disk Measurement Unit ?

Description : What is Hard Disk Measurement Unit ?

Last Answer : Hard disk measurement unit is gigabyte.

What is the unit of measurement ?

Description : What is the unit of measurement ?