Define receiver dynamic range.

Define receiver dynamic range.
by

1 Answer

Answer :

The range of optical power levels over which the receiver  operates within the specified values. It
by

Related questions

A loss of receiver sensitivity has the same effect on range performance as what other loss?

Description : A loss of receiver sensitivity has the same effect on range performance as what other loss?

Last Answer : Transmitter power loss.

Which preamplifier design (high-impedance or transimpedance) provides improvements in bandwidth and greater dynamic range with some degradation in sensitivity from an increase in noise?

Description : Which preamplifier design (high-impedance or transimpedance) provides improvements in bandwidth and greater dynamic range with some degradation in sensitivity from an increase in noise?

Last Answer : Transimpedance.

List the key operational parameters used to define receiver performance.

Description : List the key operational parameters used to define receiver performance.

Last Answer : Receiver sensitivity, bandwidth, and dynamic range.

What is the disadvantage of using a double receiver instead of two individual receivers?

Description : What is the disadvantage of using a double receiver instead of two individual receivers?

Last Answer : If one of the receivers goes bad the entire unit must be replaced.

When is a synchro receiver (TR) properly zeroed?

Description : When is a synchro receiver (TR) properly zeroed?

Last Answer : A TR is zeroed when electrical zero voltages exist across its stator windings at the same time its rotor is on zero or on its mechanical reference position.

What is the most likely problem if the transmitter shaft reads 0º when the receiver shaft indicates 180º?

Description : What is the most likely problem if the transmitter shaft reads 0º when the receiver shaft indicates 180º?

Last Answer : The rotor leads on either the transmitter or the receiver are reversed.

What two receiver leads are reversed to reverse the rotor's direction of rotation?

Description : What two receiver leads are reversed to reverse the rotor's direction of rotation?

Last Answer : 1 and S3.

What is the relationship between the transmitter and receiver stator voltages when their rotors are in correspondence?

Description : What is the relationship between the transmitter and receiver stator voltages when their rotors are in correspondence?

Last Answer : The voltages are equal and oppose each other.

What is the physical difference between a synchro transmitter and a synchro receiver?

Description : What is the physical difference between a synchro transmitter and a synchro receiver?

Last Answer : A synchro receiver uses some form of damping to retard excessive oscillations or spinning.

Receiver bandwidth is defined as those frequencies spread between what two points of the receiver response curve?

Description : Receiver bandwidth is defined as those frequencies spread between what two points of the receiver response curve?

Last Answer : Half-power points.

When measuring receiver sensitivity, what quantities must you add to the dBm reading obtained on the signal generator or test set?

Description : When measuring receiver sensitivity, what quantities must you add to the dBm reading obtained on the signal generator or test set?

Last Answer : Attenuations of the directional coupler and the connecting cable.

You determine receiver sensitivity by measuring the power level of what signal?

Description : You determine receiver sensitivity by measuring the power level of what signal?

Last Answer : Minimum discernible signal (mds).

Where should the transmitter spectrum be located with respect to the receiver response curve?

Description : Where should the transmitter spectrum be located with respect to the receiver response curve?

Last Answer : In the center.

A monopulse receiver has how many separate channels?

Description : A monopulse receiver has how many separate channels?

Last Answer : Three.

How does ftc affect receiver gain, if at all?

Description : How does ftc affect receiver gain, if at all?

Last Answer : FTC has no effect on receiver gain

Immediately after the transmitter fires, stc reduces the receiver gain to what level?

Description : Immediately after the transmitter fires, stc reduces the receiver gain to what level?

Last Answer : Zero.

Which receiver component converts the IF pulses to video pulses?

Description : Which receiver component converts the IF pulses to video pulses?

Last Answer : Detector.

What receiver circuit actually produces the IF frequency?

Description : What receiver circuit actually produces the IF frequency?

Last Answer : Mixer.

Which component of the receiver produces the signal that is mixed with the received signal to produce the IF signal?

Description : Which component of the receiver produces the signal that is mixed with the received signal to produce the IF signal?

Last Answer : Local oscillator.

What type of receiver is most often used in radar systems?

Description : What type of receiver is most often used in radar systems?

Last Answer : Superheterodyne.

What tube in a duplexer has the primary function of disconnecting the receiver?

Description : What tube in a duplexer has the primary function of disconnecting the receiver?

Last Answer : Tr tube.

what causes the initial and final pulses on the receiver output signal?

Description : what causes the initial and final pulses on the receiver output signal?

Last Answer : Leakage from the duplexer.

What is the result of an impedance mismatch between a receiver or transmitter and its transmission line or antenna?

Description : What is the result of an impedance mismatch between a receiver or transmitter and its transmission line or antenna?

Last Answer : High vswr, which equates to poor reception or a loss of power output.

Which amplifier stage (the preamplifier or the postamplifier) is a dominant contributor of noise and significantly influences the sensitivity of the receiver?

Description : Which amplifier stage (the preamplifier or the postamplifier) is a dominant contributor of noise and significantly influences the sensitivity of the receiver?

Last Answer : The preamplifier.

. Which part of the receiver amplifies the electrical signal to a level suitable for further signal processing?

Description : . Which part of the receiver amplifies the electrical signal to a level suitable for further signal processing?

Last Answer : Amplifier.

What is a fiber optic receiver?

Description : What is a fiber optic receiver?

Last Answer : An electro-optic device that accepts optical signals from an optical fiber and converts them into electrical signals

What is the main factor that determines receiver sensitivity?

Description : What is the main factor that determines receiver sensitivity?

Last Answer : Noise

List the main types of receiver noise.

Description : List the main types of receiver noise.

Last Answer : Thermal noise, dark current noise, and quantum noise

What is the function of a crystal filter in a receiver?

Description : What is the function of a crystal filter in a receiver?

Last Answer : It is used to achieve maximum selectivity.

What does a tone control circuit in a receiver do to the audio signal?

Description : What does a tone control circuit in a receiver do to the audio signal?

Last Answer : It controls the amount of bass and treble response.

What two components give a ssb receiver its advantages over an AM superheterodyne receiver?

Description : What two components give a ssb receiver its advantages over an AM superheterodyne receiver?

Last Answer : A special type of detector and a carrier reinsertion oscillator

What are the four basic receiver characteristics?

Description : What are the four basic receiver characteristics?

Last Answer : Sensitivity, noise, selectivity, and fidelity.

What four basic functions must a receiver perform?

Description : What four basic functions must a receiver perform?

Last Answer : Reception, selection, detection, and reproduction.

What is the purpose of agc/avc in a receiver?

Description : What is the purpose of agc/avc in a receiver?

Last Answer : To limit unwanted variations in the output.

What type of tuning does the receiver use?

Description : What type of tuning does the receiver use?

Last Answer : Digital

What function does a receiver transfer switchboard perform?

Description : What function does a receiver transfer switchboard perform?

Last Answer : Transfers receiver audio outputs to remote control stations.

What are the essential components of a cw receiver system?

Description : What are the essential components of a cw receiver system?

Last Answer : An antenna, tank circuit for tuning, rectifier for detection, filter to give constant output, and an indicator device

How do worn or sticking tape transport guides cause dynamic skew on a multi-track recorder?

Description : How do worn or sticking tape transport guides cause dynamic skew on a multi-track recorder?

Last Answer : The tape drifts past the multi-track head at an angle.

What is the difference between a dynamic microphone and a magnetic microphone?

Description : What is the difference between a dynamic microphone and a magnetic microphone?

Last Answer : A dynamic microphone has a moving coil and the magnetic microphone has a moving armature.

Deemphasis in the receiver in effect attenuates modulating signal components and noise in what frequency range? A. dc B. low C. intermediate D. high

Description : Deemphasis in the receiver in effect attenuates modulating signal components and noise in what frequency range? A. dc B. low C. intermediate D. high

Last Answer : D. high

The range of sequence number which is the concern of the receiver is called the receive sliding window. A. receive sliding window. B. sliding window C. frame buffer D. both a and b

Description : The range of sequence number which is the concern of the receiver is called the receive sliding window. A. receive sliding window. B. sliding window C. frame buffer D. both a and b

Last Answer : A. receive sliding window.

How To: High dynamic range imaging

Description : How To: High dynamic range imaging

Last Answer : http://www.tutorialblog.org/hdr-tutorials-roundup/

Determine the dynamic range for a 10 bit sign magnitude code. A. 1023 B. 425 C. 511 D. 756

Description : Determine the dynamic range for a 10 bit sign magnitude code. A. 1023 B. 425 C. 511 D. 756

Last Answer : C. 511

Dynamic vibration absorber is suitable for A varying speed machines B constant speed machines C Zero speed range machines D None of the mentioned

Description : Dynamic vibration absorber is suitable for A varying speed machines B constant speed machines C Zero speed range machines D None of the mentioned

Last Answer : B constant speed machines

Dynamic vibration absorber is suitable for A. Constant speed machines B. Varying speed machines C. Zero speed range machines D. None of the above

Description : Dynamic vibration absorber is suitable for A. Constant speed machines B. Varying speed machines C. Zero speed range machines D. None of the above

Last Answer : A. Constant speed machines

A steady state within the body is termed a) Homeostasis. When a change occurs that causes a body function to deviate from its stable range, processes are initiated to restore and maintain the steady state or homeostasis. b) Constancy. Constancy refers to the balanced internal state of the human body maintained by physiologic and biochemical processes. c) Adaptation. Adaptation refers to a constant, ongoing process that requires change in structure, function, or behavior so that the person is better suited to the environment. d) Stress. Stress refers to a state produced by a change in the environment that is perceived as challenging, threatening, or damaging to the person’s dynamic balance or equilibrium.

Description : A steady state within the body is termed a) Homeostasis. When a change occurs that causes a body function to deviate from its stable range, processes are initiated to restore and maintain ... that is perceived as challenging, threatening, or damaging to the person's dynamic balance or equilibrium.

Last Answer : a) Homeostasis. When a change occurs that causes a body function to deviate from its stable range, processes are initiated to restore and maintain the steady state or homeostasis.

Define selectivity and sensitivity of AM Receiver.

Description : Define selectivity and sensitivity of AM Receiver. 

Last Answer : Selectivity:-It needs to accept signals of the wanted frequency and reject other unwanted frequencies. Sensitivity:-The sensitivity of a radio receiver is its ability to amplify weak signals. It is ... the receiver input terminals to give a standard output power, measured at the output terminals. 

The frequency range of a waveguide is determined by what dimensions?

Description : The frequency range of a waveguide is determined by what dimensions?

Last Answer : . The "a" dimension.

What is the normal audible range of the human ear?

Description : What is the normal audible range of the human ear?

Last Answer : 20 Hz to 20 kHz.

On what range should you set the voltmeter prior to taking a voltage measurement?

Description : On what range should you set the voltmeter prior to taking a voltage measurement?

Last Answer : Highest.