What conditions must be met in order to balance a bridge circuit?

What conditions must be met in order to balance a bridge  circuit?
by

1 Answer

Answer :

A bridge circuit is balanced when the opposite legs of the  comparing and measuring circuits exhibit the same voltage drop.
by

Related questions

What type of service is NOT provided by the circuit shown in the illustration? EL-0094 A. Logging of engine order signals from the bridge. B. Printed record of alarms as they occur. C. Visual metering of temperature and pressure conditions. D. Periodic recording of pressure and temperature conditions.

Description : What type of service is NOT provided by the circuit shown in the illustration? EL-0094 A. Logging of engine order signals from the bridge. B. Printed record of alarms as they ... . Visual metering of temperature and pressure conditions. D. Periodic recording of pressure and temperature conditions.

Last Answer : Answer: A

How many conditions must be met to become alkaline ?

Last Answer : There are 2 conditions for alkalinity

To maintain the required balance of phase relationships and critical feeding, how must the end-fire array be constructed?

Description : To maintain the required balance of phase relationships and critical feeding, how must the end-fire array be constructed?

Last Answer : Symmetrically.

As I went over London Bridge I met my sister Jenny. I broke her neck and drank her blood And left her standing empty.What am I? -Riddles

Description : As I went over London Bridge I met my sister Jenny. I broke her neck and drank her blood And left her standing empty.What am I? -Riddles

Last Answer : Gin.

As I went across the bridge, I met a man with a load of wood which was neither straight nor crooked. What kind of wood was it? -Riddles

Description : As I went across the bridge, I met a man with a load of wood which was neither straight nor crooked. What kind of wood was it? -Riddles

Last Answer : Sawdust.

For an R-S FF to change output conditions, the inputs must be in what states?

Description : For an R-S FF to change output conditions, the inputs must be in what states?

Last Answer : 1 and 0, or opposite states.

Under what circuit conditions would the shunt detector be used?

Description : Under what circuit conditions would the shunt detector be used?

Last Answer : When the input voltage variations are too small to give a usable output from a series detector.

What are the three conditions that require circuit protection?

Description : What are the three conditions that require circuit protection?

Last Answer : A direct short, excessive current and excessive heat.

What must be done to a circuit before you can use an ohmmeter for testing?

Description : What must be done to a circuit before you can use an ohmmeter for testing?

Last Answer : It must be de-energized.

What must be used to test an activated circuit?

Description : What must be used to test an activated circuit?

Last Answer : Approved meters or other indicating devices

Before you connect a VOM in a circuit for an ohmmeter reading, in what condition must the circuit be?

Description : Before you connect a VOM in a circuit for an ohmmeter reading, in what condition must the circuit be?

Last Answer : De-energized

A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Description : A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Last Answer : 0.1 microfarads 40% from the graph = 0.5

Four members of a band are walking to a night concert. They decide to take a shortcut, but must cross a bridge. Luckily they have one flashlight. Because of the varying size of their instruments, it takes each member a different amount of time to cross the bridge - it takes the first person one minute, the second person two minutes, the third person five minutes and the fourth person ten minutes. They must cross the bridge in pairs, travelling at the slower speed so if the one minute person went with the ten minute person, it would take a total of ten minutes. Since there is only one flashlight, one person must come back across the bridge, then another pair can cross. They only have 17 minutes to cross the bridge and still get to the concert on time. What order should they cross to get eve

Description : Four members of a band are walking to a night concert. They decide to take a shortcut, but must cross a bridge. Luckily they have one flashlight. Because of the varying size of their instruments, it ... bridge and still get to the concert on time. What order should they cross to get eve -Riddles

Last Answer : First, the one minute person and the two minute person must cross the bridge, for a total of two minutes. Then the one minute person should come back with flashlight - total of three ... minutes) and gets the one minute person and they cross together bringing the total to seventeen minutes.

When these conditions are met what are you promised?

Description : When these conditions are met what are you promised?

Last Answer : what conditions do you mean

When is COIN successful when three general conditions are met?

Description : When is COIN successful when three general conditions are met?

Last Answer : Need answer

An electrical device which prevents an action from occurring until all other required conditions are met is called a/an ___________. A. limit B. monitor C. modulator D. interlock

Description : An electrical device which prevents an action from occurring until all other required conditions are met is called a/an ___________. A. limit B. monitor C. modulator D. interlock

Last Answer : Answer: D

The …………….. is code embedded in some legitimate program that is set to “explode” when certain conditions are met. a) Trap doors b) Trojan horse c) Logic Bomb d) Virus

Description : The …………….. is code embedded in some legitimate program that is set to “explode” when certain conditions are met. a) Trap doors b) Trojan horse c) Logic Bomb d) Virus

Last Answer : c) Logic Bomb

The …………….. is code embedded in some legitimate program that is set to “explode” when certain conditions are met. A) Trap doors B) Trojan horse C) Logic Bomb

Description : The …………….. is code embedded in some legitimate program that is set to “explode” when certain conditions are met. A) Trap doors B) Trojan horse C) Logic Bomb

Last Answer : C) Logic Bomb

. What primary condition must magnetic lines of force meet in order to exist?

Description : . What primary condition must magnetic lines of force meet in order to exist?

Last Answer : Magnetic lines of force must form a continuous closed loop.

In what state must the inputs to a NOR gate be in order to produce a logic 1 output?

Description : In what state must the inputs to a NOR gate be in order to produce a logic 1 output?

Last Answer : All inputs must be low.

What must be the state of the inputs to a NAND gate in order to produce a LOW output?

Description : What must be the state of the inputs to a NAND gate in order to produce a LOW output?

Last Answer : All inputs must be HIGH.

In single-phase alternators, in order for the voltages induced in all the armature windings to add together for a single output, how must the windings be connected?

Description : In single-phase alternators, in order for the voltages induced in all the armature windings to add together for a single output, how must the windings be connected?

Last Answer : In series.

What is the purpose of an order-wire circuit?

Description : What is the purpose of an order-wire circuit?

Last Answer : For operator-to-operator service messages and frequency changes.

When an unknown capacitance is tested with a bridge, what is the value of Cx if R1 equals 70 ohms, R2 equals 150 ohms, and Cs equals 550 microfarads?

Description : When an unknown capacitance is tested with a bridge, what is the value of Cx if R1 equals 70 ohms, R2 equals 150 ohms, and Cs equals 550 microfarads?

Last Answer : 256 microfarads.

When a bridge is used to measure resistance, what is the value of Rx if R1 equals 80 ohms, R2 equals 120 ohms, and R3 equals 280 ohms?

Description : When a bridge is used to measure resistance, what is the value of Rx if R1 equals 80 ohms, R2 equals 120 ohms, and R3 equals 280 ohms?

Last Answer : 420 ohms.

What main advantage does a bridge rectifier have over a conventional full-wave rectifier?

Description : What main advantage does a bridge rectifier have over a conventional full-wave rectifier?

Last Answer : The bridge rectifier can produce twice the voltage with the same size transformer.

When you are testing an inductor with a Hay bridge, the characteristics of the inductor are compared with what type of device?

Description : When you are testing an inductor with a Hay bridge, the characteristics of the inductor are compared with what type of device?

Last Answer : A standard capacitor

How does the supply voltage affect the accuracy of Wheatstone bridge measurements?

Description : How does the supply voltage affect the accuracy of Wheatstone bridge measurements?

Last Answer : As the supply voltage increases, bridge components may heat up and become less accurate.

When you are measuring a component using a bridge, what is the most common cause of inaccurate measurements?

Description : When you are measuring a component using a bridge, what is the most common cause of inaccurate measurements?

Last Answer : The capacitive and inductive characteristics of the test leads.

What main advantage does a bridge rectifier have over a conventional full-wave rectifier?

Description : What main advantage does a bridge rectifier have over a conventional full-wave rectifier?

Last Answer : The bridge rectifier can produce double the voltage with the same size transformer.

What condition produces the 10-kHz error signal generated by the metering bridge in the HP- 431C power meter?

Description : What condition produces the 10-kHz error signal generated by the metering bridge in the HP- 431C power meter?

Last Answer : An unbalance in the metering bridge.

A Hay bridge measures inductance by comparing an inductor to what component?

Description : A Hay bridge measures inductance by comparing an inductor to what component?

Last Answer : A capacitor.

Which is more accurate, the bridge- or reactance-type meter?

Description : Which is more accurate, the bridge- or reactance-type meter?

Last Answer : Bridge type.

In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the same NOR and NAND inputs D. have output conditions that are exact opposites to the output condition for OR and AND, respectively

Description : In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the ... . have output conditions that are exact opposites to the output condition for OR and AND, respectively

Last Answer : Answer: D

Two resistances are connected in the two gaps of a meter bridge. The balance point is `20 cm` from the zero end. When a resistance `15 Omega` is conne

Description : Two resistances are connected in the two gaps of a meter bridge. The balance point is `20 cm` from the zero end. When a resistance `15 Omega` is conne

Last Answer : Two resistances are connected in the two gaps of a meter bridge. The balance point is `20 cm` from the zero end. ... the value. A. 3 B. 6 C. 9 D. 12

Which of the following is an ex-ample for cantilever beam? (1) Diving board (2) Bridge (3) See-saw (4) Common balance

Description : Which of the following is an ex-ample for cantilever beam? (1) Diving board (2) Bridge (3) See-saw (4) Common balance

Last Answer : (2) Bridge Explanation: A cantilever is a beam anchored at only one end. The beam carries the load to the support where it is resisted by moment and shear stress. Cantilever ... with loads applied between the supports. Cantilevers are widely found in construction, notably in cantilever bridges.

Which of the following is an example for cantilever beam? (1) Diving board (2) Bridge (3) See-saw (4) Common balance

Description : Which of the following is an example for cantilever beam? (1) Diving board (2) Bridge (3) See-saw (4) Common balance

Last Answer : Bridge

In De Sauty Bridge (unmodified form) it is possible to obtain balance

Description : In De Sauty Bridge (unmodified form) it is possible to obtain balance (a) Even if both the capacitors are imperfect (b) If one of the capacitors is perfect (c) Only if both the capacitors are perfect (d) All of the above

Last Answer : In De Sauty Bridge (unmodified form) it is possible to obtain balance Only if both the capacitors are perfect

What criteria must be met for a cricket to chirp?

Description : What criteria must be met for a cricket to chirp?

Last Answer : Unless you find and terminate them, there's not much to do, that I know of, but perhaps someone else will have a better answer when it comes to getting rid of insects. Either way, male crickets ... mating season, (To attract females.) which is usually most of Summer, or at least its hottest period.

What criteria must be met so I can receive a minority grant or scholarship?

Description : What criteria must be met so I can receive a minority grant or scholarship?

Last Answer : The criteria depend on the award that you have. Some awards require a good amount of extracurricular activities while others require a GPA and others require a certain ethnicity.

What criteria must be met for Banded Gastric Bypass?

Description : What criteria must be met for Banded Gastric Bypass?

Last Answer : In order to be considered for lap band bypass you need to be older than 16, BMI greater than 35 and have a high risk diagnoses such as hypertension treated with medication or a Diabetic treated with medication.

Which of the following establishes key dates throughout thb. Ballpark estimate c. Pert diagram d. Slack chart e. Milestone schedulee life of a project that must be met for the project to finish on time? Select one: a. Critical path

Description : Which of the following establishes key dates throughout the life of a project that  must be met for the project to finish on time? Select one: a. Critical path b. Ballpark estimate c. Pert diagram d. Slack chart e. Milestone schedule

Last Answer : e. Milestone schedule

According to Maslow, which of the following categories of needs represents the most basic? a) Physiologic needs Physiologic needs must be met before an individual is able to move toward psychological health and well-being. b) Self-actualization Self-actualization is the highest level of need c) Safety and security needs Safety and security needs, while lower level, are not essential to physiologic survival. d) Belongingness Belongingness and affection needs are not essential to physiologic survival.

Description : According to Maslow, which of the following categories of needs represents the most basic? a) Physiologic needs Physiologic needs must be met before an individual is able to move ... physiologic survival. d) Belongingness Belongingness and affection needs are not essential to physiologic survival.

Last Answer : a) Physiologic needs Physiologic needs must be met before an individual is able to move toward psychological health and well-being.

Mention any two conditions that democracy must fulfil in order to achieve its outcome. -SST 10th

Description : Mention any two conditions that democracy must fulfil in order to achieve its outcome. -SST 10th

Last Answer : (i) It is necessary to understand that democracy is not simply a rule by majority opinion. The majority always needs to work with the minority so that government can function to represent the general view. ... only as long as every citizen has a chance of being in majority at some point of time.

In order to see the Hardy Weinberg equation to calculate genetic variation in a population conditions must exist in the population?

Description : In order to see the Hardy Weinberg equation to calculate genetic variation in a population conditions must exist in the population?

Last Answer : All organisms must reproduce

In the pitch control diagram shown in the illustration, what are the present plant operating conditions? EL-0095 A. One engine is on the line, cruise mode is selected and the engine room is in control. B. One engine is on the line, maneuvering mode is selected and the bridge is in control. C. Both engines are on line, cruise mode is selected and the bridge is in control. D. Both engines are on line, maneuvering mode is selected and the engine room is in control.

Description : In the pitch control diagram shown in the illustration, what are the present plant operating conditions? EL-0095 A. One engine is on the line, cruise mode is selected and the engine room is in control. ... . D. Both engines are on line, maneuvering mode is selected and the engine room is in control.

Last Answer : Answer: D

What are the plant conditions existing in the 'engine speed control' diagram shown in the illustration? EL-0096 A. The Bridge is in control in the 'auto. maneuver' mode. B. The Engine Room is in control in the 'cruise split' mode. C. The Bridge is in control in the 'auto. split' mode. D. The Engine Room is in control in the 'auto. maneuver' mode.

Description : What are the plant conditions existing in the 'engine speed control' diagram shown in the illustration? EL-0096 A. The Bridge is in control in the 'auto. maneuver' mode. B. The Engine Room is in control in ... in the 'auto. split' mode. D. The Engine Room is in control in the 'auto. maneuver' mode.

Last Answer : Answer: D

Under which of the listed conditions can the engine room retake the throttle control from the bridge? A. Any time it is deemed necessary. B. Only with the master's permission. C. After a 10 minute delay to the input command. D. Only after the throttle has been placed in stop.

Description : Under which of the listed conditions can the engine room retake the throttle control from the bridge? A. Any time it is deemed necessary. B. Only with the master's permission. C. After a 10 minute delay to the input command. D. Only after the throttle has been placed in stop.

Last Answer : Answer: A

The project team has just determined that the deadline for completion will not be met. In order to deliver a high quality system on schedule, the team has requested that the features be prioritized and that a fixed deadline be imposed for the project. This technique is referred to as SDLC methodology.

Description :  The project team has just determined that the deadline for completion will not be met.  In order to deliver a high quality system on schedule, the team has requested that the  features be ... that a fixed deadline be imposed for the project. This technique  is referred to as SDLC methodology.

Last Answer : Ans: False