What type of data transfer requires the most time?

What type of data transfer requires the most time?
by

1 Answer

Answer :

Serial.
by

Related questions

What type of ranging circuit is most often used with a radar that requires extremely accurate range data?

Description : What type of ranging circuit is most often used with a radar that requires extremely accurate range data?

Last Answer : Range gate or range step.

Simultaneous transfer of data may be accomplished with what type of register?

Description : Simultaneous transfer of data may be accomplished with what type of register?

Last Answer : Parallel.

An instrument that must be calibrated in place requires what type of calibration label?

Description : An instrument thAn instrumAn instrument that must be calibrated in place requires what type of calibration label?

Last Answer : SPECIAL CALIBRATION label.

What type of bias requires constant current flow through the cathode

Description : What type of bias requires constant current flow through the cathode

Last Answer : Cathode biasing.

What type of switch should be used to control a circuit that requires a temporary actuation signal?

Description : What type of switch should be used to control a circuit that requires a temporary actuation signal?

Last Answer : A momentary switch.

What type of prime mover requires a specially designed high-speed alternator?

Description : What type of prime mover requires a specially designed high-speed alternator?

Last Answer : Steam turbine.

Trade-offs between competing effects are necessary for high speed response. Which competing effect (fast transit time, low capacitance, or high quantum efficiency) requires a thin active area?

Description : Trade-offs between competing effects are necessary for high speed response. Which competing effect (fast transit time, low capacitance, or high quantum efficiency) requires a thin active area?

Last Answer : Fast transit time.

If the load in question 50 requires a voltage of +90 V, what should be the value of the bleeder resistor?

Description : If the load in question 50 requires a voltage of +90 V, what should be the value of the bleeder resistor?

Last Answer : 2 kΩ

Pulse-code modulation requires the use of approximations of value that are obtained by what process?

Description : Pulse-code modulation requires the use of approximations of value that are obtained by what process?

Last Answer : Quantization.

When a wave is reflected from a surface, energy is transferred. When is the transfer of energy greatest?

Description : When a wave is reflected from a surface, energy is transferred. When is the transfer of energy greatest?

Last Answer : When the incident wave is nearly parallel with the surface.

What is the main disadvantage of parallel transfer?

Description : What is the main disadvantage of parallel transfer?

Last Answer : Requires more circuitry.

What connecting link is used to transfer energy from a radio transmitter to its antenna located on

Description : What connecting link is used to transfer energy from a radio transmitter to its antenna located on

Last Answer : Transmission line.

What two specifications determine the maximum frequency that a recorder's record and reproduce heads will be able to transfer?

Description : What two specifications determine the maximum frequency that a recorder's record and reproduce heads will be able to transfer?

Last Answer : a. Size of the headgap. b. Speed of the magnetic tape.

What function does a receiver transfer switchboard perform?

Description : What function does a receiver transfer switchboard perform?

Last Answer : Transfers receiver audio outputs to remote control stations.

What capability does a transmitter transfer switchboard provide?

Description : What capability does a transmitter transfer switchboard provide?

Last Answer : Transferring remote control functions and signals to transmitters.

What is the efficiency of power transfer in question 30?

Description : What is the efficiency of power transfer in question 30?

Last Answer : 50 percent.

What condition gives maximum power transfer from the source to the load?

Description : What condition gives maximum power transfer from the source to the load?

Last Answer : When the load resistance equals the source resistance.

What impedance relationship between the output of one circuit and the input of another circuit will provide the maximum power transfer?

Description : What impedance relationship between the output of one circuit and the input of another circuit will provide the maximum power transfer?

Last Answer : Equal impedance.

What type of radar provides continuous range, bearing, and elevation data on an object?

Description : What type of radar provides continuous range, bearing, and elevation data on an object?

Last Answer : Track radar.

What type of source is generally used in high-data-rate digital applications?

Description : What type of source is generally used in high-data-rate digital applications?

Last Answer : Laser diode.

What type of source is typically used in low-data-rate digital applications?

Description : What type of source is typically used in low-data-rate digital applications?

Last Answer : LED.

What type of magnetic tape is used to record computer programs and data, and what are the additional thickness and quality standards for this type of tape?

Description : What type of magnetic tape is used to record computer programs and data, and what are the additional thickness and quality standards for this type of tape?

Last Answer : digital magnetic tape is for computer programs and data. Its base material is about 50% thicker. The tape’s surface must not have blemishes or coating flaws because losing even one digital data bit could ruin the recorded computer program or data.

What type of floppy disk is made to store data on both sides of the disk

Description : What type of floppy disk is made to store data on both sides of the disk

Last Answer : Double-sided.

What type of storage can retain its data even if there is a power failure or breakdown?

Description : What type of storage can retain its data even if there is a power failure or breakdown?

Last Answer : Nonvolatile (magnetic core storage and bubble memory are examples).

Data integrity control A. is used to set upper and lower limits on numeric data B. requires the use of passwords toprohibit unauthorized access tothe file C. has the data dictionary keep thedate and time of lastaccess last back-up,and most recent modificationfor all files D. All of theabove E. None of the above

Description : Data integrity control A. is used to set upper and lower limits on numeric data B. requires the use of passwords toprohibit unauthorized access tothe file C. has the data dictionary keep thedate and time ... back-up,and most recent modificationfor all files D. All of theabove E. None of the above

Last Answer : has the data dictionary keep thedate and time of lastaccess last back-up,and most recent modificationfor all files

Which question requires the collection of data to answer it?

Description : Which question requires the collection of data to answer it?

Last Answer : A. How many hours a day do dolphins sleep?B. Do dolphins make good pets?C. Are dolphins cuter than porpoises?D. Should dolphins be trained for military uses?

A first order reaction requires two unequal sized CSTR. Which of thefollowing gives higher yield?(A) Large reactor followed by smaller one(B) Smaller reactor followed by larger one(C) Either of the arrangement (A) or (B) will give the same yield(D) Data insufficient, can't be predicted

Description : A first order reaction requires two unequal sized CSTR. Which of thefollowing gives higher yield? (A) Large reactor followed by smaller one (B) Smaller reactor followed by larger one (C) Either of the arrangement (A) or (B) will give the same yield (D) Data insufficient, can't be predicted

Last Answer : (C) Either of the arrangement (A) or (B) will give the same yield

Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate or larger amounts of data (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order (D) The ratio of volumes of plug flow reactor to that of mixed reactor is always less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Description : Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate ... less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Last Answer : (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order

A ________ cloud requires virtualized storage to support the staging and storage of data. a) soft b) compute c) local d) none of the mentioned

Description : A ________ cloud requires virtualized storage to support the staging and storage of data. a) soft b) compute c) local d) none of the mentioned

Last Answer : compute

Point out the correct statement: 1) Different types of cloud computing service models provide different levels of security services 2) Adapting your on-premises systems to a cloud model requires that you determine what security mechanisms are required and mapping those to controls that exist in your chosen cloud service provider 3) Data should be transferred and stored in an encrypted format for security purpose A. 1,2,3 are correct B. only 1 is correct C. 2 and 3 are correct D. none are correct

Description : Point out the correct statement: 1) Different types of cloud computing service models provide different levels of security services 2) Adapting your on-premises systems to a cloud model requires that you determine what ... are correct B. only 1 is correct C. 2 and 3 are correct D. none are correct

Last Answer : 1,2,3 are correct

Point out the correct statement: 1) Different types of cloud computing service models provide different levels of security services 2) Adapting your on-premises systems to a cloud model requires that you determine what security mechanisms are required and mapping those to controls that exist in your chosen cloud service provider 3) Data should be transferred and stored in an encrypted format for security purpose A. 1,2,3 are correct B. only 1 is correct C. 2 and 3 are correct D. none are correct

Description : Point out the correct statement: 1) Different types of cloud computing service models provide different levels of security services 2) Adapting your on-premises systems to a cloud model requires that you determine what ... are correct B. only 1 is correct C. 2 and 3 are correct D. none are correct

Last Answer : 1,2,3 are correct

Point out the correct statement. a) Different types of cloud computing service models provide different levels of security services b) Adapting your on-premises systems to a cloud model requires that you determine what security mechanisms are required and mapping those to controls that exist in your chosen cloud service provider c) Data should be transferred and stored in an encrypted format for security purpose d) All of the mentioned

Description : Point out the correct statement. a) Different types of cloud computing service models provide different levels of security services b) Adapting your on-premises systems to a cloud model requires that ... be transferred and stored in an encrypted format for security purpose d) All of the mentioned

Last Answer : Data should be transferred and stored in an encrypted format for security purpose d) All of the mentioned

Publishing an application’s data as a REST service requires. a) @RequestMapping b) @PathVariable c) All of the mentioned d) None of the mentioned

Description : Publishing an application’s data as a REST service requires. a) @RequestMapping b) @PathVariable c) All of the mentioned d) None of the mentioned

Last Answer : All of the mentioned

method requires the following data pertaining annual flood series (i) Mean value (ii) Standard deviation (iii) Length of record (iv) Coefficient of skew The correct answer is (A) (i) and (ii) (B) (i),(i) and (iii) (C) (i), (ii) and (iv) (D) (i), (ii), (iii) and (iv)

Description : method requires the following data pertaining annual flood series (i) Mean value (ii) Standard deviation (iii) Length of record (iv) Coefficient of skew The correct answer is (A) (i) and (ii) (B) (i),(i) and (iii) (C) (i), (ii) and (iv) (D) (i), (ii), (iii) and (iv)

Last Answer : Answer: Option B

Is it more profitable for Company M to produce Q? I. Product R sells at a price four times that of Q II. One unit of Q requires 2 units of labour, while one unit of R requires 5 units of labour. There is a no other constraint on production. If the question can be answered with the help of statement I alone, If the question can be answered with the help of statement II alone, If both,statement I and statement II are needed to answer the question If the question cannot be answered even with the help of both the statements. If the data in either statement I or statement II alone is sufficient to answer the question

Description : Is it more profitable for Company M to produce Q? I. Product R sells at a price four times that of Q II. One unit of Q requires 2 units of labour, while one unit of R requires 5 ... both the statements. If the data in either statement I or statement II alone is sufficient to answer the question

Last Answer : from statement I : Let the price of product Q be P' Then the price of product R is 4P From Statement II: Cost of product Q =2 Cost of product R=5 Therefore, Profit percentage of product ... )=80P-100 Hence, product R is more profitable. Both statements are required to answer the question Answer :c

Is it more profitable for Company M to produce Q? I. Product R sells at a price four times that of Q II. One unit of Q requires 2 units of labour, while one unit of R requires 5 units of labour. There is a no other constraint on production. If the question can be answered with the help of statement I alone, If the question can be answered with the help of statement II alone, If both,statement I and statement II are needed to answer the question If the question cannot be answered even with the help of both the statements. If the data in either statement I or statement II alone is sufficient to answer the question

Description : Is it more profitable for Company M to produce Q? I. Product R sells at a price four times that of Q II. One unit of Q requires 2 units of labour, while one unit of R requires 5 ... both the statements. If the data in either statement I or statement II alone is sufficient to answer the question

Last Answer : from statement I : Let the price of product Q be P' Then the price of product R is 4P From Statement II: Cost of product Q =2 Cost of product R=5 Therefore, Profit percentage of product ... )=80P-100 Hence, product R is more profitable. Both statements are required to answer the question Answer :c

.............. requires that data should be made available to only authorized users. A) Data integrity B) Privacy C) Security D) None of the above

Description : .............. requires that data should be made available to only authorized users. A) Data integrity B) Privacy C) Security D) None of the above

Last Answer : C) Security

EDI requires a. representation of common business documents in computer readable forms b. data entry operators by receivers c. special value added networks d. special hardware at co-operating Business premises

Description : EDI requires a. representation of common business documents in computer readable forms b. data entry operators by receivers c. special value added networks d. special hardware at co-operating Business premises

Last Answer : a. representation of common business documents in computer readable forms