How many FFs would be required for an 8-bit shift register?

Description : A coherent binary phase shift keyed BPSK transmitter operates at a bit rate of 20 Mbps with a carrier to noise ratio C/N of 8.8dB. Find Eb/No. A. 73 dB B. 62.4 dB C. 81.8 dB D. 8.8 dB

Last Answer : D. 8.8 dB

How many clock pulses are required to output a 4-bit number in serial form?

Description : How many clock pulses are required to output a 4-bit number in serial form?

Last Answer : Four.

How many stages are required to store a 16-bit word?

Description : How many stages are required to store a 16-bit word?

Last Answer : 16.

Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Description : Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Last Answer : Receiver sensitivity.

A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Description : A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Last Answer : c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

How many bit of MAR register: a. 8-bit b. 16-bit c. 32-bit d. 64-bit

Description : How many bit of MAR register: a. 8-bit b. 16-bit c. 32-bit d. 64-bit

Last Answer : b. 16-bit

How many bit stored by status register: a. 1 bit b. 4 bit c. 6 bit d. 8 bit

Description : How many bit stored by status register: a. 1 bit b. 4 bit c. 6 bit d. 8 bit

Last Answer : a. 1 bit

8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register to register c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Description : 8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register ... c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Last Answer : c) 232 byte, five 8bit, register to register

The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Description : The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Last Answer : a) 8 byte, on-chip 128 byte RAM.

In 8087, _______ many register stack are there? And of _____ registers. These registers are used as _________ stack. a) 7, 40 bit, FIFO. b) 8, 60 bit, LILO. c) 8, 80 bit, LIFO d) 7, 80 bit, FILO.

Description : In 8087, _______ many register stack are there? And of _____ registers. These registers are used as _________ stack. a) 7, 40 bit, FIFO. b) 8, 60 bit, LILO. c) 8, 80 bit, LIFO d) 7, 80 bit, FILO.

Last Answer : b) 8, 60 bit, LILO.

8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register to register c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Description : 8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, ... c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Last Answer : d) 232 byte, six 8 bit, register to register

ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Description : ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Last Answer : c) 7H

A register capable of shifting its binary information either to the right or the left is called a_________ A. parallel register. B. serial register. C. shift register. D. storage register.

Description : A register capable of shifting its binary information either to the right or the left is called a_________ A. parallel register. B. serial register. C. shift register. D. storage register.

Last Answer : C. shift register.

The circuit shown in the illustration functions as a ____________. EL-0087 A. pulse trigger circuit for an operational amplifier B. three stage, high gain class 'A' amplifier C. binary ripple counter or shift register D. free running multivibrator

Description : The circuit shown in the illustration functions as a ____________. EL-0087 A. pulse trigger circuit for an operational amplifier B. three stage, high gain class 'A' amplifier C. binary ripple counter or shift register D. free running multivibrator

Last Answer : Answer: C

Which operation refer bitwise manipulation of contents of register: a. Logical micro operation b. Arithmetic micro operation c. Shift micro operation d. None of these

Description : Which operation refer bitwise manipulation of contents of register: a. Logical micro operation b. Arithmetic micro operation c. Shift micro operation d. None of these

Last Answer : a. Logical micro operation

Explain in detail about serial in serial out shift register.

Description : Explain in detail about serial in serial out shift register.

Last Answer : • Block diagram • Theoretical explanation • Logic diagram • Working

Shift Register

Description : Shift Register

Last Answer : Shift Register:- Shift Register is a group of flipflops used to shift data from one side to other side or to convert serial data into parallel or vice versa. Shift registers are of following types i) ... iii) Parallel in serial out(PISO) iv) Parallel in parallel out(PIPO)

A computer or device that uses 8-bit ASCII or EBCDIC will use how many bits to store each character?

Description : A computer or device that uses 8-bit ASCII or EBCDIC will use how many bits to store each character?

Last Answer : Nine.

By using an 8-bit code, how many characters or bit combinations can be represented?

Description : By using an 8-bit code, how many characters or bit combinations can be represented?

Last Answer : 256.

To increase the magnitude of a number by 23, you must shift the number how many times and in what direction?

Description : To increase the magnitude of a number by 23, you must shift the number how many times and in what direction?

Last Answer : Three to the left.

What causes the specified condition to shift position?

Description : What causes the specified condition to shift position?

Last Answer : The input, or clock pulse.

Why is a high-gain transistor used in the phase-shift oscillator?

Description : Why is a high-gain transistor used in the phase-shift oscillator?

Last Answer : Because of the losses encountered in the RC networks.

Which components provide the regenerative feedback signal in the phase-shift oscillator?

Description : Which components provide the regenerative feedback signal in the phase-shift oscillator?

Last Answer : Resistor-capacitor networks.

Armature reaction in a dc motor causes a shift of the neutral plane in which direction?

Description : Armature reaction in a dc motor causes a shift of the neutral plane in which direction?

Last Answer : Opposite the rotation.

Phase-shift keying is similar to what other two types of modulation?

Description : Phase-shift keying is similar to what other two types of modulation?

Last Answer : Cw and frequency-shift keying.

What type of modulation depends on the carrier-wave phase shift?

Description : What type of modulation depends on the carrier-wave phase shift?

Last Answer : Phase.

In a stick shift car, is it easier on the clutch to pop it and get some jerkiness, or to ride it a bit for a smoother transition?

Description : In a stick shift car, is it easier on the clutch to pop it and get some jerkiness, or to ride it a bit for a smoother transition?

Last Answer : answer:The clutch is designed to slip, but it's also designed to wear slightly over time. If you ride it too much you can conceivably wear it out in a couple of hours. If you decide to ... get familiar with the car faster and really lessen the chances of causing damage. Good luck with the dispute.

What term is used to describe a spread spectrum communications system in which a very fast binary bit stream is used to shift the phase of an RF carrier? A. Frequency hopping B. Direct sequence C. Binary phase-shift keying D. Phase compandored spread spectrum

Description : What term is used to describe a spread spectrum communications system in which a very fast binary bit stream is used to shift the phase of an RF carrier? A. Frequency hopping B. Direct sequence C. Binary phase-shift keying D. Phase compandored spread spectrum

Last Answer : B. Direct sequence

Which is data manipulation types are. a. Arithmetic instruction b. Shift instruction c. Logical and bit manipulation instructions d. All of these

Description : Which is data manipulation types are. a. Arithmetic instruction b. Shift instruction c. Logical and bit manipulation instructions d. All of these

Last Answer : d. All of these

In which instruction are used to perform Boolean operation on non-numerical data: a. Logical and bit manipulation b. Shift manipulation c. Circular manipulation d. None of these

Description : In which instruction are used to perform Boolean operation on non-numerical data: a. Logical and bit manipulation b. Shift manipulation c. Circular manipulation d. None of these

Last Answer : a. Logical and bit manipulation

Which operation is used to shift the content of an operand to one or more bits to provide necessary variation: a. Logical and bit manipulation b. Shift manipulation c. Circular manipulation d. None of these

Description : Which operation is used to shift the content of an operand to one or more bits to provide necessary variation: a. Logical and bit manipulation b. Shift manipulation c. Circular manipulation d. None of these

Last Answer : b. Shift manipulation

In the case of a right arithmetic shift the sign bit values are shifted to the a. Left b. Right Cc. Up d. Down

Description : In the case of a right arithmetic shift the sign bit values are shifted to the a. Left b. Right Cc. Up d. Down

Last Answer : a. Left

Simultaneous transfer of data may be accomplished with what type of register?

Description : Simultaneous transfer of data may be accomplished with what type of register?

Last Answer : Parallel.

In a computer is capable to store single binary bit. A) Capacitor B) Flip flop C) Register D) Inductor

Description : In a computer is capable to store single binary bit. A) Capacitor B) Flip flop C) Register D) Inductor

Last Answer : Answer : B

A micro operation every bit of a register is a: a. Constant b. Variable c. Both d. None

Description : A micro operation every bit of a register is a: a. Constant b. Variable c. Both d. None

Last Answer : b. Variable

every bit of register has. a 2 common line b 3 common line c. 1 common line d none of these

Description : every bit of register has. a 2 common line b 3 common line c. 1 common line d none of these

Last Answer : c. 1 common line

A ____is a group of devices that store digital data: a) circuits b) register c) bit d) None of The Above

Description : A ____is a group of devices that store digital data: a) circuits b) register c) bit d) None of The Above

Last Answer : b) register

The stack pointer in the 8085 microprocessor is a: a) 16 bit register that points to stack memory locations b) 16 bit accumulator c) Memory location in the stack d) None of The Above

Description : The stack pointer in the 8085 microprocessor is a: a) 16 bit register that points to stack memory locations b) 16 bit accumulator c) Memory location in the stack d) None of The Above

Last Answer : a) 16 bit register that points to stack memory locations

In a Computer_________ is capable to store single binary bit. 1) Capacitor 2) Flip Flop 3) Register 4) Inductor

Description : In a Computer_________ is capable to store single binary bit. 1) Capacitor 2) Flip Flop 3) Register 4) Inductor

Last Answer : 2) Flip Flop

Cost of storing a bit is minimum in 1. Cache 2. Register 3. RAM 4. Magnetic tape

Description : Cost of storing a bit is minimum in 1. Cache 2. Register 3. RAM 4. Magnetic tape

Last Answer : Ans-Magnetic Tape

In a Computer_________ is capable to store single binary bit. 1 Capacitor 2 Flip Flop 3 Register 4 Inductor

Description : In a Computer_________ is capable to store single binary bit. 1 Capacitor 2 Flip Flop 3 Register 4 Inductor

Last Answer : 2 Flip Flop

A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Description : A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Last Answer : a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory.

anonymous · Answer 1 · 2021-08-20T20:55:14+0000

Answer :

Eight.

answered Aug 20, 2021 by anonymous

How many FFs would be required for an 8-bit shift register?

Please log in or register to add a comment.

Please log in or register to answer this question.

1 Answer

Answer :

Please log in or register to add a comment.

Related questions