Description : A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored
Last Answer : a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory.
Description : A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer
Last Answer : c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer
Description : How many bit of MAR register: a. 8-bit b. 16-bit c. 32-bit d. 64-bit
Last Answer : b. 16-bit
Description : 8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register ... c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register
Last Answer : c) 232 byte, five 8bit, register to register
Description : The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,
Last Answer : a) 8 byte, on-chip 128 byte RAM.
Description : In 8087, _______ many register stack are there? And of _____ registers. These registers are used as _________ stack. a) 7, 40 bit, FIFO. b) 8, 60 bit, LILO. c) 8, 80 bit, LIFO d) 7, 80 bit, FILO.
Last Answer : b) 8, 60 bit, LILO.
Description : 8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, ... c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register
Last Answer : d) 232 byte, six 8 bit, register to register
Description : ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H
Last Answer : c) 7H
Description : A set of information that defines the status of resources allocated to a process is a. Process control b. ALU c. Register Unit d. Process description
Last Answer : d. Process description
Description : The status register is also called the____: a. Condition code register b. Flag register c. A and B d. None of these
Last Answer : c. A and B
Description : Which are the flags of status register: a. Over flow flag b. Carry flag c. Half carry flag d. Zero flag e. Interrupt flag f. Negative flag g. All of these
Last Answer : g. All of these
Description : In 8279, the keyboard entries are debounced and stored in an _________, that is further accessed by the CPU to read the key codes. a) 8-bit FIFO b) 8-byte FIFO c) 16 byte FIFO d) 16 bit FIFO
Last Answer : b) 8-byte FIFO
Description : The processor uses the stack to keep track of where the items are stored on it this by using the: a. Stack pointer register b. Queue pointer register c. Both a & b d. None of these
Last Answer : a. Stack pointer register
Description : The 16 bit register is separated into groups of 4 bit where each groups is called: a. BCD b. Nibble c. Half byte d. None of these
Last Answer : b. Nibble
Description : The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register
Last Answer : The microprocessor can read/write 16 bit data from or to memory
Description : The original ASCII code used…bits of each byte, reserving that last bit for error checking a. 5 b. 6 c. 7 d. 8
Last Answer : c. 7
Description : How many parts of dedicated register: a. 2 b. 4 c. 5 d. 6
Last Answer : c. 5
Description : Which processor provided 1 MB memory: a. 16-bit 8086 and 8088 b. 32-bit 8086 and 8088 c. 64-bit 8086 and 8088 d. 8-bit 8086 and 8088
Last Answer : a. 16-bit 8086 and 8088
Description : How many bit microprocessor developed by Intel: a. 4 bit b. 8 bit c. 32 bit d. 64 bit
Last Answer : b. 8 bit
Description : How many bit MC6800 microprocessor: a. 4-bit b. 8-bit c. 16-bit d. 32-bit
Last Answer : b. 8-bit
Description : Motorola introduced _____ processor: a. 2 bit-RISC b. 4 bit-RISC c. 8 bit-RISC d. 32 bit-RISC
Last Answer : d. 32 bit-RISC
Description : How many bit microprocessor in the era marked beginning of fourth generation: a. 4 bit b. 8 bit c. 16 bit d. 32 bit
Last Answer : d. 32 bit
Description : Third generation microprocessor is dominated by____ microprocessor: a. 8 bit b. 4 bit c. 16 bit d. 64 bit
Last Answer : c. 16 bit
Description : The beginning of very efficient____ microprocessor in second generation: a. 4-bit b. 8-bit c. 16-bit d. 64-bit
Description : For a memory with a 16-bit address space, the addressability is a. 16 bits b. 8 bits c. 2^16 bits d. Cannot be determined
Last Answer : d. Cannot be determined
Description : Which type of computers uses the 8-bit code called EBCDIC? a. Minicomputers b. Microcomputers c. Mainframe computers d. Super computer
Last Answer : c. Mainframe computers
Description : A 32 bit microprocessor has the word length equal to a. 2 byte b. 32 byte c. 4 byte d. 8 byte
Last Answer : c. 4 byte
Description : The data recording format in most of the modern magnetic tape is a. 7-bit ASCII b. 7-bit EBCDIC c. 8-bit ASCII d. 8-bit EBCDIC
Last Answer : d. 8-bit EBCDIC
Description : How bit microprocessor inexpensive a separate interface is provided with I/O device: a. 2 bit b. 4 bit c. 8 bit d. 32 bit
Last Answer : c. 8 bit
Description : The capacity of this chip is 1KB they are organized in the form of 1024 words with 8 bit word The what is the site of address bus: a. 8 bit b. 10 bit c. 12 bit d. 16 bit
Last Answer : b. 10 bit
Description : SP of 8051 is of ___ wide and it is loaded with the default value of ___ after reset. a) 2 byte, 08H b) 8 bit, 07H c) 1 byte, 09H d) 8 bit, 06H
Last Answer : d) 8 bit, 06H
Description : In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller
Last Answer : a) 1, 8bit, single processor
Description : Intel 8096 is of ___ bit microcontroller family called as ______. a) 8, MCS51 b) 16, MCS51 c) 8, MCS96 d) 16, MCS96
Last Answer : d) 16, MCS96
Description : The 8051 microcontroller is of ___pin package as a ______ processor. a) 30, 1byte b) 20, 1 byte c) 40, 8 bit
Last Answer : c) 40, 8 bit
Last Answer : c) 2, 9 bit, multiple processors
Description : The 8051 microcontroller is of ___pin package as a ______ processor. a) 30, 1byte b) 20, 1 byte c) 40, 8 bit d) 40, 8 byte
Description : Why 8085 processor is called an 8 bit processor? a) Because 8085 processor has 8 bit ALU. b) Because 8085 processor has 8 bit data bus. c) a & b.
Last Answer : a) Because 8085 processor has 8 bit ALU.
Description : The intel 8086 microprocessor is a _______ processor A. 8 bit B. 16 bit C. 32 bit D. 4 bit
Last Answer : The intel 8086 microprocessor is a 16 bit processor
Description : How many bit of instruction on our simple computer consist of one____: a. 2-bit b. 6-bit c. 12-bit d. None of these
Last Answer : c. 12-bit
Description : Which bit of TMOD will exactly configure timer / counter as a timer or counter. i) TMOD.6 of C/T for timer 1 ii) TMOD.6 of C/T for timer 0 iii) TMOD.2 of C/T for timer 0 iv) TMOD.2 of C/T for timer 1 a) i, ii b) ii, iv c) i, iii d) iii, iv
Last Answer : a) i, ii
Description : List the allowed register pairs of 8085.
Last Answer : • B-C register pair • D-E register pair • H-L register pair
Description : Which is an integral part of any microcomputer system and its primary purpose is to hold program and data: a. Memory unit b. Register unit c. A and B d. None of these
Last Answer : a. Memory unit
Description : Which is the components of microprocessor: a. Register unit b. Arithmetic and logical unit c. Timing and control unit d. All of these
Last Answer : d. All of these
Description : In immediate addressing the operand is placed a. in the CPU register b. after OP code in the instruction c. in memory d. in stack
Last Answer : b. after OP code in the instruction
Description : The most common addressing techiniques employed by a CPU is a. immediate b. direct c. indirect d. register e. all of the above
Last Answer : e. all of the above
Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory Address Register b. Memory Data Register c. Instruction Register d. Program Register
Last Answer : d. Program Register
Description : A structure that stores a number of bits taken "together as a unit" is a a. gate b. mux c. decoder d. register
Last Answer : d. register
Description : In 8051,After reset the SP register is initialized to address________. a. 8H b) 9H c) 7H
Description : In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set
Last Answer : (A) set, reset