Where are the external connections made on standard synchros?

Where are the external connections made on standard  synchros?
by

1 Answer

Answer :

At the terminal board.
by

Related questions

What two characteristics of IC synchros cause them to differ from standard synchros?

Description : What two characteristics of IC synchros cause them to differ from standard synchros?

Last Answer : Direction of rotation and amount of torque.

What type of synchros usually require the use of synchro capacitors?

Description : What type of synchros usually require the use of synchro capacitors?

Last Answer : TDXs, CDXs, and Cts.

What are the three types of control synchros?

Description : What are the three types of control synchros?

Last Answer : CX, CT, and CDX.

What are the two types of differential synchros?

Description : What are the two types of differential synchros?

Last Answer : The TDX and the TDR.

What is the purpose of using differential synchros instead of regular synchros?

Description : What is the purpose of using differential synchros instead of regular synchros?

Last Answer : Differential synchros can handle more signals than regular synchros and also perform addition and subtraction functions.

What type of equipment normally uses 26-volt 400-hertz synchros?

Description : What type of equipment normally uses 26-volt 400-hertz synchros?

Last Answer : . Aircraft.

Using table 1-1, name two synchros that provide a mechanical output.

Description : Using table 1-1, name two synchros that provide a mechanical output.

Last Answer : The torque receiver (TR) and the torque differential receiver (TDR).

Compare the power sources of synchros and step transmission systems.

Description : Compare the power sources of synchros and step transmission systems.

Last Answer : Synchros use ac; step transmission uses dc.

In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Description : In a TDX system with standard synchro connections, the TX rotor is at 120º and the TDX rotor is at 40º. What position will the TR indicate?

Last Answer : . 80º.

What is Synchros?

Description : What is Synchros?

Last Answer : Synchros is a device used to convert an angular motion to an electrical signal or vice versa.

What connections in a TDR system are reversed to set up the system for addition?

Description : What connections in a TDR system are reversed to set up the system for addition?

Last Answer : . The R1 and R3 leads between the TDR rotor and the TX to which it is connected.

What connections in a TDX system are reversed to set up the system for addition?

Description : What connections in a TDX system are reversed to set up the system for addition?

Last Answer : The number and type of synchro receivers, the mechanical loads on these receivers and the operating temperatures of both the transmitter and receivers.

In fiber-to-fiber connections, Fresnel reflection is one source of coupling losses. Light is reflected back into the source fiber and is lost. What causes Fresnel reflection?

Description : In fiber-to-fiber connections, Fresnel reflection is one source of coupling losses. Light is reflected back into the source fiber and is lost. What causes Fresnel reflection?

Last Answer : A step change in refractive index that occurs at fiber joints, caused by fiber separation.

Describe the differences between the rheostat connections and those of the potentiometer.

Description : Describe the differences between the rheostat connections and those of the potentiometer.

Last Answer : The rheostat may have two connections, one fixed and one moveable; the potentiometer always has three connections, one moveable and two fixed

Ships’ generators produce 450-volt, three-phase, ac power; however, most equipment uses 117-volt, single-phase power What transformers and connections are used to convert 450- volt, threephase power to 117-volt, single-phase power?

Description : Ships’ generators produce 450-volt, three-phase, ac power; however, most equipment uses 117-volt, single-phase power What transformers and connections are used to convert 450- volt, threephase power to 117-volt, single-phase power?

Last Answer : A method of generating oscillations, a method of turning the oscillations on and off (keying), and an antenna to radiate the energy.

Considering areas of concern, external network requirements, internal network requirements is the evaluation of a) Assess the security provisions for cloud applications b) Ensure cloud networks and connections are secure c) Manage people, roles and identities d) Understand the security requirements of the exit process

Description : Considering areas of concern, external network requirements, internal network requirements is the evaluation of a) Assess the security provisions for cloud applications b) Ensure cloud networks and ... Manage people, roles and identities d) Understand the security requirements of the exit process

Last Answer : Ensure cloud networks and connections are secure

The current from the stator of an alternator is taken out to the external load circuit through (A) slip rings. (B) commutator segments. (C) solid connections. (D) carbon brushes.

Description : The current from the stator of an alternator is taken out to the external load circuit through (A) slip rings. (B) commutator segments. (C) solid connections. (D) carbon brushes.

Last Answer : (C) solid connections.

An SCR without any external connections is considered as

Description : An SCR without any external connections is considered as (A) two diodes in series (B) three diodes in series (C) two n-p-n transistors in series (D) two p-n-p transistors in series

Last Answer : An SCR without any external connections is considered as three diodes in series

State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been the mainstay for data communications. 3). Point-to-Point Protocol (PPP) is a network-specific standard protocol with STD number 51. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Description : State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been ... . false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Last Answer : D. 1. true, 2. false, 3. true

The interaction between an external field and the binding force of an atom causes electrons to do what?

Description : The interaction between an external field and the binding force of an atom causes electrons to do what?

Last Answer : Wobble at a natural resonant frequency.

Current flow in a cell with no external load.

Description : Current flow in a cell with no external load.

Last Answer : Current flow in a cell with no external load.

Have you made some unexpected and welcome connections here?

Description : Have you made some unexpected and welcome connections here?

Last Answer : I found Allie. That is about it.

House connections to the laterals is generally made by A. R.C.C. B. P.C.C. C. Cast iron D. Glazed stonewares

Description : House connections to the laterals is generally made by A. R.C.C. B. P.C.C. C. Cast iron D. Glazed stonewares

Last Answer : ANS: D

In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded for 10 minutes to remove static charges. B. The transformer connections must be made as before with regard to the indicated polarity. C. The iron core of the transformer must be flashed to pre-magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Description : In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded ... magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Last Answer : Answer: B

In actual applications, electrical connections to 'R1-R2' of figure 'A' and to 'R1-R2- R3' of figure 'B' shown in the illustration are made by ______________. EL-0092 A. soldered contacts B. spliced and taped connections C. slip rings and brushes D. solderless crimp-on connectors

Description : In actual applications, electrical connections to 'R1-R2' of figure 'A' and to 'R1-R2- R3' of figure 'B' shown in the illustration are made by ______________. EL-0092 A. soldered contacts B. spliced and taped connections C. slip rings and brushes D. solderless crimp-on connectors

Last Answer : Answer: C

If ______ and ________ connections are made so that an error condition in 8087 can interrupt to the processor. a) BHE, RQ/GT1 b) BUSY, TEST c) INT, NMI d) RQ/GT0, RQ/GT1

Description : If ______ and ________ connections are made so that an error condition in 8087 can interrupt to the processor. a) BHE, RQ/GT1 b) BUSY, TEST c) INT, NMI d) RQ/GT0, RQ/GT1

Last Answer : c) INT, NMI

30°, 60° and 90° connections are made in a directional relay to render the relay

Description : 30°, 60° and 90° connections are made in a directional relay to render the relay (A) Sufficient torque under fault conditions (B) Zero torque under fault conditions (C) Current grading (D) Time grading

Last Answer : 30°, 60° and 90° connections are made in a directional relay to render the relay Sufficient torque under fault conditions

Using a standard microscope to inspect a fiber-end face, you observe that all parts of the fiberend face are in focus at the same time. Is the fiber-end face flat, concave, or convex?

Description : Using a standard microscope to inspect a fiber-end face, you observe that all parts of the fiberend face are in focus at the same time. Is the fiber-end face flat, concave, or convex?

Last Answer : Flat.

List the standard core sizes for multimode step-index, multimode graded-index, and single mode fibers

Description : List the standard core sizes for multimode step-index, multimode graded-index, and single mode fibers

Last Answer : Multimode step-index fibers: 50µm and 100µm. Multimode graded-index fibers: 50µm, 62.5µm, 85µm, and 100µm. Single mode fibers: between 8µm and 10µm.

When using an American Standard Wire Gauge to determine the size of a wire, where should you place the wire in the gauge to get the correct measurement?

Description : When using an American Standard Wire Gauge to determine the size of a wire, where should you place the wire in the gauge to get the correct measurement?

Last Answer : In the parallel walled slot not the circular area.

__________ an external bus standard used for transferring data to and from digital devices. A. Serial Port B. Firewire C. Parallel Port D. USB

Description : __________ an external bus standard used for transferring data to and from digital devices. A. Serial Port B. Firewire C. Parallel Port D. USB

Last Answer : D. USB

____ structures are typically used in businesses that primarily sell and produce standard products and seldom conduct external projects.

Description : ____ structures are typically used in businesses that primarily sell and produce standard  products and seldom conduct external projects.

Last Answer : Ans. Functional-type organisation

The external environment factor that includes: Factors that have a less immediate effect on a business such as the nation's rate of inflation or recession, unemployment rate, or standard of living, is (a) Political factors ; (b) Sociological factors ; (c) Indirect economic factors ; (d) Direct economic factors

Description : The external environment factor that includes: Factors that have a less immediate effect on a business such as the nation's rate of inflation or recession, unemployment rate, or standard of living, is ... ; (b) Sociological factors ; (c) Indirect economic factors ; (d) Direct economic factors

Last Answer : ; (c) Indirect economic factors ;

What connections do you see between the school system Horace Mann helped establish and today’s schools?

Description : What connections do you see between the school system Horace Mann helped establish and today’s schools?

Last Answer : We don't do homework but we can put you on the right path. Why don't you make a list from your textbook of Horace Mann's educational goals and ideas and then think about how they relate to ... know them. Who is in charge? Who designs the curriculum? What subjects are taught? How is it funded?

Is it just me or has your internet connection speed gone to hell since the FCC let the net neutrality lapse in favor of allowing the big media giants control access, connections and speed?

Description : Is it just me or has your internet connection speed gone to hell since the FCC let the net neutrality lapse in favor of allowing the big media giants control access, connections and speed?

Last Answer : It’s probably you.

Have you heard that the connections of Trump to the Russian mafia are more than rumors.

Description : Have you heard that the connections of Trump to the Russian mafia are more than rumors.

Last Answer : Rumors of that were active all during the election. and they still voted in the lying sack of shit

Should I voice my wishes for more genuine birthday connections, and not just Facebook birthday wishes?

Description : Should I voice my wishes for more genuine birthday connections, and not just Facebook birthday wishes?

Last Answer : answer:You should voice your desire, by phone or in person. If you are no longer a child living at home it is absolutely your responsibility to make it known that this is important to you. ... for a more personal connection, you will likely be rewarded for your efforts. Have a lovely birthday!

Where can I find a list of data connections?

Description : Where can I find a list of data connections?

Last Answer : I’m unclear on your question. Are you trying to find the technical specifications for these things? If so, I’d start with google vga technical specification to get something you can start to work with.

Those of you who believe in an immortal soul, how do you explain the physical connections to mental behavior?

Description : Those of you who believe in an immortal soul, how do you explain the physical connections to mental behavior?

Last Answer : answer:You are making a mistaken assumption. The soul doesn’t control or influence the brain or the physical, you’re conflating spiritual center with the physical body. Our behavior is not ruled by our souls.

How likely do people get a job interview through connections?

Description : How likely do people get a job interview through connections?

Last Answer : answer:Have you tried walking into the store and asking to speak to a manager about a job? That's how I was hired by The Limited a couple of times. She doesn't need to be senior to put your resume in front ... it she can just lie if she doesn't feel able to say it to your face. I think ask her.

Redirect all internet connections to one website?

Description : Redirect all internet connections to one website?

Last Answer : Yes, it’s a “man in the middle attack”, you can do almost anything. Replace websites, do phishing… or better yet just prank people and tell them to patch their holes :)

Why do my connections keep timing out before I connect to the website?

Description : Why do my connections keep timing out before I connect to the website?

Last Answer : Web congestion? Bad connection if it is phone line dial-up modem.

What global connections can you make from being dependent on technology?

Description : What global connections can you make from being dependent on technology?

Last Answer : answer:The US actually lags the rest of the world in cell phone technology; other countries have been using sell phones to transfer money to friends, pay bills, etc. lots of things that the US do by debit ... half a gig memory. You can now buy a thumb drive 16 times that size for $18. Go figure.

Can you use two (or more) NIC cards and use multiple internet connections?

Description : Can you use two (or more) NIC cards and use multiple internet connections?

Last Answer : answer:Yes, you can and most business enterprises will have several NIC’s in one server. (Load balancer, Teamed Nic’s, heartbeat, EBR, ILO, etc.). VM and Hyper-V play a different role, but explain what you are trying to solve…. .What is it you want to do?

Could I connect to 2 internet connections for downloading?

Description : Could I connect to 2 internet connections for downloading?

Last Answer : I don’t think so. I believe that the pathways don’t combine to increase either. You’d simply be downloading the same thing twice simultaneously, using both pathways at their individual speeds.

My computer won't let me type in passwords for security-enabled wireless connections.

Description : My computer won't let me type in passwords for security-enabled wireless connections.

Last Answer : answer:Recently I had that problem. The cause turned out to be a setting on the wireless router. —The router setting was “802.11n-only” —The computer had an older 802.11g wireless card —The fix was changing the router setting to “802.11n and 802.11g”.

Is there any advantage or disadvantage to having two internet connections open simultaneously?

Description : Is there any advantage or disadvantage to having two internet connections open simultaneously?

Last Answer : You can aggregate bandwidth, but it is not terribly straightforward. If you are interested I’ll try to find you the link.

Television connections - scart and hdmi?

Description : Television connections - scart and hdmi?

Last Answer : If you have hdmi sockets on your external devices you should use hdmi since it's the future and even the present. There might still be devices such as digital tv boxes without hdmi, but if you put ... for the ones with at least 2 hdmi. You might get external devices in a near future using hdmi.

Is there any hope for updating my Garmin if I don't have the original connections?

Description : Is there any hope for updating my Garmin if I don't have the original connections?

Last Answer : I have a TomTom so this may not apply, but it seems to me that you should still be able to use your gps whether it needs an update or not. What you describe sounds more like a battery that needs charging.

Is it easier to form deep, meaningful connections when you belong rather than when you do not?

Description : Is it easier to form deep, meaningful connections when you belong rather than when you do not?

Last Answer : Thats a loooooong story!. my very short answer is…..it does not matter where people live, language or looks, if the love is there, then go for it.